diff options
Diffstat (limited to 'src/southbridge/amd/sb600/sb600_sm.c')
-rw-r--r-- | src/southbridge/amd/sb600/sb600_sm.c | 375 |
1 files changed, 0 insertions, 375 deletions
diff --git a/src/southbridge/amd/sb600/sb600_sm.c b/src/southbridge/amd/sb600/sb600_sm.c deleted file mode 100644 index b074edb89e..0000000000 --- a/src/southbridge/amd/sb600/sb600_sm.c +++ /dev/null @@ -1,375 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <device/smbus.h> -#include <pc80/mc146818rtc.h> -#include <bitops.h> -#include <arch/io.h> -#include <cpu/x86/lapic.h> -#include <arch/ioapic.h> -#include <stdlib.h> -#include "sb600.h" -#include "sb600_smbus.c" - -#define NMI_OFF 0 - -#define MAINBOARD_POWER_OFF 0 -#define MAINBOARD_POWER_ON 1 - -#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON -#endif - -/* -* SB600 enables all USB controllers by default in SMBUS Control. -* SB600 enables SATA by default in SMBUS Control. -*/ -static void sm_init(device_t dev) -{ - u8 byte; - u8 byte_old; - u32 dword; - u32 ioapic_base; - u32 on; - u32 nmi_option; - - printk(BIOS_INFO, "sm_init().\n"); - - ioapic_base = pci_read_config32(dev, 0x74) & (0xffffffe0); /* some like mem resource, but does not have enable bit */ - /* Don't rename APIC ID */ - clear_ioapic(ioapic_base); - - dword = pci_read_config8(dev, 0x62); - dword |= 1 << 2; - pci_write_config8(dev, 0x62, dword); - - dword = pci_read_config32(dev, 0x78); - dword |= 1 << 9; - pci_write_config32(dev, 0x78, dword); /* enable 0xCD6 0xCD7 */ - - /* bit 10: MultiMediaTimerIrqEn */ - dword = pci_read_config8(dev, 0x64); - dword |= 1 << 10; - pci_write_config8(dev, 0x64, dword); - /* enable serial irq */ - byte = pci_read_config8(dev, 0x69); - byte |= 1 << 7; /* enable serial irq function */ - byte &= ~(0xF << 2); - byte |= 4 << 2; /* set NumSerIrqBits=4 */ - pci_write_config8(dev, 0x69, byte); - - byte = pm_ioread(0x61); - byte |= 1 << 1; /* Set to enable NB/SB handshake during IOAPIC interrupt for AMD K8/K7 */ - pm_iowrite(0x61, byte); - - /* disable SMI */ - byte = pm_ioread(0x53); - byte |= 1 << 3; - pm_iowrite(0x53, byte); - - /* power after power fail */ - on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; - get_option(&on, "power_on_after_fail"); - byte = pm_ioread(0x74); - byte &= ~0x03; - if (on) { - byte |= 2; - } - byte |= 1 << 2; - pm_iowrite(0x74, byte); - printk(BIOS_INFO, "set power %s after power fail\n", on ? "on" : "off"); - - /* sb600 rpr:2.3.3: */ - byte = pm_ioread(0x9A); - byte |= 1 << 5 | 1 << 4 | 1 << 2; - pm_iowrite(0x9A, byte); - - byte = pm_ioread(0x8F); - byte |= 1 << 5; - byte &= ~(1 << 4); - pm_iowrite(0x8F, byte); - - pm_iowrite(0x8B, 0x01); - pm_iowrite(0x8A, 0x90); - pm_iowrite(0x88, 0x10); /* A21 */ - - byte = pm_ioread(0x7C); - byte |= 1 << 0; - pm_iowrite(0x7C, byte); - - byte = pm_ioread(0x68); - byte &= ~(1 << 1); - /* 2.6 */ - byte |= 1 << 2; - pm_iowrite(0x68, byte); - - /* 2.6 */ - byte = pm_ioread(0x65); - byte &= ~(1 << 7); - pm_iowrite(0x65, byte); - - /* 2.3.4 */ - byte = pm_ioread(0x52); - byte &= ~0x2F; - byte |= 0x8; - pm_iowrite(0x52, byte); - - byte = pm_ioread(0x8D); - byte &= ~(1 << 6); - pm_iowrite(0x8D, byte); - - byte = pm_ioread(0x61); - byte &= ~(1 << 2); - pm_iowrite(0x61, byte); - - byte = pm_ioread(0x42); - byte &= ~(1 << 2); - pm_iowrite(0x42, byte); - - /* Set up NMI on errors */ - byte = inb(0x70); /* RTC70 */ - byte_old = byte; - nmi_option = NMI_OFF; - get_option(&nmi_option, "nmi"); - if (nmi_option) { - byte &= ~(1 << 7); /* set NMI */ - printk(BIOS_INFO, "++++++++++set NMI+++++\n"); - } else { - byte |= (1 << 7); /* Can not mask NMI from PCI-E and NMI_NOW */ - printk(BIOS_INFO, "++++++++++no set NMI+++++\n"); - } - byte &= ~(1 << 7); - if (byte != byte_old) { - outb(byte, 0x70); - } - - /* 2.10 IO Trap Settings */ - abcfg_reg(0x10090, 1 << 16, 1 << 16); - - /* ab index */ - pci_write_config32(dev, 0xF0, AB_INDX); - /* Initialize the real time clock */ - rtc_init(0); - - /*3.4 Enabling IDE/PCIB Prefetch for Performance Enhancement */ - abcfg_reg(0x10060, 9 << 17, 9 << 17); - abcfg_reg(0x10064, 9 << 17, 9 << 17); - - /* 3.5 Enabling OHCI Prefetch for Performance Enhancement */ - abcfg_reg(0x80, 1 << 0, 1<< 0); - - /* 3.6 B-Link Client's Credit Variable Settings for the Downstream Arbitration Equation */ - /* 3.7 Enabling Additional Address Bits Checking in Downstream */ - abcfg_reg(0x9c, 3 << 0, 3 << 0); - - /* 3.8 Set B-Link Prefetch Mode */ - abcfg_reg(0x80, 3 << 17, 3 << 17); - - /* 3.9 Enabling Detection of Upstream Interrupts */ - abcfg_reg(0x94, 1 << 20,1 << 20); - - /* 3.10: Enabling Downstream Posted Transactions to Pass Non-Posted - * Transactions for the K8 Platform (for All Revisions) */ - abcfg_reg(0x10090, 1 << 8, 1 << 8); - - /* 3.11:Programming Cycle Delay for AB and BIF Clock Gating */ - /* 3.12: Enabling AB and BIF Clock Gating */ - abcfg_reg(0x10054, 0xFFFF0000, 0x1040000); - abcfg_reg(0x54, 0xFF << 16, 4 << 16); - printk(BIOS_INFO, "3.11, ABCFG:0x54\n"); - abcfg_reg(0x54, 1 << 24, 1 << 24); - printk(BIOS_INFO, "3.12, ABCFG:0x54\n"); - abcfg_reg(0x98, 0x0000FF00, 0x00004700); - - /* 3.13:Enabling AB Int_Arbiter Enhancement (for All Revisions) */ - abcfg_reg(0x10054, 0x0000FFFF, 0x07FF); - - /* 3.14:Enabling L1 on A-link Express */ - axcfg_reg(0x68, 0x00000003, 0x2); - axindxp_reg(0xa0, 0x0000F000, 0x6000); - - abcfg_reg(0x10098, 0xFFFFFFFF, 0x4000); - abcfg_reg(0x04, 0xFFFFFFFF, 0x6); - printk(BIOS_INFO, "sm_init() end\n"); - - /* Enable NbSb virtual channel */ - axcfg_reg(0x114, 0x3f << 1, 0 << 1); - axcfg_reg(0x120, 0x7f << 1, 0x7f << 1); - axcfg_reg(0x120, 7 << 24, 1 << 24); - axcfg_reg(0x120, 1 << 31, 1 << 31); - abcfg_reg(0x50, 1 << 3, 1 << 3); -} - -static int lsmbus_recv_byte(device_t dev) -{ - u32 device; - struct resource *res; - struct bus *pbus; - - device = dev->path.i2c.device; - pbus = get_pbus_smbus(dev); - - res = find_resource(pbus->dev, 0x10); - - return do_smbus_recv_byte(res->base, device); -} - -static int lsmbus_send_byte(device_t dev, u8 val) -{ - u32 device; - struct resource *res; - struct bus *pbus; - - device = dev->path.i2c.device; - pbus = get_pbus_smbus(dev); - - res = find_resource(pbus->dev, 0x10); - - return do_smbus_send_byte(res->base, device, val); -} - -static int lsmbus_read_byte(device_t dev, u8 address) -{ - u32 device; - struct resource *res; - struct bus *pbus; - - device = dev->path.i2c.device; - pbus = get_pbus_smbus(dev); - - res = find_resource(pbus->dev, 0x10); - - return do_smbus_read_byte(res->base, device, address); -} - -static int lsmbus_write_byte(device_t dev, u8 address, u8 val) -{ - u32 device; - struct resource *res; - struct bus *pbus; - - device = dev->path.i2c.device; - pbus = get_pbus_smbus(dev); - - res = find_resource(pbus->dev, 0x10); - - return do_smbus_write_byte(res->base, device, address, val); -} -static struct smbus_bus_operations lops_smbus_bus = { - .recv_byte = lsmbus_recv_byte, - .send_byte = lsmbus_send_byte, - .read_byte = lsmbus_read_byte, - .write_byte = lsmbus_write_byte, -}; - -static void sb600_sm_read_resources(device_t dev) -{ - struct resource *res; - u8 byte; - - /* rpr2.14: Hides SM bus controller Bar1 where stores HPET MMIO base address */ - byte = pm_ioread(0x55); - byte |= 1 << 7; - pm_iowrite(0x55, byte); - - /* Get the normal pci resources of this device */ - /* pci_dev_read_resources(dev); */ - - byte = pm_ioread(0x55); - byte &= ~(1 << 7); - pm_iowrite(0x55, byte); - - /* apic */ - res = new_resource(dev, 0x74); - res->base = IO_APIC_ADDR; - res->size = 256 * 0x10; - res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */ - res->align = 8; - res->gran = 8; - res->flags = IORESOURCE_MEM | IORESOURCE_FIXED; - - res = new_resource(dev, 0x14); /* hpet */ - res->base = 0xfed00000; /* reset hpet to widely accepted address */ - res->size = 0x400; - res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */ - res->align = 8; - res->gran = 8; - res->flags = IORESOURCE_MEM | IORESOURCE_FIXED; - /* dev->command |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; */ - - /* smbus */ - res = new_resource(dev, 0x10); - res->base = 0xB00; - res->size = 0x10; - res->limit = 0xFFFFUL; /* res->base + res->size -1; */ - res->align = 8; - res->gran = 8; - res->flags = IORESOURCE_IO | IORESOURCE_FIXED; - - compact_resources(dev); - -} - -static void sb600_sm_set_resources(struct device *dev) -{ - struct resource *res; - u8 byte; - - pci_dev_set_resources(dev); - - /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridge */ - byte = pm_ioread(0x52); - byte |= 1 << 6; - pm_iowrite(0x52, byte); - - res = find_resource(dev, 0x74); - pci_write_config32(dev, 0x74, res->base | 1 << 3); - - res = find_resource(dev, 0x14); - pci_write_config32(dev, 0x14, res->base); - - res = find_resource(dev, 0x10); - pci_write_config32(dev, 0x10, res->base | 1); -} - -static struct pci_operations lops_pci = { - .set_subsystem = pci_dev_set_subsystem, -}; - -static struct device_operations smbus_ops = { - .read_resources = sb600_sm_read_resources, - .set_resources = sb600_sm_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = sm_init, - .scan_bus = scan_static_bus, - /* .enable = sb600_enable, */ - .ops_pci = &lops_pci, - .ops_smbus_bus = &lops_smbus_bus, -}; - -static const struct pci_driver smbus_driver __pci_driver = { - .ops = &smbus_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB600_SM, -}; |