1 files changed, 161 insertions, 0 deletions
diff --git a/src/southbridge/intel/common/smi.c b/src/southbridge/intel/common/smi.c
new file mode 100644
index 0000000000..deaecb2625
--- /dev/null
+++ b/src/southbridge/intel/common/smi.c
@@ -0,0 +1,161 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <cpu/cpu.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/smm.h>
+#include <cpu/intel/smm/gen1/smi.h>
+
+#include "pmutil.h"
+
+#define DEBUG_PERIODIC_SMIS 0
+
+static u16 pmbase;
+
+u16 get_pmbase(void)
+{
+	return pmbase;
+}
+
+void southbridge_smm_init(void)
+{
+	u32 smi_en;
+	u16 pm1_en;
+	u32 gpe0_en;
+
+#if IS_ENABLED(CONFIG_ELOG)
+	/* Log events from chipset before clearing */
+	pch_log_state();
+#endif
+
+	printk(BIOS_DEBUG, "Initializing southbridge SMI...");
+
+	pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)),
+						D31F0_PMBASE) & 0xff80;
+
+	printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase);
+
+	smi_en = inl(pmbase + SMI_EN);
+	if (smi_en & APMC_EN) {
+		printk(BIOS_INFO, "SMI# handler already enabled?\n");
+		return;
+	}
+
+	printk(BIOS_DEBUG, "\n");
+	dump_smi_status(reset_smi_status());
+	dump_pm1_status(reset_pm1_status());
+	dump_gpe0_status(reset_gpe0_status());
+	dump_alt_gp_smi_status(reset_alt_gp_smi_status());
+	dump_tco_status(reset_tco_status());
+
+	/* Disable GPE0 PME_B0 */
+	gpe0_en = inl(pmbase + GPE0_EN);
+	gpe0_en &= ~PME_B0_EN;
+	outl(gpe0_en, pmbase + GPE0_EN);
+
+	pm1_en = 0;
+	pm1_en |= PWRBTN_EN;
+	pm1_en |= GBL_EN;
+	outw(pm1_en, pmbase + PM1_EN);
+
+	/* Enable SMI generation:
+	 *  - on TCO events
+	 *  - on APMC writes (io 0xb2)
+	 *  - on writes to SLP_EN (sleep states)
+	 *  - on writes to GBL_RLS (bios commands)
+	 * No SMIs:
+	 *  - on microcontroller writes (io 0x62/0x66)
+	 */
+
+	smi_en = 0; /* reset SMI enables */
+
+#if 0
+	smi_en |= LEGACY_USB2_EN | LEGACY_USB_EN;
+#endif
+	smi_en |= TCO_EN;
+	smi_en |= APMC_EN;
+#if DEBUG_PERIODIC_SMIS
+	/* Set DEBUG_PERIODIC_SMIS in pch.h to debug using
+	 * periodic SMIs.
+	 */
+	smi_en |= PERIODIC_EN;
+#endif
+	smi_en |= SLP_SMI_EN;
+#if 0
+	smi_en |= BIOS_EN;
+#endif
+
+	/* The following need to be on for SMIs to happen */
+	smi_en |= EOS | GBL_SMI_EN;
+
+	outl(smi_en, pmbase + SMI_EN);
+}
+
+void southbridge_trigger_smi(void)
+{
+	/**
+	 * There are several methods of raising a controlled SMI# via
+	 * software, among them:
+	 *  - Writes to io 0xb2 (APMC)
+	 *  - Writes to the Local Apic ICR with Delivery mode SMI.
+	 *
+	 * Using the local apic is a bit more tricky. According to
+	 * AMD Family 11 Processor BKDG no destination shorthand must be
+	 * used.
+	 * The whole SMM initialization is quite a bit hardware specific, so
+	 * I'm not too worried about the better of the methods at the moment
+	 */
+
+	/* raise an SMI interrupt */
+	printk(BIOS_SPEW, "  ... raise SMI#\n");
+	outb(0x00, 0xb2);
+}
+
+void southbridge_clear_smi_status(void)
+{
+	/* Clear SMI status */
+	reset_smi_status();
+
+	/* Clear PM1 status */
+	reset_pm1_status();
+
+	/* Set EOS bit so other SMIs can occur. */
+	smi_set_eos();
+}
+
+void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
+{
+	/*
+	 * Issue SMI to set the gnvs pointer in SMM.
+	 * tcg and smi1 are unused.
+	 *
+	 * EAX = APM_CNT_GNVS_UPDATE
+	 * EBX = gnvs pointer
+	 * EDX = APM_CNT
+	 */
+	asm volatile (
+		"outb %%al, %%dx\n\t"
+		: /* ignore result */
+		: "a" (APM_CNT_GNVS_UPDATE),
+		  "b" ((u32)gnvs),
+		  "d" (APM_CNT)
+	);
+}