diff options
Diffstat (limited to 'src/southbridge/amd/sb600')
-rw-r--r-- | src/southbridge/amd/sb600/sb600_hda.c | 6 | ||||
-rw-r--r-- | src/southbridge/amd/sb600/sb600_sata.c | 4 | ||||
-rw-r--r-- | src/southbridge/amd/sb600/sb600_sm.c | 2 | ||||
-rw-r--r-- | src/southbridge/amd/sb600/sb600_usb.c | 2 |
4 files changed, 7 insertions, 7 deletions
diff --git a/src/southbridge/amd/sb600/sb600_hda.c b/src/southbridge/amd/sb600/sb600_hda.c index 1768350686..84df3f169f 100644 --- a/src/southbridge/amd/sb600/sb600_hda.c +++ b/src/southbridge/amd/sb600/sb600_hda.c @@ -53,7 +53,7 @@ static int set_bits(u32 port, u32 mask, u32 val) dword &= mask; } while ((dword != val) && --count); - /* Timeout occured */ + /* Timeout occurred */ if (!count) return -1; return 0; @@ -169,7 +169,7 @@ static u32 find_verb(u32 viddid, u32 ** verb) } /** - * Wait 50usec for for the codec to indicate it is ready + * Wait 50usec for the codec to indicate it is ready * no response would imply that the codec is non-operative */ static int wait_for_ready(u32 base) @@ -190,7 +190,7 @@ static int wait_for_ready(u32 base) } /** - * Wait 50usec for for the codec to indicate that it accepted + * Wait 50usec for the codec to indicate that it accepted * the previous command. No response would imply that the code * is non-operative */ diff --git a/src/southbridge/amd/sb600/sb600_sata.c b/src/southbridge/amd/sb600/sb600_sata.c index 0feebac92f..055e7daa85 100644 --- a/src/southbridge/amd/sb600/sb600_sata.c +++ b/src/southbridge/amd/sb600/sb600_sata.c @@ -39,7 +39,7 @@ static int sata_drive_detect(int portnum, u16 iobar) if (byte != (0xA0 + 0x10 * (portnum % 2))) { /* This will happen at the first iteration of this loop * if the first SATA port is unpopulated and the - * second SATA port is poulated. + * second SATA port is populated. */ printk(BIOS_DEBUG, "drive no longer selected after %i ms, " "retrying init\n", i * 10); @@ -83,7 +83,7 @@ static void sata_init(struct device *dev) byte = 0x6 << 2; pci_write_config8(sm_dev, 0xaf, byte); - /* get base addresss */ + /* get base address */ sata_bar5 = pci_read_config32(dev, 0x24) & ~0x3FF; sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7; sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3; diff --git a/src/southbridge/amd/sb600/sb600_sm.c b/src/southbridge/amd/sb600/sb600_sm.c index 66e93e6e33..71e546beca 100644 --- a/src/southbridge/amd/sb600/sb600_sm.c +++ b/src/southbridge/amd/sb600/sb600_sm.c @@ -338,7 +338,7 @@ static void sb600_sm_set_resources(struct device *dev) pci_dev_set_resources(dev); - /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */ + /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridge */ byte = pm_ioread(0x52); byte |= 1 << 6; pm_iowrite(0x52, byte); diff --git a/src/southbridge/amd/sb600/sb600_usb.c b/src/southbridge/amd/sb600/sb600_usb.c index 942f2309d6..7539f083c6 100644 --- a/src/southbridge/amd/sb600/sb600_usb.c +++ b/src/southbridge/amd/sb600/sb600_usb.c @@ -96,7 +96,7 @@ static void usb_init2(struct device *dev) usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF; printk(BIOS_INFO, "usb2_bar0=0x%x\n", usb2_bar0); - /* RPR5.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */ + /* RPR5.4 Enables the USB PHY auto calibration resister to match 45ohm resistance */ dword = 0x00020F00; write32(usb2_bar0 + 0xC0, dword); |