diff options
Diffstat (limited to 'src/southbridge/amd/sb700/early_setup.c')
| -rw-r--r-- | src/southbridge/amd/sb700/early_setup.c | 30 |
1 files changed, 4 insertions, 26 deletions
diff --git a/src/southbridge/amd/sb700/early_setup.c b/src/southbridge/amd/sb700/early_setup.c index 81ffc1c7d5..f1f0548a79 100644 --- a/src/southbridge/amd/sb700/early_setup.c +++ b/src/southbridge/amd/sb700/early_setup.c @@ -92,7 +92,6 @@ static u8 set_sb700_revision(void) * Serial port 0 * KBC Port * ACPI Micro-controller port -* LPC ROM size * This function does not change port 0x80 decoding. * Console output through any port besides 0x3f8 is unsupported. * If you use FWH ROMs, you have to setup IDSEL. @@ -134,27 +133,13 @@ static void sb700_lpc_init(void) reg8 |= 1 << 0; pci_write_config8(dev, 0xbb, reg8); - /* SuperIO, LPC ROM */ + /* Super I/O, RTC */ reg8 = pci_read_config8(dev, 0x48); /* Decode ports 0x2e-0x2f, 0x4e-0x4f (SuperI/O configuration) */ reg8 |= (1 << 1) | (1 << 0); - /* Decode variable LPC ROM address ranges 1&2 (see register 0x68-0x6b, 0x6c-0x6f) */ - reg8 |= (1 << 3) | (1 << 4); /* Decode port 0x70-0x73 (RTC) */ - reg8 |= 1 << 6; + reg8 |= (1 << 6); pci_write_config8(dev, 0x48, reg8); - - /* hardware should enable LPC ROM by pin straps */ - /* ROM access at 0xFFF80000/0xFFF00000 - 0xFFFFFFFF */ - /* See detail in 43366_sb700_bdg_nda_1.01.pdf page 17. */ - /* enable LPC ROM range mirroring start 0x000e(0000) */ - pci_write_config16(dev, 0x68, 0x000e); - /* enable LPC ROM range mirroring end 0x000f(ffff) */ - pci_write_config16(dev, 0x6a, 0x000f); - /* enable LPC ROM range start, 0xfff8(0000): 512KB, 0xfff0(0000): 1MB */ - pci_write_config16(dev, 0x6c, 0xfff0); - /* enable LPC ROM range end at 0xffff(ffff) */ - pci_write_config16(dev, 0x6e, 0xffff); } /* what is its usage? */ @@ -403,13 +388,12 @@ static void sb700_devices_por_init(void) pci_write_config8(dev, 0x46, 0xC3); pci_write_config8(dev, 0x47, 0xFF); + // TODO: This has already been done(?) /* IO/Mem Port Decode Enable, I don't know why CIM disable some ports. * Disable LPC TimeOut counter, enable SuperIO Configuration Port (2e/2f), - * Alternate SuperIO Configuration Port (4e/4f), Wide Generic IO Port (64/65). - * Enable bits for LPC ROM memory address range 1&2 for 1M ROM setting.*/ + * Alternate Super I/O Configuration Port (4e/4f), Wide Generic IO Port (64/65). */ byte = pci_read_config8(dev, 0x48); byte |= (1 << 1) | (1 << 0); /* enable Super IO config port 2e-2h, 4e-4f */ - byte |= (1 << 3) | (1 << 4); /* enable for LPC ROM address range1&2, Enable 512KB rom access at 0xFFF80000 - 0xFFFFFFFF */ byte |= 1 << 6; /* enable for RTC I/O range */ pci_write_config8(dev, 0x48, byte); pci_write_config8(dev, 0x49, 0xFF); @@ -418,12 +402,6 @@ static void sb700_devices_por_init(void) byte |= ((1 << 1) + (1 << 6)); /*0x42, save the configuraion for port 0x80. */ pci_write_config8(dev, 0x4A, byte); - /* Set LPC ROM size, it has been done in sb700_lpc_init(). - * enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB; - * enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB - * pci_write_config16(dev, 0x68, 0x000e) - * pci_write_config16(dev, 0x6c, 0xfff0);*/ - /* Enable Tpm12_en and Tpm_legacy. I don't know what is its usage and copied from CIM. */ pci_write_config8(dev, 0x7C, 0x05); |