diff options
Diffstat (limited to 'src/southbridge/amd/sb700/usb.c')
| -rw-r--r-- | src/southbridge/amd/sb700/usb.c | 257 |
1 files changed, 0 insertions, 257 deletions
diff --git a/src/southbridge/amd/sb700/usb.c b/src/southbridge/amd/sb700/usb.c deleted file mode 100644 index 4109e88cc3..0000000000 --- a/src/southbridge/amd/sb700/usb.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <device/pci_ehci.h> -#include <device/mmio.h> -#include <option.h> -#include <types.h> - -#include "sb700.h" - -static struct pci_operations lops_pci = { - .set_subsystem = pci_dev_set_subsystem, -}; - -static void usb_init(struct device *dev) -{ - u8 byte; - u16 word; - u32 dword; - - /* 6.1 Enable OHCI0-4 and EHCI Controllers */ - struct device *sm_dev; - sm_dev = pcidev_on_root(0x14, 0); - byte = pci_read_config8(sm_dev, 0x68); - byte |= 0xFF; - pci_write_config8(sm_dev, 0x68, byte); - - /* RPR 6.2 Enables the USB PME Event,Enable USB resume support */ - byte = pm_ioread(0x61); - byte |= 1 << 6; - pm_iowrite(0x61, byte); - byte = pm_ioread(0x65); - byte |= 1 << 2; - pm_iowrite(0x65, byte); - - /* RPR 6.3 Support USB device wakeup from the S4/S5 state */ - byte = pm_ioread(0x65); - byte &= ~(1 << 0); - pm_iowrite(0x65, byte); - - /* RPR 6.5 Enable the USB controller to get reset by any software that generate a PCIRst# condition */ - byte = pm_ioread(0x65); - byte |= (1 << 4); - pm_iowrite(0x65, byte); - - /* USB_ADVANCED_SLEEP_CONTROL */ - byte = pm_ioread(0x95); - byte &= ~(7 << 0); - byte |= 6 << 0; /* Advanced sleep up to 6 uframes */ - pm_iowrite(0x95, byte); - - /* RPR 6.10 Disable OHCI MSI Capability. */ - word = pci_read_config16(dev, 0x40); - word |= (0x3 << 8); - pci_write_config16(dev, 0x40, word); - - /* USB-1_OHCI0_Corner Case S3 Wake Up */ - dword = pci_read_config32(dev, 0x50); - dword |= (1 << 16); - pci_write_config32(dev, 0x50, dword); -} - -static void usb_init2(struct device *dev) -{ - uint32_t dword; - void *usb2_bar0; - struct device *sm_dev; - uint8_t rev; - uint8_t ehci_async_data_cache; - uint8_t nvram; - - ehci_async_data_cache = 1; - if (get_option(&nvram, "ehci_async_data_cache") == CB_SUCCESS) - ehci_async_data_cache = !!nvram; - - sm_dev = pcidev_on_root(0x14, 0); - rev = get_sb700_revision(sm_dev); - - /* dword = pci_read_config32(dev, 0xf8); */ - /* dword |= 40; */ - /* pci_write_config32(dev, 0xf8, dword); */ - - usb2_bar0 = (void *)(pci_read_config32(dev, 0x10) & ~0xFF); - printk(BIOS_INFO, "usb2_bar0=0x%p\n", usb2_bar0); - - /* RPR6.4 Enables the USB PHY auto calibration resister to match 45ohm resistance */ - dword = 0x00020F00; - write32(usb2_bar0 + 0xC0, dword); - - /* RPR6.9 Sets In/OUT FIFO threshold for best performance */ - dword = 0x00400040; - write32(usb2_bar0 + 0xA4, dword); - - /* RPR6.11 Disabling EHCI Advance Asynchronous Enhancement */ - dword = pci_read_config32(dev, 0x50); - dword |= (1 << 28); - pci_write_config32(dev, 0x50, dword); - - /* RPR 6.12 EHCI Advance PHY Power Savings */ - /* RPR says it is just for A12. CIMM sets it when it is above A11. */ - /* But it makes the linux crash, so we skip it */ - dword = pci_read_config32(dev, 0x50); - dword |= 1 << 31; - pci_write_config32(dev, 0x50, dword); - - /* RPR6.13 Enabling Fix for EHCI Controller Driver Yellow Sign Issue */ - /* RPR says it is just for A12. CIMx sets it when it is above A11. */ - dword = pci_read_config32(dev, 0x50); - dword |= (1 << 20); - pci_write_config32(dev, 0x50, dword); - - /* RPR6.15 EHCI Async Park Mode */ - dword = pci_read_config32(dev, 0x50); - dword |= (1 << 23); - pci_write_config32(dev, 0x50, dword); - - /* Each step below causes the linux crashes. Leave them here - * for future debugging. */ - u8 byte; - u16 word; - - /* RPR6.16 Disable EHCI MSI support */ - byte = pci_read_config8(dev, 0x50); - byte |= (1 << 6); - pci_write_config8(dev, 0x50, byte); - - /* RPR6.17 Disable the EHCI Dynamic Power Saving feature */ - word = read32(usb2_bar0 + 0xBC); - word &= ~(1 << 12); - write16(usb2_bar0 + 0xBC, word); - - /* RPR6.19 USB Controller DMA Read Delay Tolerant. */ - if (rev >= REV_SB700_A14) { - byte = pci_read_config8(dev, 0x50); - byte |= (1 << 7); - pci_write_config8(dev, 0x50, byte); - } - - /* SB700_A15, USB-2_EHCI_PID_ERROR_CHECKING */ - if (rev == REV_SB700_A15) { - word = pci_read_config16(dev, 0x50); - word |= (1 << 9); - pci_write_config16(dev, 0x50, word); - } - - /* RPR6.20 Async Park Mode. */ - /* RPR recommends not to set these bits. */ - #if 0 - dword = pci_read_config32(dev, 0x50); - dword |= 1 << 23; - if (rev >= REV_SB700_A14) { - dword &= ~(1 << 2); - } - pci_write_config32(dev, 0x50, dword); - #endif - - /* RPR6.22 Advance Async Enhancement */ - /* RPR6.23 USB Periodic Cache Setting */ - dword = pci_read_config32(dev, 0x50); - if (rev == REV_SB700_A12) { - dword |= 1 << 28; /* 6.22 */ - dword |= 1 << 27; /* 6.23 */ - } else if (rev >= REV_SB700_A14) { - dword |= 1 << 3; - dword &= ~(1 << 28); /* 6.22 */ - dword |= 1 << 8; - dword &= ~(1 << 27); /* 6.23 */ - } -#if CONFIG(SOUTHBRIDGE_AMD_SUBTYPE_SP5100) - /* SP5100 Erratum 36 */ - dword &= ~(1 << 26); - if (!ehci_async_data_cache) - dword |= 1 << 26; -#endif - pci_write_config32(dev, 0x50, dword); - printk(BIOS_DEBUG, "rpr 6.23, final dword=%x\n", dword); -} - -static struct device_operations usb_ops = { - .read_resources = pci_ehci_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = usb_init, - .scan_bus = 0, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver usb_0_driver __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB700_USB_18_0, -}; - -static const struct pci_driver usb_1_driver __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB700_USB_18_1, -}; - -/* the pci id of usb ctrl 0 and 1 are the same. */ -/* - * static const struct pci_driver usb_3_driver __pci_driver = { - * .ops = &usb_ops, - * .vendor = PCI_VENDOR_ID_ATI, - * .device = PCI_DEVICE_ID_ATI_SB700_USB_19_0, - * }; - * static const struct pci_driver usb_4_driver __pci_driver = { - * .ops = &usb_ops, - * .vendor = PCI_VENDOR_ID_ATI, - * .device = PCI_DEVICE_ID_ATI_SB700_USB_19_1, - * }; - */ - -static const struct pci_driver usb_4_driver __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB700_USB_20_5, -}; - -static struct device_operations usb_ops2 = { - .read_resources = pci_ehci_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = usb_init2, - .scan_bus = 0, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver usb_5_driver __pci_driver = { - .ops = &usb_ops2, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB700_USB_18_2, -}; -/* - * static const struct pci_driver usb_5_driver __pci_driver = { - * .ops = &usb_ops2, - * .vendor = PCI_VENDOR_ID_ATI, - * .device = PCI_DEVICE_ID_ATI_SB700_USB_19_2, - * }; - */ |