diff options
Diffstat (limited to 'src/southbridge/amd/sb700')
| -rw-r--r-- | src/southbridge/amd/sb700/Config.lb | 31 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/Kconfig | 22 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/Makefile.inc | 9 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/chip.h | 33 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700.c | 232 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700.h | 52 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_early_setup.c | 610 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_enable_usbdebug_direct.c | 36 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_hda.c | 232 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_ide.c | 83 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_lpc.c | 247 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_pci.c | 128 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_reset.c | 62 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_sata.c | 291 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_sm.c | 381 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_smbus.c | 228 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_smbus.h | 62 | ||||
| -rw-r--r-- | src/southbridge/amd/sb700/sb700_usb.c | 254 |
18 files changed, 2993 insertions, 0 deletions
diff --git a/src/southbridge/amd/sb700/Config.lb b/src/southbridge/amd/sb700/Config.lb new file mode 100644 index 0000000000..77e83889eb --- /dev/null +++ b/src/southbridge/amd/sb700/Config.lb @@ -0,0 +1,31 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +## +## + +config chip.h +driver sb700.o +driver sb700_usb.o +driver sb700_lpc.o +driver sb700_sm.o +driver sb700_ide.o +driver sb700_sata.o +driver sb700_hda.o +driver sb700_pci.o +object sb700_reset.o diff --git a/src/southbridge/amd/sb700/Kconfig b/src/southbridge/amd/sb700/Kconfig new file mode 100644 index 0000000000..db43e5e51d --- /dev/null +++ b/src/southbridge/amd/sb700/Kconfig @@ -0,0 +1,22 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config SOUTHBRIDGE_AMD_SB700 + bool + select IOAPIC diff --git a/src/southbridge/amd/sb700/Makefile.inc b/src/southbridge/amd/sb700/Makefile.inc new file mode 100644 index 0000000000..a70a2cf49d --- /dev/null +++ b/src/southbridge/amd/sb700/Makefile.inc @@ -0,0 +1,9 @@ +driver-y += sb700.o +driver-y += sb700_usb.o +driver-y += sb700_lpc.o +driver-y += sb700_sm.o +driver-y += sb700_ide.o +driver-y += sb700_sata.o +driver-y += sb700_hda.o +driver-y += sb700_pci.o +obj-y += sb700_reset.o diff --git a/src/southbridge/amd/sb700/chip.h b/src/southbridge/amd/sb700/chip.h new file mode 100644 index 0000000000..d4eac3619a --- /dev/null +++ b/src/southbridge/amd/sb700/chip.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SB700_CHIP_H +#define SB700_CHIP_H + +struct southbridge_amd_sb700_config +{ + u32 ide0_enable : 1; + u32 sata0_enable : 1; + u32 boot_switch_sata_ide : 1; + u32 hda_viddid; +}; +struct chip_operations; +extern struct chip_operations southbridge_amd_sb700_ops; + +#endif /* SB700_CHIP_H */ diff --git a/src/southbridge/amd/sb700/sb700.c b/src/southbridge/amd/sb700/sb700.c new file mode 100644 index 0000000000..4bbde6dba2 --- /dev/null +++ b/src/southbridge/amd/sb700/sb700.c @@ -0,0 +1,232 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> + +#include <arch/io.h> + +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "sb700.h" + +static device_t find_sm_dev(device_t dev, u32 devfn) +{ + device_t sm_dev; + + sm_dev = dev_find_slot(dev->bus->secondary, devfn); + if (!sm_dev) + return sm_dev; + + if ((sm_dev->vendor != PCI_VENDOR_ID_ATI) || + ((sm_dev->device != PCI_DEVICE_ID_ATI_SB700_SM))) { + u32 id; + id = pci_read_config32(sm_dev, PCI_VENDOR_ID); + if ((id != + (PCI_VENDOR_ID_ATI | (PCI_DEVICE_ID_ATI_SB700_SM << 16)))) + { + sm_dev = 0; + } + } + + return sm_dev; +} + +void set_sm_enable_bits(device_t sm_dev, u32 reg_pos, u32 mask, u32 val) +{ + u32 reg_old, reg; + reg = reg_old = pci_read_config32(sm_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + pci_write_config32(sm_dev, reg_pos, reg); + } +} + +static void pmio_write_index(u16 port_base, u8 reg, u8 value) +{ + outb(reg, port_base); + outb(value, port_base + 1); +} + +static u8 pmio_read_index(u16 port_base, u8 reg) +{ + outb(reg, port_base); + return inb(port_base + 1); +} + +void pm_iowrite(u8 reg, u8 value) +{ + pmio_write_index(PM_INDEX, reg, value); +} + +u8 pm_ioread(u8 reg) +{ + return pmio_read_index(PM_INDEX, reg); +} + +void pm2_iowrite(u8 reg, u8 value) +{ + pmio_write_index(PM2_INDEX, reg, value); +} + +u8 pm2_ioread(u8 reg) +{ + return pmio_read_index(PM2_INDEX, reg); +} + +static void set_pmio_enable_bits(device_t sm_dev, u32 reg_pos, + u32 mask, u32 val) +{ + u8 reg_old, reg; + reg = reg_old = pm_ioread(reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + pm_iowrite(reg_pos, reg); + } +} + +void sb700_enable(device_t dev) +{ + device_t sm_dev = 0; + device_t bus_dev = 0; + int index = -1; + u32 deviceid; + u32 vendorid; + + /* struct southbridge_ati_sb700_config *conf; */ + /* conf = dev->chip_info; */ + int i; + + u32 devfn; + + printk_debug("sb700_enable()\n"); + +/* +* 0:11.0 SATA bit 8 of sm_dev 0xac : 1 - enable, default + 32 * 3 +* 0:12.0 OHCI0-USB1 bit 0 of sm_dev 0x68 +* 0:12.1 OHCI1-USB1 bit 1 of sm_dev 0x68 +* 0:12.2 EHCI-USB1 bit 2 of sm_dev 0x68 +* 0:13.0 OHCI0-USB2 bit 4 of sm_dev 0x68 +* 0:13.1 OHCI1-USB2 bit 5 of sm_dev 0x68 +* 0:13.2 EHCI-USB2 bit 6 of sm_dev 0x68 +* 0:14.5 OHCI0-USB3 bit 7 of sm_dev 0x68 +* 0:14.0 SMBUS 0 +* 0:14.1 IDE 1 +* 0:14.2 HDA bit 3 of pm_io 0x59 : 1 - enable, default + 32 * 4 +* 0:14.3 LPC bit 20 of sm_dev 0x64 : 0 - disable, default + 32 * 1 +* 0:14.4 PCI 4 +*/ + if (dev->device == 0x0000) { + vendorid = pci_read_config32(dev, PCI_VENDOR_ID); + deviceid = (vendorid >> 16) & 0xffff; + vendorid &= 0xffff; + } else { + vendorid = dev->vendor; + deviceid = dev->device; + } + bus_dev = dev->bus->dev; + if ((bus_dev->vendor == PCI_VENDOR_ID_ATI) && + (bus_dev->device == PCI_DEVICE_ID_ATI_SB700_PCI)) { + devfn = (bus_dev->path.pci.devfn) & ~7; + sm_dev = find_sm_dev(bus_dev, devfn); + if (!sm_dev) + return; + + /* something under 00:01.0 */ + switch (dev->path.pci.devfn) { + case 5 << 3: + ; + } + + return; + } + + i = (dev->path.pci.devfn) & ~7; + i += (2 << 3); + for (devfn = (0x14 << 3); devfn <= i; devfn += (1 << 3)) { + sm_dev = find_sm_dev(dev, devfn); + if (sm_dev) + break; + } + if (!sm_dev) + return; + + switch (dev->path.pci.devfn - (devfn - (0x14 << 3))) { + case (0x11 << 3) | 0: + index = 8; + set_sm_enable_bits(sm_dev, 0xac, 1 << index, + (dev->enabled ? 1 : 0) << index); + index += 32 * 3; + break; + case (0x12 << 3) | 0: + case (0x12 << 3) | 1: + case (0x12 << 3) | 2: + index = dev->path.pci.devfn & 3; + set_sm_enable_bits(sm_dev, 0x68, 1 << index, + (dev->enabled ? 1 : 0) << index); + index += 32 * 2; + break; + case (0x13 << 3) | 0: + case (0x13 << 3) | 1: + case (0x13 << 3) | 2: + index = (dev->path.pci.devfn & 3) + 4; + set_sm_enable_bits(sm_dev, 0x68, 1 << index, + (dev->enabled ? 1 : 0) << index); + index += 32 * 2; + break; + case (0x14 << 3) | 5: + index = 7; + set_sm_enable_bits(sm_dev, 0x68, 1 << index, + (dev->enabled ? 1 : 0) << index); + index += 32 * 2; + break; + case (0x14 << 3) | 0: + index = 0; + break; + case (0x14 << 3) | 1: + index = 1; + break; + case (0x14 << 3) | 2: + index = 3; + set_pmio_enable_bits(sm_dev, 0x59, 1 << index, + (dev->enabled ? 1 : 0) << index); + index += 32 * 4; + break; + case (0x14 << 3) | 3: + index = 20; + set_sm_enable_bits(sm_dev, 0x64, 1 << index, + (dev->enabled ? 1 : 0) << index); + index += 32 * 1; + break; + case (0x14 << 3) | 4: + index = 4; + break; + default: + printk_debug("unknown dev: %s deviceid=%4x\n", dev_path(dev), + deviceid); + } +} + +struct chip_operations southbridge_amd_sb700_ops = { + CHIP_NAME("ATI SB700") + .enable_dev = sb700_enable, +}; diff --git a/src/southbridge/amd/sb700/sb700.h b/src/southbridge/amd/sb700/sb700.h new file mode 100644 index 0000000000..81a358bcb1 --- /dev/null +++ b/src/southbridge/amd/sb700/sb700.h @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SB700_H +#define SB700_H + +#include <device/pci_ids.h> +#include "chip.h" + +/* Power management index/data registers */ +#define PM_INDEX 0xcd6 +#define PM_DATA 0xcd7 +#define PM2_INDEX 0xcd0 +#define PM2_DATA 0xcd1 + +extern void pm_iowrite(u8 reg, u8 value); +extern u8 pm_ioread(u8 reg); +extern void pm2_iowrite(u8 reg, u8 value); +extern u8 pm2_ioread(u8 reg); +extern void set_sm_enable_bits(device_t sm_dev, u32 reg_pos, u32 mask, u32 val); + +#define REV_SB700_A11 0x11 +#define REV_SB700_A12 0x12 +#define REV_SB700_A14 0x14 +#define REV_SB700_A15 0x15 + +/* This shouldn't be called before set_sb700_revision() is called. + * Once set_sb700_revision() is called, we use get_sb700_revision(), + * the simpler one, to get the sb700 revision ID. + * The id is 0x39 if A11, 0x3A if A12, 0x3C if A14, 0x3D if A15. + * The differentiate is 0x28, isn't it? */ +#define get_sb700_revision(sm_dev) (pci_read_config8((sm_dev), 0x08) - 0x28) + +void sb700_enable(device_t dev); + +#endif /* SB700_H */ diff --git a/src/southbridge/amd/sb700/sb700_early_setup.c b/src/southbridge/amd/sb700/sb700_early_setup.c new file mode 100644 index 0000000000..b237ef0f08 --- /dev/null +++ b/src/southbridge/amd/sb700/sb700_early_setup.c @@ -0,0 +1,610 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _SB700_EARLY_SETUP_C_ +#define _SB700_EARLY_SETUP_C_ + +#include <arch/cpu.h> +#include "sb700.h" +#include "sb700_smbus.c" + +#define SMBUS_IO_BASE 0x6000 /* Is it a temporary SMBus I/O base address? */ + /*SIZE 0x40 */ + +static void pmio_write(u8 reg, u8 value) +{ + outb(reg, PM_INDEX); + outb(value, PM_INDEX + 1); +} + +static u8 pmio_read(u8 reg) +{ + outb(reg, PM_INDEX); + return inb(PM_INDEX + 1); +} + +/* RPR 2.28 Get SB ASIC Revision.*/ +static u8 set_sb700_revision(void) +{ + device_t dev; + u8 rev_id, enable_14Mhz, byte; + u8 rev = 0; + + /* if (rev != 0) return rev; */ + + dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); + + if (dev == PCI_DEV_INVALID) { + die("SMBUS controller not found\r\n"); + /* NOT REACHED */ + } + rev_id = pci_read_config8(dev, 0x08); + + if (rev_id == 0x39) { + enable_14Mhz = (pmio_read(0x53) >> 6) & 1; + if (enable_14Mhz == 0x0) + rev = 0x11; /* A11 */ + else if (enable_14Mhz == 0x1) { + /* This happens, if does, only once. So later if we need to get + * the rivision ID, we don't have to make such a big function. + * We just get reg 0x8 in smbus dev. 0x39 is A11, 0x3A is A12. */ + rev = 0x12; + byte = pci_read_config8(dev, 0x40); + byte |= 1 << 0; + pci_write_config8(dev, 0x40, byte); + + pci_write_config8(dev, 0x08, 0x3A); /* Change 0x39 to 0x3A. */ + + byte &= ~(1 << 0); + pci_write_config8(dev, 0x40, byte); + } + } else if (rev_id == 0x3A) { /* A12 will be 0x3A after BIOS is initialized */ + rev = 0x12; + } else if (rev_id == 0x3C) { + rev = 0x14; + } else if (rev_id == 0x3D) { + rev = 0x15; + } else + die("It is not SB700 or SB710\r\n"); + + return rev; +} + +/*************************************** +* Legacy devices are mapped to LPC space. +* Serial port 0 +* KBC Port +* ACPI Micro-controller port +* LPC ROM size +* This function does not change port 0x80 decoding. +* Console output through any port besides 0x3f8 is unsupported. +* If you use FWH ROMs, you have to setup IDSEL. +***************************************/ +static void sb700_lpc_init(void) +{ + u8 reg8; + u32 reg32; + device_t dev; + + /* NOTE: Set BootTimerDisable, otherwise it would keep rebooting!! */ + dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); /* SMBUS controller */ + reg32 = pci_read_config32(dev, 0x4C); + reg32 |= 1 << 31; + pci_write_config32(dev, 0x4C, reg32); + + /* Enable lpc controller */ + reg32 = pci_read_config32(dev, 0x64); + reg32 |= 1 << 20; + pci_write_config32(dev, 0x64, reg32); + + dev = pci_locate_device(PCI_ID(0x1002, 0x439d), 0); /* LPC Controller */ + /* Decode port 0x3f8-0x3ff (Serial 0) */ +#warning Serial port decode on LPC is hardcoded to 0x3f8 + reg8 = pci_read_config8(dev, 0x44); + reg8 |= 1 << 6; + pci_write_config8(dev, 0x44, reg8); + + /* Decode port 0x60 & 0x64 (PS/2 keyboard) and port 0x62 & 0x66 (ACPI)*/ + reg8 = pci_read_config8(dev, 0x47); + reg8 |= (1 << 5) | (1 << 6); + pci_write_config8(dev, 0x47, reg8); + + /* SuperIO, LPC ROM */ + reg8 = pci_read_config8(dev, 0x48); + /* Decode ports 0x2e-0x2f, 0x4e-0x4f (SuperI/O configuration) */ + reg8 |= (1 << 1) | (1 << 0); + /* Decode variable LPC ROM address ranges 1&2 (see register 0x68-0x6b, 0x6c-0x6f) */ + reg8 |= (1 << 3) | (1 << 4); + /* Decode port 0x70-0x73 (RTC) */ + reg8 |= 1 << 6; + pci_write_config8(dev, 0x48, reg8); + + /* hardware should enable LPC ROM by pin straps */ + /* ROM access at 0xFFF80000/0xFFF00000 - 0xFFFFFFFF */ + /* See detail in 43366_sb700_bdg_nda_1.01.pdf page 17. */ + /* enable LPC ROM range mirroring start 0x000e(0000) */ + pci_write_config16(dev, 0x68, 0x000e); + /* enable LPC ROM range mirroring end 0x000f(ffff) */ + pci_write_config16(dev, 0x6a, 0x000f); + /* enable LPC ROM range start, 0xfff8(0000): 512KB, 0xfff0(0000): 1MB */ + pci_write_config16(dev, 0x6c, 0xfff0); + /* enable LPC ROM range end at 0xffff(ffff) */ + pci_write_config16(dev, 0x6e, 0xffff); +} + +/* what is its usage? */ +static u32 get_sbdn(u32 bus) +{ + device_t dev; + + /* Find the device. */ + dev = pci_locate_device_on_bus(PCI_ID(0x1002, 0x4385), bus); + return (dev >> 15) & 0x1f; +} + +static u8 dual_core(void) +{ + return (pci_read_config32(PCI_DEV(0, 0x18, 3), 0xE8) & (0x3<<12)) != 0; +} + +/* + * RPR 2.4 C-state and VID/FID change for the K8 platform. + */ +static void enable_fid_change_on_sb(u32 sbbusn, u32 sbdn) +{ + u8 byte; + byte = pmio_read(0x9a); + byte &= ~0x34; + if (dual_core()) + byte |= 0x34; + else + byte |= 0x04; + pmio_write(0x9a, byte); + + byte = pmio_read(0x8f); + byte &= ~0x30; + byte |= 0x20; + pmio_write(0x8f, byte); + + pmio_write(0x8b, 0x01); /* TODO: if the HT Link is 200 MHz, it is 0x0A. It doesnt often happen. */ + pmio_write(0x8a, 0x90); + + pmio_write(0x88, 0x10); + + byte = pmio_read(0x7c); + byte |= 0x03; + pmio_write(0x7c, byte); + + /*Must be 0 for K8 platform.*/ + byte = pmio_read(0x68); + byte &= ~0x01; + pmio_write(0x68, byte); + /*Must be 0 for K8 platform.*/ + byte = pmio_read(0x8d); + byte &= ~(1<<6); + pmio_write(0x8d, byte); + + byte = pmio_read(0x61); + byte &= ~0x04; + pmio_write(0x61, byte); + + byte = pmio_read(0x42); + byte &= ~0x04; + pmio_write(0x42, byte); + + pmio_write(0x89, 0x10); +} + +static void hard_reset(void) +{ + set_bios_reset(); + + /* full reset */ + outb(0x0a, 0x0cf9); + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); + /* link reset */ + outb(0x06, 0x0cf9); +} + +static void sb700_pci_port80(void) +{ + u8 byte; + device_t dev; + + /* P2P Bridge */ + dev = pci_locate_device(PCI_ID(0x1002, 0x4384), 0); + + /* Chip Control: Enable subtractive decoding */ + byte = pci_read_config8(dev, 0x40); + byte |= 1 << 5; + pci_write_config8(dev, 0x40, byte); + + /* Misc Control: Enable subtractive decoding if 0x40 bit 5 is set */ + byte = pci_read_config8(dev, 0x4B); + byte |= 1 << 7; + pci_write_config8(dev, 0x4B, byte); + + /* The same IO Base and IO Limit here is meaningful because we set the + * bridge to be subtractive. During early setup stage, we have to make + * sure that data can go through port 0x80. + */ + /* IO Base: 0xf000 */ + byte = pci_read_config8(dev, 0x1C); + byte |= 0xF << 4; + pci_write_config8(dev, 0x1C, byte); + + /* IO Limit: 0xf000 */ + byte = pci_read_config8(dev, 0x1D); + byte |= 0xF << 4; + pci_write_config8(dev, 0x1D, byte); + + /* PCI Command: Enable IO response */ + byte = pci_read_config8(dev, 0x04); + byte |= 1 << 0; + pci_write_config8(dev, 0x04, byte); + + /* LPC controller */ + dev = pci_locate_device(PCI_ID(0x1002, 0x439D), 0); + + byte = pci_read_config8(dev, 0x4A); + byte &= ~(1 << 5); /* disable lpc port 80 */ + pci_write_config8(dev, 0x4A, byte); +} + +static void sb700_lpc_port80(void) +{ + u8 byte; + device_t dev; + u32 reg32; + + /* Enable LPC controller */ + dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); + reg32 = pci_read_config32(dev, 0x64); + reg32 |= 0x00100000; /* lpcEnable */ + pci_write_config32(dev, 0x64, reg32); + + /* Enable port 80 LPC decode in pci function 3 configuration space. */ + dev = pci_locate_device(PCI_ID(0x1002, 0x439d), 0); + byte = pci_read_config8(dev, 0x4a); + byte |= 1 << 5; /* enable port 80 */ + pci_write_config8(dev, 0x4a, byte); +} + +/* sbDevicesPorInitTable */ +static void sb700_devices_por_init(void) +{ + device_t dev; + u8 byte; + + printk_info("sb700_devices_por_init()\n"); + /* SMBus Device, BDF:0-20-0 */ + printk_info("sb700_devices_por_init(): SMBus Device, BDF:0-20-0\n"); + dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); + + if (dev == PCI_DEV_INVALID) { + die("SMBUS controller not found\r\n"); + /* NOT REACHED */ + } + printk_info("SMBus controller enabled, sb revision is A%x\r\n", + set_sb700_revision()); + + /* sbPorAtStartOfTblCfg */ + /* Set A-Link bridge access address. This address is set at device 14h, function 0, register 0xf0. + * This is an I/O address. The I/O address must be on 16-byte boundry. */ + pci_write_config32(dev, 0xf0, AB_INDX); + + /* To enable AB/BIF DMA access, a specific register inside the BIF register space needs to be configured first. */ + /* 4.3:Enables the SB700 to send transactions upstream over A-Link Express interface. */ + axcfg_reg(0x04, 1 << 2, 1 << 2); + axindxc_reg(0x21, 0xff, 0); + + /* 2.5:Enabling Non-Posted Memory Write for the K8 Platform */ + axindxc_reg(0x10, 1 << 9, 1 << 9); + /* END of sbPorAtStartOfTblCfg */ + + /* sbDevicesPorInitTables */ + /* set smbus iobase */ + pci_write_config32(dev, 0x90, SMBUS_IO_BASE | 1); + + /* enable smbus controller interface */ + byte = pci_read_config8(dev, 0xd2); + byte |= (1 << 0); + pci_write_config8(dev, 0xd2, byte); + + /* KB2RstEnable */ + pci_write_config8(dev, 0x40, 0x44); + + /* Enable ISA Address 0-960K decoding */ + pci_write_config8(dev, 0x48, 0x0f); + + /* Enable ISA Address 0xC0000-0xDFFFF decode */ + pci_write_config8(dev, 0x49, 0xff); + + /* Enable decode cycles to IO C50, C51, C52 GPM controls. */ + byte = pci_read_config8(dev, 0x41); + byte &= 0x80; + byte |= 0x33; + pci_write_config8(dev, 0x41, byte); + + /* Legacy DMA Prefetch Enhancement, CIM masked it. */ + /* pci_write_config8(dev, 0x43, 0x1); */ + + /* Disabling Legacy USB Fast SMI# */ + byte = pci_read_config8(dev, 0x62); + byte |= 0x24; + pci_write_config8(dev, 0x62, byte); + + /* Features Enable */ + pci_write_config32(dev, 0x64, 0x829E79BF); /* bit10: Enables the HPET interrupt. */ + + /* SerialIrq Control */ + pci_write_config8(dev, 0x69, 0x90); + + /* Test Mode, PCIB_SReset_En Mask is set. */ + pci_write_config8(dev, 0x6c, 0x20); + + /* IO Address Enable, CIM set 0x78 only and masked 0x79. */ + /*pci_write_config8(dev, 0x79, 0x4F); */ + pci_write_config8(dev, 0x78, 0xFF); + + /* Set smbus iospace enable, I don't know why write 0x04 into reg5 that is reserved */ + pci_write_config16(dev, 0x4, 0x0407); + + /* clear any lingering errors, so the transaction will run */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); + + /* IDE Device, BDF:0-20-1 */ + printk_info("sb700_devices_por_init(): IDE Device, BDF:0-20-1\n"); + dev = pci_locate_device(PCI_ID(0x1002, 0x439C), 0); + /* Disable prefetch */ + byte = pci_read_config8(dev, 0x63); + byte |= 0x1; + pci_write_config8(dev, 0x63, byte); + + /* LPC Device, BDF:0-20-3 */ + printk_info("sb700_devices_por_init(): LPC Device, BDF:0-20-3\n"); + dev = pci_locate_device(PCI_ID(0x1002, 0x439D), 0); + /* DMA enable */ + pci_write_config8(dev, 0x40, 0x04); + + /* IO Port Decode Enable */ + pci_write_config8(dev, 0x44, 0xFF); + pci_write_config8(dev, 0x45, 0xFF); + pci_write_config8(dev, 0x46, 0xC3); + pci_write_config8(dev, 0x47, 0xFF); + + /* IO/Mem Port Decode Enable, I don't know why CIM disable some ports. + * Disable LPC TimeOut counter, enable SuperIO Configuration Port (2e/2f), + * Alternate SuperIO Configuration Port (4e/4f), Wide Generic IO Port (64/65). + * Enable bits for LPC ROM memory address range 1&2 for 1M ROM setting.*/ + byte = pci_read_config8(dev, 0x48); + byte |= (1 << 1) | (1 << 0); /* enable Super IO config port 2e-2h, 4e-4f */ + byte |= (1 << 3) | (1 << 4); /* enable for LPC ROM address range1&2, Enable 512KB rom access at 0xFFF80000 - 0xFFFFFFFF */ + byte |= 1 << 6; /* enable for RTC I/O range */ + pci_write_config8(dev, 0x48, byte); + pci_write_config8(dev, 0x49, 0xFF); + /* Enable 0x480-0x4bf, 0x4700-0x470B */ + byte = pci_read_config8(dev, 0x4A); + byte |= ((1 << 1) + (1 << 6)); /*0x42, save the configuraion for port 0x80. */ + pci_write_config8(dev, 0x4A, byte); + + /* Set LPC ROM size, it has been done in sb700_lpc_init(). + * enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB; + * enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB + * pci_write_config16(dev, 0x68, 0x000e) + * pci_write_config16(dev, 0x6c, 0xfff0);*/ + + /* Enable Tpm12_en and Tpm_legacy. I don't know what is its usage and copied from CIM. */ + pci_write_config8(dev, 0x7C, 0x05); + + /* P2P Bridge, BDF:0-20-4, the configuration of the registers in this dev are copied from CIM, + */ + printk_info("sb700_devices_por_init(): P2P Bridge, BDF:0-20-4\n"); + dev = pci_locate_device(PCI_ID(0x1002, 0x4384), 0); + + /* Arbiter enable. */ + pci_write_config8(dev, 0x43, 0xff); + + /* Set PCDMA request into hight priority list. */ + /* pci_write_config8(dev, 0x49, 0x1) */ ; + + pci_write_config8(dev, 0x40, 0x26); + + pci_write_config8(dev, 0x0d, 0x40); + pci_write_config8(dev, 0x1b, 0x40); + /* Enable PCIB_DUAL_EN_UP will fix potential problem with PCI cards. */ + pci_write_config8(dev, 0x50, 0x01); + + /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */ + printk_info("sb700_devices_por_init(): SATA Device, BDF:0-18-0\n"); + dev = pci_locate_device(PCI_ID(0x1002, 0x4390), 0); + + /*PHY Global Control*/ + pci_write_config16(dev, 0x86, 0x2C00); +} + +/* sbPmioPorInitTable, Pre-initializing PMIO register space +* The power management (PM) block is resident in the PCI/LPC/ISA bridge. +* The PM regs are accessed via IO mapped regs 0xcd6 and 0xcd7. +* The index address is first programmed into IO reg 0xcd6. +* Read or write values are accessed through IO reg 0xcd7. +*/ +static void sb700_pmio_por_init(void) +{ + u8 byte; + + printk_info("sb700_pmio_por_init()\n"); + /* K8KbRstEn, KB_RST# control for K8 system. */ + byte = pmio_read(0x66); + byte |= 0x20; + pmio_write(0x66, byte); + + /* RPR2.31 PM_TURN_OFF_MSG during ASF Shutdown. */ + if (get_sb700_revision(pci_locate_device(PCI_ID(0x1002, 0x4385), 0)) <= 0x12) { + byte = pmio_read(0x65); + byte &= ~(1 << 7); + pmio_write(0x65, byte); + + byte = pmio_read(0x75); + byte &= 0xc0; + byte |= 0x05; + pmio_write(0x75, byte); + + byte = pmio_read(0x52); + byte &= 0xc0; + byte |= 0x08; + pmio_write(0x52, byte); + } else { + byte = pmio_read(0xD7); + byte |= 1 << 0; + pmio_write(0xD7, byte); + + byte = pmio_read(0x65); + byte |= 1 << 7; + pmio_write(0x65, byte); + + byte = pmio_read(0x75); + byte &= 0xc0; + byte |= 0x01; + pmio_write(0x75, byte); + + byte = pmio_read(0x52); + byte &= 0xc0; + byte |= 0x02; + pmio_write(0x52, byte); + + } + + /* Watch Dog Timer Control + * Set watchdog time base to 0xfec000f0 to avoid SCSI card boot failure. + * But I don't find WDT is enabled in SMBUS 0x41 bit3 in CIM. + */ + pmio_write(0x6c, 0xf0); + pmio_write(0x6d, 0x00); + pmio_write(0x6e, 0xc0); + pmio_write(0x6f, 0xfe); + + /* rpr2.15: Enabling Spread Spectrum */ + byte = pmio_read(0x42); + byte |= 1 << 7; + pmio_write(0x42, byte); + /* TODO: Check if it is necessary. IDE reset */ + byte = pmio_read(0xB2); + byte |= 1 << 0; + pmio_write(0xB2, byte); +} + +/* +* Add any south bridge setting. +*/ +static void sb700_pci_cfg(void) +{ + device_t dev; + u8 byte; + + /* SMBus Device, BDF:0-20-0 */ + dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); + /* Enable watchdog decode timer */ + byte = pci_read_config8(dev, 0x41); + byte |= (1 << 3); + pci_write_config8(dev, 0x41, byte); + + /* Set to 1 to reset USB on the software (such as IO-64 or IO-CF9 cycles) + * generated PCIRST#. */ + byte = pmio_read(0x65); + byte |= (1 << 4); + pmio_write(0x65, byte); + + /* IDE Device, BDF:0-20-1 */ + dev = pci_locate_device(PCI_ID(0x1002, 0x439C), 0); + /* Enable IDE Explicit prefetch, 0x63[0] clear */ + byte = pci_read_config8(dev, 0x63); + byte &= 0xfe; + pci_write_config8(dev, 0x63, byte); + + /* LPC Device, BDF:0-20-3 */ + /* The code below is ported from old chipset. It is not + * metioned in RPR. But I keep them. The registers and the + * comments are compatible. */ + dev = pci_locate_device(PCI_ID(0x1002, 0x439D), 0); + /* Enabling LPC DMA function. */ + byte = pci_read_config8(dev, 0x40); + byte |= (1 << 2); + pci_write_config8(dev, 0x40, byte); + /* Disabling LPC TimeOut. 0x48[7] clear. */ + byte = pci_read_config8(dev, 0x48); + byte &= 0x7f; + pci_write_config8(dev, 0x48, byte); + /* Disabling LPC MSI Capability, 0x78[1] clear. */ + byte = pci_read_config8(dev, 0x78); + byte &= 0xfd; + pci_write_config8(dev, 0x78, byte); + + /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */ + dev = pci_locate_device(PCI_ID(0x1002, 0x4390), 0); + /* rpr7.12 SATA MSI and D3 Power State Capability. */ + byte = pci_read_config8(dev, 0x40); + byte |= 1 << 0; + pci_write_config8(dev, 0x40, byte); + if (get_sb700_revision(pci_locate_device(PCI_ID(0x1002, 0x4385), 0)) <= 0x12) + pci_write_config8(dev, 0x34, 0x70); /* set 0x61 to 0x70 if S1 is not supported. */ + else + pci_write_config8(dev, 0x34, 0x50); /* set 0x61 to 0x50 if S1 is not supported. */ + byte &= ~(1 << 0); + pci_write_config8(dev, 0x40, byte); +} + +/* +*/ +static void sb700_por_init(void) +{ + /* sbDevicesPorInitTable + sbK8PorInitTable */ + sb700_devices_por_init(); + + /* sbPmioPorInitTable + sbK8PmioPorInitTable */ + sb700_pmio_por_init(); +} + +/* +* It should be called during early POST after memory detection and BIOS shadowing but before PCI bus enumeration. +*/ +static void sb700_before_pci_init(void) +{ + sb700_pci_cfg(); +} + +/* +* This function should be called after enable_sb700_smbus(). +*/ +static void sb700_early_setup(void) +{ + printk_info("sb700_early_setup()\n"); + sb700_por_init(); +} + +static int smbus_read_byte(u32 device, u32 address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} +#endif diff --git a/src/southbridge/amd/sb700/sb700_enable_usbdebug_direct.c b/src/southbridge/amd/sb700/sb700_enable_usbdebug_direct.c new file mode 100644 index 0000000000..b739fe2b5a --- /dev/null +++ b/src/southbridge/amd/sb700/sb700_enable_usbdebug_direct.c @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SB700_DEVN_BASE + +#define SB700_DEVN_BASE 0 + +#endif + +#define EHCI_BAR_INDEX 0x10 +#define EHCI_BAR 0xFEF00000 +#define EHCI_DEBUG_OFFSET 0xE0 + +static void sb700_enable_usbdebug_direct(u32 port) +{ + set_debug_port(port); + pci_write_config32(PCI_DEV(0, SB700_DEVN_BASE + 0x13, 5), + EHCI_BAR_INDEX, EHCI_BAR); + pci_write_config8(PCI_DEV(0, SB700_DEVN_BASE + 0x13, 5), 0x04, 0x2); /* mem space enabe */ +} diff --git a/src/southbridge/amd/sb700/sb700_hda.c b/src/southbridge/amd/sb700/sb700_hda.c new file mode 100644 index 0000000000..edff6022dc --- /dev/null +++ b/src/southbridge/amd/sb700/sb700_hda.c @@ -0,0 +1,232 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <arch/io.h> +#include <delay.h> +#include "sb700.h" + +#define HDA_ICII_REG 0x68 +#define HDA_ICII_BUSY (1 << 0) +#define HDA_ICII_VALID (1 << 1) + +static int set_bits(u8 * port, u32 mask, u32 val) +{ + u32 dword; + int count; + + /* Write (val & ~mask) to port */ + val &= mask; + dword = read32(port); + dword &= ~mask; + dword |= val; + write32(port, dword); + + /* Wait for readback of register to + * match what was just written to it + */ + count = 50; + do { + /* Wait 1ms based on BKDG wait time */ + mdelay(1); + dword = read32(port); + dword &= mask; + } while ((dword != val) && --count); + + /* Timeout occured */ + if (!count) + return -1; + return 0; +} + +static u32 codec_detect(u8 * base) +{ + u32 dword; + + /* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */ + if (set_bits(base + 0x08, 1, 0) == -1) + goto no_codec; + + /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ + if (set_bits(base + 0x08, 1, 1) == -1) + goto no_codec; + + /* Delay for 1 ms since the BKDG does */ + mdelay(1); + + /* Read in Codec location (BAR + 0xe)[3..0]*/ + dword = read32(base + 0xe); + dword &= 0x0F; + if (!dword) + goto no_codec; + + return dword; + +no_codec: + /* Codec Not found */ + /* Put HDA back in reset (BAR + 0x8) [0] */ + set_bits(base + 0x08, 1, 0); + printk_debug("No codec!\n"); + return 0; +} + +/** + * Wait 50usec for for the codec to indicate it is ready + * no response would imply that the codec is non-operative + */ +static int wait_for_ready(u8 *base) +{ + /* Use a 50 usec timeout - the Linux kernel uses the + * same duration */ + + int timeout = 50; + + while(timeout--) { + u32 dword=read32(base + HDA_ICII_REG); + if (!(dword & HDA_ICII_BUSY)) + return 0; + udelay(1); + } + + return -1; +} + +/** + * Wait 50usec for for the codec to indicate that it accepted + * the previous command. No response would imply that the code + * is non-operative + */ +static int wait_for_valid(u8 *base) +{ + /* Use a 50 usec timeout - the Linux kernel uses the + * same duration */ + + int timeout = 50; + while(timeout--) { + u32 dword = read32(base + HDA_ICII_REG); + if ((dword & (HDA_ICII_VALID | HDA_ICII_BUSY)) == + HDA_ICII_VALID) + return 0; + udelay(1); + } + + return 1; +} + +static void codec_init(u8 * base, int addr) +{ + u32 dword; + + /* 1 */ + if (wait_for_ready(base) == -1) + return; + + dword = (addr << 28) | 0x000f0000; + write32(base + 0x60, dword); + + if (wait_for_valid(base) == -1) + return; + + dword = read32(base + 0x64); + + /* 2 */ + printk_debug("%x(th) codec viddid: %08x\n", addr, dword); +} + +static void codecs_init(u8 * base, u32 codec_mask) +{ + int i; + for (i = 2; i >= 0; i--) { + if (codec_mask & (1 << i)) + codec_init(base, i); + } +} + +static void hda_init(struct device *dev) +{ + u8 byte; + u32 dword; + u8 *base; + struct resource *res; + u32 codec_mask; + device_t sm_dev; + + /* Enable azalia - PM_io 0x59[3], no ac97 in sb700. */ + byte = pm_ioread(0x59); + byte |= 1 << 3; + pm_iowrite(0x59, byte); + + /* Find the SMBus */ + /* FIXME: Need to find out why the call below crashes. */ + /*sm_dev = dev_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_ATI_SB700_SM, 0);*/ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + /* Set routing pin - SMBus ExtFunc (0xf8/0xfc) */ + pci_write_config32(sm_dev, 0xf8, 0x00); + pci_write_config8(sm_dev, 0xfc, 0xAA); + /* Set INTA - SMBus 0x63 [2..0] */ + byte = pci_read_config8(sm_dev, 0x63); + byte &= ~0x7; + byte |= 0x0; /* INTA:0x0 - INTH:0x7 */ + pci_write_config8(sm_dev, 0x63, byte); + + /* Program the 2C to 0x437b1002 */ + dword = 0x437b1002; + pci_write_config32(dev, 0x2c, dword); + + /* Read in BAR */ + /* Is this right? HDA allows for a 64-bit BAR + * but this is only setup for a 32-bit one + */ + res = find_resource(dev, 0x10); + if (!res) + return; + + base = (u8 *) ((u32)res->base); + printk_debug("base = %p\n", base); + codec_mask = codec_detect(base); + + if (codec_mask) { + printk_debug("codec_mask = %02x\n", codec_mask); + codecs_init(base, codec_mask); + } +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static struct device_operations hda_audio_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = hda_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static struct pci_driver hdaaudio_driver __pci_driver = { + .ops = &hda_audio_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_HDA, +}; diff --git a/src/southbridge/amd/sb700/sb700_ide.c b/src/southbridge/amd/sb700/sb700_ide.c new file mode 100644 index 0000000000..39bd48cfb3 --- /dev/null +++ b/src/southbridge/amd/sb700/sb700_ide.c @@ -0,0 +1,83 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "sb700.h" + +static void ide_init(struct device *dev) +{ + struct southbridge_amd_sb700_config *conf; + /* Enable ide devices so the linux ide driver will work */ + u32 dword; + u8 byte; + + conf = dev->chip_info; + + /* RPR9.1 disable MSI */ + /* TODO: For A14, it should set as 1. I doubt it. */ + dword = pci_read_config32(dev, 0x70); + dword &= ~(1 << 16); + pci_write_config32(dev, 0x70, dword); + + /* Ultra DMA mode */ + /* enable UDMA */ + byte = pci_read_config8(dev, 0x54); + byte |= 1 << 0; + pci_write_config8(dev, 0x54, byte); + + /* Enable I/O Access&& Bus Master */ + dword = pci_read_config16(dev, 0x4); + dword |= 1 << 2; + pci_write_config16(dev, 0x4, dword); + + /* set ide as primary, if you want to boot from IDE, you'd better set it + * in mainboard/Config.lb */ + if (conf->boot_switch_sata_ide == 1) { + byte = pci_read_config8(dev, 0xAD); + byte |= 1 << 4; + pci_write_config8(dev, 0xAD, byte); + } + +#if CONFIG_PCI_ROM_RUN == 1 + pci_dev_init(dev); +#endif +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static struct device_operations ide_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = ide_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static struct pci_driver ide_driver __pci_driver = { + .ops = &ide_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_IDE, +}; diff --git a/src/southbridge/amd/sb700/sb700_lpc.c b/src/southbridge/amd/sb700/sb700_lpc.c new file mode 100644 index 0000000000..63560404da --- /dev/null +++ b/src/southbridge/amd/sb700/sb700_lpc.c @@ -0,0 +1,247 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pnp.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <pc80/mc146818rtc.h> +#include <pc80/isa-dma.h> +#include <bitops.h> +#include <arch/io.h> +#include "sb700.h" + +static void lpc_init(device_t dev) +{ + u8 byte; + u32 dword; + device_t sm_dev; + + /* Enable the LPC Controller */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + dword = pci_read_config32(sm_dev, 0x64); + dword |= 1 << 20; + pci_write_config32(sm_dev, 0x64, dword); + + /* Initialize isa dma */ + isa_dma_init(); + + /* Enable DMA transaction on the LPC bus */ + byte = pci_read_config8(dev, 0x40); + byte |= (1 << 2); + pci_write_config8(dev, 0x40, byte); + + /* Disable the timeout mechanism on LPC */ + byte = pci_read_config8(dev, 0x48); + byte &= ~(1 << 7); + pci_write_config8(dev, 0x48, byte); + + /* Disable LPC MSI Capability */ + byte = pci_read_config8(dev, 0x78); + byte &= ~(1 << 1); + pci_write_config8(dev, 0x78, byte); + +} + +static void sb700_lpc_read_resources(device_t dev) +{ + struct resource *res; + + /* Get the normal pci resources of this device */ + pci_dev_read_resources(dev); /* We got one for APIC, or one more for TRAP */ + + pci_get_resource(dev, 0xA0); /* SPI ROM base address */ + + /* Add an extra subtractive resource for both memory and I/O. */ + res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); + res->base = 0; + res->size = 0x1000; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); + res->base = 0xff800000; + res->size = 0x00800000; /* 8 MB for flash */ + res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, 3); /* IOAPIC */ + res->base = 0xfec00000; + res->size = 0x00001000; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + compact_resources(dev); +} + +static void sb700_lpc_set_resources(struct device *dev) +{ + struct resource *res; + u8 byte; + + pci_dev_set_resources(dev); + + /* Specical case. SPI Base Address. The SpiRomEnable should be set. */ + res = find_resource(dev, 0xA0); + pci_write_config32(dev, 0xA0, res->base | 1 << 1); + +} + +/** + * @brief Enable resources for children devices + * + * @param dev the device whos children's resources are to be enabled + * + * This function is call by the global enable_resources() indirectly via the + * device_operation::enable_resources() method of devices. + * + * Indirect mutual recursion: + * enable_childrens_resources() -> enable_resources() + * enable_resources() -> device_operation::enable_resources() + * device_operation::enable_resources() -> enable_children_resources() + */ +static void sb700_lpc_enable_childrens_resources(device_t dev) +{ + u32 link; + u32 reg, reg_x; + int i; + int var_num = 0; + u16 reg_var[3]; + + reg = pci_read_config32(dev, 0x44); + reg_x = pci_read_config32(dev, 0x48); + + for (link = 0; link < dev->links; link++) { + device_t child; + for (child = dev->link[link].children; child; + child = child->sibling) { + enable_resources(child); + if (child->enabled + && (child->path.type == DEVICE_PATH_PNP)) { + for (i = 0; i < child->resources; i++) { + struct resource *res; + u32 base, end; /* don't need long long */ + res = &child->resource[i]; + if (!(res->flags & IORESOURCE_IO)) + continue; + base = res->base; + end = resource_end(res); + printk_debug + ("sb700 lpc decode:%s, base=0x%08x, end=0x%08x\n", + dev_path(child), base, end); + switch (base) { + case 0x60: /* KB */ + case 0x64: /* MS */ + reg |= (1 << 29); + break; + case 0x3f8: /* COM1 */ + reg |= (1 << 6); + break; + case 0x2f8: /* COM2 */ + reg |= (1 << 7); + break; + case 0x378: /* Parallal 1 */ + reg |= (1 << 0); + break; + case 0x3f0: /* FD0 */ + reg |= (1 << 26); + break; + case 0x220: /* Aduio 0 */ + reg |= (1 << 8); + break; + case 0x300: /* Midi 0 */ + reg |= (1 << 18); + break; + case 0x400: + reg_x |= (1 << 16); + break; + case 0x480: + reg_x |= (1 << 17); + break; + case 0x500: + reg_x |= (1 << 18); + break; + case 0x580: + reg_x |= (1 << 19); + break; + case 0x4700: + reg_x |= (1 << 22); + break; + case 0xfd60: + reg_x |= (1 << 23); + break; + default: + if (var_num >= 3) + continue; /* only 3 var ; compact them ? */ + switch (var_num) { + case 0: + reg_x |= (1 << 2); + break; + case 1: + reg_x |= (1 << 24); + break; + case 2: + reg_x |= (1 << 25); + break; + } + reg_var[var_num++] = + base & 0xffff; + } + } + } + } + } + pci_write_config32(dev, 0x44, reg); + pci_write_config32(dev, 0x48, reg_x); + /* Set WideIO for as many IOs found (fall through is on purpose) */ + switch (var_num) { + case 2: + pci_write_config16(dev, 0x90, reg_var[2]); + case 1: + pci_write_config16(dev, 0x66, reg_var[1]); + case 0: + pci_write_config16(dev, 0x64, reg_var[0]); + break; + } +} + +static void sb700_lpc_enable_resources(device_t dev) +{ + pci_dev_enable_resources(dev); + sb700_lpc_enable_childrens_resources(dev); +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static struct device_operations lpc_ops = { + .read_resources = sb700_lpc_read_resources, + .set_resources = sb700_lpc_set_resources, + .enable_resources = sb700_lpc_enable_resources, + .init = lpc_init, + .scan_bus = scan_static_bus, + .ops_pci = &lops_pci, +}; +static struct pci_driver lpc_driver __pci_driver = { + .ops = &lpc_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_LPC, +}; diff --git a/src/southbridge/amd/sb700/sb700_pci.c b/src/southbridge/amd/sb700/sb700_pci.c new file mode 100644 index 0000000000..0c1300c5e4 --- /dev/null +++ b/src/southbridge/amd/sb700/sb700_pci.c @@ -0,0 +1,128 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "sb700.h" + +static void pci_init(struct device *dev) +{ + u32 dword; + u16 word; + u8 byte; + + /* RPR 5.1 Enables the PCI-bridge subtractive decode */ + /* This setting is strongly recommended since it supports some legacy PCI add-on cards,such as BIOS debug cards */ + byte = pci_read_config8(dev, 0x4B); + byte |= 1 << 7; + pci_write_config8(dev, 0x4B, byte); + byte = pci_read_config8(dev, 0x40); + byte |= 1 << 5; + pci_write_config8(dev, 0x40, byte); + + /* RPR5.2 PCI-bridge upstream dual address window */ + /* this setting is applicable if the system memory is more than 4GB,and the PCI device can support dual address access */ + byte = pci_read_config8(dev, 0x50); + byte |= 1 << 0; + pci_write_config8(dev, 0x50, byte); + + /* RPR 5.3 PCI bus 64-byte DMA read access */ + /* Enhance the PCI bus DMA performance */ + byte = pci_read_config8(dev, 0x4B); + byte |= 1 << 4; + pci_write_config8(dev, 0x4B, byte); + + /* RPR 5.4 Enables the PCIB writes to be cacheline aligned. */ + /* The size of the writes will be set in the Cacheline Register */ + byte = pci_read_config8(dev, 0x40); + byte |= 1 << 1; + pci_write_config8(dev, 0x40, byte); + + /* RPR 5.5 Enables the PCIB to retain ownership of the bus on the Primary side and on the Secondary side when GNT# is deasserted */ + pci_write_config8(dev, 0x0D, 0x40); + pci_write_config8(dev, 0x1B, 0x40); + + /* RPR 5.6 Enable the command matching checking function on "Memory Read" & "Memory Read Line" commands */ + byte = pci_read_config8(dev, 0x4B); + byte |= 1 << 6; + pci_write_config8(dev, 0x4B, byte); + + /* RPR 5.7 When enabled, the PCI arbiter checks for the Bus Idle before asserting GNT# */ + byte = pci_read_config8(dev, 0x4B); + byte |= 1 << 0; + pci_write_config8(dev, 0x4B, byte); + + /* RPR 5.8 Adjusts the GNT# de-assertion time */ + word = pci_read_config16(dev, 0x64); + word |= 1 << 12; + pci_write_config16(dev, 0x64, word); + + /* RPR 5.9 Fast Back to Back transactions support */ + byte = pci_read_config8(dev, 0x48); + byte |= 1 << 2; + /* pci_write_config8(dev, 0x48, byte); */ + + /* RPR 5.10 Enable Lock Operation */ + /* byte = pci_read_config8(dev, 0x48); */ + byte |= 1 << 3; + pci_write_config8(dev, 0x48, byte); + + /* RPR 5.11 Enable additional optional PCI clock */ + word = pci_read_config16(dev, 0x64); + word |= 1 << 8; + pci_write_config16(dev, 0x64, word); + + /* RPR 5.12 Enable One-Prefetch-Channel Mode */ + dword = pci_read_config32(dev, 0x64); + dword |= 1 << 20; + pci_write_config32(dev, 0x64, dword); + + /* RPR 5.13 Disable PCIB MSI Capability */ + byte = pci_read_config8(dev, 0x40); + byte &= ~(1 << 3); + pci_write_config8(dev, 0x40, byte); + + /* rpr5.14 Adjusting CLKRUN# */ + dword = pci_read_config32(dev, 0x64); + dword |= (1 << 15); + pci_write_config32(dev, 0x64, dword); +} + +static struct pci_operations lops_pci = { + .set_subsystem = 0, +}; + +static struct device_operations pci_ops = { + .read_resources = pci_bus_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_bus_enable_resources, + .init = pci_init, + .scan_bus = pci_scan_bridge, + .reset_bus = pci_bus_reset, + .ops_pci = &lops_pci, +}; + +static struct pci_driver pci_driver __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_PCI, +}; diff --git a/src/southbridge/amd/sb700/sb700_reset.c b/src/southbridge/amd/sb700/sb700_reset.c new file mode 100644 index 0000000000..44af1d8bd4 --- /dev/null +++ b/src/southbridge/amd/sb700/sb700_reset.c @@ -0,0 +1,62 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> + +#define PCI_DEV(BUS, DEV, FN) ( \ + (((BUS) & 0xFFF) << 20) | \ + (((DEV) & 0x1F) << 15) | \ + (((FN) & 0x7) << 12)) + +typedef u32 device_t; + +static void pci_write_config8(device_t dev, unsigned where, unsigned char value) +{ + unsigned addr; + addr = (dev>>4) | where; + outl(0x80000000 | (addr & ~3), 0xCF8); + outb(value, 0xCFC + (addr & 3)); +} + +static void pci_write_config32(device_t dev, unsigned where, unsigned value) +{ + unsigned addr; + addr = (dev>>4) | where; + outl(0x80000000 | (addr & ~3), 0xCF8); + outl(value, 0xCFC); +} + +static unsigned pci_read_config32(device_t dev, unsigned where) +{ + unsigned addr; + addr = (dev>>4) | where; + outl(0x80000000 | (addr & ~3), 0xCF8); + return inl(0xCFC); +} + +#include "../../../northbridge/amd/amdk8/reset_test.c" + +void hard_reset(void) +{ + set_bios_reset(); + /* Try rebooting through port 0xcf9 */ + /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */ + outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9); + outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9); +} diff --git a/src/southbridge/amd/sb700/sb700_sata.c b/src/southbridge/amd/sb700/sb700_sata.c new file mode 100644 index 0000000000..6e9c49696b --- /dev/null +++ b/src/southbridge/amd/sb700/sb700_sata.c @@ -0,0 +1,291 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <delay.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <arch/io.h> +#include "sb700.h" + +int sata_drive_detect(int portnum, u16 iobar) +{ + u8 byte, byte2; + int i = 0; + outb(0xA0 + 0x10 * (portnum % 2), iobar + 0x6); + while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7), + (byte != (0xA0 + 0x10 * (portnum % 2))) || + ((byte2 & 0x88) != 0)) { + printk_spew("0x6=%x, 0x7=%x\n", byte, byte2); + if (byte != (0xA0 + 0x10 * (portnum % 2))) { + /* This will happen at the first iteration of this loop + * if the first SATA port is unpopulated and the + * second SATA port is poulated. + */ + printk_debug("drive no longer selected after %i ms, " + "retrying init\n", i * 10); + return 1; + } else + printk_spew("drive detection not yet completed, " + "waiting...\n"); + mdelay(10); + i++; + } + printk_spew("drive detection done after %i ms\n", i * 10); + return 0; +} + +static void sata_init(struct device *dev) +{ + u8 byte; + u16 word; + u32 dword; + u8 rev_id; + u8 *sata_bar5; + u16 sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4; + int i, j; + + struct southbridge_ati_sb700_config *conf; + conf = dev->chip_info; + + device_t sm_dev; + /* SATA SMBus Disable */ + /* sm_dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + /* Disable SATA SMBUS */ + byte = pci_read_config8(sm_dev, 0xad); + byte |= (1 << 1); + /* Enable SATA and power saving */ + byte = pci_read_config8(sm_dev, 0xad); + byte |= (1 << 0); + byte |= (1 << 5); + pci_write_config8(sm_dev, 0xad, byte); + + /* RPR 7.2 SATA Initialization */ + /* Set the interrupt Mapping to INTG# */ + byte = pci_read_config8(sm_dev, 0xaf); + byte = 0x6 << 2; + pci_write_config8(sm_dev, 0xaf, byte); + + /* get rev_id */ + rev_id = pci_read_config8(sm_dev, 0x08) - 0x28; + + /* get base addresss */ + sata_bar5 = (u8 *) (pci_read_config32(dev, 0x24) & ~0x3FF); + sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7; + sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3; + sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7; + sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x3; + sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf; + + printk_spew("sata_bar0=%x\n", sata_bar0); /* 3030 */ + printk_spew("sata_bar1=%x\n", sata_bar1); /* 3070 */ + printk_spew("sata_bar2=%x\n", sata_bar2); /* 3040 */ + printk_spew("sata_bar3=%x\n", sata_bar3); /* 3080 */ + printk_spew("sata_bar4=%x\n", sata_bar4); /* 3000 */ + printk_spew("sata_bar5=%p\n", sata_bar5); /* e0309000 */ + + /* disable combined mode */ + byte = pci_read_config8(sm_dev, 0xAD); + byte &= ~(1 << 3); + pci_write_config8(sm_dev, 0xAD, byte); + /* Program the 2C to 0x43801002 */ + dword = 0x43801002; + pci_write_config32(dev, 0x2c, dword); + + /* SERR-Enable */ + word = pci_read_config16(dev, 0x04); + word |= (1 << 8); + pci_write_config16(dev, 0x04, word); + + /* Dynamic power saving */ + byte = pci_read_config8(dev, 0x40); + byte |= (1 << 2); + pci_write_config8(dev, 0x40, byte); + + /* Set SATA Operation Mode, Set to IDE mode */ + byte = pci_read_config8(dev, 0x40); + byte |= (1 << 0); + byte |= (1 << 4); + pci_write_config8(dev, 0x40, byte); + + dword = 0x01018f00; + pci_write_config32(dev, 0x8, dword); + + byte = pci_read_config8(dev, 0x40); + byte &= ~(1 << 0); + pci_write_config8(dev, 0x40, byte); + + /* Enable the SATA watchdog counter */ + byte = pci_read_config8(dev, 0x44); + byte |= (1 << 0); + pci_write_config8(dev, 0x44, byte); + + /* Set bit 29 and 24 for A12 */ + dword = pci_read_config32(dev, 0x40); + if (rev_id < 0x14) /* before A12 */ + dword |= (1 << 29); + else + dword &= ~(1 << 29); /* A14 and above */ + pci_write_config32(dev, 0x40, dword); + + /* set bit 21 for A12 */ + dword = pci_read_config32(dev, 0x48); + if (rev_id < 0x14) /* before A12 */ + dword |= 1 << 24 | 1 << 21; + else { + dword &= ~(1 << 24 | 1 << 21); /* A14 and above */ + dword &= ~0xFF80; /* 15:7 */ + dword |= 1 << 15 | 0x7F << 7; + } + pci_write_config32(dev, 0x48, dword); + + /* Program the watchdog counter to 0x10 */ + byte = 0x10; + pci_write_config8(dev, 0x46, byte); + + /* RPR7.6.1 Program the PHY Global Control to 0x2C00 */ + word = 0x2c00; + pci_write_config16(dev, 0x86, word); + + /* RPR7.6.2 SATA GENI PHY ports setting */ + pci_write_config32(dev, 0x88, 0x01B48017); + pci_write_config32(dev, 0x8c, 0x01B48019); + pci_write_config32(dev, 0x90, 0x01B48016); + pci_write_config32(dev, 0x94, 0x01B48016); + pci_write_config32(dev, 0x98, 0x01B48016); + pci_write_config32(dev, 0x9C, 0x01B48016); + + /* RPR7.6.3 SATA GEN II PHY port setting for port [0~5]. */ + pci_write_config16(dev, 0xA0, 0xA09A); + pci_write_config16(dev, 0xA2, 0xA09F); + pci_write_config16(dev, 0xA4, 0xA07A); + pci_write_config16(dev, 0xA6, 0xA07A); + pci_write_config16(dev, 0xA8, 0xA07A); + pci_write_config16(dev, 0xAA, 0xA07A); + + /* Enable the I/O, MM, BusMaster access for SATA */ + byte = pci_read_config8(dev, 0x4); + byte |= 7 << 0; + pci_write_config8(dev, 0x4, byte); + + /* RPR7.7 SATA drive detection. */ + /* Use BAR5+0x128,BAR0 for Primary Slave */ + /* Use BAR5+0x1A8,BAR0 for Primary Slave */ + /* Use BAR5+0x228,BAR2 for Secondary Master */ + /* Use BAR5+0x2A8,BAR2 for Secondary Slave */ + /* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary master emulation */ + /* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */ + + /* TODO: port 4,5, which are PATA emulations. What are PATA_BARs? */ + + for (i = 0; i < 4; i++) { + byte = read8(sata_bar5 + 0x128 + 0x80 * i); + printk_spew("SATA port %i status = %x\n", i, byte); + byte &= 0xF; + if( byte == 0x1 ) { + /* If the drive status is 0x1 then we see it but we aren't talking to it. */ + /* Try to do something about it. */ + printk_spew("SATA device detected but not talking. Trying lower speed.\n"); + + /* Read in Port-N Serial ATA Control Register */ + byte = read8(sata_bar5 + 0x12C + 0x80 * i); + + /* Set Reset Bit and 1.5g bit */ + byte |= 0x11; + write8((sata_bar5 + 0x12C + 0x80 * i), byte); + + /* Wait 1ms */ + mdelay(1); + + /* Clear Reset Bit */ + byte &= ~0x01; + write8((sata_bar5 + 0x12C + 0x80 * i), byte); + + /* Wait 1ms */ + mdelay(1); + + /* Reread status */ + byte = read8(sata_bar5 + 0x128 + 0x80 * i); + printk_spew("SATA port %i status = %x\n", i, byte); + byte &= 0xF; + } + + if (byte == 0x3) { + for (j = 0; j < 10; j++) { + if (!sata_drive_detect(i, ((i / 2) == 0) ? sata_bar0 : sata_bar2)) + break; + } + printk_debug("%s %s device is %sready after %i tries\n", + (i / 2) ? "Secondary" : "Primary", + (i % 2 ) ? "Slave" : "Master", + (j == 10) ? "not " : "", + (j == 10) ? j : j + 1); + } else { + printk_debug("No %s %s SATA drive on Slot%i\n", + (i / 2) ? "Secondary" : "Primary", + (i % 2 ) ? "Slave" : "Master", i); + } + } + + /* Below is CIM InitSataLateFar */ + /* Enable interrupts from the HBA */ + byte = read8(sata_bar5 + 0x4); + byte |= 1 << 1; + write8((sata_bar5 + 0x4), byte); + + /* Clear error status */ + write32((sata_bar5 + 0x130), 0xFFFFFFFF); + write32((sata_bar5 + 0x1b0), 0xFFFFFFFF); + write32((sata_bar5 + 0x230), 0xFFFFFFFF); + write32((sata_bar5 + 0x2b0), 0xFFFFFFFF); + write32((sata_bar5 + 0x330), 0xFFFFFFFF); + write32((sata_bar5 + 0x3b0), 0xFFFFFFFF); + + /* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */ + /* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */ + + /* word = 0x0000; */ + /* word = pm_ioread(0x28); */ + /* byte = pm_ioread(0x29); */ + /* word |= byte<<8; */ + /* printk_debug("AcpiGpe0Blk addr = %x\n", word); */ + /* write32(word, 0x80000000); */ +} + +static struct pci_operations lops_pci = { + /* .set_subsystem = pci_dev_set_subsystem, */ +}; + +static struct device_operations sata_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = sata_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static struct pci_driver sata0_driver __pci_driver = { + .ops = &sata_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_SATA, +}; diff --git a/src/southbridge/amd/sb700/sb700_sm.c b/src/southbridge/amd/sb700/sb700_sm.c new file mode 100644 index 0000000000..27891dee19 --- /dev/null +++ b/src/southbridge/amd/sb700/sb700_sm.c @@ -0,0 +1,381 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <device/smbus.h> +#include <pc80/mc146818rtc.h> +#include <bitops.h> +#include <arch/io.h> +#include <cpu/x86/lapic.h> +#include <arch/ioapic.h> +#include <stdlib.h> +#include "sb700.h" +#include "sb700_smbus.c" + +#define NMI_OFF 0 + +#define MAINBOARD_POWER_OFF 0 +#define MAINBOARD_POWER_ON 1 + +#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL +#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON +#endif + +/* +* SB700 enables all USB controllers by default in SMBUS Control. +* SB700 enables SATA by default in SMBUS Control. +*/ +static void sm_init(device_t dev) +{ + u8 byte; + u8 byte_old; + u32 dword; + u32 ioapic_base; + u32 on; + u32 nmi_option; + + printk_info("sm_init().\n"); + + ioapic_base = pci_read_config32(dev, 0x74) & (0xffffffe0); /* some like mem resource, but does not have enable bit */ + /* Don't rename APIC ID */ + /* TODO: We should call setup_ioapic() here. But kernel hangs if cpu is K8. + * We need to check out why and change back. */ + clear_ioapic(ioapic_base); + + /* 2.10 Interrupt Routing/Filtering */ + dword = pci_read_config8(dev, 0x62); + dword |= 3; + pci_write_config8(dev, 0x62, dword); + + /* Delay back to back interrupts to the CPU. */ + dword = pci_read_config16(dev, 0x64); + dword |= 1 << 13; + pci_write_config16(dev, 0x64, dword); + + + /* rrg:K8 INTR Enable (BIOS should set this bit after PIC initialization) */ + /* rpr 2.1 Enabling Legacy Interrupt */ + dword = pci_read_config8(dev, 0x62); + dword |= 1 << 2; + pci_write_config8(dev, 0x62, dword); + + dword = pci_read_config32(dev, 0x78); + dword |= 1 << 9; + pci_write_config32(dev, 0x78, dword); /* enable 0xCD6 0xCD7 */ + + /* bit 10: MultiMediaTimerIrqEn */ + dword = pci_read_config8(dev, 0x64); + dword |= 1 << 10; + pci_write_config8(dev, 0x64, dword); + /* enable serial irq */ + byte = pci_read_config8(dev, 0x69); + byte |= 1 << 7; /* enable serial irq function */ + byte &= ~(0xF << 2); + byte |= 4 << 2; /* set NumSerIrqBits=4 */ + pci_write_config8(dev, 0x69, byte); + + /* IRQ0From8254 */ + byte = pci_read_config8(dev, 0x41); + byte &= ~(1 << 7); + pci_write_config8(dev, 0x41, byte); + + byte = pm_ioread(0x61); + byte |= 1 << 1; /* Set to enable NB/SB handshake during IOAPIC interrupt for AMD K8/K7 */ + pm_iowrite(0x61, byte); + + /* disable SMI */ + byte = pm_ioread(0x53); + byte |= 1 << 3; + pm_iowrite(0x53, byte); + + /* power after power fail */ + on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; + get_option(&on, "power_on_after_fail"); + byte = pm_ioread(0x74); + byte &= ~0x03; + if (on) { + byte |= 2; + } + byte |= 1 << 2; + pm_iowrite(0x74, byte); + printk_info("set power %s after power fail\n", on ? "on" : "off"); + + byte = pm_ioread(0x68); + byte &= ~(1 << 1); + /* 2.7 */ + byte |= 1 << 2; + pm_iowrite(0x68, byte); + + /* 2.7 */ + byte = pm_ioread(0x65); + byte &= ~(1 << 7); + pm_iowrite(0x65, byte); + + /* 2.16 */ + byte = pm_ioread(0x55); + byte |= 1 << 5; + pm_iowrite(0x55, byte); + + byte = pm_ioread(0xD7); + byte |= 1 << 6 | 1 << 1;; + pm_iowrite(0xD7, byte); + + /* 2.15 */ + byte = pm_ioread(0x42); + byte &= ~(1 << 2); + pm_iowrite(0x42, byte); + + /* Set up NMI on errors */ + byte = inb(0x70); /* RTC70 */ + byte_old = byte; + nmi_option = NMI_OFF; + get_option(&nmi_option, "nmi"); + if (nmi_option) { + byte &= ~(1 << 7); /* set NMI */ + printk_info("++++++++++set NMI+++++\n"); + } else { + byte |= (1 << 7); /* Can not mask NMI from PCI-E and NMI_NOW */ + printk_info("++++++++++no set NMI+++++\n"); + } + byte &= ~(1 << 7); + if (byte != byte_old) { + outb(byte, 0x70); + } + + /* 2.11 IO Trap Settings */ + abcfg_reg(0x10090, 1 << 16, 1 << 16); + + /* ab index */ + pci_write_config32(dev, 0xF0, AB_INDX); + /* Initialize the real time clock */ + rtc_init(0); + + /* 4.3 Enabling Upstream DMA Access */ + axcfg_reg(0x04, 1 << 2, 1 << 2); + /* 4.4 Enabling IDE/PCIB Prefetch for Performance Enhancement */ + abcfg_reg(0x10060, 9 << 17, 9 << 17); + abcfg_reg(0x10064, 9 << 17, 9 << 17); + + /* 4.5 Enabling OHCI Prefetch for Performance Enhancement, A12 */ + abcfg_reg(0x80, 1 << 0, 1<< 0); + + /* 4.6 B-Link Client's Credit Variable Settings for the Downstream Arbitration Equation */ + /* 4.7 Enabling Additional Address Bits Checking in Downstream */ + /* 4.15 IO write and SMI ordering enhancement*/ + abcfg_reg(0x9c, 3 << 0 | 1 << 8, 3 << 0 | 1 << 8); + + /* 4.8 Set B-Link Prefetch Mode */ + abcfg_reg(0x80, 3 << 17, 3 << 17); + + /* 4.9 Enabling Detection of Upstream Interrupts */ + abcfg_reg(0x94, 1 << 20 | 0x7FFFF, 1 << 20 | 0x00FEE); + + /* 4.10: Enabling Downstream Posted Transactions to Pass Non-Posted + * Transactions for the K8 Platform (for All Revisions) */ + abcfg_reg(0x10090, 1 << 8, 1 << 8); + + /* 4.11:Programming Cycle Delay for AB and BIF Clock Gating */ + /* 4.12: Enabling AB and BIF Clock Gating */ + abcfg_reg(0x10054, 0xFFFF0000, 0x1040000); + abcfg_reg(0x54, 0xFF << 16, 4 << 16); + abcfg_reg(0x54, 1 << 24, 0 << 24); + abcfg_reg(0x98, 0x0000FF00, 0x00004700); + + /* 4.13:Enabling AB Int_Arbiter Enhancement (for All Revisions) */ + abcfg_reg(0x10054, 0x0000FFFF, 0x07FF); + + /* 4.14:Enabling Requester ID for upstream traffic. */ + abcfg_reg(0x98, 1 << 16, 1 << 16); + + /* 9.2: Enableing IDE Data Bus DD7 Pull Down Resistor */ + byte = pm2_ioread(0xE5); + byte |= 1 << 2; + pm2_iowrite(0xE5, byte); + + /* Enable IDE controller. */ + byte = pm_ioread(0x59); + byte &= ~(1 << 1); + pm_iowrite(0x59, byte); + + printk_info("sm_init() end\n"); + + /* Enable NbSb virtual channel */ + axcfg_reg(0x114, 0x3f << 1, 0 << 1); + axcfg_reg(0x120, 0x7f << 1, 0x7f << 1); + axcfg_reg(0x120, 7 << 24, 1 << 24); + axcfg_reg(0x120, 1 << 31, 1 << 31); + abcfg_reg(0x50, 1 << 3, 1 << 3); +} + +static int lsmbus_recv_byte(device_t dev) +{ + u32 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + + res = find_resource(pbus->dev, 0x90); + + return do_smbus_recv_byte(res->base, device); +} + +static int lsmbus_send_byte(device_t dev, u8 val) +{ + u32 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + + res = find_resource(pbus->dev, 0x90); + + return do_smbus_send_byte(res->base, device, val); +} + +static int lsmbus_read_byte(device_t dev, u8 address) +{ + u32 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + + res = find_resource(pbus->dev, 0x90); + + return do_smbus_read_byte(res->base, device, address); +} + +static int lsmbus_write_byte(device_t dev, u8 address, u8 val) +{ + u32 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + + res = find_resource(pbus->dev, 0x90); + + return do_smbus_write_byte(res->base, device, address, val); +} +static struct smbus_bus_operations lops_smbus_bus = { + .recv_byte = lsmbus_recv_byte, + .send_byte = lsmbus_send_byte, + .read_byte = lsmbus_read_byte, + .write_byte = lsmbus_write_byte, +}; + +static void sb700_sm_read_resources(device_t dev) +{ + struct resource *res; + u8 byte; + + /* rpr2.14: Hides SM bus controller Bar1 where stores HPET MMIO base address */ + byte = pm_ioread(0x55); + byte |= 1 << 7; + pm_iowrite(0x55, byte); + + /* Get the normal pci resources of this device */ + /* pci_dev_read_resources(dev); */ + + byte = pm_ioread(0x55); + byte &= ~(1 << 7); + pm_iowrite(0x55, byte); + + /* apic */ + res = new_resource(dev, 0x74); + res->base = 0xfec00000; + res->size = 256 * 0x10; + res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */ + res->align = 8; + res->gran = 8; + res->flags = IORESOURCE_MEM | IORESOURCE_FIXED; + + #if 0 /* Linux ACPI crashes when it is 1. For late debugging. */ + res = new_resource(dev, 0x14); /* TODO: hpet */ + res->base = 0xfed00000; /* reset hpet to widely accepted address */ + res->size = 0x400; + res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */ + res->align = 8; + res->gran = 8; + res->flags = IORESOURCE_MEM | IORESOURCE_FIXED; + #endif + /* dev->command |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; */ + + /* smbus */ + res = new_resource(dev, 0x90); + res->base = 0xB00; + res->size = 0x10; + res->limit = 0xFFFFUL; /* res->base + res->size -1; */ + res->align = 8; + res->gran = 8; + res->flags = IORESOURCE_IO | IORESOURCE_FIXED; + + + compact_resources(dev); + +} +static void sb700_sm_set_resources(struct device *dev) +{ + struct resource *res; + u8 byte; + + pci_dev_set_resources(dev); + + + /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */ + byte = pm_ioread(0x52); + byte |= 1 << 6; + pm_iowrite(0x52, byte); + + res = find_resource(dev, 0x74); + pci_write_config32(dev, 0x74, res->base | 1 << 3); +#if 0 /* TODO:hpet */ + res = find_resource(dev, 0x14); + pci_write_config32(dev, 0x14, res->base); +#endif + res = find_resource(dev, 0x90); + pci_write_config32(dev, 0x90, res->base | 1); +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; +static struct device_operations smbus_ops = { + .read_resources = sb700_sm_read_resources, + .set_resources = sb700_sm_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = sm_init, + .scan_bus = scan_static_bus, + .ops_pci = &lops_pci, + .ops_smbus_bus = &lops_smbus_bus, +}; +static struct pci_driver smbus_driver __pci_driver = { + .ops = &smbus_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_SM, +}; diff --git a/src/southbridge/amd/sb700/sb700_smbus.c b/src/southbridge/amd/sb700/sb700_smbus.c new file mode 100644 index 0000000000..91bbea852d --- /dev/null +++ b/src/southbridge/amd/sb700/sb700_smbus.c @@ -0,0 +1,228 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _SB700_SMBUS_C_ +#define _SB700_SMBUS_C_ + +#include "sb700_smbus.h" + +static inline void smbus_delay(void) +{ + outb(inb(0x80), 0x80); +} + +static int smbus_wait_until_ready(u32 smbus_io_base) +{ + u32 loops; + loops = SMBUS_TIMEOUT; + do { + u8 val; + val = inb(smbus_io_base + SMBHSTSTAT); + val &= 0x1f; + if (val == 0) { /* ready now */ + return 0; + } + outb(val, smbus_io_base + SMBHSTSTAT); + } while (--loops); + return -2; /* time out */ +} + +static int smbus_wait_until_done(u32 smbus_io_base) +{ + u32 loops; + loops = SMBUS_TIMEOUT; + do { + u8 val; + + val = inb(smbus_io_base + SMBHSTSTAT); + val &= 0x1f; /* mask off reserved bits */ + if (val & 0x1c) { + return -5; /* error */ + } + if (val == 0x02) { + outb(val, smbus_io_base + SMBHSTSTAT); /* clear status */ + return 0; + } + } while (--loops); + return -3; /* timeout */ +} + +static int do_smbus_recv_byte(u32 smbus_io_base, u32 device) +{ + u8 byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; /* not ready */ + } + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; /* Clear [4:2] */ + byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */ + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; /* timeout or error */ + } + + /* read results of transaction */ + byte = inb(smbus_io_base + SMBHSTCMD); + + return byte; +} + +static int do_smbus_send_byte(u32 smbus_io_base, u32 device, + u8 val) +{ + u8 byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; /* not ready */ + } + + /* set the command... */ + outb(val, smbus_io_base + SMBHSTCMD); + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; /* Clear [4:2] */ + byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */ + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; /* timeout or error */ + } + + return 0; +} + +int do_smbus_read_byte(u32 smbus_io_base, u32 device, + u32 address) +{ + u8 byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; /* not ready */ + } + + /* set the command/address... */ + outb(address & 0xff, smbus_io_base + SMBHSTCMD); + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; /* Clear [4:2] */ + byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */ + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; /* timeout or error */ + } + + /* read results of transaction */ + byte = inb(smbus_io_base + SMBHSTDAT0); + + return byte; +} + +int do_smbus_write_byte(u32 smbus_io_base, u32 device, + u32 address, u8 val) +{ + u8 byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; /* not ready */ + } + + /* set the command/address... */ + outb(address & 0xff, smbus_io_base + SMBHSTCMD); + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR); + + /* output value */ + outb(val, smbus_io_base + SMBHSTDAT0); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; /* Clear [4:2] */ + byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */ + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; /* timeout or error */ + } + + return 0; +} + +static void alink_ab_indx(u32 reg_space, u32 reg_addr, + u32 mask, u32 val) +{ + u32 tmp; + + outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); + tmp = inl(AB_DATA); + /* rpr 4.2 + * For certain revisions of the chip, the ABCFG registers, + * with an address of 0x100NN (where 'N' is any hexadecimal + * number), require an extra programming step.*/ + reg_addr & 0x10000 ? outl(0, AB_INDX) : NULL; + + tmp &= ~mask; + tmp |= val; + + /* printk_debug("about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */ + outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); /* probably we dont have to do it again. */ + outl(tmp, AB_DATA); + reg_addr & 0x10000 ? outl(0, AB_INDX) : NULL; +} + +/* space = 0: AX_INDXC, AX_DATAC + * space = 1: AX_INDXP, AX_DATAP + */ +static void alink_ax_indx(u32 space /*c or p? */ , u32 axindc, + u32 mask, u32 val) +{ + u32 tmp; + + /* read axindc to tmp */ + outl(space << 30 | space << 3 | 0x30, AB_INDX); + outl(axindc, AB_DATA); + outl(space << 30 | space << 3 | 0x34, AB_INDX); + tmp = inl(AB_DATA); + + tmp &= ~mask; + tmp |= val; + + /* write tmp */ + outl(space << 30 | space << 3 | 0x30, AB_INDX); + outl(axindc, AB_DATA); + outl(space << 30 | space << 3 | 0x34, AB_INDX); + outl(tmp, AB_DATA); +} +#endif diff --git a/src/southbridge/amd/sb700/sb700_smbus.h b/src/southbridge/amd/sb700/sb700_smbus.h new file mode 100644 index 0000000000..8452bbd9d6 --- /dev/null +++ b/src/southbridge/amd/sb700/sb700_smbus.h @@ -0,0 +1,62 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SB700_SMBUS_H +#define SB700_SMBUS_H + +//#include <stdint.h> + +#define SMBHSTSTAT 0x0 +#define SMBSLVSTAT 0x1 +#define SMBHSTCTRL 0x2 +#define SMBHSTCMD 0x3 +#define SMBHSTADDR 0x4 +#define SMBHSTDAT0 0x5 +#define SMBHSTDAT1 0x6 +#define SMBHSTBLKDAT 0x7 + +#define SMBSLVCTRL 0x8 +#define SMBSLVCMD_SHADOW 0x9 +#define SMBSLVEVT 0xa +#define SMBSLVDAT 0xc + +#define AX_INDXC 0 +#define AX_INDXP 1 +#define AXCFG 2 +#define ABCFG 3 + +#define AB_INDX 0xCD8 +#define AB_DATA (AB_INDX+4) + +/* Between 1-10 seconds, We should never timeout normally + * Longer than this is just painful when a timeout condition occurs. + */ +#define SMBUS_TIMEOUT (100*1000*10) + +#define abcfg_reg(reg, mask, val) \ + alink_ab_indx((ABCFG), (reg), (mask), (val)) +#define axcfg_reg(reg, mask, val) \ + alink_ab_indx((AXCFG), (reg), (mask), (val)) +#define axindxc_reg(reg, mask, val) \ + alink_ax_indx(0, (reg), (mask), (val)) +#define axindxp_reg(reg, mask, val) \ + alink_ax_indx(1, (reg), (mask), (val)) + + +#endif diff --git a/src/southbridge/amd/sb700/sb700_usb.c b/src/southbridge/amd/sb700/sb700_usb.c new file mode 100644 index 0000000000..d9e0dc0bcd --- /dev/null +++ b/src/southbridge/amd/sb700/sb700_usb.c @@ -0,0 +1,254 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <usbdebug_direct.h> +#include <arch/io.h> +#include "sb700.h" + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static void usb_init(struct device *dev) +{ + u8 byte; + u16 word; + u32 dword; + + /* 6.1 Enable OHCI0-4 and EHCI Controllers */ + device_t sm_dev; + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + byte = pci_read_config8(sm_dev, 0x68); + byte |= 0xFF; + pci_write_config8(sm_dev, 0x68, byte); + + + /* RPR 6.2 Enables the USB PME Event,Enable USB resume support */ + byte = pm_ioread(0x61); + byte |= 1 << 6; + pm_iowrite(0x61, byte); + byte = pm_ioread(0x65); + byte |= 1 << 2; + pm_iowrite(0x65, byte); + + /* RPR 6.3 Support USB device wakeup from the S4/S5 state */ + byte = pm_ioread(0x65); + byte &= ~(1 << 0); + pm_iowrite(0x65, byte); + + /* RPR 6.5 Enable the USB controller to get reset by any software that generate a PCIRst# condition */ + byte = pm_ioread(0x65); + byte |= (1 << 4); + pm_iowrite(0x65, byte); + + /* RPR 6.10 Disable OHCI MSI Capability. */ + word = pci_read_config16(dev, 0x40); + word |= (0x3 << 8); + pci_write_config16(dev, 0x40, word); +} + +static void usb_init2(struct device *dev) +{ + u8 byte; + u16 word; + u32 dword; + u8 *usb2_bar0; + device_t sm_dev; + u8 rev; + + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + rev = get_sb700_revision(sm_dev); + + /* dword = pci_read_config32(dev, 0xf8); */ + /* dword |= 40; */ + /* pci_write_config32(dev, 0xf8, dword); */ + + usb2_bar0 = (u8 *) (pci_read_config32(dev, 0x10) & ~0xFF); + printk_info("usb2_bar0=%p\n", usb2_bar0); + + /* RPR6.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */ + dword = 0x00020F00; + write32(usb2_bar0 + 0xC0, dword); + + /* RPR6.9 Sets In/OUT FIFO threshold for best performance */ + dword = 0x00400040; + write32(usb2_bar0 + 0xA4, dword); + + /* RPR6.11 Disabling EHCI Advance Asynchronous Enhancement */ + dword = pci_read_config32(dev, 0x50); + dword |= (1 << 28); + pci_write_config32(dev, 0x50, dword); + + /* RPR 6.12 EHCI Advance PHY Power Savings */ + /* RPR says it is just for A12. CIMM sets it when it is above A11. */ + /* But it makes the linux crash, so we skip it */ + #if 0 + dword = pci_read_config32(dev, 0x50); + dword |= 1 << 31; + pci_write_config32(dev, 0x50, dword); + #endif + + /* RPR6.13 Enabling Fix for EHCI Controller Dirver Yellow Sign Issue */ + /* RPR says it is just for A12. CIMM sets it when it is above A11. */ + dword = pci_read_config32(dev, 0x50); + dword |= (1 << 20); + pci_write_config32(dev, 0x50, dword); + + /* RPR6.15 EHCI Async Park Mode */ + dword = pci_read_config32(dev, 0x50); + dword |= (1 << 23); + pci_write_config32(dev, 0x50, dword); + + /* Each step below causes the linux crashes. Leave them here + * for future debugging. */ +#if 0 + /* RPR6.16 Disable EHCI MSI support */ + byte = pci_read_config8(dev, 0x50); + byte |= (1 << 6); + pci_write_config8(dev, 0x50, byte); + + /* RPR6.17 Disable the EHCI Dynamic Power Saving feature */ + word = read32(usb2_bar0 + 0xBC); + word &= ~(1 << 12); + write16(usb2_bar0 + 0xBC, word); + + /* RPR6.19 USB Controller DMA Read Delay Tolerant. */ + if (rev >= REV_SB700_A14) { + byte = pci_read_config8(dev, 0x50); + byte |= (1 << 7); + pci_write_config8(dev, 0x50, byte); + } + + /* RPR6.20 Async Park Mode. */ + /* RPR recommends not to set these bits. */ + #if 0 + dword = pci_read_config32(dev, 0x50); + dword |= 1 << 23; + if (rev >= REV_SB700_A14) { + dword &= ~(1 << 2); + } + pci_write_config32(dev, 0x50, dword); + #endif + + /* RPR6.22 Advance Async Enhancement */ + /* RPR6.23 USB Periodic Cache Setting */ + dword = pci_read_config32(dev, 0x50); + if (rev == REV_SB700_A12) { + dword |= 1 << 28; /* 6.22 */ + dword |= 1 << 27; /* 6.23 */ + } else if (rev >= REV_SB700_A14) { + dword |= 1 << 3; + dword &= ~(1 << 28); /* 6.22 */ + dword |= 1 << 8; + dword &= ~(1 << 27); /* 6.23 */ + } + printk_debug("rpr 6.23, final dword=%x\n", dword); +#endif +} + +static void usb_set_resources(struct device *dev) +{ +#if CONFIG_USBDEBUG_DIRECT + struct resource *res; + u32 base; + u32 old_debug; + + old_debug = get_ehci_debug(); + set_ehci_debug(0); +#endif + pci_dev_set_resources(dev); + +#if CONFIG_USBDEBUG_DIRECT + res = find_resource(dev, 0x10); + set_ehci_debug(old_debug); + if (!res) + return; + base = res->base; + set_ehci_base(base); + report_resource_stored(dev, res, ""); +#endif + +} + +static struct device_operations usb_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = usb_set_resources, /* pci_dev_set_resources, */ + .enable_resources = pci_dev_enable_resources, + .init = usb_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static struct pci_driver usb_0_driver __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_USB_18_0, +}; +static struct pci_driver usb_1_driver __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_USB_18_1, +}; + +/* the pci id of usb ctrl 0 and 1 are the same. */ +/* + * static struct pci_driver usb_3_driver __pci_driver = { + * .ops = &usb_ops, + * .vendor = PCI_VENDOR_ID_ATI, + * .device = PCI_DEVICE_ID_ATI_SB700_USB_19_0, + * }; + * static struct pci_driver usb_4_driver __pci_driver = { + * .ops = &usb_ops, + * .vendor = PCI_VENDOR_ID_ATI, + * .device = PCI_DEVICE_ID_ATI_SB700_USB_19_1, + * }; + */ + +static struct pci_driver usb_4_driver __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_USB_20_5, +}; + +static struct device_operations usb_ops2 = { + .read_resources = pci_dev_read_resources, + .set_resources = usb_set_resources, /* pci_dev_set_resources, */ + .enable_resources = pci_dev_enable_resources, + .init = usb_init2, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static struct pci_driver usb_5_driver __pci_driver = { + .ops = &usb_ops2, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_USB_18_2, +}; +/* + * static struct pci_driver usb_5_driver __pci_driver = { + * .ops = &usb_ops2, + * .vendor = PCI_VENDOR_ID_ATI, + * .device = PCI_DEVICE_ID_ATI_SB700_USB_19_2, + * }; + */ |