diff options
Diffstat (limited to 'src/southbridge/amd')
| -rw-r--r-- | src/southbridge/amd/sb700/sata.c | 47 |
1 files changed, 35 insertions, 12 deletions
diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c index ae4444600b..63c07d86c4 100644 --- a/src/southbridge/amd/sb700/sata.c +++ b/src/southbridge/amd/sb700/sata.c @@ -131,6 +131,8 @@ static void sata_init(struct device *dev) /* get rev_id */ rev_id = pci_read_config8(sm_dev, 0x08) - 0x28; + printk(BIOS_SPEW, "rev_id=%x\n", rev_id); + if (sata_ahci_mode) { /* Enable link latency enhancement on A14 and above */ if (rev_id >= 0x14) { @@ -241,6 +243,27 @@ static void sata_init(struct device *dev) write32(sata_bar5 + 0xfc, dword); } + if (sata_ahci_mode) { + /* FIXME + * SeaBIOS does not know how to spin + * up the drives and therefore hangs + * in AHCI init if this is enabled... + */ + /* Enable staggered spin-up */ + dword = read32(sata_bar5 + 0x00); +#if 0 + dword |= 0x1 << 27; +#else + dword &= ~(0x1 << 27); +#endif + write32(sata_bar5 + 0x00, dword); + + /* Reset the HBA to avoid stuck drives in SeaBIOS */ + dword = read32(sata_bar5 + 0x04); + dword |= 0x1; + write32(sata_bar5 + 0x04, dword); + } + /* Write protect Sub-Class Code */ byte = pci_read_config8(dev, 0x40); byte &= ~(1 << 0); @@ -367,21 +390,21 @@ static void sata_init(struct device *dev) } /* Below is CIM InitSataLateFar */ - /* Enable interrupts from the HBA */ - byte = read8(sata_bar5 + 0x4); - byte |= 1 << 1; - write8((sata_bar5 + 0x4), byte); - if (!sata_ahci_mode) { - /* Clear error status */ - write32((sata_bar5 + 0x130), 0xFFFFFFFF); - write32((sata_bar5 + 0x1b0), 0xFFFFFFFF); - write32((sata_bar5 + 0x230), 0xFFFFFFFF); - write32((sata_bar5 + 0x2b0), 0xFFFFFFFF); - write32((sata_bar5 + 0x330), 0xFFFFFFFF); - write32((sata_bar5 + 0x3b0), 0xFFFFFFFF); + /* Enable interrupts from the HBA */ + byte = read8(sata_bar5 + 0x4); + byte |= 1 << 1; + write8((sata_bar5 + 0x4), byte); } + /* Clear error status */ + write32((sata_bar5 + 0x130), 0xFFFFFFFF); + write32((sata_bar5 + 0x1b0), 0xFFFFFFFF); + write32((sata_bar5 + 0x230), 0xFFFFFFFF); + write32((sata_bar5 + 0x2b0), 0xFFFFFFFF); + write32((sata_bar5 + 0x330), 0xFFFFFFFF); + write32((sata_bar5 + 0x3b0), 0xFFFFFFFF); + /* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */ /* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */ |