diff options
Diffstat (limited to 'src/southbridge/dmp/vortex86ex/southbridge.c')
| -rw-r--r-- | src/southbridge/dmp/vortex86ex/southbridge.c | 55 |
1 files changed, 46 insertions, 9 deletions
diff --git a/src/southbridge/dmp/vortex86ex/southbridge.c b/src/southbridge/dmp/vortex86ex/southbridge.c index 28fe3c933e..a22fe6a3b7 100644 --- a/src/southbridge/dmp/vortex86ex/southbridge.c +++ b/src/southbridge/dmp/vortex86ex/southbridge.c @@ -46,18 +46,31 @@ static const unsigned char irq_to_int_routing[16] = { #define RT0_IRQ_SHIFT 0 /* S/B Extend PCI Interrupt routing table reg(0xb4) field bit shift. */ +#define CAN_IRQ_SHIFT 28 +#define HDA_IRQ_SHIFT 20 #define USBD_IRQ_SHIFT 16 #define SIDE_IRQ_SHIFT 12 #define PIDE_IRQ_SHIFT 8 +/* S/B function 1 Extend PCI Interrupt routing table reg 2(0xb4) + * field bit shift. + */ +#define SPI1_IRQ_SHIFT 8 +#define MOTOR_IRQ_SHIFT 0 + /* in-chip PCI device IRQs(0 for disabled). */ #define EHCII_IRQ 5 #define OHCII_IRQ 5 #define MAC_IRQ 6 -#define USBD_IRQ 0 +#define CAN_IRQ 10 +#define HDA_IRQ 7 +#define USBD_IRQ 6 #define PIDE_IRQ 5 +#define SPI1_IRQ 10 +#define MOTOR_IRQ 11 + /* RT0-3 IRQs. */ #define RT3_IRQ 3 #define RT2_IRQ 4 @@ -179,9 +192,11 @@ static void pci_routing_fixup(struct device *dev) int_routing |= irq_to_int_routing[EHCII_IRQ] << EHCIH_IRQ_SHIFT; int_routing |= irq_to_int_routing[OHCII_IRQ] << OHCII_IRQ_SHIFT; int_routing |= irq_to_int_routing[MAC_IRQ] << MAC_IRQ_SHIFT; - pci_write_config32(dev, SB_REG_PIRQ_X_ROUT, int_routing); + pci_write_config32(dev, SB_REG_PIRQ_ROUTE, int_routing); /* Setup S/B PCI Extend Interrupt routing table reg(0xb4). */ + ext_int_routing |= irq_to_int_routing[CAN_IRQ] << CAN_IRQ_SHIFT; + ext_int_routing |= irq_to_int_routing[HDA_IRQ] << HDA_IRQ_SHIFT; ext_int_routing |= irq_to_int_routing[USBD_IRQ] << USBD_IRQ_SHIFT; #if CONFIG_IDE_NATIVE_MODE /* IDE in native mode, only uses one IRQ. */ @@ -192,7 +207,7 @@ static void pci_routing_fixup(struct device *dev) ext_int_routing |= irq_to_int_routing[IDE2_LEGACY_IRQ] << SIDE_IRQ_SHIFT; ext_int_routing |= irq_to_int_routing[IDE1_LEGACY_IRQ] << PIDE_IRQ_SHIFT; #endif - pci_write_config32(dev, SB_REG_PIRQ_X_ROUT2, ext_int_routing); + pci_write_config32(dev, SB_REG_EXT_PIRQ_ROUTE, ext_int_routing); /* Assign in-chip PCI device IRQs. */ if (MAC_IRQ) { @@ -208,6 +223,14 @@ static void pci_routing_fixup(struct device *dev) unsigned char irqs[4] = { PIDE_IRQ, 0, 0, 0 }; pci_assign_irqs(0, 0xc, irqs); } + if (CAN_IRQ) { + unsigned char irqs[4] = { CAN_IRQ, 0, 0, 0 }; + pci_assign_irqs(0, 0x11, irqs); + } + if (HDA_IRQ) { + unsigned char irqs[4] = { HDA_IRQ, 0, 0, 0 }; + pci_assign_irqs(0, 0xe, irqs); + } if (USBD_IRQ) { unsigned char irqs[4] = { USBD_IRQ, 0, 0, 0 }; pci_assign_irqs(0, 0xf, irqs); @@ -514,14 +537,28 @@ static void vortex86_sb_read_resources(device_t dev) vortex86_sb_set_spi_flash_size(dev, flash_size); } +static void southbridge_init_func1(struct device *dev) +{ + /* Handle S/B function 1 PCI IRQ routing. (SPI1/MOTOR) */ + u32 ext_int_routing2 = 0; + /* Setup S/B function 1 PCI Extend Interrupt routing table reg 2(0xb4). */ + ext_int_routing2 |= irq_to_int_routing[SPI1_IRQ] << SPI1_IRQ_SHIFT; + ext_int_routing2 |= irq_to_int_routing[MOTOR_IRQ] << MOTOR_IRQ_SHIFT; + pci_write_config32(dev, SB1_REG_EXT_PIRQ_ROUTE2, ext_int_routing2); + + /* Assign in-chip PCI device IRQs. */ + if (SPI1_IRQ || MOTOR_IRQ) { + unsigned char irqs[4] = { MOTOR_IRQ, SPI1_IRQ, 0, 0 }; + pci_assign_irqs(0, 0x10, irqs); + } +} + static void southbridge_init(struct device *dev) { - if (dev->device == 0x6011) { - /* It is EX CPU southbridge */ - if (get_pci_dev_func(dev) != 0) { - /* only for function 0, skip function 1 */ - return; - } + /* Check it is function 0 or 1. (Same Vendor/Device ID) */ + if (get_pci_dev_func(dev) != 0) { + southbridge_init_func1(dev); + return; } upload_dmp_keyboard_firmware(dev); vortex_sb_init(dev); |