summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/amd8111
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/amd/amd8111')
-rw-r--r--src/southbridge/amd/amd8111/amd8111.c14
-rw-r--r--src/southbridge/amd/amd8111/amd8111_ide.c18
2 files changed, 19 insertions, 13 deletions
diff --git a/src/southbridge/amd/amd8111/amd8111.c b/src/southbridge/amd/amd8111/amd8111.c
index e576ea8f0c..2c5d1e80fe 100644
--- a/src/southbridge/amd/amd8111/amd8111.c
+++ b/src/southbridge/amd/amd8111/amd8111.c
@@ -11,6 +11,7 @@ void amd8111_enable(device_t dev)
device_t bus_dev;
unsigned index;
uint16_t reg_old, reg;
+ uint8_t byte;
/* See if we are on the behind the amd8111 pci bridge */
bus_dev = dev->bus->dev;
@@ -38,6 +39,18 @@ void amd8111_enable(device_t dev)
return;
}
}
+
+ if ((dev->vendor == PCI_VENDOR_ID_AMD) &&
+ (dev->device == PCI_DEVICE_ID_AMD_8111_USB2)) {
+ if(!dev->enabled) {
+ byte = pci_read_config8(lpc_dev, 0x47);
+ byte |= (1<<7);
+ pci_write_config8(lpc_dev, 0x47, byte);
+ return;
+ }
+
+ }
+
reg = reg_old = pci_read_config16(lpc_dev, 0x48);
reg &= ~(1 << index);
if (dev->enabled) {
@@ -46,6 +59,7 @@ void amd8111_enable(device_t dev)
if (reg != reg_old) {
pci_write_config16(lpc_dev, 0x48, reg);
}
+
}
struct chip_control southbridge_amd_amd8111_control = {
diff --git a/src/southbridge/amd/amd8111/amd8111_ide.c b/src/southbridge/amd/amd8111/amd8111_ide.c
index 6f8e018fe6..a92274695d 100644
--- a/src/southbridge/amd/amd8111/amd8111_ide.c
+++ b/src/southbridge/amd/amd8111/amd8111_ide.c
@@ -10,6 +10,7 @@ static void ide_init(struct device *dev)
/* Enable ide devices so the linux ide driver will work */
uint16_t word;
+ uint8_t byte;
int enable_a=1, enable_b=1;
word = pci_read_config16(dev, 0x40);
@@ -31,21 +32,12 @@ static void ide_init(struct device *dev)
pci_write_config16(dev, 0x40, word);
- word = 0x0f;
- pci_write_config16(dev, 0x42, word);
- /* The AMD768 has a bug where the BM DMA address must be
- * 256 byte aligned while it is only 16 bytes long.
- * Hard code this to a valid address below 0x1000
- * where automatic port address assignment starts.
- * FIXME: I assume the 8111 does the same thing. We should
- * clarify. stepan@suse.de
- */
- pci_write_config32(dev, 0x20, 0xf01);
+ byte = 0x20 ; // Latency: 64-->32
+ pci_write_config8(dev, 0xd, byte);
- pci_write_config32(dev, 0x48, 0x205e5e5e);
- word = 0x06a;
- pci_write_config16(dev, 0x4c, word);
+ word = 0x0f;
+ pci_write_config16(dev, 0x42, word);
}
static struct device_operations ide_ops = {