1 files changed, 0 insertions, 71 deletions
diff --git a/src/southbridge/amd/sb800/pci.c b/src/southbridge/amd/sb800/pci.c
deleted file mode 100644
index 025d0a3643..0000000000
--- a/src/southbridge/amd/sb800/pci.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include "sb800.h"
-
-static void pci_init(struct device *dev)
-{
-	u32 dword;
-	u8 byte;
-
-	/* RPR 6.1 Enables the PCI-bridge subtractive decode */
-	/* This setting is strongly recommended since it supports some legacy PCI add-on cards,such as BIOS debug cards */
-	byte = pci_read_config8(dev, 0x4B);
-	byte |= 1 << 7;
-	pci_write_config8(dev, 0x4B, byte);
-	byte = pci_read_config8(dev, 0x40);
-	byte |= 1 << 5;
-	pci_write_config8(dev, 0x40, byte);
-
-	/* RPR6.2 PCI-bridge upstream dual address window */
-	/* this setting is applicable if the system memory is more than 4GB,and the PCI device can support dual address access */
-	byte = pci_read_config8(dev, 0x50);
-	byte |= 1 << 0;
-	pci_write_config8(dev, 0x50, byte);
-
-	/* RPR 6.3 Enable One-Prefetch-Channel Mode */
-	dword = pci_read_config32(dev, 0x64);
-	dword |= 1 << 20;
-	pci_write_config32(dev, 0x64, dword);
-
-	/* rpr6.4 Adjusting CLKRUN# */
-	dword = pci_read_config32(dev, 0x64);
-	dword |= (1 << 15);
-	pci_write_config32(dev, 0x64, dword);
-}
-
-static struct pci_operations lops_pci = {
-	.set_subsystem = 0,
-};
-
-static struct device_operations pci_ops = {
-	.read_resources = pci_bus_read_resources,
-	.set_resources = pci_dev_set_resources,
-	.enable_resources = pci_bus_enable_resources,
-	.init = pci_init,
-	.scan_bus = pci_scan_bridge,
-	.reset_bus = pci_bus_reset,
-	.ops_pci = &lops_pci,
-};
-
-static const struct pci_driver pci_driver __pci_driver = {
-	.ops = &pci_ops,
-	.vendor = PCI_VENDOR_ID_ATI,
-	.device = PCI_DEVICE_ID_ATI_SB800_PCI,
-};