diff options
Diffstat (limited to 'src/southbridge/amd')
| -rw-r--r-- | src/southbridge/amd/sb700/sata.c | 99 |
1 files changed, 53 insertions, 46 deletions
diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c index c61fa01953..ae4444600b 100644 --- a/src/southbridge/amd/sb700/sata.c +++ b/src/southbridge/amd/sb700/sata.c @@ -297,65 +297,72 @@ static void sata_init(struct device *dev) if (port_count > max_port_count) port_count = max_port_count; - if (!sata_ahci_mode) { - /* RPR7.7 SATA drive detection. */ - /* Use BAR5+0x128,BAR0 for Primary Slave */ - /* Use BAR5+0x1A8,BAR0 for Primary Slave */ - /* Use BAR5+0x228,BAR2 for Secondary Master */ - /* Use BAR5+0x2A8,BAR2 for Secondary Slave */ - /* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary Master emulation */ - /* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */ - for (i = 0; i < port_count; i++) { + /* RPR7.7 SATA drive detection. */ + /* Use BAR5+0x128,BAR0 for Primary Slave */ + /* Use BAR5+0x1A8,BAR0 for Primary Slave */ + /* Use BAR5+0x228,BAR2 for Secondary Master */ + /* Use BAR5+0x2A8,BAR2 for Secondary Slave */ + /* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary Master emulation */ + /* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */ + for (i = 0; i < port_count; i++) { + byte = read8(sata_bar5 + 0x128 + 0x80 * i); + printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); + byte &= 0xF; + if (byte == 0x1) { + /* If the drive status is 0x1 then we see it but we aren't talking to it. */ + /* Try to do something about it. */ + printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n"); + + /* Read in Port-N Serial ATA Control Register */ + byte = read8(sata_bar5 + 0x12C + 0x80 * i); + + /* Set Reset Bit and 1.5g bit */ + byte |= 0x11; + write8((sata_bar5 + 0x12C + 0x80 * i), byte); + + /* Wait 1ms */ + mdelay(1); + + /* Clear Reset Bit */ + byte &= ~0x01; + write8((sata_bar5 + 0x12C + 0x80 * i), byte); + + /* Wait 1ms */ + mdelay(1); + + /* Reread status */ byte = read8(sata_bar5 + 0x128 + 0x80 * i); printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); byte &= 0xF; - if (byte == 0x1) { - /* If the drive status is 0x1 then we see it but we aren't talking to it. */ - /* Try to do something about it. */ - printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n"); - - /* Read in Port-N Serial ATA Control Register */ - byte = read8(sata_bar5 + 0x12C + 0x80 * i); - - /* Set Reset Bit and 1.5g bit */ - byte |= 0x11; - write8((sata_bar5 + 0x12C + 0x80 * i), byte); - - /* Wait 1ms */ - mdelay(1); - - /* Clear Reset Bit */ - byte &= ~0x01; - write8((sata_bar5 + 0x12C + 0x80 * i), byte); - - /* Wait 1ms */ - mdelay(1); + } - /* Reread status */ - byte = read8(sata_bar5 + 0x128 + 0x80 * i); - printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); - byte &= 0xF; + if (byte == 0x3) { + for (j = 0; j < 10; j++) { + if (i < 4) + current_bar = ((i / 2) == 0) ? sata_bar0 : sata_bar2; + else + current_bar = ide_bar0; + if (!sata_drive_detect(i, current_bar)) + break; } - - if (byte == 0x3) { - for (j = 0; j < 10; j++) { - if (i < 4) - current_bar = ((i / 2) == 0) ? sata_bar0 : sata_bar2; - else - current_bar = ide_bar0; - if (!sata_drive_detect(i, current_bar)) - break; - } + if (sata_ahci_mode) + printk(BIOS_DEBUG, "AHCI device %d is %sready after %i tries\n", + i, + (j == 10) ? "not " : "", + (j == 10) ? j : j + 1); + else printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n", (i / 2) ? "Secondary" : "Primary", (i % 2 ) ? "Slave" : "Master", (j == 10) ? "not " : "", (j == 10) ? j : j + 1); - } else { + } else { + if (sata_ahci_mode) + printk(BIOS_DEBUG, "No AHCI SATA drive on Slot%i\n", i); + else printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n", (i / 2) ? "Secondary" : "Primary", (i % 2 ) ? "Slave" : "Master", i); - } } } |