diff options
Diffstat (limited to 'src/southbridge/amd/rs690/early_setup.c')
| -rw-r--r-- | src/southbridge/amd/rs690/early_setup.c | 484 |
1 files changed, 484 insertions, 0 deletions
diff --git a/src/southbridge/amd/rs690/early_setup.c b/src/southbridge/amd/rs690/early_setup.c new file mode 100644 index 0000000000..f29d136791 --- /dev/null +++ b/src/southbridge/amd/rs690/early_setup.c @@ -0,0 +1,484 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2008 Carl-Daniel Hailfinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#define NBHTIU_INDEX 0xA8 +#define NBMISC_INDEX 0x60 +#define NBMC_INDEX 0xE8 + +static u32 nb_read_index(device_t dev, u32 index_reg, u32 index) +{ + pci_write_config32(dev, index_reg, index); + return pci_read_config32(dev, index_reg + 0x4); +} + +static void nb_write_index(device_t dev, u32 index_reg, u32 index, u32 data) +{ + pci_write_config32(dev, index_reg, index /* | 0x80 */ ); + pci_write_config32(dev, index_reg + 0x4, data); +} + +static u32 nbmisc_read_index(device_t nb_dev, u32 index) +{ + return nb_read_index((nb_dev), NBMISC_INDEX, (index)); +} + +static void nbmisc_write_index(device_t nb_dev, u32 index, u32 data) +{ + nb_write_index((nb_dev), NBMISC_INDEX, ((index) | 0x80), (data)); +} + +static u32 htiu_read_index(device_t nb_dev, u32 index) +{ + return nb_read_index((nb_dev), NBHTIU_INDEX, (index)); +} + +static void htiu_write_index(device_t nb_dev, u32 index, u32 data) +{ + nb_write_index((nb_dev), NBHTIU_INDEX, ((index) | 0x100), (data)); +} + +static u32 nbmc_read_index(device_t nb_dev, u32 index) +{ + return nb_read_index((nb_dev), NBMC_INDEX, (index)); +} + +static void nbmc_write_index(device_t nb_dev, u32 index, u32 data) +{ + nb_write_index((nb_dev), NBMC_INDEX, ((index) | 1 << 9), (data)); +} + +static void set_htiu_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, + u32 val) +{ + u32 reg_old, reg; + reg = reg_old = htiu_read_index(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + htiu_write_index(nb_dev, reg_pos, reg); + } +} + +static void set_nbmisc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, + u32 val) +{ + u32 reg_old, reg; + reg = reg_old = nbmisc_read_index(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + nbmisc_write_index(nb_dev, reg_pos, reg); + } +} + +static void set_nbcfg_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, + u32 val) +{ + u32 reg_old, reg; + reg = reg_old = pci_read_config32(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + pci_write_config32(nb_dev, reg_pos, reg); + } +} + +static void set_nbcfg_enable_bits_8(device_t nb_dev, u32 reg_pos, u8 mask, + u8 val) +{ + u8 reg_old, reg; + reg = reg_old = pci_read_config8(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + pci_write_config8(nb_dev, reg_pos, reg); + } +} + +static void set_nbmc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, + u32 val) +{ + u32 reg_old, reg; + reg = reg_old = nbmc_read_index(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + nbmc_write_index(nb_dev, reg_pos, reg); + } +} + +/* +* Compliant with CIM_33's ATINB_PrepareInit +*/ +static void get_cpu_rev(void) +{ + u32 eax, ebx, ecx, edx; + __asm__ volatile ("cpuid":"=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx) + :"0"(1)); + printk(BIOS_INFO, "get_cpu_rev EAX=0x%x.\n", eax); + if (eax <= 0xfff) + printk(BIOS_INFO, "CPU Rev is K8_Cx.\n"); + else if (eax <= 0x10fff) + printk(BIOS_INFO, "CPU Rev is K8_Dx.\n"); + else if (eax <= 0x20fff) + printk(BIOS_INFO, "CPU Rev is K8_Ex.\n"); + else if (eax <= 0x40fff) + printk(BIOS_INFO, "CPU Rev is K8_Fx.\n"); + else if (eax == 0x60fb1 || eax == 0x60f81) /*These two IDS are exception, they are G1. */ + printk(BIOS_INFO, "CPU Rev is K8_G1.\n"); + else if (eax <= 0X60FF0) + printk(BIOS_INFO, "CPU Rev is K8_G0.\n"); + else if (eax <= 0x100000) + printk(BIOS_INFO, "CPU Rev is K8_G1.\n"); + else + printk(BIOS_INFO, "CPU Rev is K8_10.\n"); +} + +static u8 get_nb_rev(device_t nb_dev) +{ + u32 reg; + reg = pci_read_config32(nb_dev, 0x00); + if (0x7911 == (reg >> 16)) + return 7; + reg = pci_read_config8(nb_dev, 0x89); /* copy from CIM, can't find in doc */ + if (reg & 0x2) /* check bit1 */ + return 7; + if (reg & 0x1) /* check bit0 */ + return 6; + else + return 5; +} + +/***************************************** +* Compliant with CIM_33's ATINB_HTInit +* Init HT link speed/width for rs690 -- k8 link +*****************************************/ +static void rs690_htinit(void) +{ + /* + * About HT, it has been done in enumerate_ht_chain(). + */ + device_t k8_f0, rs690_f0; + u32 reg; + u8 reg8; + u8 k8_ht_freq; + + k8_f0 = PCI_DEV(0, 0x18, 0); + /************************ + * get k8's ht freq, in k8's function 0, offset 0x88 + * bit11-8, specifics the maximum operation frequency of the link's transmitter clock. + * The link frequency field (Frq) is cleared by cold reset. SW can write a nonzero + * value to this reg, and that value takes effect on the next warm reset or + * LDTSTOP_L disconnect sequence. + * 0000b = 200Mhz + * 0010b = 400Mhz + * 0100b = 600Mhz + * 0101b = 800Mhz + * 0110b = 1Ghz + * 1111b = 1Ghz + ************************/ + reg = pci_read_config32(k8_f0, 0x88); + k8_ht_freq = (reg & 0xf00) >> 8; + printk(BIOS_SPEW, "rs690_htinit k8_ht_freq=%x.\n", k8_ht_freq); + rs690_f0 = PCI_DEV(0, 0, 0); + reg8 = pci_read_config8(rs690_f0, 0x9c); + printk(BIOS_SPEW, "rs690_htinit NB_CFG_Q_F1000_800=%x\n", reg8); + /* For 1000 MHz HT, NB_CFG_Q_F1000_800 bit 0 MUST be set. + * For any other HT frequency, NB_CFG_Q_F1000_800 bit 0 MUST NOT be set. + */ + if (((k8_ht_freq == 0x6) || (k8_ht_freq == 0xf)) && (!(reg8 & 0x1))) { + printk(BIOS_INFO, "rs690_htinit setting bit 0 in NB_CFG_Q_F1000_800 to use 1 GHz HT\n"); + reg8 |= 0x1; + pci_write_config8(rs690_f0, 0x9c, reg8); + } else if ((k8_ht_freq != 0x6) && (k8_ht_freq != 0xf) && (reg8 & 0x1)) { + printk(BIOS_INFO, "rs690_htinit clearing bit 0 in NB_CFG_Q_F1000_800 to not use 1 GHz HT\n"); + reg8 &= ~0x1; + pci_write_config8(rs690_f0, 0x9c, reg8); + } +} + +/******************************************************* +* Optimize k8 with UMA. +* See BKDG_NPT_0F guide for details. +* The processor node is addressed by its Node ID on the HT link and can be +* accessed with a device number in the PCI configuration space on Bus0. +* The Node ID 0 is mapped to Device 24 (0x18), the Node ID 1 is mapped +* to Device 25, and so on. +* The processor implements configuration registers in PCI configuration +* space using the following four headers +* Function0: HT technology configuration +* Function1: Address map configuration +* Function2: DRAM and HT technology Trace mode configuration +* Function3: Miscellaneous configuration +*******************************************************/ +static void k8_optimization(void) +{ + device_t k8_f0, k8_f2, k8_f3; + msr_t msr; + + printk(BIOS_INFO, "k8_optimization()\n"); + k8_f0 = PCI_DEV(0, 0x18, 0); + k8_f2 = PCI_DEV(0, 0x18, 2); + k8_f3 = PCI_DEV(0, 0x18, 3); + + pci_write_config32(k8_f0, 0x90, 0x01700178); /* CIM NPT_Optimization */ + set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 28, 0 << 28); + set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 26 | 1 << 27, + 1 << 26 | 1 << 27); + set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 11, 1 << 11); + set_nbcfg_enable_bits(k8_f0, 0x84, 1 << 11 | 1 << 13 | 1 << 15, 1 << 11 | 1 << 13 | 1 << 15); /* TODO */ + + pci_write_config32(k8_f3, 0x70, 0x51320111); /* CIM NPT_Optimization */ + pci_write_config32(k8_f3, 0x74, 0x50304021); + pci_write_config32(k8_f3, 0x78, 0x08002A00); + if (pci_read_config32(k8_f3, 0xE8) & 0x3<<12) + pci_write_config32(k8_f3, 0x7C, 0x0000211B); /* dual core */ + else + pci_write_config32(k8_f3, 0x7C, 0x0000211C); /* single core */ + set_nbcfg_enable_bits_8(k8_f3, 0xDC, 0xFF, 0x25); + + set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5); + set_nbcfg_enable_bits(k8_f2, 0x94, 0xF << 24, 7 << 24); + set_nbcfg_enable_bits(k8_f2, 0x90, 1 << 10, 1 << 10); + set_nbcfg_enable_bits(k8_f2, 0xA0, 3 << 2, 3 << 2); + set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5); + + msr = rdmsr(0xC001001F); + msr.lo &= ~(1 << 9); + msr.hi &= ~(1 << 4); + wrmsr(0xC001001F, msr); +} + +/***************************************** +* Compliant with CIM_33's ATINB_PCICFG_POR_TABLE +*****************************************/ +static void rs690_por_pcicfg_init(device_t nb_dev) +{ + /* enable PCI Memory Access */ + set_nbcfg_enable_bits_8(nb_dev, 0x04, (u8)(~0xFD), 0x02); + /* Set RCRB Enable */ + set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x1); + /* allow decode of 640k-1MB */ + set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xEF), 0x10); + /* Enable PM2_CNTL(BAR2) IO mapped cfg write access to be broadcast to both NB and SB */ + set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x4); + /* Power Management Register Enable */ + set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x80); + + /* Reg4Ch[1]=1 (APIC_ENABLE) force cpu request with address 0xFECx_xxxx to south-bridge + * Reg4Ch[6]=1 (BMMsgEn) enable BM_Set message generation + * BMMsgEn */ + set_nbcfg_enable_bits_8(nb_dev, 0x4C, (u8)(~0x00), 0x42 | 1); + + /* Reg4Ch[16]=1 (WakeC2En) enable Wake_from_C2 message generation. + * Reg4Ch[18]=1 (P4IntEnable) Enable north-bridge to accept MSI with address 0xFEEx_xxxx from south-bridge */ + set_nbcfg_enable_bits_8(nb_dev, 0x4E, (u8)(~0xFF), 0x05); + /* Reg94h[4:0] = 0x0 P drive strength offset 0 + * Reg94h[6:5] = 0x2 P drive strength additive adjust */ + set_nbcfg_enable_bits_8(nb_dev, 0x94, (u8)(~0x80), 0x40); + + /* Reg94h[20:16] = 0x0 N drive strength offset 0 + * Reg94h[22:21] = 0x2 N drive strength additive adjust */ + set_nbcfg_enable_bits_8(nb_dev, 0x96, (u8)(~0x80), 0x40); + + /* Reg80h[4:0] = 0x0 Termination offset + * Reg80h[6:5] = 0x2 Termination additive adjust */ + set_nbcfg_enable_bits_8(nb_dev, 0x80, (u8)(~0x80), 0x40); + + /* Reg80h[14] = 0x1 Enable receiver termination control */ + set_nbcfg_enable_bits_8(nb_dev, 0x81, (u8)(~0xFF), 0x40); + + /* Reg94h[15] = 0x1 Enables HT transmitter advanced features to be turned on + * Reg94h[14] = 0x1 Enable drive strength control */ + set_nbcfg_enable_bits_8(nb_dev, 0x95, (u8)(~0x3F), 0xC4); + + /* Reg94h[31:29] = 0x7 Enables HT transmitter de-emphasis */ + set_nbcfg_enable_bits_8(nb_dev, 0x97, (u8)(~0x1F), 0xE0); + + /*Reg8Ch[10:9] = 0x3 Enables Gfx Debug BAR, + * force this BAR as mem type in rs690_gfx.c */ + set_nbcfg_enable_bits_8(nb_dev, 0x8D, (u8)(~0xFF), 0x03); + +} + +/***************************************** +* Compliant with CIM_33's ATINB_MCIndex_POR_TABLE +*****************************************/ +static void rs690_por_mc_index_init(device_t nb_dev) +{ + set_nbmc_enable_bits(nb_dev, 0x7A, ~0xFFFFFF80, 0x0000005F); + set_nbmc_enable_bits(nb_dev, 0xD8, ~0x00000000, 0x00600060); + set_nbmc_enable_bits(nb_dev, 0xD9, ~0x00000000, 0x00600060); + set_nbmc_enable_bits(nb_dev, 0xE0, ~0x00000000, 0x00000000); + set_nbmc_enable_bits(nb_dev, 0xE1, ~0x00000000, 0x00000000); + set_nbmc_enable_bits(nb_dev, 0xE8, ~0x00000000, 0x003E003E); + set_nbmc_enable_bits(nb_dev, 0xE9, ~0x00000000, 0x003E003E); +} + +/***************************************** +* Compliant with CIM_33's ATINB_MISCIND_POR_TABLE +* Compliant with CIM_33's MISC_INIT_TBL +*****************************************/ +static void rs690_por_misc_index_init(device_t nb_dev) +{ + /* NB_MISC_IND_WR_EN + IOC_PCIE_CNTL + * Block non-snoop DMA request if PMArbDis is set. + * Set BMSetDis */ + set_nbmisc_enable_bits(nb_dev, 0x0B, ~0xFFFF0000, 0x00000180); + set_nbmisc_enable_bits(nb_dev, 0x01, ~0xFFFFFFFF, 0x00000040); + + /* NBCFG (NBMISCIND 0x0): NB_CNTL - + * HIDE_NB_AGP_CAP ([0], default=1)HIDE + * HIDE_P2P_AGP_CAP ([1], default=1)HIDE + * HIDE_NB_GART_BAR ([2], default=1)HIDE + * AGPMODE30 ([4], default=0)DISABLE + * AGP30ENCHANCED ([5], default=0)DISABLE + * HIDE_AGP_CAP ([8], default=1)ENABLE */ + set_nbmisc_enable_bits(nb_dev, 0x00, ~0xFFFF0000, 0x00000506); /* set bit 10 for MSI */ + + /* NBMISCIND:0x6A[16]= 1 SB link can get a full swing + * set_nbmisc_enable_bits(nb_dev, 0x6A, 0ffffffffh, 000010000); + * NBMISCIND:0x6A[17]=1 Set CMGOOD_OVERRIDE. */ + set_nbmisc_enable_bits(nb_dev, 0x6A, ~0xffffffff, 0x00020000); + + /* NBMISIND:0x40 Bit[8]=1 and Bit[10]=1 following bits are required to set in order to allow LVDS or PWM features to work. */ + set_nbmisc_enable_bits(nb_dev, 0x40, ~0xffffffff, 0x00000500); + + /* NBMISIND:0xC Bit[13]=1 Enable GSM mode for C1e or C3 with pop-up. */ + set_nbmisc_enable_bits(nb_dev, 0x0C, ~0xffffffff, 0x00002000); + + /* Set NBMISIND:0x1F[3] to map NB F2 interrupt pin to INTB# */ + set_nbmisc_enable_bits(nb_dev, 0x1F, ~0xffffffff, 0x00000008); + + /* Compliant with CIM_33's MISC_INIT_TBL, except Hide NB_BAR3_PCIE + * Enable access to DEV8 + * Enable setPower message for all ports + */ + set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6, 1 << 6); + set_nbmisc_enable_bits(nb_dev, 0x0b, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x51, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x53, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x55, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x57, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x59, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x5B, 1 << 20, 1 << 20); + + set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 7, 1 << 7); + set_nbmisc_enable_bits(nb_dev, 0x07, 0x000000f0, 0x30); + /* Disable bus-master trigger event from SB and Enable set_slot_power message to SB */ + set_nbmisc_enable_bits(nb_dev, 0x0B, 0xffffffff, 0x500180); +} + +/***************************************** +* Compliant with CIM_33's ATINB_HTIUNBIND_POR_TABLE +*****************************************/ +static void rs690_por_htiu_index_init(device_t nb_dev) +{ + /* 0xBC: + * Enables GSM mode for C1e or C3 with pop-up + * Prevents AllowLdtStop from being asserted during HT link recovery + * Allows FID cycles to be serviced faster. Needed for RS690 A12. No harm in RS690 A11 */ + set_htiu_enable_bits(nb_dev, 0x05, ~0xffffffff, 0x0BC); + /* 0x4203A202: + * Enables writes to pass in-progress reads + * Enables streaming of CPU writes + * Enables extended write buffer for CPU writes + * Enables additional response buffers + * Enables special reads to pass writes + * Enables decoding of C1e/C3 and FID cycles + * Enables HTIU-display handshake bypass. + * Enables tagging fix */ + set_htiu_enable_bits(nb_dev, 0x06, ~0xFFFFFFFE, 0x4203A202); + + /* Enables byte-write optimization for IOC requests + * Disables delaying STPCLK de-assert during FID sequence. Needed when enhanced UMA arbitration is used. + * Disables upstream system-management delay */ + set_htiu_enable_bits(nb_dev, 0x07, ~0xFFFFFFF9, 0x001); + + /* HTIUNBIND 0x16 [1] = 0x1 Enable crc decoding fix */ + set_htiu_enable_bits(nb_dev, 0x16, ~0xFFFFFFFF, 0x2); +} + +/***************************************** +* Compliant with CIM_33's ATINB_POR_INIT_JMPDI +* Configure RS690 registers to power-on default RPR. +* POR: Power On Reset +* RPR: Register Programming Requirements +*****************************************/ +static void rs690_por_init(device_t nb_dev) +{ + printk(BIOS_INFO, "rs690_por_init\n"); + /* ATINB_PCICFG_POR_TABLE, initialize the values for rs690 PCI Config registers */ + rs690_por_pcicfg_init(nb_dev); + + /* ATINB_MCIND_POR_TABLE */ + rs690_por_mc_index_init(nb_dev); + + /* ATINB_MISCIND_POR_TABLE */ + rs690_por_misc_index_init(nb_dev); + + /* ATINB_HTIUNBIND_POR_TABLE */ + rs690_por_htiu_index_init(nb_dev); + + /* ATINB_CLKCFG_PORT_TABLE */ + /* rs690 A11 SB Link full swing? */ +} + +/* enable CFG access to Dev8, which is the SB P2P Bridge */ +static void enable_rs690_dev8(void) +{ + set_nbmisc_enable_bits(PCI_DEV(0, 0, 0), 0x00, 1 << 6, 1 << 6); +} + + + +/* +* Compliant with CIM_33's AtiNBInitEarlyPost (AtiInitNBBeforePCIInit). +*/ +static void rs690_before_pci_init(void) +{ +} + +/* +* The calling sequence is same as CIM. +*/ +static void rs690_early_setup(void) +{ + device_t nb_dev = PCI_DEV(0, 0, 0); + printk(BIOS_INFO, "rs690_early_setup()\n"); + + /*ATINB_PrepareInit */ + get_cpu_rev(); + switch (get_nb_rev(nb_dev)) { /* PCIEMiscInit */ + case 5: + printk(BIOS_INFO, "NB Revision is A11.\n"); + break; + case 6: + printk(BIOS_INFO, "NB Revision is A12.\n"); + break; + case 7: + printk(BIOS_INFO, "NB Revision is A21.\n"); + break; + } + + k8_optimization(); + rs690_por_init(nb_dev); +} |