diff options
Diffstat (limited to 'src/southbridge/amd')
22 files changed, 3379 insertions, 0 deletions
diff --git a/src/southbridge/amd/Kconfig b/src/southbridge/amd/Kconfig index 59b072ac79..add4045753 100644 --- a/src/southbridge/amd/Kconfig +++ b/src/southbridge/amd/Kconfig @@ -10,3 +10,4 @@ source src/southbridge/amd/rs690/Kconfig source src/southbridge/amd/sb600/Kconfig source src/southbridge/amd/rs780/Kconfig source src/southbridge/amd/sb700/Kconfig +source src/southbridge/amd/sb800/Kconfig diff --git a/src/southbridge/amd/Makefile.inc b/src/southbridge/amd/Makefile.inc index 9a7f87ca55..b473157e4c 100644 --- a/src/southbridge/amd/Makefile.inc +++ b/src/southbridge/amd/Makefile.inc @@ -6,6 +6,7 @@ subdirs-$(CONFIG_SOUTHBRIDGE_AMD_RS690) += rs690 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_SB600) += sb600 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_RS780) += rs780 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_SB700) += sb700 +subdirs-$(CONFIG_SOUTHBRIDGE_AMD_SB800) += sb800 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_CS5530) += cs5530 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_CS5535) += cs5535 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_CS5536) += cs5536 diff --git a/src/southbridge/amd/sb800/Kconfig b/src/southbridge/amd/sb800/Kconfig new file mode 100644 index 0000000000..1afd242d35 --- /dev/null +++ b/src/southbridge/amd/sb800/Kconfig @@ -0,0 +1,42 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config SOUTHBRIDGE_AMD_SB800 + bool + select IOAPIC + select HAVE_USBDEBUG + select TINY_BOOTBLOCK + +config BOOTBLOCK_SOUTHBRIDGE_INIT + string + default "southbridge/amd/sb800/bootblock.c" + depends on SOUTHBRIDGE_AMD_SB800 + +config SOUTHBRIDGE_AMD_SB800_SKIP_ISA_DMA_INIT + bool + default n + depends on SOUTHBRIDGE_AMD_SB800 + +config EHCI_BAR + hex + default 0xfef00000 if SOUTHBRIDGE_AMD_SB800 + +config EHCI_DEBUG_OFFSET + hex + default 0xe0 if SOUTHBRIDGE_AMD_SB800 diff --git a/src/southbridge/amd/sb800/Makefile.inc b/src/southbridge/amd/sb800/Makefile.inc new file mode 100644 index 0000000000..7a42fdd4d8 --- /dev/null +++ b/src/southbridge/amd/sb800/Makefile.inc @@ -0,0 +1,12 @@ +driver-y += sb800.c +driver-y += usb.c +driver-y += lpc.c +driver-y += sm.c +driver-y += ide.c +driver-y += sata.c +driver-y += hda.c +driver-y += pci.c +driver-y += pcie.c +ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.c +ramstage-y += reset.c +romstage-y += enable_usbdebug.c diff --git a/src/southbridge/amd/sb800/bootblock.c b/src/southbridge/amd/sb800/bootblock.c new file mode 100644 index 0000000000..7a67a946d8 --- /dev/null +++ b/src/southbridge/amd/sb800/bootblock.c @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <arch/io.h> +#include <arch/romcc_io.h> +#include <device/pci_ids.h> + +/* + * Enable 4MB (LPC) ROM access at 0xFFC00000 - 0xFFFFFFFF. + * + * Hardware should enable LPC ROM by pin straps. This function does not + * handle the theoretically possible PCI ROM, FWH, or SPI ROM configurations. + * + * The SB800 power-on default is to map 512K ROM space. + * + */ +static void sb800_enable_rom(void) +{ + u8 reg8; + device_t dev; + + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, + PCI_DEVICE_ID_ATI_SB800_LPC), 0); + + /* Decode variable LPC ROM address ranges 1 and 2. */ + reg8 = pci_read_config8(dev, 0x48); + reg8 |= (1 << 3) | (1 << 4); + pci_write_config8(dev, 0x48, reg8); + + /* LPC ROM address range 1: */ + /* Enable LPC ROM range mirroring start at 0x000e(0000). */ + pci_write_config16(dev, 0x68, 0x000e); + /* Enable LPC ROM range mirroring end at 0x000f(ffff). */ + pci_write_config16(dev, 0x6a, 0x000f); + + /* LPC ROM address range 2: */ + /* + * Enable LPC ROM range start at: + * 0xfff8(0000): 512KB + * 0xfff0(0000): 1MB + * 0xffe0(0000): 2MB + * 0xffc0(0000): 4MB + */ + pci_write_config16(dev, 0x6c, 0xffc0); /* 4 MB */ + /* Enable LPC ROM range end at 0xffff(ffff). */ + pci_write_config16(dev, 0x6e, 0xffff); +} + +static void bootblock_southbridge_init(void) +{ + sb800_enable_rom(); +} diff --git a/src/southbridge/amd/sb800/chip.h b/src/southbridge/amd/sb800/chip.h new file mode 100644 index 0000000000..41f26d16c0 --- /dev/null +++ b/src/southbridge/amd/sb800/chip.h @@ -0,0 +1,34 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SB800_CHIP_H +#define SB800_CHIP_H + +struct southbridge_amd_sb800_config +{ + u32 ide0_enable : 1; + u32 sata0_enable : 1; + u32 boot_switch_sata_ide : 1; + u32 hda_viddid; + u8 gpp_configuration; +}; +struct chip_operations; +extern struct chip_operations southbridge_amd_sb800_ops; + +#endif /* SB800_CHIP_H */ diff --git a/src/southbridge/amd/sb800/early_setup.c b/src/southbridge/amd/sb800/early_setup.c new file mode 100644 index 0000000000..61a0e66588 --- /dev/null +++ b/src/southbridge/amd/sb800/early_setup.c @@ -0,0 +1,654 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _SB800_EARLY_SETUP_C_ +#define _SB800_EARLY_SETUP_C_ + +#include <reset.h> +#include <arch/cpu.h> +#include <cbmem.h> +#include "sb800.h" +#include "smbus.c" + +#define SMBUS_IO_BASE 0x6000 /* Is it a temporary SMBus I/O base address? */ + /*SIZE 0x40 */ + +static void pmio_write(u8 reg, u8 value) +{ + outb(reg, PM_INDEX); + outb(value, PM_INDEX + 1); +} + +static u8 pmio_read(u8 reg) +{ + outb(reg, PM_INDEX); + return inb(PM_INDEX + 1); +} + +static void sb800_acpi_init(void) { + pmio_write(0x60, ACPI_PM_EVT_BLK & 0xFF); + pmio_write(0x61, ACPI_PM_EVT_BLK >> 8); + pmio_write(0x62, ACPI_PM1_CNT_BLK & 0xFF); + pmio_write(0x63, ACPI_PM1_CNT_BLK >> 8); + pmio_write(0x64, ACPI_PM_TMR_BLK & 0xFF); + pmio_write(0x65, ACPI_PM_TMR_BLK >> 8); + pmio_write(0x68, ACPI_GPE0_BLK & 0xFF); + pmio_write(0x69, ACPI_GPE0_BLK >> 8); + + /* CpuControl is in \_PR.CPU0, 6 bytes */ + pmio_write(0x66, ACPI_CPU_CONTROL & 0xFF); + pmio_write(0x67, ACPI_CPU_CONTROL >> 8); + + pmio_write(0x6A, 0); /* AcpiSmiCmdLo */ + pmio_write(0x6B, 0); /* AcpiSmiCmdHi */ + + pmio_write(0x6C, ACPI_PMA_CNT_BLK & 0xFF); + pmio_write(0x6D, ACPI_PMA_CNT_BLK >> 8); + + pm_iowrite(0x74, 1<<0 | 1<<1 | 1<<4 | 1<<2); /* AcpiDecodeEnable, When set, SB uses + * the contents of the PM registers at + * index 60-6B to decode ACPI I/O address. + * AcpiSmiEn & SmiCmdEn*/ +} + +/* RPR 2.28 Get SB ASIC Revision.*/ +static u8 get_sb800_revision(void) +{ + device_t dev; + u8 rev_id; + u8 rev = 0; + + /* if (rev != 0) return rev; */ + + dev = PCI_DEV(0, 0x14, 0);//pci_locate_device(PCI_ID(0x1002, 0x4385), 0); + + if (dev == PCI_DEV_INVALID) { + die("SMBUS controller not found\n"); + /* NOT REACHED */ + } + rev_id = pci_read_config8(dev, 0x08); + + if (rev_id == 0x40) { + rev = REV_SB800_A11; + } else if (rev_id == 0x41) { + rev = REV_SB800_A12; + } else { + die("It is not SB800 or SB810\r\n"); + } + + return rev; +} + +#if 0 +static void sb800_clk_output_48Mhz(void) +{ + /* AcpiMMioDecodeEn */ + u8 reg8; + reg8 = pmio_read(0x24); + reg8 |= 1; + reg8 &= ~(1 << 1); + pmio_write(0x24, reg8); + + *(volatile u32 *)(0xFED80000+0xE00+0x40) &= ~((1 << 0) | (1 << 2)); /* 48Mhz */ + *(volatile u32 *)(0xFED80000+0xE00+0x40) |= 1 << 1; /* 48Mhz */ +} +#endif +/*************************************** +* Legacy devices are mapped to LPC space. +* Serial port 0 +* KBC Port +* ACPI Micro-controller port +* LPC ROM size +* This function does not change port 0x80 decoding. +* Console output through any port besides 0x3f8 is unsupported. +* If you use FWH ROMs, you have to setup IDSEL. +***************************************/ +static void sb800_lpc_init(void) +{ + u8 reg8; + device_t dev; + + //dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); /* SMBUS controller */ + dev = PCI_DEV(0, 0x14, 0); + /* NOTE: Set BootTimerDisable, otherwise it would keep rebooting!! + * This bit has no meaning if debug strap is not enabled. So if the + * board keeps rebooting and the code fails to reach here, we could + * disable the debug strap first. */ + reg8 = pmio_read(0x44+3); + reg8 |= 1 << 7; + pmio_write(0x44+3, reg8); + + /* Enable lpc controller */ + reg8 = pmio_read(0xEC); + reg8 |= 1 << 0; + pmio_write(0xEC, reg8); + + dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439d), 0); /* LPC Controller */ + /* Decode port 0x3f8-0x3ff (Serial 0) */ + //#warning Serial port decode on LPC is hardcoded to 0x3f8 + reg8 = pci_read_config8(dev, 0x44); + reg8 |= 1 << 6; + pci_write_config8(dev, 0x44, reg8); + + /* Decode port 0x60 & 0x64 (PS/2 keyboard) and port 0x62 & 0x66 (ACPI)*/ + reg8 = pci_read_config8(dev, 0x47); + reg8 |= (1 << 5) | (1 << 6); + pci_write_config8(dev, 0x47, reg8); + + /* SuperIO, LPC ROM */ + reg8 = pci_read_config8(dev, 0x48); + /* Decode ports 0x2e-0x2f, 0x4e-0x4f (SuperI/O configuration) */ + reg8 |= (1 << 1) | (1 << 0); + /* Decode variable LPC ROM address ranges 1&2 (see register 0x68-0x6b, 0x6c-0x6f) */ + reg8 |= (1 << 3) | (1 << 4); + /* Decode port 0x70-0x73 (RTC) */ + reg8 |= 1 << 6; + pci_write_config8(dev, 0x48, reg8); +} + +/* what is its usage? */ +static u32 get_sbdn(u32 bus) +{ + device_t dev; + + /* Find the device. */ + dev = PCI_DEV(bus, 0x14, 0);//pci_locate_device_on_bus(PCI_ID(0x1002, 0x4385), bus); + return (dev >> 15) & 0x1f; +} + +static u8 dual_core(void) +{ + return (pci_read_config32(PCI_DEV(0, 0x18, 3), 0xE8) & (0x3<<12)) != 0; +} + +/* + * RPR 2.6 C-state and VID/FID change for the K8 platform. + */ +static void enable_fid_change_on_sb(u32 sbbusn, u32 sbdn) +{ + u8 byte; + byte = pmio_read(0x80); + if (dual_core()) + byte |= 1 << 2 | 1 << 1; + byte |= 1 << 3; + byte |= 1 << 4; + byte &= ~(1 << 7); + pmio_write(0x80, byte); + + byte = pmio_read(0x7E); + byte |= 1 << 6; + byte &= ~(1 << 2); + pmio_write(0x7E, byte); + + pmio_write(0x94, 0x01); + + byte = pmio_read(0x89); + byte |= 1 << 4; + pmio_write(0x89, byte); + + byte = pmio_read(0x9b); + byte &= ~(7 << 4); + byte |= 1 << 4; + pmio_write(0x9b, byte); + + pmio_write(0x99, 0x10); + + pmio_write(0x9A, 0x00); + pmio_write(0x96, 0x10); + pmio_write(0x97, 0x00); + + byte = pmio_read(0x81); + byte &= ~(1 << 1); + pmio_write(0x81, byte); +} + +void hard_reset(void) +{ + set_bios_reset(); + + /* full reset */ + outb(0x0a, 0x0cf9); + outb(0x0e, 0x0cf9); +} + +void soft_reset(void) +{ + set_bios_reset(); + /* link reset */ + outb(0x06, 0x0cf9); +} + +#if 0 +static void sb800_pci_port80(void) +{ + u8 byte; + device_t dev; + + /* P2P Bridge */ + dev = PCI_DEV(0, 0x14, 4);//pci_locate_device(PCI_ID(0x1002, 0x4384), 0); + + /* Chip Control: Enable subtractive decoding */ + byte = pci_read_config8(dev, 0x40); + byte |= 1 << 5; + pci_write_config8(dev, 0x40, byte); + + /* Misc Control: Enable subtractive decoding if 0x40 bit 5 is set */ + byte = pci_read_config8(dev, 0x4B); + byte |= 1 << 7; + pci_write_config8(dev, 0x4B, byte); + + /* The same IO Base and IO Limit here is meaningful because we set the + * bridge to be subtractive. During early setup stage, we have to make + * sure that data can go through port 0x80. + */ + /* IO Base: 0xf000 */ + byte = pci_read_config8(dev, 0x1C); + byte |= 0xF << 4; + pci_write_config8(dev, 0x1C, byte); + + /* IO Limit: 0xf000 */ + byte = pci_read_config8(dev, 0x1D); + byte |= 0xF << 4; + pci_write_config8(dev, 0x1D, byte); + + /* PCI Command: Enable IO response */ + byte = pci_read_config8(dev, 0x04); + byte |= 1 << 0; + pci_write_config8(dev, 0x04, byte); + + /* LPC controller */ + dev = PCI_DEV(0, 0x14, 3);;//pci_locate_device(PCI_ID(0x1002, 0x439D), 0); + + byte = pci_read_config8(dev, 0x4A); + byte &= ~(1 << 5); /* disable lpc port 80 */ + pci_write_config8(dev, 0x4A, byte); +} +#endif +#define BIT0 (1 << 0) +#define BIT1 (1 << 1) +#define BIT2 (1 << 2) +#define BIT3 (1 << 3) +#define BIT4 (1 << 4) +#define BIT5 (1 << 5) +#define BIT6 (1 << 6) +#define BIT7 (1 << 7) + +struct pm_entry { + u8 port; + u8 mask; + u8 bit; +}; +struct pm_entry const pm_table[] = +{ + {0x5D, 0x00, BIT0}, + {0xD2, 0xCF, BIT4 + BIT5}, + {0x12, 0x00, BIT0}, + {0x28, 0xFF, BIT0}, + {0x44 + 3, 0x7F, BIT7}, + {0x48, 0xFF, BIT0}, + {0x00, 0xFF, 0x0E}, + {0x00 + 2, 0xFF, 0x40}, + {0x00 + 3, 0xFF, 0x08}, + {0x34, 0xEF, BIT0 + BIT1}, + {0xEC, 0xFD, BIT1}, + {0x5B, 0xF9, BIT1 + BIT2}, + {0x08, 0xFE, BIT2 + BIT4}, + {0x08 + 1, 0xFF, BIT0}, + {0x54, 0x00, BIT4 + BIT7}, + {0x04 + 3, 0xFD, BIT1}, + {0x74, 0xF6, BIT0 + BIT3}, + {0xF0, ~BIT2, 0x00}, + {0xF8, 0x00, 0x6C}, + {0xF8 + 1, 0x00, 0x27}, + {0xF8 + 2, 0x00, 0x00}, + {0xC4, 0xFE, 0x14}, + {0xC0 + 2, 0xBF, 0x40}, + {0xBE, 0xDD, BIT5}, + // HPET workaround + {0x54 + 3, 0xFC, BIT0 + BIT1}, + {0x54 + 2, 0x7F, BIT7}, + {0x54 + 2, 0x7F, 0x00}, + {0xC4, ~(BIT2 + BIT4), BIT2 + BIT4}, + {0xC0, 0, 0xF9}, + {0xC0 + 1, 0x04, 0x03}, + {0xC2, 0x20, 0x58}, + {0xC2 + 1, 0, 0x40}, + {0xC2, ~(BIT4), BIT4}, + {0x74, 0x00, BIT0 + BIT1 + BIT2 + BIT4}, + {0xDE + 1, ~(BIT0 + BIT1), BIT0 + BIT1}, + {0xDE, ~BIT4, BIT4}, + {0xBA, ~BIT3, BIT3}, + {0xBA + 1, ~BIT6, BIT6}, + {0xBC, ~BIT1, BIT1}, + {0xED, ~(BIT0 + BIT1), 0}, + {0xDC, 0x7C, BIT0}, + +// {0xFF, 0xFF, 0xFF}, + +}; + +static void sb800_lpc_port80(void) +{ + u8 byte; + device_t dev; + + /* Enable LPC controller */ + byte = pmio_read(0xEC); + byte |= 1 << 0; + pmio_write(0xEC, byte); + + /* Enable port 80 LPC decode in pci function 3 configuration space. */ + dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0); + byte = pci_read_config8(dev, 0x4a); + byte |= 1 << 5; /* enable port 80 */ + pci_write_config8(dev, 0x4a, byte); +} + +/* sbDevicesPorInitTable */ +static void sb800_devices_por_init(void) +{ + device_t dev; + u8 byte; + + printk(BIOS_INFO, "sb800_devices_por_init()\n"); + /* SMBus Device, BDF:0-20-0 */ + printk(BIOS_INFO, "sb800_devices_por_init(): SMBus Device, BDF:0-20-0\n"); + dev = PCI_DEV(0, 0x14, 0);//pci_locate_device(PCI_ID(0x1002, 0x4385), 0); + + if (dev == PCI_DEV_INVALID) { + die("SMBUS controller not found\n"); + /* NOT REACHED */ + } + printk(BIOS_INFO, "SMBus controller enabled, sb revision is A%x\n", + get_sb800_revision()); + + /* sbPorAtStartOfTblCfg */ + /* rpr 4.1.Set A-Link bridge access address. + * This is an I/O address. The I/O address must be on 16-byte boundry. */ + //pci_write_config32(dev, 0xf0, AB_INDX); + pmio_write(0xE0, AB_INDX & 0xFF); + pmio_write(0xE1, (AB_INDX >> 8) & 0xFF); + pmio_write(0xE2, (AB_INDX >> 16) & 0xFF); + pmio_write(0xE3, (AB_INDX >> 24) & 0xFF); + + /* To enable AB/BIF DMA access, a specific register inside the BIF register space needs to be configured first. */ + /* 4.2:Enables the SB800 to send transactions upstream over A-Link Express interface. */ + axcfg_reg(0x04, 1 << 2, 1 << 2); + //axindxc_reg(0x21, 0xff, 0); + + /* 4.15:Enabling Non-Posted Memory Write for the K8 Platform */ + axindxc_reg(0x10, 1 << 9, 1 << 9); + /* END of sbPorAtStartOfTblCfg */ + + /* sbDevicesPorInitTables */ + /* set smbus iobase */ + //pci_write_config32(dev, 0x90, SMBUS_IO_BASE | 1); + /* The base address of SMBUS is set in a different way with sb700. */ + byte = (SMBUS_IO_BASE & 0xFF) | 1; + pmio_write(0x2c, byte & 0xFF); + pmio_write(0x2d, SMBUS_IO_BASE >> 8); + + /* AcpiMMioDecodeEn */ + byte = pmio_read(0x24); + byte |= 1; + byte &= ~(1 << 1); + pmio_write(0x24, byte); + /* enable smbus controller interface */ + //byte = pci_read_config8(dev, 0xd2); + //byte |= (1 << 0); + //pci_write_config8(dev, 0xd2, byte); + + /* KB2RstEnable */ + //pci_write_config8(dev, 0x40, 0x44); + + /* Enable ISA Address 0-960K decoding */ + //pci_write_config8(dev, 0x48, 0x0f); + + /* Enable ISA Address 0xC0000-0xDFFFF decode */ + //pci_write_config8(dev, 0x49, 0xff); + + /* Enable decode cycles to IO C50, C51, C52 GPM controls. */ + //byte = pci_read_config8(dev, 0x41); + //byte &= 0x80; + //byte |= 0x33; + //pci_write_config8(dev, 0x41, byte); + + /* Legacy DMA Prefetch Enhancement, CIM masked it. */ + /* pci_write_config8(dev, 0x43, 0x1); */ + + /* clear any lingering errors, so the transaction will run */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); + + /* IDE Device, BDF:0-20-1 */ + printk(BIOS_INFO, "sb800_devices_por_init(): IDE Device, BDF:0-20-1\n"); + dev = PCI_DEV(0, 0x14, 1);//pci_locate_device(PCI_ID(0x1002, 0x439C), 0); + /* Disable prefetch */ + byte = pci_read_config8(dev, 0x63); + byte |= 0x1; + pci_write_config8(dev, 0x63, byte); + + /* LPC Device, BDF:0-20-3 */ + printk(BIOS_INFO, "sb800_devices_por_init(): LPC Device, BDF:0-20-3\n"); + dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0); + /* DMA enable */ + pci_write_config8(dev, 0x40, 0x04); + + /* IO Port Decode Enable */ + pci_write_config8(dev, 0x44, 0xFF); + pci_write_config8(dev, 0x45, 0xFF); + pci_write_config8(dev, 0x46, 0xC3); + pci_write_config8(dev, 0x47, 0xFF); + + /* IO/Mem Port Decode Enable, I don't know why CIM disable some ports. + * Disable LPC TimeOut counter, enable SuperIO Configuration Port (2e/2f), + * Alternate SuperIO Configuration Port (4e/4f), Wide Generic IO Port (64/65). + * Enable bits for LPC ROM memory address range 1&2 for 1M ROM setting.*/ + byte = pci_read_config8(dev, 0x48); + byte |= (1 << 1) | (1 << 0); /* enable Super IO config port 2e-2h, 4e-4f */ + byte |= (1 << 3) | (1 << 4); /* enable for LPC ROM address range1&2, Enable 512KB rom access at 0xFFF80000 - 0xFFFFFFFF */ + byte |= 1 << 6; /* enable for RTC I/O range */ + pci_write_config8(dev, 0x48, byte); + pci_write_config8(dev, 0x49, 0xFF); + /* Enable 0x480-0x4bf, 0x4700-0x470B */ + byte = pci_read_config8(dev, 0x4A); + byte |= ((1 << 1) + (1 << 6)); /*0x42, save the configuraion for port 0x80. */ + pci_write_config8(dev, 0x4A, byte); + + /* Set LPC ROM size, it has been done in sb800_lpc_init(). + * enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB; + * enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB + * pci_write_config16(dev, 0x68, 0x000e) + * pci_write_config16(dev, 0x6c, 0xfff0);*/ + + /* Enable Tpm12_en and Tpm_legacy. I don't know what is its usage and copied from CIM. */ + pci_write_config8(dev, 0x7C, 0x05); + + /* P2P Bridge, BDF:0-20-4, the configuration of the registers in this dev are copied from CIM, + */ + printk(BIOS_INFO, "sb800_devices_por_init(): P2P Bridge, BDF:0-20-4\n"); + dev = PCI_DEV(0, 0x14, 4);//pci_locate_device(PCI_ID(0x1002, 0x4384), 0); + + /* Arbiter enable. */ + pci_write_config8(dev, 0x43, 0xff); + + /* Set PCDMA request into hight priority list. */ + /* pci_write_config8(dev, 0x49, 0x1) */ ; + + pci_write_config8(dev, 0x40, 0x26); + + pci_write_config8(dev, 0x0d, 0x40); + pci_write_config8(dev, 0x1b, 0x40); + /* Enable PCIB_DUAL_EN_UP will fix potential problem with PCI cards. */ + pci_write_config8(dev, 0x50, 0x01); + + /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */ + printk(BIOS_INFO, "sb800_devices_por_init(): SATA Device, BDF:0-18-0\n"); + dev = PCI_DEV(0, 0x11, 0);//pci_locate_device(PCI_ID(0x1002, 0x4390), 0); + + /*PHY Global Control*/ + pci_write_config16(dev, 0x86, 0x2C00); +} + +/* sbPmioPorInitTable, Pre-initializing PMIO register space +* The power management (PM) block is resident in the PCI/LPC/ISA bridge. +* The PM regs are accessed via IO mapped regs 0xcd6 and 0xcd7. +* The index address is first programmed into IO reg 0xcd6. +* Read or write values are accessed through IO reg 0xcd7. +*/ +#if 0 +static void sb800_pmio_por_init(void) +{ + u8 byte, i; + + printk(BIOS_INFO, "sb800_pmio_por_init()\n"); + + byte = pmio_read(0xD2); + byte |= 3 << 4; + pmio_write(0xD2, byte); + + byte = pmio_read(0x5D); + byte &= 3; + byte |= 1; + pmio_write(0x5D, byte); + + /* Watch Dog Timer Control + * Set watchdog time base to 0xfec000f0 to avoid SCSI card boot failure. + * But I don't find WDT is enabled in SMBUS 0x41 bit3 in CIM. + */ + pmio_write(0x6c, 0xf0); + pmio_write(0x6d, 0x00); + pmio_write(0x6e, 0xc0); + pmio_write(0x6f, 0xfe); + + /* rpr2.15: Enabling Spread Spectrum */ + byte = pmio_read(0x42); + byte |= 1 << 7; + pmio_write(0x42, byte); + /* TODO: Check if it is necessary. IDE reset */ + byte = pmio_read(0xB2); + byte |= 1 << 0; + pmio_write(0xB2, byte); + + for (i=0; i<sizeof(pm_table)/sizeof(struct pm_entry); i++) { + byte = pmio_read(pm_table[i].port); + byte &= pm_table[i].mask; + byte |= pm_table[i].bit; + pmio_write(pm_table[i].port, byte); + } + pmio_write(0x00, 0x0E); + pmio_write(0x01, 0x00); + pmio_write(0x02, 0x4F); + pmio_write(0x03, 0x4A); +} +#endif + +/* +* Add any south bridge setting. +*/ +static void sb800_pci_cfg(void) +{ + device_t dev; + u8 byte; + + /* SMBus Device, BDF:0-20-0 */ + dev = PCI_DEV(0, 0x14, 0);//pci_locate_device(PCI_ID(0x1002, 0x4385), 0); + /* Enable watchdog decode timer */ + byte = pci_read_config8(dev, 0x41); + byte |= (1 << 3); + pci_write_config8(dev, 0x41, byte); + + /* Set to 1 to reset USB on the software (such as IO-64 or IO-CF9 cycles) + * generated PCIRST#. */ + byte = pmio_read(0x65); + byte |= (1 << 4); + pmio_write(0x65, byte); + + /* IDE Device, BDF:0-20-1 */ + dev = PCI_DEV(0, 0x14, 1);//pci_locate_device(PCI_ID(0x1002, 0x439C), 0); + /* Enable IDE Explicit prefetch, 0x63[0] clear */ + byte = pci_read_config8(dev, 0x63); + byte &= 0xfe; + pci_write_config8(dev, 0x63, byte); + + /* LPC Device, BDF:0-20-3 */ + /* The code below is ported from old chipset. It is not + * metioned in RPR. But I keep them. The registers and the + * comments are compatible. */ + dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0); + /* Enabling LPC DMA function. */ + byte = pci_read_config8(dev, 0x40); + byte |= (1 << 2); + pci_write_config8(dev, 0x40, byte); + /* Disabling LPC TimeOut. 0x48[7] clear. */ + byte = pci_read_config8(dev, 0x48); + byte &= 0x7f; + pci_write_config8(dev, 0x48, byte); + /* Disabling LPC MSI Capability, 0x78[1] clear. */ + byte = pci_read_config8(dev, 0x78); + byte &= 0xfd; + pci_write_config8(dev, 0x78, byte); + + /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */ + dev = PCI_DEV(0, 0x11, 0);//pci_locate_device(PCI_ID(0x1002, 0x4390), 0); + /* rpr7.12 SATA MSI and D3 Power State Capability. */ + byte = pci_read_config8(dev, 0x40); + byte |= 1 << 0; + pci_write_config8(dev, 0x40, byte); + if (get_sb800_revision() <= 0x12) + pci_write_config8(dev, 0x34, 0x70); /* set 0x61 to 0x70 if S1 is not supported. */ + else + pci_write_config8(dev, 0x34, 0x50); /* set 0x61 to 0x50 if S1 is not supported. */ + byte &= ~(1 << 0); + pci_write_config8(dev, 0x40, byte); +} + +/* +*/ +static void sb800_por_init(void) +{ + /* sbDevicesPorInitTable + sbK8PorInitTable */ + sb800_devices_por_init(); + + /* sbPmioPorInitTable + sbK8PmioPorInitTable */ + //sb800_pmio_por_init(); +} + +/* +* It should be called during early POST after memory detection and BIOS shadowing but before PCI bus enumeration. +*/ +static void sb800_before_pci_init(void) +{ + sb800_pci_cfg(); +} + +/* +* This function should be called after enable_sb800_smbus(). +*/ +static void sb800_early_setup(void) +{ + printk(BIOS_INFO, "sb800_early_setup()\n"); + sb800_por_init(); + sb800_acpi_init(); +} + +static int smbus_read_byte(u32 device, u32 address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} +#endif diff --git a/src/southbridge/amd/sb800/enable_usbdebug.c b/src/southbridge/amd/sb800/enable_usbdebug.c new file mode 100644 index 0000000000..d58437a68e --- /dev/null +++ b/src/southbridge/amd/sb800/enable_usbdebug.c @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <stdint.h> +#include <arch/io.h> +#include <arch/romcc_io.h> +#include <usbdebug.h> +#include <device/pci_def.h> +#include "sb800.h" + +#ifndef SB800_DEVN_BASE +#define SB800_DEVN_BASE 0 +#endif + +#define EHCI_EOR (CONFIG_EHCI_BAR + 0x20) +#define DEBUGPORT_MISC_CONTROL (EHCI_EOR + 0x80) + +void set_debug_port(unsigned int port) +{ + u32 reg32; + + /* Write the port number to DEBUGPORT_MISC_CONTROL[31:28]. */ + reg32 = read32(DEBUGPORT_MISC_CONTROL); + reg32 &= ~(0xf << 28); + reg32 |= (port << 28); + reg32 |= (1 << 27); /* Enable Debug Port port number remapping. */ + write32(DEBUGPORT_MISC_CONTROL, reg32); +} + + +void sb800_enable_usbdebug(unsigned int port) +{ + pci_write_config32(PCI_DEV(0, SB800_DEVN_BASE + 0x13, 5), + EHCI_BAR_INDEX, CONFIG_EHCI_BAR); + pci_write_config8(PCI_DEV(0, SB800_DEVN_BASE + 0x13, 5), 0x04, 0x2); /* mem space enabe */ + set_debug_port(port); +} diff --git a/src/southbridge/amd/sb800/fadt.c b/src/southbridge/amd/sb800/fadt.c new file mode 100644 index 0000000000..6eb5c0a737 --- /dev/null +++ b/src/southbridge/amd/sb800/fadt.c @@ -0,0 +1,160 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ACPI - create the Fixed ACPI Description Tables (FADT) + */ + +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <device/device.h> +#include "sb800.h" + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", SB800_ACPI_IO_BASE); + + /* Prepare the header */ + memset((void *)fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = 244; + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, "COREBOOT", 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = (u32) facs; + fadt->dsdt = (u32) dsdt; + /* 3=Workstation,4=Enterprise Server, 7=Performance Server */ + fadt->preferred_pm_profile = 0x03; + fadt->sci_int = 9; + /* disable system management mode by setting to 0: */ + fadt->smi_cmd = 0; + fadt->acpi_enable = 0xf0; + fadt->acpi_disable = 0xf1; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0xe2; + fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; + fadt->pm1b_evt_blk = 0x0000; + fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; + fadt->pm1b_cnt_blk = 0x0000; + fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; + fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; + fadt->gpe0_blk = ACPI_GPE0_BLK; + fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 8; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + + fadt->cst_cnt = 0xe3; + fadt->p_lvl2_lat = 101; + fadt->p_lvl3_lat = 1001; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0; /* 0x7d these have to be */ + fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ + fadt->century = 0; /* 0x7f to make rtc alrm work */ + fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ + fadt->flags = 0x0001c1a5;/* 0x25; */ + + fadt->res2 = 0; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (u32) facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32) dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 4; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 2; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 32; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); +} diff --git a/src/southbridge/amd/sb800/hda.c b/src/southbridge/amd/sb800/hda.c new file mode 100644 index 0000000000..07ae70b49f --- /dev/null +++ b/src/southbridge/amd/sb800/hda.c @@ -0,0 +1,213 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <arch/io.h> +#include <delay.h> +#include "sb800.h" + +#define HDA_ICII_REG 0x68 +#define HDA_ICII_BUSY (1 << 0) +#define HDA_ICII_VALID (1 << 1) + +static int set_bits(u32 port, u32 mask, u32 val) +{ + u32 dword; + int count; + + /* Write (val & ~mask) to port */ + val &= mask; + dword = read32(port); + dword &= ~mask; + dword |= val; + write32(port, dword); + + /* Wait for readback of register to + * match what was just written to it + */ + count = 50; + do { + /* Wait 1ms based on BKDG wait time */ + mdelay(1); + dword = read32(port); + dword &= mask; + } while ((dword != val) && --count); + + /* Timeout occured */ + if (!count) + return -1; + return 0; +} + +static u32 codec_detect(u32 base) +{ + u32 dword; + + /* Before Codec detection, we need to set the GPIO167-170 as + * AZ_SDINx. */ + /* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */ + if (set_bits(base + 0x08, 1, 0) == -1) + goto no_codec; + + /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ + if (set_bits(base + 0x08, 1, 1) == -1) + goto no_codec; + + /* Delay for 1 ms since the BKDG does */ + mdelay(1); + + /* Read in Codec location (BAR + 0xe)[3..0]*/ + dword = read32(base + 0xe); + dword &= 0x0F; + if (!dword) + goto no_codec; + + return dword; + +no_codec: + /* Codec Not found */ + /* Put HDA back in reset (BAR + 0x8) [0] */ + set_bits(base + 0x08, 1, 0); + printk(BIOS_DEBUG, "No codec!\n"); + return 0; +} + +/** + * Wait 50usec for for the codec to indicate it is ready + * no response would imply that the codec is non-operative + */ +static int wait_for_ready(u32 base) +{ + /* Use a 50 usec timeout - the Linux kernel uses the + * same duration */ + + int timeout = 50; + + while(timeout--) { + u32 dword=read32(base + HDA_ICII_REG); + if (!(dword & HDA_ICII_BUSY)) + return 0; + udelay(1); + } + + return -1; +} + +/** + * Wait 50usec for for the codec to indicate that it accepted + * the previous command. No response would imply that the code + * is non-operative + */ +static int wait_for_valid(u32 base) +{ + /* Use a 50 usec timeout - the Linux kernel uses the + * same duration */ + + int timeout = 50; + while(timeout--) { + u32 dword = read32(base + HDA_ICII_REG); + if ((dword & (HDA_ICII_VALID | HDA_ICII_BUSY)) == + HDA_ICII_VALID) + return 0; + udelay(1); + } + + return 1; +} + +static void codec_init(u32 base, int addr) +{ + u32 dword; + + /* 1 */ + if (wait_for_ready(base) == -1) + return; + + dword = (addr << 28) | 0x000f0000; + write32(base + 0x60, dword); + + if (wait_for_valid(base) == -1) + return; + + dword = read32(base + 0x64); + + /* 2 */ + printk(BIOS_DEBUG, "%x(th) codec viddid: %08x\n", addr, dword); +} + +static void codecs_init(u32 base, u32 codec_mask) +{ + int i; + for (i = 3; i >= 0; i--) { + if (codec_mask & (1 << i)) + codec_init(base, i); + } +} + +static void hda_init(struct device *dev) +{ + u32 dword; + u32 base; + struct resource *res; + u32 codec_mask; + + /* Program the 2C to 0x437b1002 */ + dword = 0x43831002; + pci_write_config32(dev, 0x2c, dword); + + /* Read in BAR */ + /* Is this right? HDA allows for a 64-bit BAR + * but this is only setup for a 32-bit one + */ + res = find_resource(dev, 0x10); + if (!res) + return; + + base = (u32)res->base; + printk(BIOS_DEBUG, "base = 0x%x\n", base); + codec_mask = codec_detect(base); + + if (codec_mask) { + printk(BIOS_DEBUG, "codec_mask = %02x\n", codec_mask); + codecs_init(base, codec_mask); + } +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static struct device_operations hda_audio_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = hda_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static const struct pci_driver hdaaudio_driver __pci_driver = { + .ops = &hda_audio_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_HDA, +}; diff --git a/src/southbridge/amd/sb800/ide.c b/src/southbridge/amd/sb800/ide.c new file mode 100644 index 0000000000..eb287f2cb2 --- /dev/null +++ b/src/southbridge/amd/sb800/ide.c @@ -0,0 +1,83 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "sb800.h" + +static void ide_init(struct device *dev) +{ + struct southbridge_amd_sb800_config *conf; + /* Enable ide devices so the linux ide driver will work */ + u32 dword; + u8 byte; + + conf = dev->chip_info; + + /* RPR9.1 disable MSI */ + /* TODO: For A14, it should set as 1. I doubt it. */ + dword = pci_read_config32(dev, 0x70); + dword &= ~(1 << 16); + pci_write_config32(dev, 0x70, dword); + + /* Ultra DMA mode */ + /* enable UDMA */ + byte = pci_read_config8(dev, 0x54); + byte |= 1 << 0; + pci_write_config8(dev, 0x54, byte); + + /* Enable I/O Access&& Bus Master */ + dword = pci_read_config16(dev, 0x4); + dword |= 1 << 2; + pci_write_config16(dev, 0x4, dword); + + /* set ide as primary, if you want to boot from IDE, you'd better set it + * in mainboard/Config.lb */ + if (conf->boot_switch_sata_ide == 1) { + byte = pci_read_config8(dev, 0xAD); + byte |= 1 << 4; + pci_write_config8(dev, 0xAD, byte); + } + +#if CONFIG_PCI_ROM_RUN == 1 + pci_dev_init(dev); +#endif +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static struct device_operations ide_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = ide_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static const struct pci_driver ide_driver __pci_driver = { + .ops = &ide_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_IDE, +}; diff --git a/src/southbridge/amd/sb800/lpc.c b/src/southbridge/amd/sb800/lpc.c new file mode 100644 index 0000000000..50ff4d4cec --- /dev/null +++ b/src/southbridge/amd/sb800/lpc.c @@ -0,0 +1,243 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pnp.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <pc80/mc146818rtc.h> +#include <pc80/isa-dma.h> +#include <bitops.h> +#include <arch/io.h> +#include "sb800.h" + +static void lpc_init(device_t dev) +{ + u8 byte; + u32 dword; + device_t sm_dev; + + /* Enable the LPC Controller */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + dword = pci_read_config32(sm_dev, 0x64); + dword |= 1 << 20; + pci_write_config32(sm_dev, 0x64, dword); + + /* Initialize isa dma */ + isa_dma_init(); + + /* Enable DMA transaction on the LPC bus */ + byte = pci_read_config8(dev, 0x40); + byte |= (1 << 2); + pci_write_config8(dev, 0x40, byte); + + /* Disable the timeout mechanism on LPC */ + byte = pci_read_config8(dev, 0x48); + byte &= ~(1 << 7); + pci_write_config8(dev, 0x48, byte); + + /* Disable LPC MSI Capability */ + byte = pci_read_config8(dev, 0x78); + byte &= ~(1 << 1); + byte &= ~(1 << 0); /* Keep the old way. i.e., when bus master/DMA cycle is going + on on LPC, it holds PCI grant, so no LPC slave cycle can + interrupt and visit LPC. */ + pci_write_config8(dev, 0x78, byte); + + /* bit0: Enable prefetch a cacheline (64 bytes) when Host reads code from SPI rom */ + /* bit3: Fix SPI_CS# timing issue when running at 66M. TODO:A12. */ + byte = pci_read_config8(dev, 0xBB); + byte |= 1 << 0 | 1 << 3; + pci_write_config8(dev, 0xBB, byte); +} + +static void sb800_lpc_read_resources(device_t dev) +{ + struct resource *res; + + /* Get the normal pci resources of this device */ + pci_dev_read_resources(dev); /* We got one for APIC, or one more for TRAP */ + + pci_get_resource(dev, 0xA0); /* SPI ROM base address */ + + /* Add an extra subtractive resource for both memory and I/O. */ + res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); + res->base = 0; + res->size = 0x1000; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); + res->base = 0xff800000; + res->size = 0x00800000; /* 8 MB for flash */ + res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + //res = new_resource(dev, 3); /* IOAPIC */ + //res->base = 0xfec00000; + //res->size = 0x00001000; + //res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + compact_resources(dev); +} + +static void sb800_lpc_set_resources(struct device *dev) +{ + struct resource *res; + + pci_dev_set_resources(dev); + + /* Specical case. SPI Base Address. The SpiRomEnable should be set. */ + res = find_resource(dev, 0xA0); + pci_write_config32(dev, 0xA0, res->base | 1 << 1); + +} + +/** + * @brief Enable resources for children devices + * + * @param dev the device whos children's resources are to be enabled + * + */ +static void sb800_lpc_enable_childrens_resources(device_t dev) +{ + struct bus *link; + u32 reg, reg_x; + int var_num = 0; + u16 reg_var[3]; + + reg = pci_read_config32(dev, 0x44); + reg_x = pci_read_config32(dev, 0x48); + + for (link = dev->link_list; link; link = link->next) { + device_t child; + for (child = link->children; child; + child = child->sibling) { + if (child->enabled + && (child->path.type == DEVICE_PATH_PNP)) { + struct resource *res; + for (res = child->resource_list; res; res = res->next) { + u32 base, end; /* don't need long long */ + if (!(res->flags & IORESOURCE_IO)) + continue; + base = res->base; + end = resource_end(res); + printk(BIOS_DEBUG, "sb800 lpc decode:%s, base=0x%08x, end=0x%08x\n", + dev_path(child), base, end); + switch (base) { + case 0x60: /* KB */ + case 0x64: /* MS */ + reg |= (1 << 29); + break; + case 0x3f8: /* COM1 */ + reg |= (1 << 6); + break; + case 0x2f8: /* COM2 */ + reg |= (1 << 7); + break; + case 0x378: /* Parallal 1 */ + reg |= (1 << 0); + break; + case 0x3f0: /* FD0 */ + reg |= (1 << 26); + break; + case 0x220: /* Aduio 0 */ + reg |= (1 << 8); + break; + case 0x300: /* Midi 0 */ + reg |= (1 << 18); + break; + case 0x400: + reg_x |= (1 << 16); + break; + case 0x480: + reg_x |= (1 << 17); + break; + case 0x500: + reg_x |= (1 << 18); + break; + case 0x580: + reg_x |= (1 << 19); + break; + case 0x4700: + reg_x |= (1 << 22); + break; + case 0xfd60: + reg_x |= (1 << 23); + break; + default: + if (var_num >= 3) + continue; /* only 3 var ; compact them ? */ + switch (var_num) { + case 0: + reg_x |= (1 << 2); + break; + case 1: + reg_x |= (1 << 24); + break; + case 2: + reg_x |= (1 << 25); + break; + } + reg_var[var_num++] = + base & 0xffff; + } + } + } + } + } + pci_write_config32(dev, 0x44, reg); + pci_write_config32(dev, 0x48, reg_x); + /* Set WideIO for as many IOs found (fall through is on purpose) */ + switch (var_num) { + case 2: + pci_write_config16(dev, 0x90, reg_var[2]); + case 1: + pci_write_config16(dev, 0x66, reg_var[1]); + case 0: + pci_write_config16(dev, 0x64, reg_var[0]); + break; + } +} + +static void sb800_lpc_enable_resources(device_t dev) +{ + pci_dev_enable_resources(dev); + sb800_lpc_enable_childrens_resources(dev); +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static struct device_operations lpc_ops = { + .read_resources = sb800_lpc_read_resources, + .set_resources = sb800_lpc_set_resources, + .enable_resources = sb800_lpc_enable_resources, + .init = lpc_init, + .scan_bus = scan_static_bus, + .ops_pci = &lops_pci, +}; +static const struct pci_driver lpc_driver __pci_driver = { + .ops = &lpc_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_LPC, +}; diff --git a/src/southbridge/amd/sb800/pci.c b/src/southbridge/amd/sb800/pci.c new file mode 100644 index 0000000000..465f9de123 --- /dev/null +++ b/src/southbridge/amd/sb800/pci.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "sb800.h" + +static void pci_init(struct device *dev) +{ + u32 dword; + u8 byte; + + /* RPR 6.1 Enables the PCI-bridge subtractive decode */ + /* This setting is strongly recommended since it supports some legacy PCI add-on cards,such as BIOS debug cards */ + byte = pci_read_config8(dev, 0x4B); + byte |= 1 << 7; + pci_write_config8(dev, 0x4B, byte); + byte = pci_read_config8(dev, 0x40); + byte |= 1 << 5; + pci_write_config8(dev, 0x40, byte); + + /* RPR6.2 PCI-bridge upstream dual address window */ + /* this setting is applicable if the system memory is more than 4GB,and the PCI device can support dual address access */ + byte = pci_read_config8(dev, 0x50); + byte |= 1 << 0; + pci_write_config8(dev, 0x50, byte); + + /* RPR 6.3 Enable One-Prefetch-Channel Mode */ + dword = pci_read_config32(dev, 0x64); + dword |= 1 << 20; + pci_write_config32(dev, 0x64, dword); + + /* rpr6.4 Adjusting CLKRUN# */ + dword = pci_read_config32(dev, 0x64); + dword |= (1 << 15); + pci_write_config32(dev, 0x64, dword); +} + +static struct pci_operations lops_pci = { + .set_subsystem = 0, +}; + +static struct device_operations pci_ops = { + .read_resources = pci_bus_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_bus_enable_resources, + .init = pci_init, + .scan_bus = pci_scan_bridge, + .reset_bus = pci_bus_reset, + .ops_pci = &lops_pci, +}; + +static const struct pci_driver pci_driver __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_PCI, +}; diff --git a/src/southbridge/amd/sb800/pcie.c b/src/southbridge/amd/sb800/pcie.c new file mode 100644 index 0000000000..569c0f3378 --- /dev/null +++ b/src/southbridge/amd/sb800/pcie.c @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "sb800.h" + +static void pcie_init(struct device *dev) +{ + /* Enable pci error detecting */ + u32 dword; + + printk(BIOS_INFO, "pcie_init in rs780_ht.c\n"); + + /* System error enable */ + dword = pci_read_config32(dev, 0x04); + dword |= (1 << 8); /* System error enable */ + dword |= (1 << 30); /* Clear possible errors */ + pci_write_config32(dev, 0x04, dword); +} + +static struct pci_operations lops_pci = { + .set_subsystem = 0, +}; + +static struct device_operations pci_ops = { + .read_resources = pci_bus_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_bus_enable_resources, + .init = pcie_init, + .scan_bus = pci_scan_bridge, + .reset_bus = pci_bus_reset, + .ops_pci = &lops_pci, +}; + +static const struct pci_driver pciea_driver __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_PCIEA, +}; + +static const struct pci_driver pcieb_driver __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_PCIEB, +}; +static const struct pci_driver pciec_driver __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_PCIEC, +}; +static const struct pci_driver pcied_driver __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_PCIED, +}; diff --git a/src/southbridge/amd/sb800/reset.c b/src/southbridge/amd/sb800/reset.c new file mode 100644 index 0000000000..32ee66b4b5 --- /dev/null +++ b/src/southbridge/amd/sb800/reset.c @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <reset.h> +#include <arch/io.h> +#include <arch/romcc_io.h> + +#include "../../../northbridge/amd/amdk8/reset_test.c" + +void hard_reset(void) +{ + set_bios_reset(); + /* Try rebooting through port 0xcf9 */ + /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */ + outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9); + outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9); +} diff --git a/src/southbridge/amd/sb800/sata.c b/src/southbridge/amd/sb800/sata.c new file mode 100644 index 0000000000..db4d20f54c --- /dev/null +++ b/src/southbridge/amd/sb800/sata.c @@ -0,0 +1,258 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <delay.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <arch/io.h> +#include "sb800.h" + +static int sata_drive_detect(int portnum, u16 iobar) +{ + u8 byte, byte2; + int i = 0; + outb(0xA0 + 0x10 * (portnum % 2), iobar + 0x6); + while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7), + (byte != (0xA0 + 0x10 * (portnum % 2))) || + ((byte2 & 0x88) != 0)) { + printk(BIOS_SPEW, "0x6=%x, 0x7=%x\n", byte, byte2); + if (byte != (0xA0 + 0x10 * (portnum % 2))) { + /* This will happen at the first iteration of this loop + * if the first SATA port is unpopulated and the + * second SATA port is poulated. + */ + printk(BIOS_DEBUG, "drive no longer selected after %i ms, " + "retrying init\n", i * 10); + return 1; + } else + printk(BIOS_SPEW, "drive detection not yet completed, " + "waiting...\n"); + mdelay(10); + i++; + } + printk(BIOS_SPEW, "drive detection done after %i ms\n", i * 10); + return 0; +} + +static void sata_init(struct device *dev) +{ + u8 byte; + u16 word; + u32 dword; + u8 rev_id; + u32 sata_bar5; + u16 sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4; + int i, j; + + struct southbridge_ati_sb800_config *conf; + conf = dev->chip_info; + + device_t sm_dev; + /* SATA SMBus Disable */ + /* sm_dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + /* get rev_id */ + rev_id = pci_read_config8(sm_dev, 0x08) - 0x2F; + + /* get base addresss */ + sata_bar5 = pci_read_config32(dev, 0x24) & ~0x3FF; + sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7; + sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3; + sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7; + sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x3; + sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf; + + printk(BIOS_SPEW, "sata_bar0=%x\n", sata_bar0); /* 3030 */ + printk(BIOS_SPEW, "sata_bar1=%x\n", sata_bar1); /* 3070 */ + printk(BIOS_SPEW, "sata_bar2=%x\n", sata_bar2); /* 3040 */ + printk(BIOS_SPEW, "sata_bar3=%x\n", sata_bar3); /* 3080 */ + printk(BIOS_SPEW, "sata_bar4=%x\n", sata_bar4); /* 3000 */ + printk(BIOS_SPEW, "sata_bar5=%x\n", sata_bar5); /* e0309000 */ + + /* SERR-Enable */ + word = pci_read_config16(dev, 0x04); + word |= (1 << 8); + pci_write_config16(dev, 0x04, word); + + /* Set SATA Operation Mode, Set to IDE mode */ + byte = pci_read_config8(dev, 0x40); + byte |= (1 << 0); + //byte |= (1 << 4); + pci_write_config8(dev, 0x40, byte); + + dword = 0x01018f00; + pci_write_config32(dev, 0x8, dword); + + /* Program the 2C to 0x43801002 */ + dword = 0x43801002; + pci_write_config32(dev, 0x2c, dword); + + pci_write_config8(dev, 0x34, 0x70); /* 8.11 SATA MSI and D3 Power State Capability */ + + dword = read32(sata_bar5 + 0xFC); + dword &= ~(1 << 11); /* rpr 8.8. Disabling Aggressive Link Power Management */ + dword &= ~(1 << 12); /* rpr 8.9.1 Disabling Port Multiplier support. */ + dword &= ~(1 << 10); /* rpr 8.9.2 disabling FIS-based Switching support */ + dword &= ~(1 << 19); /* rpr 8.10. Disabling CCC (Command Completion Coalescing) Support */ + write32((sata_bar5 + 0xFC), dword); + + dword = read32(sata_bar5 + 0xF8); + dword &= ~(0x3F << 22); /* rpr 8.9.2 disabling FIS-based Switching support */ + write32(sata_bar5 + 0xF8, dword); + + byte = pci_read_config8(dev, 0x40); + byte &= ~(1 << 0); + pci_write_config8(dev, 0x40, byte); + + /* rpr 8.3 */ + printk(BIOS_SPEW, "rev_id=%x\n", rev_id); + dword = pci_read_config32(dev, 0x84); + if (rev_id == 0x11) /* A11 */ + dword |= 1 << 22; + pci_write_config32(dev, 0x84, dword); + + /* rpr8.12 Program the watchdog counter to 0x20 */ + byte = pci_read_config8(dev, 0x44); + byte |= 1 << 0; + pci_write_config8(dev, 0x44, byte); + + pci_write_config8(dev, 0x46, 0x20); + + /* RPR8.4 */ + /* Port 0 */ + for (i = 0; i < 6; i++) { + pci_write_config16(dev, 0x84, 0x3006 | i << 9); + pci_write_config32(dev, 0x94, 0x0056A700); + pci_write_config16(dev, 0x84, 0x2006 | i << 9); + pci_write_config32(dev, 0x94, 0x00061400); + pci_write_config16(dev, 0x84, 0x1006 | i << 9); + pci_write_config32(dev, 0x94, 0x00061302); + } + + /* Enable the I/O, MM, BusMaster access for SATA */ + byte = pci_read_config8(dev, 0x4); + byte |= 7 << 0; + pci_write_config8(dev, 0x4, byte); + + /* RPR7.7 SATA drive detection. */ + /* Use BAR5+0x128,BAR0 for Primary Slave */ + /* Use BAR5+0x1A8,BAR0 for Primary Slave */ + /* Use BAR5+0x228,BAR2 for Secondary Master */ + /* Use BAR5+0x2A8,BAR2 for Secondary Slave */ + /* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary master emulation */ + /* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */ + + /* TODO: port 4,5, which are PATA emulations. What are PATA_BARs? */ + + for (i = 0; i < 4; i++) { + byte = read8(sata_bar5 + 0x128 + 0x80 * i); + printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); + byte &= 0xF; + if( byte == 0x1 ) { + /* If the drive status is 0x1 then we see it but we aren't talking to it. */ + /* Try to do something about it. */ + printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n"); + + /* Read in Port-N Serial ATA Control Register */ + byte = read8(sata_bar5 + 0x12C + 0x80 * i); + + /* Set Reset Bit and 1.5g bit */ + byte |= 0x11; + write8((sata_bar5 + 0x12C + 0x80 * i), byte); + + /* Wait 1ms */ + mdelay(1); + + /* Clear Reset Bit */ + byte &= ~0x01; + write8((sata_bar5 + 0x12C + 0x80 * i), byte); + + /* Wait 1ms */ + mdelay(1); + + /* Reread status */ + byte = read8(sata_bar5 + 0x128 + 0x80 * i); + printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); + byte &= 0xF; + } + + if (byte == 0x3) { + for (j = 0; j < 10; j++) { + if (!sata_drive_detect(i, ((i / 2) == 0) ? sata_bar0 : sata_bar2)) + break; + } + printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n", + (i / 2) ? "Secondary" : "Primary", + (i % 2 ) ? "Slave" : "Master", + (j == 10) ? "not " : "", + (j == 10) ? j : j + 1); + } else { + printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n", + (i / 2) ? "Secondary" : "Primary", + (i % 2 ) ? "Slave" : "Master", i); + } + } + + /* Below is CIM InitSataLateFar */ + /* Enable interrupts from the HBA */ + byte = read8(sata_bar5 + 0x4); + byte |= 1 << 1; + write8((sata_bar5 + 0x4), byte); + + /* Clear error status */ + write32((sata_bar5 + 0x130), 0xFFFFFFFF); + write32((sata_bar5 + 0x1b0), 0xFFFFFFFF); + write32((sata_bar5 + 0x230), 0xFFFFFFFF); + write32((sata_bar5 + 0x2b0), 0xFFFFFFFF); + write32((sata_bar5 + 0x330), 0xFFFFFFFF); + write32((sata_bar5 + 0x3b0), 0xFFFFFFFF); + + /* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */ + /* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */ + + /* word = 0x0000; */ + /* word = pm_ioread(0x28); */ + /* byte = pm_ioread(0x29); */ + /* word |= byte<<8; */ + /* printk(BIOS_DEBUG, "AcpiGpe0Blk addr = %x\n", word); */ + /* write32(word, 0x80000000); */ +} + +static struct pci_operations lops_pci = { + /* .set_subsystem = pci_dev_set_subsystem, */ +}; + +static struct device_operations sata_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = sata_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static const struct pci_driver sata0_driver __pci_driver = { + .ops = &sata_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_SATA, +}; diff --git a/src/southbridge/amd/sb800/sb800.c b/src/southbridge/amd/sb800/sb800.c new file mode 100644 index 0000000000..f6b7d80f3b --- /dev/null +++ b/src/southbridge/amd/sb800/sb800.c @@ -0,0 +1,393 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> + +#include <arch/io.h> + +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "sb800.h" +#include "smbus.h" + +static device_t find_sm_dev(device_t dev, u32 devfn) +{ + device_t sm_dev; + + sm_dev = dev_find_slot(dev->bus->secondary, devfn); + if (!sm_dev) + return sm_dev; + + if ((sm_dev->vendor != PCI_VENDOR_ID_ATI) || + ((sm_dev->device != PCI_DEVICE_ID_ATI_SB800_SM))) { + u32 id; + id = pci_read_config32(sm_dev, PCI_VENDOR_ID); + if ((id != + (PCI_VENDOR_ID_ATI | (PCI_DEVICE_ID_ATI_SB800_SM << 16)))) + { + sm_dev = 0; + } + } + + return sm_dev; +} + +void set_sm_enable_bits(device_t sm_dev, u32 reg_pos, u32 mask, u32 val) +{ + u32 reg_old, reg; + reg = reg_old = pci_read_config32(sm_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + pci_write_config32(sm_dev, reg_pos, reg); + } +} + +static void pmio_write_index(u16 port_base, u8 reg, u8 value) +{ + outb(reg, port_base); + outb(value, port_base + 1); +} + +static u8 pmio_read_index(u16 port_base, u8 reg) +{ + outb(reg, port_base); + return inb(port_base + 1); +} + +void pm_iowrite(u8 reg, u8 value) +{ + pmio_write_index(PM_INDEX, reg, value); +} + +u8 pm_ioread(u8 reg) +{ + return pmio_read_index(PM_INDEX, reg); +} + +void pm2_iowrite(u8 reg, u8 value) +{ + pmio_write_index(PM2_INDEX, reg, value); +} + +u8 pm2_ioread(u8 reg) +{ + return pmio_read_index(PM2_INDEX, reg); +} + +static void set_pmio_enable_bits(u32 reg_pos, u32 mask, u32 val) +{ + u8 reg_old, reg; + reg = reg_old = pm_ioread(reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + pm_iowrite(reg_pos, reg); + } +} + +u16 tx_convert_table[] = { + [0x0] = 0xFFFF, + [0x1] = 0xFFFE, + [0x2] = 0xFFFC, + [0x3] = 0xFFF8, + [0x4] = 0xFFF0, + [0x5] = 0xFFE0, + [0x6] = 0xFFC0, + [0x7] = 0xFF80, + [0x8] = 0xFF00, + [0x9] = 0xFE00, + [0xA] = 0xFC00, + [0xB] = 0xF800, + [0xC] = 0xF000, + [0xD] = 0xE000, + [0xE] = 0xC000, + [0xF] = 0x8000 +}; + +u16 rx_convert_table[] = { + [0x0] = 0x0001, + [0x1] = 0x0003, + [0x2] = 0x0007, + [0x3] = 0x000F, + [0x4] = 0x001F, + [0x5] = 0x003F, + [0x6] = 0x007F, + [0x7] = 0x00FF, + [0x8] = 0x01FF, + [0x9] = 0x03FF, + [0xA] = 0x07FF, + [0xB] = 0x0FFF, + [0xC] = 0x1FFF, + [0xD] = 0x3FFF, + [0xE] = 0x7FFF, + [0xF] = 0xFFFF +}; + +/* PCIe General Purpose Ports */ +/* v:1814, d:3090. cp421A */ +static void set_sb800_gpp(device_t dev) +{ + struct southbridge_amd_sb800_config *conf; + u32 imp_rb, lc_status; + u8 port; + + conf = dev->chip_info; + port = dev->path.pci.devfn & 3; + + /* 5.1 GPP Lane Configuration */ + /* To support one of 4 legal configurations: + * 0000: PortA lanes[3:0] + * 0001: N/A + * 0010: PortA lanes[1:0], PortB lanes[3:2] + * 0011: PortA lanes[1:0], PortB lane2, PortC lane3 + * 0100: PortA lane0, PortB lane1, PortC lane2, PortD lane3. + * Other combinations are not supported. + */ + /* CIMx: Set abcfg:0x90[20] = 1 to enable GPP bridge multi-function */ + abcfg_reg(0x90, 1 << 20, 1 << 20); + + printk(BIOS_DEBUG, "set_sb800_gpp() 1\n"); + //abcfg_reg(0xC0, 0xF << 0, 0x4 << 0); /* bimini:4; tarpon:3 */ + abcfg_reg(0xC0, 0xF << 0, (conf->gpp_configuration & 0xF) << 0); /* bimini:4; tarpon:3 */ + + printk(BIOS_DEBUG, "set_sb800_gpp() 2,\n"); + /* 5.2 Enabling GPP Port A/B/C/D */ + //abcfg_reg(0xC0, 0xF << 4, 0x1 << 4); + abcfg_reg(0xC0, 0xF << 4, dev->enabled ? 0x1 << (4 + port) : 0); + + printk(BIOS_DEBUG, "set_sb800_gpp() 3\n"); + /* 5.3 Releasing GPP Reset */ + abcfg_reg(0xC0, 0x1 << 8, 0x0 << 8); + + /* release training */ + abcfg_reg(0xC0, 0xF << 12, 0x0 << 12); + /* 5.4 Power Saving Feature for GPP Lanes. Skip */ + /* 5.5 PCIe Ports De-emphasis Settings. Skip */ + abcfg_reg(0x340, 1 << 21, 0 << 21); + abcfg_reg(0x344, 1 << 21, 0 << 21); + abcfg_reg(0x348, 1 << 21, 0 << 21); + abcfg_reg(0x34C, 1 << 21, 0 << 21); + /* 5.6 PCIe PHY Calibration Impedance Value Setting */ + /* AXINDC_Reg 0x60: TX_IMP_RB */ + outl(0x30, 0xCD8); + outl(0x60, 0xCDC); + outl(0x34, 0xCD8); + imp_rb = inl(0xCDC); + + printk(BIOS_DEBUG, "imp_rb 1=%x\n", imp_rb); + /* tx */ + abcfg_reg(0xA4, 0x1FFF, (rx_convert_table[(imp_rb>>8)&0xF]) & 0x1FFF); + abcfg_reg(0xA4, 0x1FFF<<19, ((tx_convert_table[(imp_rb>>4)&0xF] >> 3) & 0x1FFF) << 19); + + /* 5.4. */ + abcfg_reg(0xA0, 3 << 12, 3 << 12); + + axindxp_reg(0xa0, 0xf<<4, 3<<4); + rcindxp_reg(0xA0, 0, 0xF << 4, 1 << 0); + rcindxp_reg(0xA0, 1, 0xF << 4, 1 << 0); + rcindxp_reg(0xA0, 2, 0xF << 4, 1 << 0); + rcindxp_reg(0xA0, 3, 0xF << 4, 1 << 0); + + /* 5.8 Disabling Serial Number Capability */ + abcfg_reg(0x330, 1 << 26, 0 << 26); + + abcfg_reg(0x50, 0xFFFFFFFF, 0x04000004); + abcfg_reg(0x54, 0xFFFFFFFF, 0x00040000); + abcfg_reg(0x80, 0xFFFFFFFF, 0x03060001); + abcfg_reg(0x90, 0xFFFFFFFF, 0x00300000); + abcfg_reg(0x98, 0xFFFFFFFF, 0x03034700); + + pci_write_config32(dev, 0x80, 0x00000006); + /* Set PCIEIND_P:PCIE_RX_CNTL[RX_RCB_CPL_TIMEOUT_MODE] (0x70:[19]) = 1 */ + rcindxp_reg(0x70, 0, 1 << 19, 1 << 19); + //outl(3<<29|0<<24|0x70, 0xCD8); + /* Set PCIEIND_P:PCIE_TX_CNTL[TX_FLUSH_TLP_DIS] (0x20:[19]) = 0 */ + rcindxp_reg(0x20, 0, 1 << 19, 0 << 19); + printk(BIOS_DEBUG, "imp_rb 5=%x\n", imp_rb); + outl(3<<29|0<<24|0xA5, 0xCD8); + lc_status = inl(0xCDC); + printk(BIOS_DEBUG, "lc_status=%x\n", lc_status); +} + +void sb800_enable(device_t dev) +{ + device_t sm_dev = 0; + device_t bus_dev = 0; + int index = -1; + u32 deviceid; + u32 vendorid; + + /* struct southbridge_ati_sb800_config *conf; */ + /* conf = dev->chip_info; */ + int i; + + u32 devfn, dword; + + printk(BIOS_DEBUG, "sb800_enable()\n"); + + /* + * 0:11.0 SATA bit 8 of pmio 0xDA : 1 - enable + * 0:12.0 OHCI-USB1 bit 0 of pmio 0xEF + * 0:12.2 EHCI-USB1 bit 1 of pmio 0xEF + * 0:13.0 OHCI-USB2 bit 2 of pmio 0xEF + * 0:13.2 EHCI-USB2 bit 3 of pmio 0xEF + * 0:16.1 OHCI-USB3 bit 4 of pmio 0xEF + * 0:16.2 EHCI-USB3 bit 5 of pmio 0xEF + * 0:14.5 OHCI-USB4 bit 6 of pmio 0xEF + * 0:14.0 SMBUS 0 + * 0:14.1 IDE 1 + * 0:14.2 HDA bit 0 of pm_io 0xEB : 1 - enable + * 0:14.3 LPC bit 0 of pm_io 0xEC : 1 - enable + * 0:14.4 PCI bit 0 of pm_io 0xEA : 0 - enable + * 0:14.6 GEC bit 0 of pm_io 0xF6 : 0 - enable + */ + if (dev->device == 0x0000) { + vendorid = pci_read_config32(dev, PCI_VENDOR_ID); + deviceid = (vendorid >> 16) & 0xffff; + vendorid &= 0xffff; + } else { + vendorid = dev->vendor; + deviceid = dev->device; + } + bus_dev = dev->bus->dev; + if ((bus_dev->vendor == PCI_VENDOR_ID_ATI) && + (bus_dev->device == PCI_DEVICE_ID_ATI_SB800_PCI)) { + devfn = (bus_dev->path.pci.devfn) & ~7; + sm_dev = find_sm_dev(bus_dev, devfn); + if (!sm_dev) + return; + + /* something under 00:01.0 */ + switch (dev->path.pci.devfn) { + case 5 << 3: + ; + } + + return; + } + printk(BIOS_DEBUG, "sb800_enable() 1\n"); + + i = (dev->path.pci.devfn) & ~7; + i += (3 << 3); + for (devfn = (0x14 << 3); devfn <= i; devfn += (1 << 3)) { + sm_dev = find_sm_dev(dev, devfn); + if (sm_dev) + break; + } + if (!sm_dev) + return; + printk(BIOS_DEBUG, "sb800_enable() 2\n"); + + switch (dev->path.pci.devfn - (devfn - (0x14 << 3))) { + case (0x11 << 3) | 0: + index = 8; + set_pmio_enable_bits(0xDA, 1 << 0, + (dev->enabled ? 1 : 0) << 0); + /* Set the device ID of SATA as 0x4390 to reduce the confusing. */ + dword = pci_read_config32(dev, 0x40); + dword |= 1 << 0; + pci_write_config32(dev, 0x40, dword); + pci_write_config16(dev, 0x2, 0x4390); + dword &= ~1; + pci_write_config32(dev, 0x40, dword);//for (;;); + index += 32 * 3; + break; + case (0x12 << 3) | 0: + case (0x12 << 3) | 2: + index = (dev->path.pci.devfn & 0x3) / 2; + set_pmio_enable_bits(0xEF, 1 << index, + (dev->enabled ? 1 : 0) << index); + break; + case (0x13 << 3) | 0: + case (0x13 << 3) | 2: + index = (dev->path.pci.devfn & 0x3) / 2 + 2; + set_pmio_enable_bits(0xEF, 1 << index, + (dev->enabled ? 1 : 0) << index); + index += 32 * 2; + break; + case (0x14 << 3) | 0: + index = 0; + break; + case (0x14 << 3) | 1: + index = 1; + set_pmio_enable_bits(0xDA, 1 << 3, + (dev->enabled ? 0 : 1) << 3); + break; + case (0x14 << 3) | 2: + index = 0; + set_pmio_enable_bits(0xEB, 1 << index, + (dev->enabled ? 1 : 0) << index); + break; + case (0x14 << 3) | 3: + index = 0; + set_pmio_enable_bits(0xEC, 1 << index, + (dev->enabled ? 1 : 0) << index); + index += 32 * 1; + break; + case (0x14 << 3) | 4: + index = 0; + set_pmio_enable_bits(0xEA, 1 << index, + (dev->enabled ? 0 : 1) << index); + break; + case (0x14 << 3) | 5: + index = 6; + set_pmio_enable_bits(0xEF, 1 << index, + (dev->enabled ? 1 : 0) << index); + break; + case (0x14 << 3) | 6: + /* From linux-2.6.32 to 2.6.34, the broadcom has problems + * about the sequence of installing drivers. The solution is + * modifying the file "/etc/rc.local", or just running: + * + * touch /var/lock/subsys/local + * modprobe -r tg3 + * modprobe broadcom + * modprobe tg3 + */ + index = 0; + set_pmio_enable_bits(0xF6, 1 << index, + (dev->enabled ? 0 : 1) << index); + break; + case (0x15 << 3) | 0: + set_sb800_gpp(dev); + index = 4; + break; + case (0x15 << 3) | 1: + case (0x15 << 3) | 2: + case (0x15 << 3) | 3: + break; + case (0x16 << 3) | 0: + case (0x16 << 3) | 2: + index = (dev->path.pci.devfn & 0x3) / 2 + 4; + set_pmio_enable_bits(0xEF, 1 << index, + (dev->enabled ? 1 : 0) << index); + break; + default: + printk(BIOS_DEBUG, "unknown dev: %s deviceid=%4x\n", dev_path(dev), + deviceid); + } +} + +struct chip_operations southbridge_amd_sb800_ops = { + CHIP_NAME("ATI SB800") + .enable_dev = sb800_enable, +}; diff --git a/src/southbridge/amd/sb800/sb800.h b/src/southbridge/amd/sb800/sb800.h new file mode 100644 index 0000000000..80578c1232 --- /dev/null +++ b/src/southbridge/amd/sb800/sb800.h @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SB800_H +#define SB800_H + +#include <device/pci_ids.h> +#include "chip.h" + +/* Power management index/data registers */ +#define PM_INDEX 0xcd6 +#define PM_DATA 0xcd7 +#define PM2_INDEX 0xcd0 +#define PM2_DATA 0xcd1 + +#define SB800_ACPI_IO_BASE 0x800 + +#define ACPI_PM_EVT_BLK (SB800_ACPI_IO_BASE + 0x00) /* 4 bytes */ +#define ACPI_PM1_CNT_BLK (SB800_ACPI_IO_BASE + 0x04) /* 2 bytes */ +#define ACPI_PMA_CNT_BLK (SB800_ACPI_IO_BASE + 0x0F) /* 1 byte */ +#define ACPI_PM_TMR_BLK (SB800_ACPI_IO_BASE + 0x18) /* 4 bytes */ +#define ACPI_GPE0_BLK (SB800_ACPI_IO_BASE + 0x10) /* 8 bytes */ +#define ACPI_CPU_CONTROL (SB800_ACPI_IO_BASE + 0x08) /* 6 bytes */ + +extern void pm_iowrite(u8 reg, u8 value); +extern u8 pm_ioread(u8 reg); +extern void pm2_iowrite(u8 reg, u8 value); +extern u8 pm2_ioread(u8 reg); +extern void set_sm_enable_bits(device_t sm_dev, u32 reg_pos, u32 mask, u32 val); + +#define REV_SB800_A11 0x11 +#define REV_SB800_A12 0x12 + +/* This shouldn't be called before set_sb800_revision() is called. + * Once set_sb800_revision() is called, we use get_sb800_revision(), + * the simpler one, to get the sb800 revision ID. + * The id is 0x39 if A11, 0x3A if A12, 0x3C if A14, 0x3D if A15. + * The differentiate is 0x28, isn't it? */ +//#define get_sb800_revision(sm_dev) (pci_read_config8((sm_dev), 0x08) - 0x28) + +void sb800_enable(device_t dev); +void sb800_enable_usbdebug(unsigned int port); + +#endif /* SB800_H */ diff --git a/src/southbridge/amd/sb800/sm.c b/src/southbridge/amd/sb800/sm.c new file mode 100644 index 0000000000..9347c42f32 --- /dev/null +++ b/src/southbridge/amd/sb800/sm.c @@ -0,0 +1,357 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <device/smbus.h> +#include <pc80/mc146818rtc.h> +#include <bitops.h> +#include <arch/io.h> +#include <cpu/x86/lapic.h> +#include <arch/ioapic.h> +#include <stdlib.h> +#include "sb800.h" +#include "smbus.c" + +#define NMI_OFF 0 + +#define MAINBOARD_POWER_OFF 0 +#define MAINBOARD_POWER_ON 1 + +#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL +#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON +#endif + +#define BIT0 (1 << 0) +#define BIT1 (1 << 1) +#define BIT2 (1 << 2) +#define BIT3 (1 << 3) +#define BIT4 (1 << 4) +#define BIT5 (1 << 5) +#define BIT6 (1 << 6) +#define BIT7 (1 << 7) + +#define BIT8 (1 << 8 ) +#define BIT9 (1 << 9 ) +#define BIT10 (1 << 10) +#define BIT11 (1 << 11) +#define BIT12 (1 << 12) +#define BIT13 (1 << 13) +#define BIT14 (1 << 14) +#define BIT15 (1 << 15) + +#define BIT16 (1 << 16) +#define BIT17 (1 << 17) +#define BIT18 (1 << 18) +#define BIT19 (1 << 19) +#define BIT20 (1 << 20) +#define BIT21 (1 << 21) +#define BIT22 (1 << 22) +#define BIT23 (1 << 23) +#define BIT24 (1 << 24) +#define BIT25 (1 << 25) +#define BIT26 (1 << 26) +#define BIT27 (1 << 27) +#define BIT28 (1 << 28) +#define BIT29 (1 << 29) +#define BIT30 (1 << 30) +#define BIT31 (1 << 31) + +/* +* SB800 enables all USB controllers by default in SMBUS Control. +* SB800 enables SATA by default in SMBUS Control. +*/ + +static void sm_init(device_t dev) +{ + u8 byte; + u32 ioapic_base; + + printk(BIOS_INFO, "sm_init().\n"); + + ioapic_base = 0xFEC00000;//pci_read_config32(dev, 0x74) & (0xffffffe0); /* some like mem resource, but does not have enable bit */ + /* Don't rename APIC ID */ + /* TODO: We should call setup_ioapic() here. But kernel hangs if cpu is K8. + * We need to check out why and change back. */ + clear_ioapic(ioapic_base); + //setup_ioapic(ioapic_base, 0); + + /* enable serial irq */ + byte = pm_ioread(0x54); + byte |= 1 << 7; /* enable serial irq function */ + byte &= ~(0xF << 2); + byte |= 4 << 2; /* set NumSerIrqBits=4 */ + pm_iowrite(0x54, byte); + + pm_iowrite(0x00, 0x0E); + pm_iowrite(0x0B, 0x02); + /* 2.11 IO Trap Settings */ + abcfg_reg(0x10090, 1 << 16, 1 << 16); + + /* 4.1 ab index */ + //pci_write_config32(dev, 0xF0, AB_INDX); + pm_iowrite(0xE0, AB_INDX & 0xFF); + pm_iowrite(0xE1, (AB_INDX >> 8) & 0xFF); + pm_iowrite(0xE2, (AB_INDX >> 16) & 0xFF); + pm_iowrite(0xE3, (AB_INDX >> 24) & 0xFF); + /* Initialize the real time clock */ + rtc_init(0); + + byte = pm_ioread(0x8); + byte |= 1 << 2 | 1 << 4; + pm_iowrite(0x08, byte); + byte = pm_ioread(0x9); + byte |= 1 << 0; + pm_iowrite(0x09, byte); + + abcfg_reg(0x10060, (BIT31), BIT31); + abcfg_reg(0x1009C, (BIT4 + BIT5), BIT4 + BIT5); + abcfg_reg(0x9C, (BIT2 + BIT3 + BIT4 + BIT5 + BIT6 + BIT7), BIT2 + BIT3 + BIT4 + BIT5 + BIT6 + BIT7); + abcfg_reg(0x90, (BIT21 + BIT22 + BIT23), BIT21 + BIT22 + BIT23); + abcfg_reg(0xF0, (BIT6 + BIT5), BIT6 + BIT5); + abcfg_reg(0x10090, (BIT9 + BIT10 + BIT11 + BIT12), BIT9 + BIT10 + BIT11 + BIT12); + abcfg_reg(0x58, (BIT10), BIT10); + abcfg_reg(0xF0, (BIT3 + BIT4), BIT3 + BIT4); + abcfg_reg(0x54, (BIT1), BIT1); + // + axindxc_reg(0x02, BIT9, BIT9); + axindxc_reg(0x10, BIT9, BIT9); + + /* 4.2 Enabling Upstream DMA Access */ + axcfg_reg(0x04, 1 << 2, 1 << 2); + /* 4.3 Enabling PCIB Prefetch Settings */ + abcfg_reg(0x10060, 1 << 20, 1 << 20); + abcfg_reg(0x10064, 1 << 20, 1 << 20); + + /* 4.4 Enabling OHCI Prefetch for Performance Enhancement, A12 */ + abcfg_reg(0x80, 1 << 0, 1<< 0); + + /* 4.5 B-Link Client's Credit Variable Settings for the Downstream Arbitration Equation */ + /* 4.6 Enabling Additional Address Bits Checking in Downstream */ + abcfg_reg(0x9c, 1 << 0, 1 << 0); + //abcfg_reg(0x9c, 3 << 0, 3 << 0); //A11 + + /* 4.7 Set B-Link Prefetch Mode */ + abcfg_reg(0x80, 3 << 17, 3 << 17); + + // RPR Enabled SMI ordering enhancement. ABCFG 0x90[21] + // RPR USB Delay A-Link Express L1 State. ABCFG 0x90[17] + abcfg_reg(0x90, 1 << 17 | 1 << 21, 1 << 17 | 1 << 21); + /* 4.8 Enabling Detection of Upstream Interrupts */ + abcfg_reg(0x94, 1 << 20 | 0x7FFFF, 1 << 20 | 0x00FEE); + + /* 4.9: Enabling Downstream Posted Transactions to Pass Non-Posted + * Transactions for the K8 Platform (for All Revisions) */ + abcfg_reg(0x10090, 1 << 8, 1 << 8); + + /* 4.10:Programming Cycle Delay for AB and BIF Clock Gating */ + /* 4.11:Enabling AB Int_Arbiter Enhancement (for All Revisions) */ + abcfg_reg(0x10054, 0xFFFF0000, 0x01040000); + abcfg_reg(0x54, 0xFF << 16, 4 << 16); + abcfg_reg(0x54, 1 << 24, 0 << 24); + abcfg_reg(0x54, 1 << 26, 1 << 26); + abcfg_reg(0x98, 0xFFFFFF00, 0x00004700); + + /* 4.12: Enabling AB and BIF Clock Gating */ + abcfg_reg(0x10054, 0x0000FFFF, 0x07FF); + + /* 4.13:Enabling Requester ID for upstream traffic. */ + abcfg_reg(0x98, 3 << 16, 3 << 16); + + abcfg_reg(0x50, 1 << 2, 0 << 2); + + /* 5.2 Enabling GPP Port A/B/C/D */ + //abcfg_reg(0xC0, 0xF << 4, 0xF << 4); + + /* Enable SCI as irq9. */ + outb(0x10, 0xC00); + outb(0x9, 0xC01); + /* Enabled IRQ input */ + outb(0x9, 0xC00); + outb(0xF7, 0xC01); + + abcfg_reg(0x90, 0xFFFFFFFF, 0x00F80040); + abcfg_reg(0xA0, 0xFFFFFFFF, 0x00000000); + abcfg_reg(0xA4, 0xFFFFFFFF, 0x00000000); + abcfg_reg(0xC0, 0xFFFFFFFF, 0x0000F014); + abcfg_reg(0x98, 0xFFFFFFFF, 0X01034700); +} + +static int lsmbus_recv_byte(device_t dev) +{ + u32 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + + res = find_resource(pbus->dev, 0x90); + + return do_smbus_recv_byte(res->base, device); +} + +static int lsmbus_send_byte(device_t dev, u8 val) +{ + u32 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + + res = find_resource(pbus->dev, 0x90); + + return do_smbus_send_byte(res->base, device, val); +} + +static int lsmbus_read_byte(device_t dev, u8 address) +{ + u32 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + + res = find_resource(pbus->dev, 0x90); + + return do_smbus_read_byte(res->base, device, address); +} + +static int lsmbus_write_byte(device_t dev, u8 address, u8 val) +{ + u32 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + + res = find_resource(pbus->dev, 0x90); + + return do_smbus_write_byte(res->base, device, address, val); +} +static struct smbus_bus_operations lops_smbus_bus = { + .recv_byte = lsmbus_recv_byte, + .send_byte = lsmbus_send_byte, + .read_byte = lsmbus_read_byte, + .write_byte = lsmbus_write_byte, +}; + +static void sb800_sm_read_resources(device_t dev) +{ + struct resource *res; + u8 byte; + + /* rpr2.14: Hides SM bus controller Bar1 where stores HPET MMIO base address */ + byte = pm_ioread(0x55); + byte |= 1 << 7; + pm_iowrite(0x55, byte); + + /* Get the normal pci resources of this device */ + /* pci_dev_read_resources(dev); */ + + byte = pm_ioread(0x55); + byte &= ~(1 << 7); + pm_iowrite(0x55, byte); + + /* apic */ + res = new_resource(dev, 0x74); + res->base = 0xfec00000; + res->size = 256 * 0x10; + res->limit = 0xFEFFFFFUL; /* res->base + res->size -1; */ + res->align = 8; + res->gran = 8; + res->flags = IORESOURCE_MEM | IORESOURCE_FIXED; + + #if 0 /* Linux ACPI crashes when it is 1. For late debugging. */ + res = new_resource(dev, 0x14); /* TODO: hpet */ + res->base = 0xfed00000; /* reset hpet to widely accepted address */ + res->size = 0x400; + res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */ + res->align = 8; + res->gran = 8; + res->flags = IORESOURCE_MEM | IORESOURCE_FIXED; + #endif + /* dev->command |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; */ + + /* smbus */ + //res = new_resource(dev, 0x90); + //res->base = 0xB00; + //res->size = 0x10; + //res->limit = 0xFFFFUL; /* res->base + res->size -1; */ + //res->align = 8; + //res->gran = 8; + //res->flags = IORESOURCE_IO | IORESOURCE_FIXED; + + + compact_resources(dev); +} + +static void sb800_sm_set_resources(struct device *dev) +{ + struct resource *res; + u8 byte; + + pci_dev_set_resources(dev); + + + /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */ + byte = pm_ioread(0x52); + byte |= 1 << 6; + pm_iowrite(0x52, byte); + + res = find_resource(dev, 0x74); + + printk(BIOS_INFO, "sb800_sm_set_resources, res->base=0x%llx\n", res->base); + + //pci_write_config32(dev, 0x74, res->base | 1 << 3); + pm_iowrite(0x34, res->base | 0x7); + pm_iowrite(0x35, (res->base >> 8) & 0xFF); + pm_iowrite(0x36, (res->base >> 16) & 0xFF); + pm_iowrite(0x37, (res->base >> 24) & 0xFF); +#if 0 /* TODO:hpet */ + res = find_resource(dev, 0x14); + pci_write_config32(dev, 0x14, res->base); +#endif + //res = find_resource(dev, 0x90); + //pci_write_config32(dev, 0x90, res->base | 1); +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; +static struct device_operations smbus_ops = { + .read_resources = sb800_sm_read_resources, + .set_resources = sb800_sm_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = sm_init, + .scan_bus = scan_static_bus, + .ops_pci = &lops_pci, + .ops_smbus_bus = &lops_smbus_bus, +}; +static const struct pci_driver smbus_driver __pci_driver = { + .ops = &smbus_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_SM, +}; diff --git a/src/southbridge/amd/sb800/smbus.c b/src/southbridge/amd/sb800/smbus.c new file mode 100644 index 0000000000..9db936c31f --- /dev/null +++ b/src/southbridge/amd/sb800/smbus.c @@ -0,0 +1,253 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _SB800_SMBUS_C_ +#define _SB800_SMBUS_C_ + +#include "smbus.h" + +static inline void smbus_delay(void) +{ + outb(inb(0x80), 0x80); +} + +static int smbus_wait_until_ready(u32 smbus_io_base) +{ + u32 loops; + loops = SMBUS_TIMEOUT; + do { + u8 val; + val = inb(smbus_io_base + SMBHSTSTAT); + val &= 0x1f; + if (val == 0) { /* ready now */ + return 0; + } + outb(val, smbus_io_base + SMBHSTSTAT); + } while (--loops); + return -2; /* time out */ +} + +static int smbus_wait_until_done(u32 smbus_io_base) +{ + u32 loops; + loops = SMBUS_TIMEOUT; + do { + u8 val; + + val = inb(smbus_io_base + SMBHSTSTAT); + val &= 0x1f; /* mask off reserved bits */ + if (val & 0x1c) { + return -5; /* error */ + } + if (val == 0x02) { + outb(val, smbus_io_base + SMBHSTSTAT); /* clear status */ + return 0; + } + } while (--loops); + return -3; /* timeout */ +} + +int do_smbus_recv_byte(u32 smbus_io_base, u32 device) +{ + u8 byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; /* not ready */ + } + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; /* Clear [4:2] */ + byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */ + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; /* timeout or error */ + } + + /* read results of transaction */ + byte = inb(smbus_io_base + SMBHSTCMD); + + return byte; +} + +int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val) +{ + u8 byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; /* not ready */ + } + + /* set the command... */ + outb(val, smbus_io_base + SMBHSTCMD); + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; /* Clear [4:2] */ + byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */ + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; /* timeout or error */ + } + + return 0; +} + +int do_smbus_read_byte(u32 smbus_io_base, u32 device, + u32 address) +{ + u8 byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; /* not ready */ + } + + /* set the command/address... */ + outb(address & 0xff, smbus_io_base + SMBHSTCMD); + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; /* Clear [4:2] */ + byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */ + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; /* timeout or error */ + } + + /* read results of transaction */ + byte = inb(smbus_io_base + SMBHSTDAT0); + + return byte; +} + +int do_smbus_write_byte(u32 smbus_io_base, u32 device, + u32 address, u8 val) +{ + u8 byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; /* not ready */ + } + + /* set the command/address... */ + outb(address & 0xff, smbus_io_base + SMBHSTCMD); + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR); + + /* output value */ + outb(val, smbus_io_base + SMBHSTDAT0); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; /* Clear [4:2] */ + byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */ + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; /* timeout or error */ + } + + return 0; +} + +void alink_ab_indx(u32 reg_space, u32 reg_addr, + u32 mask, u32 val) +{ + u32 tmp; + + outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); + tmp = inl(AB_DATA); + /* rpr 4.2 + * For certain revisions of the chip, the ABCFG registers, + * with an address of 0x100NN (where 'N' is any hexadecimal + * number), require an extra programming step.*/ + outl(0, AB_INDX); + + tmp &= ~mask; + tmp |= val; + + /* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | reg_addr); */ + outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); /* probably we dont have to do it again. */ + outl(tmp, AB_DATA); + outl(0, AB_INDX); +} + +void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port, + u32 mask, u32 val) +{ + u32 tmp; + + outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); + tmp = inl(AB_DATA); + /* rpr 4.2 + * For certain revisions of the chip, the ABCFG registers, + * with an address of 0x100NN (where 'N' is any hexadecimal + * number), require an extra programming step.*/ + outl(0, AB_INDX); + + tmp &= ~mask; + tmp |= val; + + //printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | (port&3) << 24 | reg_addr); + outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); /* probably we dont have to do it again. */ + outl(tmp, AB_DATA); + outl(0, AB_INDX); +} + +/* space = 0: AX_INDXC, AX_DATAC + * space = 1: AX_INDXP, AX_DATAP + */ +void alink_ax_indx(u32 space /*c or p? */ , u32 axindc, + u32 mask, u32 val) +{ + u32 tmp; + + /* read axindc to tmp */ + outl(space << 29 | space << 3 | 0x30, AB_INDX); + outl(axindc, AB_DATA); + outl(0, AB_INDX); + outl(space << 29 | space << 3 | 0x34, AB_INDX); + tmp = inl(AB_DATA); + outl(0, AB_INDX); + + tmp &= ~mask; + tmp |= val; + + /* write tmp */ + outl(space << 29 | space << 3 | 0x30, AB_INDX); + outl(axindc, AB_DATA); + outl(0, AB_INDX); + outl(space << 29 | space << 3 | 0x34, AB_INDX); + outl(tmp, AB_DATA); + outl(0, AB_INDX); +} +#endif diff --git a/src/southbridge/amd/sb800/smbus.h b/src/southbridge/amd/sb800/smbus.h new file mode 100644 index 0000000000..fce8e96572 --- /dev/null +++ b/src/southbridge/amd/sb800/smbus.h @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SB800_SMBUS_H +#define SB800_SMBUS_H + +//#include <stdint.h> + +#define SMBHSTSTAT 0x0 +#define SMBSLVSTAT 0x1 +#define SMBHSTCTRL 0x2 +#define SMBHSTCMD 0x3 +#define SMBHSTADDR 0x4 +#define SMBHSTDAT0 0x5 +#define SMBHSTDAT1 0x6 +#define SMBHSTBLKDAT 0x7 + +#define SMBSLVCTRL 0x8 +#define SMBSLVCMD_SHADOW 0x9 +#define SMBSLVEVT 0xa +#define SMBSLVDAT 0xc + +#define AX_INDXC 0 +#define AX_INDXP 2 +#define AXCFG 4 +#define ABCFG 6 +#define RC_INDXC 1 +#define RC_INDXP 3 + +#define AB_INDX 0xCD8 +#define AB_DATA (AB_INDX+4) + +/* Between 1-10 seconds, We should never timeout normally + * Longer than this is just painful when a timeout condition occurs. + */ +#define SMBUS_TIMEOUT (100*1000*10) + +#define abcfg_reg(reg, mask, val) \ + alink_ab_indx((ABCFG), (reg), (mask), (val)) +#define axcfg_reg(reg, mask, val) \ + alink_ab_indx((AXCFG), (reg), (mask), (val)) +#define axindxc_reg(reg, mask, val) \ + alink_ax_indx((AX_INDXC), (reg), (mask), (val)) +#define axindxp_reg(reg, mask, val) \ + alink_ax_indx((AX_INDXP), (reg), (mask), (val)) +#define rcindxc_reg(reg, port, mask, val) \ + alink_rc_indx((RC_INDXC), (reg), (port), (mask), (val)) +#define rcindxp_reg(reg, port, mask, val) \ + alink_rc_indx((RC_INDXP), (reg), (port), (mask), (val)) + +int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); +int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); +int do_smbus_recv_byte(u32 smbus_io_base, u32 device); +int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val); +void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port, u32 mask, u32 val); +void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val); +void alink_ax_indx(u32 space /*c or p? */ , u32 axindc, u32 mask, u32 val); + + +#endif diff --git a/src/southbridge/amd/sb800/usb.c b/src/southbridge/amd/sb800/usb.c new file mode 100644 index 0000000000..473ff5e199 --- /dev/null +++ b/src/southbridge/amd/sb800/usb.c @@ -0,0 +1,234 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <usbdebug.h> +#include <arch/io.h> +#include "sb800.h" + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static void usb_init(struct device *dev) +{ + u8 byte; + u16 word; + + /* 7.1 Enable OHCI0-4 and EHCI Controllers */ + /* pmio 0xEF; */ + + /* RPR 7.2 USB S4/S5 Wake-up or PHY Power-down Support */ + byte = pm_ioread(0xF0); + byte |= 1 << 0; /* A12, USB Wake from S5 not supported on the platform */ + pm_iowrite(0xF0, byte); + + /* RPR 7.4 Enable the USB controller to get reset by any software that generate a PCIRst# condition */ + byte = pm_ioread(0xF0); + byte |= (1 << 2); + byte |= 3 << 8; /* rpr 7.5 */ + pm_iowrite(0xF0, byte); + + /* RPR 7.9 Disable OHCI MSI Capability. */ + word = pci_read_config16(dev, 0x40); + word |= (0x1 << 8); + pci_write_config16(dev, 0x40, word); +} + +static void usb_init2(struct device *dev) +{ + u32 dword; + u32 usb2_bar0; + device_t sm_dev; + + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + //rev = get_sb800_revision(sm_dev); + + /* dword = pci_read_config32(dev, 0xf8); */ + /* dword |= 40; */ + /* pci_write_config32(dev, 0xf8, dword); */ + + usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF; + printk(BIOS_INFO, "usb2_bar0=0x%x\n", usb2_bar0); + + /* RPR7.3 Enables the USB PHY auto calibration resister to match 45ohm resistence */ + dword = 0x00020F00; + write32(usb2_bar0 + 0xC0, dword); + + /* RPR7.8 Sets In/OUT FIFO threshold for best performance */ + dword = 0x00400040; + write32(usb2_bar0 + 0xA4, dword); + + /* RPR7.10 Disable EHCI MSI support */ + dword = pci_read_config32(dev, 0x50); + dword |= (1 << 6); + pci_write_config32(dev, 0x50, dword); + + /* RPR7.12 EHCI Async Park Mode */ + dword = pci_read_config32(dev, 0x50); + dword &= ~(0xF << 8); + dword &= ~(0xF << 12); + dword |= 1 << 8; + dword |= 2 << 12; + pci_write_config32(dev, 0x50, dword); + + /* RPR 6.12 EHCI Advance PHY Power Savings */ + /* RPR says it is just for A12. CIMM sets it when it is above A11. */ + /* But it makes the linux crash, so we skip it */ + #if 0 + dword = pci_read_config32(dev, 0x50); + dword |= 1 << 31; + pci_write_config32(dev, 0x50, dword); + #endif + + /* Each step below causes the linux crashes. Leave them here + * for future debugging. */ +#if 0 + u8 byte; + u16 word; + + + /* RPR6.17 Disable the EHCI Dynamic Power Saving feature */ + word = read32(usb2_bar0 + 0xBC); + word &= ~(1 << 12); + write16(usb2_bar0 + 0xBC, word); + + /* RPR6.19 USB Controller DMA Read Delay Tolerant. */ + if (rev >= REV_SB800_A14) { + byte = pci_read_config8(dev, 0x50); + byte |= (1 << 7); + pci_write_config8(dev, 0x50, byte); + } + + /* RPR6.20 Async Park Mode. */ + /* RPR recommends not to set these bits. */ + #if 0 + dword = pci_read_config32(dev, 0x50); + dword |= 1 << 23; + if (rev >= REV_SB800_A14) { + dword &= ~(1 << 2); + } + pci_write_config32(dev, 0x50, dword); + #endif + + /* RPR6.22 Advance Async Enhancement */ + /* RPR6.23 USB Periodic Cache Setting */ + dword = pci_read_config32(dev, 0x50); + if (rev == REV_SB800_A12) { + dword |= 1 << 28; /* 6.22 */ + dword |= 1 << 27; /* 6.23 */ + } else if (rev >= REV_SB800_A14) { + dword |= 1 << 3; + dword &= ~(1 << 28); /* 6.22 */ + dword |= 1 << 8; + dword &= ~(1 << 27); /* 6.23 */ + } + printk(BIOS_DEBUG, "rpr 6.23, final dword=%x\n", dword); +#endif +} + +static void usb_set_resources(struct device *dev) +{ +#if CONFIG_USBDEBUG + struct resource *res; + u32 base; + u32 old_debug; + + old_debug = get_ehci_debug(); + set_ehci_debug(0); +#endif + pci_dev_set_resources(dev); + +#if CONFIG_USBDEBUG + res = find_resource(dev, 0x10); + set_ehci_debug(old_debug); + if (!res) + return; + base = res->base; + set_ehci_base(base); + report_resource_stored(dev, res, ""); +#endif + +} + +static struct device_operations usb_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = usb_set_resources, /* pci_dev_set_resources, */ + .enable_resources = pci_dev_enable_resources, + .init = usb_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static const struct pci_driver usb_0_driver __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_USB_18_0, +}; +static const struct pci_driver usb_1_driver __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_USB_18_2, +}; + +/* the pci id of usb ctrl 0 and 1 are the same. */ +/* + * static const struct pci_driver usb_3_driver __pci_driver = { + * .ops = &usb_ops, + * .vendor = PCI_VENDOR_ID_ATI, + * .device = PCI_DEVICE_ID_ATI_SB800_USB_19_0, + * }; + * static const struct pci_driver usb_4_driver __pci_driver = { + * .ops = &usb_ops, + * .vendor = PCI_VENDOR_ID_ATI, + * .device = PCI_DEVICE_ID_ATI_SB800_USB_19_1, + * }; + */ + +static const struct pci_driver usb_4_driver __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_USB_20_5, +}; + +static struct device_operations usb_ops2 = { + .read_resources = pci_dev_read_resources, + .set_resources = usb_set_resources, /* pci_dev_set_resources, */ + .enable_resources = pci_dev_enable_resources, + .init = usb_init2, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static const struct pci_driver usb_5_driver __pci_driver = { + .ops = &usb_ops2, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB800_USB_18_2, +}; +/* + * static const struct pci_driver usb_5_driver __pci_driver = { + * .ops = &usb_ops2, + * .vendor = PCI_VENDOR_ID_ATI, + * .device = PCI_DEVICE_ID_ATI_SB800_USB_19_2, + * }; + */ |