diff options
Diffstat (limited to 'src/southbridge/amd/cimx')
| -rw-r--r-- | src/southbridge/amd/cimx/sb800/late.c | 54 |
1 files changed, 9 insertions, 45 deletions
diff --git a/src/southbridge/amd/cimx/sb800/late.c b/src/southbridge/amd/cimx/sb800/late.c index 747d3d63d6..19d7fb5379 100644 --- a/src/southbridge/amd/cimx/sb800/late.c +++ b/src/southbridge/amd/cimx/sb800/late.c @@ -260,51 +260,6 @@ static const struct pci_driver gec_driver __pci_driver = { }; /** - * @brief Enable PCI Bridge - * - * PcibConfig [PM_Reg: EAh], PCIDisable [Bit0] - * 'PCIDisable' set to 0 to enable P2P bridge. - * 'PCIDisable' set to 1 to disable P2P bridge and enable PCI interface pins - * to function as GPIO {GPIO 35:0}. - */ -static void pci_init(device_t dev) -{ - /* PCI Bridge SHOULD be enabled by default according to SB800 rrg, - * but actually was disabled in some platform, so I have to enabled it. - */ - RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 0); -} - - -static struct device_operations pci_ops = { - .read_resources = pci_bus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .init = pci_init, - .scan_bus = pci_scan_bridge, - .reset_bus = pci_bus_reset, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver pci_driver __pci_driver = { - .ops = &pci_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_PCI, -}; - - -struct device_operations bridge_ops = { - .read_resources = pci_bus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .init = 0, - .scan_bus = pci_scan_bridge, - .enable = 0, - .reset_bus = pci_bus_reset, - .ops_pci = &lops_pci, -}; - -/** * South Bridge CIMx ramstage entry point wrapper. */ void sb_Before_Pci_Init(void) @@ -447,6 +402,15 @@ static void sb800_enable(device_t dev) break; case (0x14 << 3) | 4: /* 0:14:4 PCI */ + /* PcibConfig [PM_Reg: EAh], PCIDisable [Bit0] + * 'PCIDisable' set to 0 to enable P2P bridge. + * 'PCIDisable' set to 1 to disable P2P bridge and enable PCI interface pins + * to function as GPIO {GPIO 35:0}. + */ + if (dev->enabled) + RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 0); + else + RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, BIT0); break; case (0x14 << 3) | 6: /* 0:14:6 GEC */ |