diff options
Diffstat (limited to 'src/southbridge/amd/sb600/hda.c')
| -rw-r--r-- | src/southbridge/amd/sb600/hda.c | 325 |
1 files changed, 0 insertions, 325 deletions
diff --git a/src/southbridge/amd/sb600/hda.c b/src/southbridge/amd/sb600/hda.c deleted file mode 100644 index 367866f11f..0000000000 --- a/src/southbridge/amd/sb600/hda.c +++ /dev/null @@ -1,325 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <arch/io.h> -#include <delay.h> -#include "sb600.h" - -#define HDA_ICII_REG 0x68 -#define HDA_ICII_BUSY (1 << 0) -#define HDA_ICII_VALID (1 << 1) - -static int set_bits(void *port, u32 mask, u32 val) -{ - u32 dword; - int count; - - /* Write (val & ~mask) to port */ - val &= mask; - dword = read32(port); - dword &= ~mask; - dword |= val; - write32(port, dword); - - /* Wait for readback of register to - * match what was just written to it - */ - count = 50; - do { - /* Wait 1ms based on BKDG wait time */ - mdelay(1); - dword = read32(port); - dword &= mask; - } while ((dword != val) && --count); - - /* Timeout occurred */ - if (!count) - return -1; - return 0; -} - -static u32 codec_detect(void *base) -{ - u32 dword; - - /* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */ - if (set_bits(base + 0x08, 1, 0) == -1) - goto no_codec; - - /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ - if (set_bits(base + 0x08, 1, 1) == -1) - goto no_codec; - - /* Delay for 1 ms since the BKDG does */ - mdelay(1); - - /* Read in Codec location (BAR + 0xe)[3..0]*/ - dword = read32(base + 0xe); - dword &= 0x0F; - if (!dword) - goto no_codec; - - return dword; - -no_codec: - /* Codec Not found */ - /* Put HDA back in reset (BAR + 0x8) [0] */ - set_bits(base + 0x08, 1, 0); - printk(BIOS_DEBUG, "No codec!\n"); - return 0; -} - -static u32 cim_verb_data[] = { - 0x01471c10, - 0x01471d40, - 0x01471e01, - 0x01471f01, -/* 1 */ - 0x01571c12, - 0x01571d10, - 0x01571e01, - 0x01571f01, -/* 2 */ - 0x01671c11, - 0x01671d60, - 0x01671e01, - 0x01671f01, -/* 3 */ - 0x01771c14, - 0x01771d20, - 0x01771e01, - 0x01771f01, -/* 4 */ - 0x01871c30, - 0x01871d90, - 0x01871ea1, - 0x01871f01, -/* 5 */ - 0x01971cf0, - 0x01971d11, - 0x01971e11, - 0x01971f41, -/* 6 */ - 0x01a71c80, - 0x01a71d30, - 0x01a71e81, - 0x01a71f01, -/* 7 */ - 0x01b71cf0, - 0x01b71d11, - 0x01b71e11, - 0x01b71f41, -/* 8 */ - 0x01c71cf0, - 0x01c71d11, - 0x01c71e11, - 0x01c71f41, -/* 9 */ - 0x01d71cf0, - 0x01d71d11, - 0x01d71e11, - 0x01d71f41, -/* 10 */ - 0x01e71c50, - 0x01e71d11, - 0x01e71e44, - 0x01e71f01, -/* 11 */ - 0x01f71c60, - 0x01f71d61, - 0x01f71ec4, - 0x01f71f01, -}; - -static u32 find_verb(u32 viddid, u32 ** verb) -{ - struct device *azalia_dev = dev_find_slot(0, PCI_DEVFN(0x14, 2)); - struct southbridge_amd_sb600_config *cfg = - (struct southbridge_amd_sb600_config *)azalia_dev->chip_info; - if (!cfg) - return 0; - printk(BIOS_DEBUG, "Dev=%s\n", dev_path(azalia_dev)); - printk(BIOS_DEBUG, "Default viddid=%x\n", cfg->hda_viddid); - printk(BIOS_DEBUG, "Reading viddid=%x\n", viddid); - if (viddid != cfg->hda_viddid) - return 0; - *verb = (u32 *) cim_verb_data; - return sizeof(cim_verb_data) / sizeof(u32); -} - -/** - * Wait 50usec for the codec to indicate it is ready - * no response would imply that the codec is non-operative - */ -static int wait_for_ready(void *base) -{ - /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ - - int timeout = 50; - - while (timeout--) { - u32 dword = read32(base + HDA_ICII_REG); - if (!(dword & HDA_ICII_BUSY)) - return 0; - udelay(1); - } - - return -1; -} - -/** - * Wait 50usec for the codec to indicate that it accepted - * the previous command. No response would imply that the code - * is non-operative - */ -static int wait_for_valid(void *base) -{ - /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ - - int timeout = 50; - while (timeout--) { - u32 dword = read32(base + HDA_ICII_REG); - if ((dword & (HDA_ICII_VALID | HDA_ICII_BUSY)) == - HDA_ICII_VALID) - return 0; - udelay(1); - } - - return -1; -} - -static void codec_init(void *base, int addr) -{ - u32 dword; - u32 *verb; - u32 verb_size; - int i; - - /* 1 */ - if (wait_for_ready(base) == -1) - return; - - dword = (addr << 28) | 0x000f0000; - write32(base + 0x60, dword); - - if (wait_for_valid(base) == -1) - return; - - dword = read32(base + 0x64); - - /* 2 */ - printk(BIOS_DEBUG, "codec viddid: %08x\n", dword); - verb_size = find_verb(dword, &verb); - - if (!verb_size) { - printk(BIOS_DEBUG, "No verb!\n"); - return; - } - - printk(BIOS_DEBUG, "verb_size: %d\n", verb_size); - /* 3 */ - for (i = 0; i < verb_size; i++) { - if (wait_for_ready(base) == -1) - return; - - write32(base + 0x60, verb[i]); - - if (wait_for_valid(base) == -1) - return; - } - printk(BIOS_DEBUG, "verb loaded!\n"); -} - -static void codecs_init(void *base, u32 codec_mask) -{ - int i; - for (i = 2; i >= 0; i--) { - if (codec_mask & (1 << i)) - codec_init(base, i); - } -} - -static void hda_init(struct device *dev) -{ - u8 byte; - u32 dword; - void *base; - struct resource *res; - u32 codec_mask; - struct device *sm_dev; - - /* Enable azalia - PM_io 0x59[4], disable ac97 - PM_io 0x59[1..0] */ - pm_iowrite(0x59, 0xB); - - /* Find the SMBus */ - sm_dev = dev_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM, 0); - - /* Set routing pin - SMBus ExtFunc (0xf8/0xfc) */ - pci_write_config32(sm_dev, 0xf8, 0x00); - pci_write_config8(sm_dev, 0xfc, 0xAA); - /* Set INTA - SMBus 0x63 [2..0] */ - byte = pci_read_config8(sm_dev, 0x63); - byte &= ~0x7; - byte |= 0x0; /* INTA:0x0 - INTH:0x7 */ - pci_write_config8(sm_dev, 0x63, byte); - - /* Program the 2C to 0x437b1002 */ - dword = 0x437b1002; - pci_write_config32(dev, 0x2c, dword); - - /* Read in BAR */ - /* Is this right? HDA allows for a 64-bit BAR - * but this is only setup for a 32-bit one - */ - res = find_resource(dev, 0x10); - if (!res) - return; - - base = res2mmio(res, 0, 0); - printk(BIOS_DEBUG, "base = 0x%p\n", base); - codec_mask = codec_detect(base); - - if (codec_mask) { - printk(BIOS_DEBUG, "codec_mask = %02x\n", codec_mask); - codecs_init(base, codec_mask); - } -} - -static struct pci_operations lops_pci = { - .set_subsystem = pci_dev_set_subsystem, -}; - -static struct device_operations hda_audio_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - /*.enable = sb600_enable, */ - .init = hda_init, - .scan_bus = 0, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver hdaaudio_driver __pci_driver = { - .ops = &hda_audio_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB600_HDA, -}; |