diff options
Diffstat (limited to 'src/southbridge/amd/amd8111/amd8111_smbus.h')
-rw-r--r-- | src/southbridge/amd/amd8111/amd8111_smbus.h | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/src/southbridge/amd/amd8111/amd8111_smbus.h b/src/southbridge/amd/amd8111/amd8111_smbus.h new file mode 100644 index 0000000000..b5799666e9 --- /dev/null +++ b/src/southbridge/amd/amd8111/amd8111_smbus.h @@ -0,0 +1,224 @@ +#include <device/smbus_def.h> + +#define SMBGSTATUS 0xe0 +#define SMBGCTL 0xe2 +#define SMBHSTADDR 0xe4 +#define SMBHSTDAT 0xe6 +#define SMBHSTCMD 0xe8 +#define SMBHSTFIFO 0xe9 + +#define SMBUS_TIMEOUT (100*1000*10) +#define SMBUS_STATUS_MASK 0xfbff + +static inline void smbus_delay(void) +{ + outb(0x80, 0x80); +} + +static int smbus_wait_until_ready(unsigned smbus_io_base) +{ + unsigned long loops; + loops = SMBUS_TIMEOUT; + do { + unsigned short val; + smbus_delay(); + val = inw(smbus_io_base + SMBGSTATUS); + if ((val & 0x800) == 0) { + break; + } + if(loops == (SMBUS_TIMEOUT / 2)) { + outw(inw(smbus_io_base + SMBGSTATUS), + smbus_io_base + SMBGSTATUS); + } + } while(--loops); + return loops?0:SMBUS_WAIT_UNTIL_READY_TIMEOUT; +} + +static int smbus_wait_until_done(unsigned smbus_io_base) +{ + unsigned long loops; + loops = SMBUS_TIMEOUT; + do { + unsigned short val; + smbus_delay(); + + val = inw(smbus_io_base + SMBGSTATUS); + if (((val & 0x8) == 0) | ((val & 0x0037) != 0)) { + break; + } + } while(--loops); + return loops?0:SMBUS_WAIT_UNTIL_DONE_TIMEOUT; +} + +static int do_smbus_recv_byte(unsigned smbus_io_base, unsigned device) +{ + unsigned global_status_register; + unsigned byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + } + + /* setup transaction */ + /* disable interrupts */ + outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL); + /* set the device I'm talking too */ + outw(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR); + /* set the command/address... */ + outb(0, smbus_io_base + SMBHSTCMD); + /* set up for a send byte */ + outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x1), smbus_io_base + SMBGCTL); + + /* clear any lingering errors, so the transaction will run */ + /* Do I need to write the bits to a 1 to clear an error? */ + outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS); + + /* set the data word...*/ + outw(0, smbus_io_base + SMBHSTDAT); + + /* start the command */ + outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL); + + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; + } + + global_status_register = inw(smbus_io_base + SMBGSTATUS); + + /* read results of transaction */ + byte = inw(smbus_io_base + SMBHSTDAT) & 0xff; + + if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) { + return SMBUS_ERROR; + } + return byte; +} + +static int do_smbus_send_byte(unsigned smbus_io_base, unsigned device, unsigned value) +{ + unsigned global_status_register; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + } + + /* setup transaction */ + /* disable interrupts */ + outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL); + /* set the device I'm talking too */ + outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR); + /* set the command/address... */ + outb(0, smbus_io_base + SMBHSTCMD); + /* set up for a send byte */ + outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x1), smbus_io_base + SMBGCTL); + + /* clear any lingering errors, so the transaction will run */ + /* Do I need to write the bits to a 1 to clear an error? */ + outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS); + + /* set the data word...*/ + outw(value, smbus_io_base + SMBHSTDAT); + + /* start the command */ + outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL); + + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; + } + global_status_register = inw(smbus_io_base + SMBGSTATUS); + + if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) { + return SMBUS_ERROR; + } + return 0; +} + + +static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address) +{ + unsigned global_status_register; + unsigned byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + } + + /* setup transaction */ + /* disable interrupts */ + outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL); + /* set the device I'm talking too */ + outw(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR); + /* set the command/address... */ + outb(address & 0xFF, smbus_io_base + SMBHSTCMD); + /* set up for a byte data read */ + outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x2), smbus_io_base + SMBGCTL); + + /* clear any lingering errors, so the transaction will run */ + /* Do I need to write the bits to a 1 to clear an error? */ + outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS); + + /* clear the data word...*/ + outw(0, smbus_io_base + SMBHSTDAT); + + /* start the command */ + outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL); + + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; + } + + global_status_register = inw(smbus_io_base + SMBGSTATUS); + + /* read results of transaction */ + byte = inw(smbus_io_base + SMBHSTDAT) & 0xff; + + if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) { + return SMBUS_ERROR; + } + return byte; +} + +static int do_smbus_write_byte(unsigned smbus_io_base, unsigned device, unsigned address, unsigned char val) +{ + unsigned global_status_register; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + } + + /* setup transaction */ + /* disable interrupts */ + outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL); + /* set the device I'm talking too */ + outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR); + outb(address & 0xFF, smbus_io_base + SMBHSTCMD); + /* set up for a byte data write */ /* FIXME */ + outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x2), smbus_io_base + SMBGCTL); + /* clear any lingering errors, so the transaction will run */ + /* Do I need to write the bits to a 1 to clear an error? */ + outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS); + + /* write the data word...*/ + outw(val, smbus_io_base + SMBHSTDAT); + + /* start the command */ + outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; + } + global_status_register = inw(smbus_io_base + SMBGSTATUS); + + if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) { + return SMBUS_ERROR; + } + return 0; +} + |