diff options
Diffstat (limited to 'src/southbridge/amd/rs690')
-rw-r--r-- | src/southbridge/amd/rs690/chip.h | 4 | ||||
-rw-r--r-- | src/southbridge/amd/rs690/rs690.c | 95 | ||||
-rw-r--r-- | src/southbridge/amd/rs690/rs690_cmn.c | 4 | ||||
-rw-r--r-- | src/southbridge/amd/rs690/rs690_early_setup.c | 5 | ||||
-rw-r--r-- | src/southbridge/amd/rs690/rs690_gfx.c | 25 | ||||
-rw-r--r-- | src/southbridge/amd/rs690/rs690_ht.c | 2 | ||||
-rw-r--r-- | src/southbridge/amd/rs690/rs690_pcie.c | 31 |
7 files changed, 50 insertions, 116 deletions
diff --git a/src/southbridge/amd/rs690/chip.h b/src/southbridge/amd/rs690/chip.h index 9eb71aa0b3..176b744fe0 100644 --- a/src/southbridge/amd/rs690/chip.h +++ b/src/southbridge/amd/rs690/chip.h @@ -21,9 +21,9 @@ #define RS690_CHIP_H /* Member variables are defined in Config.lb. */ -struct southbridge_amd_rs690_config +struct southbridge_amd_rs690_config { - unsigned long vga_rom_address; /* The location that the VGA rom has been appened. */ + u32 vga_rom_address; /* The location that the VGA rom has been appened. */ u8 gpp_configuration; /* The configuration of General Purpose Port, A/B/C/D/E. */ u8 port_enable; /* Which port is enabled? GFX(2,3), GPP(4,5,6,7) */ u8 gfx_dev2_dev3; /* for GFX Core initialization REFCLK_SEL */ diff --git a/src/southbridge/amd/rs690/rs690.c b/src/southbridge/amd/rs690/rs690.c index dab5167d94..3caa00e9c8 100644 --- a/src/southbridge/amd/rs690/rs690.c +++ b/src/southbridge/amd/rs690/rs690.c @@ -29,25 +29,6 @@ #include <cpu/amd/mtrr.h> #include "rs690.h" -static device_t find_nb_dev(device_t dev, u32 devfn) -{ - device_t nb_dev; - - nb_dev = dev_find_slot(dev->bus->secondary, devfn); - - if (!nb_dev) - return nb_dev; - - if ((nb_dev->vendor != PCI_VENDOR_ID_ATI) - || (nb_dev->device != PCI_DEVICE_ID_ATI_RS690_HT)) { - u32 id; - id = pci_read_config32(nb_dev, PCI_VENDOR_ID); - if (id != (PCI_VENDOR_ID_ATI | (PCI_DEVICE_ID_ATI_RS690_HT << 16))) { - nb_dev = 0; - } - } - return nb_dev; -} /***************************************** * Compliant with CIM_33's ATINB_MiscClockCtrl @@ -65,7 +46,7 @@ void static rs690_config_misc_clk(device_t nb_dev) word = pci_cf8_conf1.read16(&pbus, 0, 1, 0xf8); word &= 0xf00; - pci_cf8_conf1.write16(&pbus, 0, 1, 0xf8, word); + pci_cf8_conf1.write16(&pbus, 0, 1, 0xf8, word); word = pci_cf8_conf1.read16(&pbus, 0, 1, 0xe8); word &= ~((1 << 12) | (1 << 13) | (1 << 14)); @@ -123,6 +104,12 @@ void static rs690_config_misc_clk(device_t nb_dev) set_htiu_enable_bits(nb_dev, 0x05, 7 << 8, 7 << 8); } + +u32 get_vid_did(device_t dev) +{ + return pci_read_config32(dev, 0); +} + /*********************************************** * 0:00.0 NBCFG : * 0:00.1 CLK : bit 0 of nb_cfg 0x4c : 0 - disable, default @@ -140,39 +127,25 @@ void static rs690_config_misc_clk(device_t nb_dev) void rs690_enable(device_t dev) { device_t nb_dev = 0, sb_dev = 0; - int index = -1; - u32 i; - u32 devfn; - u32 deviceid, vendorid; - - vendorid = pci_read_config32(dev, PCI_VENDOR_ID); - deviceid = (vendorid >> 16) & 0xffff; - vendorid &= 0xffff; - printk_info("rs690_enable VID=0x%x, DID=0x%x\n", vendorid, deviceid); - - /********************************************************** - * Work for bus0, internal GFX located on bus1 and will return after find_nb_dev. - **********************************************************/ - i = (dev->path.u.pci.devfn) & ~7; - for (devfn = 0; devfn <= i; devfn += (1 << 3)) { - nb_dev = find_nb_dev(dev, devfn); - if (nb_dev) - break; - } + int dev_ind; + + printk_info("rs690_enable: dev=0x%x, VID_DID=0x%x\n", dev, get_vid_did(dev)); + + nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); if (!nb_dev) { - printk_info("CAN NOT FIND RS690 DEVICE!\n"); - return; /* nb_dev is not dev */ + die("rs690_enable: CAN NOT FIND RS690 DEVICE, HALT!\n"); + /* NOT REACHED */ } /* sb_dev (dev 8) is a bridge that links to southbridge. */ sb_dev = dev_find_slot(0, PCI_DEVFN(8, 0)); if (!sb_dev) { - printk_info("rs690_enable CAN NOT FIND SB bridge, HALT!\n"); - for (;;) ; + die("rs690_enable: CAN NOT FIND SB bridge, HALT!\n"); + /* NOT REACHED */ } - printk_info("rs690_enable bus0, dev=0x%x\n", (dev->path.u.pci.devfn - devfn) >> 3); - switch (dev->path.u.pci.devfn - devfn) { + dev_ind = dev->path.u.pci.devfn >> 3; + switch (dev_ind) { case 0: /* bus0, dev0, fun0; */ printk_info("Bus-0, Dev-0, Fun-0.\n"); enable_pcie_bar3(nb_dev); /* PCIEMiscInit */ @@ -185,36 +158,34 @@ void rs690_enable(device_t dev) rs690_config_misc_clk(nb_dev); break; - case 1 << 3: /* bus0, dev1 */ + case 1: /* bus0, dev1 */ printk_info("Bus-0, Dev-1, Fun-0.\n"); break; - case 2 << 3: /* bus0, dev2,3, two GFX */ - case 3 << 3: + case 2: /* bus0, dev2,3, two GFX */ + case 3: printk_info("Bus-0, Dev-2,3, Fun-0. enable=%d\n", dev->enabled); - index = (dev->path.u.pci.devfn - devfn) >> 3; - set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << index, - (dev->enabled ? 0 : 1) << index); + set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, + (dev->enabled ? 0 : 1) << dev_ind); if (dev->enabled) - rs690_gfx_init(nb_dev, dev, index); + rs690_gfx_init(nb_dev, dev, dev_ind); break; - case 4 << 3: /* bus0, dev4-7, four GPP */ - case 5 << 3: - case 6 << 3: - case 7 << 3: + case 4: /* bus0, dev4-7, four GPP */ + case 5: + case 6: + case 7: printk_info("Bus-0, Dev-4,5,6,7, Fun-0. enable=%d\n", dev->enabled); - index = (dev->path.u.pci.devfn - devfn) >> 3; - set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << index, - (dev->enabled ? 0 : 1) << index); + set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, + (dev->enabled ? 0 : 1) << dev_ind); if (dev->enabled) - rs690_gpp_sb_init(nb_dev, dev, index); + rs690_gpp_sb_init(nb_dev, dev, dev_ind); break; - case 8 << 3: /* bus0, dev8, SB */ + case 8: /* bus0, dev8, SB */ printk_info("Bus-0, Dev-8, Fun-0. enable=%d\n", dev->enabled); set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6, (dev->enabled ? 1 : 0) << 6); if (dev->enabled) - rs690_gpp_sb_init(nb_dev, dev, index); + rs690_gpp_sb_init(nb_dev, dev, dev_ind); disable_pcie_bar3(nb_dev); break; default: diff --git a/src/southbridge/amd/rs690/rs690_cmn.c b/src/southbridge/amd/rs690/rs690_cmn.c index 0ed377695e..b714dc87c5 100644 --- a/src/southbridge/amd/rs690/rs690_cmn.c +++ b/src/southbridge/amd/rs690/rs690_cmn.c @@ -63,8 +63,8 @@ void pci_ext_write_config32(device_t nb_dev, device_t dev, u32 reg_pos, u32 mask /*get BAR3 base address for nbcfg0x1c */ u32 addr = pci_read_config32(nb_dev, 0x1c); - printk_debug("write: addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, - dev->path.u.pci.devfn); + /*printk_debug("write: addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, + dev->path.u.pci.devfn);*/ addr |= dev->bus->secondary << 20 | /* bus num */ dev->path.u.pci.devfn << 12 | reg_pos; diff --git a/src/southbridge/amd/rs690/rs690_early_setup.c b/src/southbridge/amd/rs690/rs690_early_setup.c index 7e11fde5eb..08ce2515c4 100644 --- a/src/southbridge/amd/rs690/rs690_early_setup.c +++ b/src/southbridge/amd/rs690/rs690_early_setup.c @@ -18,7 +18,6 @@ */ - #define NBHTIU_INDEX 0xA8 #define NBMISC_INDEX 0x60 #define NBMC_INDEX 0xE8 @@ -185,7 +184,7 @@ static void rs690_htinit() * get k8's ht freq, in k8's function 0, offset 0x88 * bit11-8, specifics the maximum operation frequency of the link's transmitter clock. * The link frequency field (Frq) is cleared by cold reset. SW can write a nonzero - * value to this reg, and that value takes effect on the next warm reset or + * value to this reg, and that value takes effect on the next warm reset or * LDTSTOP_L disconnect sequence. * 0000b = 200Mhz * 0010b = 400Mhz @@ -300,7 +299,7 @@ static void rs690_por_pcicfg_init(device_t nb_dev) /*Reg8Ch[10:9] = 0x3 Enables Gfx Debug BAR, * force this BAR as mem type in rs690_gfx.c */ set_nbcfg_enable_bits_8(nb_dev, 0x8D, (u8)(~0xFF), 0x03); - + } /***************************************** diff --git a/src/southbridge/amd/rs690/rs690_gfx.c b/src/southbridge/amd/rs690/rs690_gfx.c index 9b5929611b..ebddda2b51 100644 --- a/src/southbridge/amd/rs690/rs690_gfx.c +++ b/src/southbridge/amd/rs690/rs690_gfx.c @@ -72,7 +72,7 @@ static void rs690_gfx_read_resources(device_t dev) static void internal_gfx_pci_dev_init(struct device *dev) { - unsigned short deviceid, vendorid; + u16 deviceid, vendorid; struct southbridge_amd_rs690_config *cfg = (struct southbridge_amd_rs690_config *)dev->chip_info; deviceid = pci_read_config16(dev, PCI_DEVICE_ID); @@ -109,11 +109,6 @@ static void internal_gfx_pci_dev_init(struct device *dev) clkind_write(dev, 0x5C, 0x0); } -static void rs690_gfx_set_resources(struct device *dev) -{ - printk_info("rs690_gfx_set_resources.\n"); - pci_dev_set_resources(dev); -} /* * Set registers in RS690 and CPU to enable the internal GFX. @@ -137,7 +132,7 @@ static void rs690_internal_gfx_enable(device_t dev) /* set TOM */ rs690_set_tom(nb_dev); - + /* LPC DMA Deadlock workaround? */ k8_f0 = dev_find_slot(0, PCI_DEVFN(0x18, 0)); l_dword = pci_read_config32(k8_f0, 0x68); @@ -206,9 +201,9 @@ static struct pci_operations lops_pci = { .set_subsystem = pci_dev_set_subsystem, }; -static struct device_operations ht_ops = { +static struct device_operations pcie_ops = { .read_resources = rs690_gfx_read_resources, - .set_resources = rs690_gfx_set_resources, + .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = internal_gfx_pci_dev_init, /* The option ROM initializes the device. rs690_gfx_init, */ .scan_bus = 0, @@ -216,8 +211,8 @@ static struct device_operations ht_ops = { .ops_pci = &lops_pci, }; -static struct pci_driver internal_gfx_driver __pci_driver = { - .ops = &ht_ops, +static struct pci_driver pcie_driver __pci_driver = { + .ops = &pcie_ops, .vendor = PCI_VENDOR_ID_ATI, .device = PCI_DEVICE_ID_ATI_RS690MT_INT_GFX, }; @@ -350,7 +345,7 @@ static void dual_port_configuration(device_t nb_dev, device_t dev) } -/* For single port GFX configuration Only +/* For single port GFX configuration Only * width: * 000 = x16 * 001 = x1 @@ -492,7 +487,7 @@ void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port) set_pcie_enable_bits(nb_dev, 0x10, 7 << 10, 4 << 10); printk_info("rs690_gfx_init step8.3.\n"); - /* step 8.4 if the LTSSM could not see all 8 TS1 during Polling Active, it can still + /* step 8.4 if the LTSSM could not see all 8 TS1 during Polling Active, it can still * time out and go back to Detect Idle.*/ set_pcie_enable_bits(dev, 0x02, 1 << 14, 1 << 14); printk_info("rs690_gfx_init step8.4.\n"); @@ -510,7 +505,7 @@ void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port) set_pcie_enable_bits(dev, 0xa0, 3 << 30, 3 << 30); printk_info("rs690_gfx_init step8.8.\n"); - /* step 8.9 Setting this register to 0x1 will workaround a PCI Compliance failure reported by Vista DTM. + /* step 8.9 Setting this register to 0x1 will workaround a PCI Compliance failure reported by Vista DTM. * SLOT_IMPLEMENTED@PCIE_CAP */ reg16 = pci_read_config16(dev, 0x5a); reg16 |= 0x100; @@ -563,7 +558,7 @@ void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port) /* step 10.e: LCLK clock gating, done in rs690_config_misc_clk() */ - /* step 11 Poll GPIO to determine whether it is single-port or dual-port configuration. + /* step 11 Poll GPIO to determine whether it is single-port or dual-port configuration. * While details will be added later in the document, for now assue the single-port configuration. */ /* skip */ diff --git a/src/southbridge/amd/rs690/rs690_ht.c b/src/southbridge/amd/rs690/rs690_ht.c index 808a7225a5..40a85f6c17 100644 --- a/src/southbridge/amd/rs690/rs690_ht.c +++ b/src/southbridge/amd/rs690/rs690_ht.c @@ -61,7 +61,7 @@ static void pcie_init(struct device *dev) dword |= (1 << 30); /* Clear possible errors */ pci_write_config32(dev, 0x04, dword); - /* + /* * 1 is APIC enable * 18 is enable nb to accept A4 interrupt request from SB. */ diff --git a/src/southbridge/amd/rs690/rs690_pcie.c b/src/southbridge/amd/rs690/rs690_pcie.c index 7b09a935d9..5e80849d7f 100644 --- a/src/southbridge/amd/rs690/rs690_pcie.c +++ b/src/southbridge/amd/rs690/rs690_pcie.c @@ -116,37 +116,6 @@ static void pcie_init(struct device *dev) pci_write_config32(dev, 0x04, dword); } -static struct pci_operations lops_pci = { - .set_subsystem = 0, -}; - -static struct device_operations pcie_ops = { - .read_resources = pci_bus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .init = pcie_init, - .scan_bus = pci_scan_bridge, - /*.enable = rs690_enable, */ - .ops_pci = &lops_pci, -}; - -static struct pci_driver pcie_driver __pci_driver = { - .ops = &pcie_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_RS690_PCIE, -}; - -static struct pci_driver pcie_driver_dev7 __pci_driver = { - .ops = &pcie_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_RS690_PCIE_DEV7, -}; -static struct pci_driver pcie_driver_dev8 __pci_driver = { - .ops = &pcie_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_RS690_PCIE_DEV8, -}; - /********************************************************************** **********************************************************************/ static void switching_gpp_configurations(device_t nb_dev, device_t sb_dev) |