diff options
Diffstat (limited to 'src/soc')
21 files changed, 0 insertions, 3241 deletions
diff --git a/src/soc/imgtec/Kconfig b/src/soc/imgtec/Kconfig deleted file mode 100644 index 18c6ba1dfd..0000000000 --- a/src/soc/imgtec/Kconfig +++ /dev/null @@ -1,2 +0,0 @@ -# Load all chipsets -source "src/soc/imgtec/*/Kconfig" diff --git a/src/soc/imgtec/pistachio/Kconfig b/src/soc/imgtec/pistachio/Kconfig deleted file mode 100644 index 30d7bee2c0..0000000000 --- a/src/soc/imgtec/pistachio/Kconfig +++ /dev/null @@ -1,34 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2014 Imagination Technologies -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; version 2 of -# the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -config CPU_IMGTEC_PISTACHIO - select ARCH_MIPS - select ARCH_BOOTBLOCK_MIPS - select ARCH_VERSTAGE_MIPS - select ARCH_ROMSTAGE_MIPS - select ARCH_RAMSTAGE_MIPS - select HAVE_UART_SPECIAL - select GENERIC_GPIO_LIB - select UART_OVERRIDE_REFCLK - bool - -if CPU_IMGTEC_PISTACHIO - -config BOOTBLOCK_CPU_INIT - string - default "soc/imgtec/pistachio/bootblock.c" - -endif diff --git a/src/soc/imgtec/pistachio/Makefile.inc b/src/soc/imgtec/pistachio/Makefile.inc deleted file mode 100644 index 9392d302a2..0000000000 --- a/src/soc/imgtec/pistachio/Makefile.inc +++ /dev/null @@ -1,48 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2014 Imagination Technologies -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; version 2 of -# the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -ifeq ($(CONFIG_CPU_IMGTEC_PISTACHIO),y) - -# We enable CBFS_SPI_WRAPPER for Pistachio targets. -bootblock-y += clocks.c -bootblock-y += spi.c -romstage-y += spi.c -ramstage-y += spi.c - -bootblock-y += uart.c -romstage-y += uart.c -ramstage-y += uart.c - -bootblock-y += monotonic_timer.c - -ramstage-y += monotonic_timer.c -ramstage-y += soc.c -ramstage-y += reset.c - -romstage-y += cbmem.c -romstage-y += ddr2_init.c -romstage-y += ddr3_init.c -romstage-y += romstage.c -romstage-y += monotonic_timer.c - -CPPFLAGS_common += -Isrc/soc/imgtec/pistachio/include/ - -# Create a complete bootblock which will start up the system -$(objcbfs)/bootblock.bin: $(objcbfs)/bootblock.raw.bin $(BIMGTOOL) - @printf " BIMGTOOL $(subst $(obj)/,,$(@))\n" - $(BIMGTOOL) $< $@ $(call loadaddr,bootblock) - -endif diff --git a/src/soc/imgtec/pistachio/bootblock.c b/src/soc/imgtec/pistachio/bootblock.c deleted file mode 100644 index ac4a74070c..0000000000 --- a/src/soc/imgtec/pistachio/bootblock.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/cpu.h> -#include <arch/mmu.h> -#include <assert.h> -#include <stdint.h> -#include <symbols.h> - -static void bootblock_cpu_init(void) -{ - uint32_t cause; - - /* - * Make sure the count register is counting by clearing the "Disable - * Counter" bit, in case it is set. - */ - cause = read_c0_cause(); - if (cause & C0_CAUSE_DC) - write_c0_cause(cause & ~(C0_CAUSE_DC)); - - /* And make sure that it starts from zero. */ - write_c0_count(0); -} - -static void bootblock_mmu_init(void) -{ - uint32_t null_guard_size = 1 * MiB; - uint32_t dram_base, dram_size; - - write_c0_wired(0); - - dram_base = (uint32_t)_dram; - dram_size = CONFIG_DRAM_SIZE_MB * MiB; - - /* - * To be able to catch NULL pointer dereference attempts, lets not map - * memory close to zero. - */ - if (dram_base < null_guard_size) { - dram_base += null_guard_size; - dram_size -= null_guard_size; - } - assert(!identity_map((uint32_t)_sram, REGION_SIZE(sram), - C0_ENTRYLO_COHERENCY_WB)); - assert(!identity_map(dram_base, dram_size, C0_ENTRYLO_COHERENCY_WB)); - assert(!identity_map((uint32_t)_soc_registers, - REGION_SIZE(soc_registers), C0_ENTRYLO_COHERENCY_UC)); -} diff --git a/src/soc/imgtec/pistachio/cbmem.c b/src/soc/imgtec/pistachio/cbmem.c deleted file mode 100644 index 92bc1ce868..0000000000 --- a/src/soc/imgtec/pistachio/cbmem.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <cbmem.h> -#include <stdlib.h> -#include <symbols.h> - -void *cbmem_top_chipset(void) -{ - return _dram + (CONFIG_DRAM_SIZE_MB << 20); -} diff --git a/src/soc/imgtec/pistachio/clocks.c b/src/soc/imgtec/pistachio/clocks.c deleted file mode 100644 index aa54ebc43e..0000000000 --- a/src/soc/imgtec/pistachio/clocks.c +++ /dev/null @@ -1,513 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/mmio.h> -#include <assert.h> -#include <delay.h> -#include <soc/clocks.h> -#include <timer.h> - -/* Definitions for PLL enable */ -#define PISTACHIO_CLOCK_SWITCH 0xB8144200 - -#define SYS_EXTERN_PLL_BYPASS_MASK 0x00002000 -#define SYS_PLL_CTRL4_ADDR 0xB8144048 -#define SYS_INTERNAL_PLL_BYPASS_MASK 0x10000000 -#define SYS_PLL_PD_CTRL_ADDR 0xB8144044 -#define SYS_PLL_PD_CTRL_PD_MASK 0x00000039 -#define SYS_PLL_DACPD_ADDR 0xB8144044 -#define SYS_PLL_DACPD_MASK 0x00000002 -#define SYS_PLL_DSMPD_ADDR 0xB8144044 -#define SYS_PLL_DSMPD_MASK 0x00000004 - -#define MIPS_EXTERN_PLL_BYPASS_MASK 0x00000002 -#define MIPS_PLL_CTRL2_ADDR 0xB8144008 -#define MIPS_INTERNAL_PLL_BYPASS_MASK 0x10000000 -#define MIPS_PLL_PD_CTRL_ADDR 0xB8144004 -#define MIPS_PLL_PD_CTRL_PD_MASK 0x0D000000 -#define MIPS_PLL_DSMPD_ADDR 0xB8144004 -#define MIPS_PLL_DSMPD_MASK 0x02000000 - -/* Definitions for PLL dividers */ -#define SYS_PLL_POSTDIV_ADDR 0xB8144040 -#define SYS_PLL_POSTDIV1_MASK 0x07000000 -#define SYS_PLL_POSTDIV1_SHIFT 24 -#define SYS_PLL_POSTDIV2_MASK 0x38000000 -#define SYS_PLL_POSTDIV2_SHIFT 27 -#define SYS_PLL_STATUS_ADDR 0xB8144038 -#define SYS_PLL_STATUS_LOCK_MASK 0x00000001 - -#define SYS_PLL_REFDIV_ADDR 0xB814403C -#define SYS_PLL_REFDIV_MASK 0x0000003F -#define SYS_PLL_REFDIV_SHIFT 0 -#define SYS_PLL_FEEDBACK_ADDR 0xB814403C -#define SYS_PLL_FEEDBACK_MASK 0x0003FFC0 -#define SYS_PLL_FEEDBACK_SHIFT 6 - -#define MIPS_PLL_POSTDIV_ADDR 0xB8144004 -#define MIPS_PLL_POSTDIV1_MASK 0x001C0000 -#define MIPS_PLL_POSTDIV1_SHIFT 18 -#define MIPS_PLL_POSTDIV2_MASK 0x00E00000 -#define MIPS_PLL_POSTDIV2_SHIFT 21 -#define MIPS_PLL_STATUS_ADDR 0xB8144000 -#define MIPS_PLL_STATUS_LOCK_MASK 0x00000001 - -#define MIPS_REFDIV_ADDR 0xB8144004 -#define MIPS_REFDIV_MASK 0x0000003F -#define MIPS_REFDIV_SHIFT 0 -#define MIPS_FEEDBACK_ADDR 0xB8144004 -#define MIPS_FEEDBACK_MASK 0x0003FFC0 -#define MIPS_FEEDBACK_SHIFT 6 - -/* Definitions for system clock setup */ -#define SYSCLKINTERNAL_CTRL_ADDR 0xB8144244 -#define SYSCLKINTERNAL_MASK 0X00000007 - -/* Definitions for MIPS clock setup */ -#define MIPSCLKINTERNAL_CTRL_ADDR 0xB8144204 -#define MIPSCLKINTERNAL_MASK 0x00000003 -#define MIPSCLKOUT_CTRL_ADDR 0xB8144208 -#define MIPSCLKOUT_MASK 0x000000FF - -/* Peripheral Clock gate reg */ -#define MIPS_CLOCK_GATE_ADDR 0xB8144900 -#define RPU_CLOCK_GATE_ADDR 0xB8144904 -#define MIPS_CLOCK_GATE_ALL_ON 0x3fff -#define RPU_CLOCK_GATE_ALL_OFF 0x0 - -/* Definitions for USB clock setup */ -#define USBPHYCLKOUT_CTRL_ADDR 0xB814422C -#define USBPHYCLKOUT_MASK 0X0000003F -#define USBPHYCONTROL1_ADDR 0xB8149004 -#define USBPHYCONTROL1_FSEL_SHIFT 2 -#define USBPHYCONTROL1_FSEL_MASK 0x1C -#define USBPHYSTRAPCTRL_ADDR 0xB8149010 -#define USBPHYSTRAPCTRL_REFCLKSEL_SHIFT 4 -#define USBPHYSTRAPCTRL_REFCLKSEL_MASK 0x30 -#define USBPHYSTATUS_ADDR 0xB8149014 -#define USBPHYSTATUS_RX_PHY_CLK_MASK 0x200 -#define USBPHYSTATUS_RX_UTMI_CLK_MASK 0x100 -#define USBPHYSTATUS_VBUS_FAULT_MASK 0x80 - -/* Definitions for UART0/1 setup */ -#define UART0CLKINTERNAL_CTRL_ADDR 0xB8144234 -#define UART0CLKINTERNAL_MASK 0x00000007 -#define UART0CLKOUT_CTRL_ADDR 0xB8144238 -#define UART0CLKOUT_MASK 0x000003FF -#define UART1CLKINTERNAL_CTRL_ADDR 0xB814423C -#define UART1CLKINTERNAL_MASK 0x00000007 -#define UART1CLKOUT_CTRL_ADDR 0xB8144240 -#define UART1CLKOUT_MASK 0x000003FF - -/* Definitions for I2C setup */ -#define I2CCLKDIV1_CTRL_ADDR(i) (0xB8144800 + 0x013C + (2*(i)*4)) -#define I2CCLKDIV1_MASK 0x0000007F -#define I2CCLKOUT_CTRL_ADDR(i) (0xB8144800 + 0x0140 + (2*(i)*4)) -#define I2CCLKOUT_MASK 0x0000007F - -/* Definitions for ROM clock setup */ -#define ROMCLKOUT_CTRL_ADDR 0xB814490C -#define ROMCLKOUT_MASK 0x0000007F - -/* Definitions for ETH clock setup */ -#define ENETCLKMUX_MASK 0x00004000 -#define ENETCLKDIV_CTRL_ADDR 0xB8144230 -#define ENETCLKDIV_MASK 0x0000003F - -/* Definitions for timeout values */ -#define PLL_TIMEOUT_VALUE_US 20000 -#define USB_TIMEOUT_VALUE_US 200000 -#define SYS_CLK_LOCK_DELAY 3 - -struct pll_parameters { - u32 external_bypass_mask; - u32 ctrl_addr; - u32 internal_bypass_mask; - u32 power_down_ctrl_addr; - u32 power_down_ctrl_mask; - u32 dacpd_addr; - u32 dacpd_mask; - u32 dsmpd_addr; - u32 dsmpd_mask; - u32 postdiv_addr; - u32 postdiv1_shift; - u32 postdiv1_mask; - u32 postdiv2_shift; - u32 postdiv2_mask; - u32 status_addr; - u32 status_lock_mask; - u32 refdivider; - u32 refdiv_addr; - u32 refdiv_shift; - u32 refdiv_mask; - u32 feedback; - u32 feedback_addr; - u32 feedback_shift; - u32 feedback_mask; -}; - -enum plls { - SYS_PLL = 0, - MIPS_PLL = 1 -}; - -static struct pll_parameters pll_params[] = { - [SYS_PLL] = { - .external_bypass_mask = SYS_EXTERN_PLL_BYPASS_MASK, - .ctrl_addr = SYS_PLL_CTRL4_ADDR, - .internal_bypass_mask = SYS_INTERNAL_PLL_BYPASS_MASK, - .power_down_ctrl_addr = SYS_PLL_PD_CTRL_ADDR, - .power_down_ctrl_mask = SYS_PLL_PD_CTRL_PD_MASK, - /* Noise cancellation */ - .dacpd_addr = SYS_PLL_DACPD_ADDR, - .dacpd_mask = SYS_PLL_DACPD_MASK, - .dsmpd_addr = SYS_PLL_DSMPD_ADDR, - /* 0 - Integer mode - * SYS_PLL_DSMPD_MASK - Fractional mode - */ - .dsmpd_mask = 0, - .postdiv_addr = SYS_PLL_POSTDIV_ADDR, - .postdiv1_shift = SYS_PLL_POSTDIV1_SHIFT, - .postdiv1_mask = SYS_PLL_POSTDIV1_MASK, - .postdiv2_shift = SYS_PLL_POSTDIV2_SHIFT, - .postdiv2_mask = SYS_PLL_POSTDIV2_MASK, - .status_addr = SYS_PLL_STATUS_ADDR, - .status_lock_mask = SYS_PLL_STATUS_LOCK_MASK, - .refdivider = 0, /* Not defined yet */ - .refdiv_addr = SYS_PLL_REFDIV_ADDR, - .refdiv_shift = SYS_PLL_REFDIV_SHIFT, - .refdiv_mask = SYS_PLL_REFDIV_MASK, - .feedback = 0, /* Not defined yet */ - .feedback_addr = SYS_PLL_FEEDBACK_ADDR, - .feedback_shift = SYS_PLL_FEEDBACK_SHIFT, - .feedback_mask = SYS_PLL_FEEDBACK_MASK - }, - - [MIPS_PLL] = { - .external_bypass_mask = MIPS_EXTERN_PLL_BYPASS_MASK, - .ctrl_addr = MIPS_PLL_CTRL2_ADDR, - .internal_bypass_mask = MIPS_INTERNAL_PLL_BYPASS_MASK, - .power_down_ctrl_addr = MIPS_PLL_PD_CTRL_ADDR, - .power_down_ctrl_mask = MIPS_PLL_PD_CTRL_PD_MASK, - .dacpd_addr = 0, - .dacpd_mask = 0, - .dsmpd_addr = MIPS_PLL_DSMPD_ADDR, - .dsmpd_mask = MIPS_PLL_DSMPD_MASK, - .postdiv_addr = MIPS_PLL_POSTDIV_ADDR, - .postdiv1_shift = MIPS_PLL_POSTDIV1_SHIFT, - .postdiv1_mask = MIPS_PLL_POSTDIV1_MASK, - .postdiv2_shift = MIPS_PLL_POSTDIV2_SHIFT, - .postdiv2_mask = MIPS_PLL_POSTDIV2_MASK, - .status_addr = MIPS_PLL_STATUS_ADDR, - .status_lock_mask = MIPS_PLL_STATUS_LOCK_MASK, - .refdivider = 0, /* Not defined yet */ - .refdiv_addr = MIPS_REFDIV_ADDR, - .refdiv_shift = MIPS_REFDIV_SHIFT, - .refdiv_mask = MIPS_REFDIV_MASK, - .feedback = 0, /* Not defined yet */ - .feedback_addr = MIPS_FEEDBACK_ADDR, - .feedback_shift = MIPS_FEEDBACK_SHIFT, - .feedback_mask = MIPS_FEEDBACK_MASK - } -}; - -static int pll_setup(struct pll_parameters *param, u8 divider1, u8 divider2) -{ - u32 reg; - struct stopwatch sw; - - /* Check input parameters */ - assert(!((divider1 << param->postdiv1_shift) & - ~(param->postdiv1_mask))); - assert(!((divider2 << param->postdiv2_shift) & - ~(param->postdiv2_mask))); - - /* Temporary bypass PLL (select XTAL as clock input) */ - reg = read32_x(PISTACHIO_CLOCK_SWITCH); - reg &= ~(param->external_bypass_mask); - write32_x(PISTACHIO_CLOCK_SWITCH, reg); - - /* Un-bypass PLL's internal bypass */ - reg = read32_x(param->ctrl_addr); - reg &= ~(param->internal_bypass_mask); - write32_x(param->ctrl_addr, reg); - - /* Disable power down */ - reg = read32_x(param->power_down_ctrl_addr); - reg &= ~(param->power_down_ctrl_mask); - write32_x(param->power_down_ctrl_addr, reg); - - /* Noise cancellation */ - if (param->dacpd_addr) { - reg = read32_x(param->dacpd_addr); - reg &= ~(param->dacpd_mask); - write32_x(param->dacpd_addr, reg); - } - - /* Functional mode */ - if (param->dsmpd_addr) { - reg = read32_x(param->dsmpd_addr); - reg &= ~(param->dsmpd_mask); - write32_x(param->dsmpd_addr, reg); - } - - if (param->feedback_addr) { - assert(!((param->feedback << param->feedback_shift) & - ~(param->feedback_mask))); - reg = read32_x(param->feedback_addr); - reg &= ~(param->feedback_mask); - reg |= (param->feedback << param->feedback_shift) & - param->feedback_mask; - write32_x(param->feedback_addr, reg); - } - - if (param->refdiv_addr) { - assert(!((param->refdivider << param->refdiv_shift) & - ~(param->refdiv_mask))); - reg = read32_x(param->refdiv_addr); - reg &= ~(param->refdiv_mask); - reg |= (param->refdivider << param->refdiv_shift) & - param->refdiv_mask; - write32_x(param->refdiv_addr, reg); - } - - /* Read postdivider register value */ - reg = read32_x(param->postdiv_addr); - /* Set divider 1 */ - reg &= ~(param->postdiv1_mask); - reg |= (divider1 << param->postdiv1_shift) & - param->postdiv1_mask; - /* Set divider 2 */ - reg &= ~(param->postdiv2_mask); - reg |= (divider2 << param->postdiv2_shift) & - param->postdiv2_mask; - /* Write back to register */ - write32_x(param->postdiv_addr, reg); - - /* Waiting for PLL to lock*/ - stopwatch_init_usecs_expire(&sw, PLL_TIMEOUT_VALUE_US); - while (!(read32_x(param->status_addr) & param->status_lock_mask)) { - if (stopwatch_expired(&sw)) - return PLL_TIMEOUT; - } - - /* Start using PLL */ - reg = read32_x(PISTACHIO_CLOCK_SWITCH); - reg |= param->external_bypass_mask; - write32_x(PISTACHIO_CLOCK_SWITCH, reg); - - return CLOCKS_OK; -} - -int sys_pll_setup(u8 divider1, u8 divider2, u8 refdivider, u32 feedback) -{ - pll_params[SYS_PLL].refdivider = refdivider; - pll_params[SYS_PLL].feedback = feedback; - return pll_setup(&(pll_params[SYS_PLL]), divider1, divider2); -} - -int mips_pll_setup(u8 divider1, u8 divider2, u8 refdivider, u32 feedback) -{ - pll_params[MIPS_PLL].refdivider = refdivider; - pll_params[MIPS_PLL].feedback = feedback; - return pll_setup(&(pll_params[MIPS_PLL]), divider1, divider2); -} - -/* - * uart1_clk_setup: sets up clocks for UART1 - * divider1: 3-bit divider value - * divider2: 10-bit divider value - */ -void uart1_clk_setup(u8 divider1, u16 divider2) -{ - u32 reg; - - /* Check input parameters */ - assert(!(divider1 & ~(UART1CLKINTERNAL_MASK))); - assert(!(divider2 & ~(UART1CLKOUT_MASK))); - - /* Set divider 1 */ - reg = read32_x(UART1CLKINTERNAL_CTRL_ADDR); - reg &= ~UART1CLKINTERNAL_MASK; - reg |= divider1 & UART1CLKINTERNAL_MASK; - write32_x(UART1CLKINTERNAL_CTRL_ADDR, reg); - - /* Set divider 2 */ - reg = read32_x(UART1CLKOUT_CTRL_ADDR); - reg &= ~UART1CLKOUT_MASK; - reg |= divider2 & UART1CLKOUT_MASK; - write32_x(UART1CLKOUT_CTRL_ADDR, reg); -} - -/* - * i2c_clk_setup: sets up clocks for I2C - * divider1: 7-bit divider value - * divider2: 7-bit divider value - */ -void i2c_clk_setup(u8 divider1, u16 divider2, u8 interface) -{ - u32 reg; - - /* Check input parameters */ - assert(!(divider1 & ~(I2CCLKDIV1_MASK))); - assert(!(divider2 & ~(I2CCLKOUT_MASK))); - assert(interface < 4); - /* Set divider 1 */ - reg = read32_x(I2CCLKDIV1_CTRL_ADDR(interface)); - reg &= ~I2CCLKDIV1_MASK; - reg |= divider1 & I2CCLKDIV1_MASK; - write32_x(I2CCLKDIV1_CTRL_ADDR(interface), reg); - - /* Set divider 2 */ - reg = read32_x(I2CCLKOUT_CTRL_ADDR(interface)); - reg &= ~I2CCLKOUT_MASK; - reg |= divider2 & I2CCLKOUT_MASK; - write32_x(I2CCLKOUT_CTRL_ADDR(interface), reg); -} - -/* system_clk_setup: sets up the system (peripheral) clock */ -void system_clk_setup(u8 divider) -{ - u32 reg; - - /* Check input parameters */ - assert(!(divider & ~(SYSCLKINTERNAL_MASK))); - - /* Set system clock divider */ - reg = read32_x(SYSCLKINTERNAL_CTRL_ADDR); - reg &= ~SYSCLKINTERNAL_MASK; - reg |= divider & SYSCLKINTERNAL_MASK; - write32_x(SYSCLKINTERNAL_CTRL_ADDR, reg); - - /* Small delay to cover a maximum lock time of 1500 cycles */ - udelay(SYS_CLK_LOCK_DELAY); -} - -void mips_clk_setup(u8 divider1, u8 divider2) -{ - u32 reg; - - /* Check input parameters */ - assert(!(divider1 & ~(MIPSCLKINTERNAL_MASK))); - assert(!(divider2 & ~(MIPSCLKOUT_MASK))); - - /* Set divider 1 */ - reg = read32_x(MIPSCLKINTERNAL_CTRL_ADDR); - reg &= ~MIPSCLKINTERNAL_MASK; - reg |= divider1 & MIPSCLKINTERNAL_MASK; - write32_x(MIPSCLKINTERNAL_CTRL_ADDR, reg); - - /* Set divider 2 */ - reg = read32_x(MIPSCLKOUT_CTRL_ADDR); - reg &= ~MIPSCLKOUT_MASK; - reg |= divider2 & MIPSCLKOUT_MASK; - write32_x(MIPSCLKOUT_CTRL_ADDR, reg); -} - -/* usb_clk_setup: sets up USB clock */ -int usb_clk_setup(u8 divider, u8 refclksel, u8 fsel) -{ - u32 reg; - struct stopwatch sw; - - /* Check input parameters */ - assert(!(divider & ~(USBPHYCLKOUT_MASK))); - assert(!((refclksel << USBPHYSTRAPCTRL_REFCLKSEL_SHIFT) & - ~(USBPHYSTRAPCTRL_REFCLKSEL_MASK))); - assert(!((fsel << USBPHYCONTROL1_FSEL_SHIFT) & - ~(USBPHYCONTROL1_FSEL_MASK))); - - /* Set USB divider */ - reg = read32_x(USBPHYCLKOUT_CTRL_ADDR); - reg &= ~USBPHYCLKOUT_MASK; - reg |= divider & USBPHYCLKOUT_MASK; - write32_x(USBPHYCLKOUT_CTRL_ADDR, reg); - - /* Set REFCLKSEL */ - reg = read32_x(USBPHYSTRAPCTRL_ADDR); - reg &= ~USBPHYSTRAPCTRL_REFCLKSEL_MASK; - reg |= (refclksel << USBPHYSTRAPCTRL_REFCLKSEL_SHIFT) & - USBPHYSTRAPCTRL_REFCLKSEL_MASK; - write32_x(USBPHYSTRAPCTRL_ADDR, reg); - - /* Set FSEL */ - reg = read32_x(USBPHYCONTROL1_ADDR); - reg &= ~USBPHYCONTROL1_FSEL_MASK; - reg |= (fsel << USBPHYCONTROL1_FSEL_SHIFT) & - USBPHYCONTROL1_FSEL_MASK; - write32_x(USBPHYCONTROL1_ADDR, reg); - - /* Waiting for USB clock status */ - stopwatch_init_usecs_expire(&sw, USB_TIMEOUT_VALUE_US); - while (1) { - reg = read32_x(USBPHYSTATUS_ADDR); - if (reg & USBPHYSTATUS_VBUS_FAULT_MASK) - return USB_VBUS_FAULT; - if (stopwatch_expired(&sw)) - return USB_TIMEOUT; - /* Check if USB is set up properly */ - if ((reg & USBPHYSTATUS_RX_PHY_CLK_MASK) && - (reg & USBPHYSTATUS_RX_UTMI_CLK_MASK)) - break; - } - - return CLOCKS_OK; -} - -void rom_clk_setup(u8 divider) -{ - u32 reg; - - /* Check input parameter */ - assert(!(divider & ~(ROMCLKOUT_MASK))); - - /* Set ROM divider */ - reg = read32_x(ROMCLKOUT_CTRL_ADDR); - reg &= ~ROMCLKOUT_MASK; - reg |= divider & ROMCLKOUT_MASK; - write32_x(ROMCLKOUT_CTRL_ADDR, reg); -} - -void eth_clk_setup(u8 mux, u8 divider) -{ - - u32 reg; - - /* Check input parameters */ - assert(!(divider & ~(ENETCLKDIV_MASK))); - /* This can be either 0 or 1, selecting between - * ENET and system clock as clocksource */ - assert(!(mux & ~(0x1))); - - /* Set ETH divider */ - reg = read32_x(ENETCLKDIV_CTRL_ADDR); - reg &= ~ENETCLKDIV_MASK; - reg |= divider & ENETCLKDIV_MASK; - write32_x(ENETCLKDIV_CTRL_ADDR, reg); - - /* Select source */ - if (mux) { - reg = read32_x(PISTACHIO_CLOCK_SWITCH); - reg |= ENETCLKMUX_MASK; - write32_x(PISTACHIO_CLOCK_SWITCH, reg); - } -} - -void setup_clk_gate_defaults(void) -{ - write32_x(MIPS_CLOCK_GATE_ADDR, MIPS_CLOCK_GATE_ALL_ON); - write32_x(RPU_CLOCK_GATE_ADDR, RPU_CLOCK_GATE_ALL_OFF); -} diff --git a/src/soc/imgtec/pistachio/ddr2_init.c b/src/soc/imgtec/pistachio/ddr2_init.c deleted file mode 100644 index 39b553df24..0000000000 --- a/src/soc/imgtec/pistachio/ddr2_init.c +++ /dev/null @@ -1,443 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/mmio.h> -#include <soc/ddr_init.h> -#include <soc/ddr_private_reg.h> -#include <stdint.h> - -#define BL8 0 - -/* - * Configuration for the Winbond W972GG6JB-25 part using - * Synopsys DDR uMCTL and DDR Phy - */ -int init_ddr2(void) -{ - - /* - * Reset the AXI bridge and DDR Controller in case any spurious - * writes have already happened to DDR - note must be done together, - * not sequentially - */ - write32_x(TOPLEVEL_REGS + DDR_CTRL_OFFSET, 0x00000000); - write32_x(TOPLEVEL_REGS + DDR_CTRL_OFFSET, 0x0000000F); - /* - * Dummy read to fence the access between the reset above - * and thw DDR controller writes below - */ - read32_x(TOPLEVEL_REGS + DDR_CTRL_OFFSET); - /* Timings for 400MHz - * therefore 200MHz (5ns) uMCTL (Internal) Rate - */ - /* TOGCNT1U: Toggle Counter 1U Register: 1us 200h C8h */ - write32_x(DDR_PCTL + DDR_PCTL_TOGCNT1U_OFFSET, 0x000000C8); - /* TINIT: t_init Timing Register: at least 200us 200h C8h */ - write32_x(DDR_PCTL + DDR_PCTL_TINIT_OFFSET, 0x000000C8); - /* TRSTH: Reset High Time Register DDR3 ONLY */ - write32_x(DDR_PCTL + DDR_PCTL_TRSTH_OFFSET, 0x00000000); - /* TOGCNT100N: Toggle Counter 100N Register: 20d, 14h*/ - write32_x(DDR_PCTL + DDR_PCTL_TOGG_CNTR_100NS_OFFSET, 0x00000014); - /* DTUAWDT DTU Address Width Register - * 1:0 column_addr_width Def 10 - 7 3 10 bits - * 4:3 bank_addr_width Def 3 - 2 1 3 bits (8 bank) - * 7:6 row_addr_width Def 14 - 13 1 3 bits - * 10:9 number_ranks Def 1 - 1 0 0 1 Rank - */ - write32_x(DDR_PCTL + DDR_PCTL_DTUAWDT_OFFSET, 0x0000004B); - /* MCFG - * 0 BL 0 = 4 1 = 8 - * 1 RDRIMM 0 - * 2 BL8 Burst Terminate 0 - * 3 2T = 0 - * 4 Multi Rank 0 - * 5 DDR3 En 0 - * 6 LPDDR S4 En - * 7 BST En 0, 1 for LPDDR2/3 - * 15:8 Power down Idle, passed by argument - * 16 Power Down Type, passed by argument - * 17 Power Down Exit 0 = slow, 1 = fast, pba - * 19:18 tFAW 45ns = 9 clk 5*2 -1 1h - * 21:20 mDDR/LPDDR2 BL 0 - * 23:22 mDDR/LPDDR2 Enable 0 - * 31:24 mDDR/LPDDR2/3 Dynamic Clock Stop 0 - */ - write32_x(DDR_PCTL + DDR_PCTL_MCFG_OFFSET, - 0x00060000 | (BL8 ? 0x1 : 0x0)); - /* MCFG1: Memory Configuration-1 Register - * c7:0 sr_idle Self Refresh Idle Entery 32 * nclks 14h, set 0 for BUB - * 10:8 Fine tune MCFG.19:18 -1 - * 15:11 Reserved - * 23:16 Hardware Idle Period NA 0 - * 30:24 Reserved - * 31 c_active_in_pin exit auto clk stop NA 0 - */ - write32_x(DDR_PCTL + DDR_PCTL_MCFG1_OFFSET, 0x00000100); - /* DCR DRAM Config - * 2:0 SDRAM => DDR2 2 - * 3 DDR 8 Bank 1 - * 6:4 Primary DQ DDR3 Only 0 - * 7 Multi-Purpose Register DDR3 Only 0 - * 9:8 DDRTYPE LPDDR2 00 - * 26:10 Reserved - * 27 NOSRA No Simultaneous Rank Access 0 - * 28 DDR 2T 0 - * 29 UDIMM NA 0 - * 30 RDIMM NA 0 - * 31 TPD LPDDR2 0 - */ - write32_x(DDR_PHY + DDRPHY_DCR_OFFSET, 0x0000000A); - /* Generate to use with PHY and PCTL - * MR0 : MR Register, bits 12:0 imported dfrom MR - * 2:0 BL 8 011 - * 3 BT Sequential 0 Interleaved 1 = 0 - * 6:4 CL 6 - * 7 TM Normal 0 - * 8 DLL Reset 1 (self Clearing) - * 11:9 WR 15 ns 6 (101) - * 12 PD Slow 1 Fast 0 0 - * 15:13 RSVD RSVD - * 31:16 Reserved - */ - write32_x(DDR_PHY + DDRPHY_MR_OFFSET, 0x00000B62 | (BL8 ? 0x1 : 0x0)); - /* MR1 : EMR Register - * Generate to use with PHY and PCTL - * 0 DE DLL Enable 0 Disable 1 - * 1 DIC Output Driver Imp Ctl 0 Full, 1 Half - * 6,2 ODT 0 Disable, 1 75R, 2 150R, 3 50R; LSB: 2, MSB: 6 - * 5:3 AL = 0 - * 9:7 OCD = 0 - * 10 DQS 0 diff, 1 single = 0 - * 11 RDQS NA 0 - * 12 QOFF Normal mode 0 - * 15:13 RSVD - * 31:16 Reserved - */ - write32_x(DDR_PHY + DDRPHY_EMR_OFFSET, 0x00000044); - /* MR2 : EMR2 Register - * Generate to use with PHY and PCTL - * 2:0 PASR, NA 000 - * 3 DDC NA 0 - * 6:4 RSVD - * 7 SFR 0 - * 15:8 RSVD - * 31:16 Reserved - */ - write32_x(DDR_PHY + DDRPHY_EMR2_OFFSET, 0x00000000); - /* DSGCR - * 0 PUREN Def 1 - * 1 BDISEN Def 1 - * 2 ZUEN Def 1 - * 3 LPIOPD DEf 1 0 - * 4 LPDLLPD DEf 1 0 - * 7:5 DQSGX DQS Extention set to 1 - advised by Synopsys - * 10:8 DQSGE DQS Early Gate - 1 - advised by Sysnopsys - * 11 NOBUB No Bubbles, adds latency 1 - * 12 FXDLAT Fixed Read Latency 0 - * 15:13 Reserved - * 19:16 CKEPDD CKE Power Down 0000 - * 23:20 ODTPDD ODT Power Down 0000 - * 24 NL2PD Power Down Non LPDDR2 pins 0 - * 25 NL2OE Output Enable Non LPDDR2 pins 1 - * 26 TPDPD LPDDR Only 0 - * 27 TPDOE LPDDR Only 0 - * 28 CKOE Output Enable Clk's 1 - * 29 ODTOE Output Enable ODT 1 - * 30 RSTOE RST# Output Enable 1 - * 31 CKEOE CKE Output Enable 1 - */ - write32_x(DDR_PHY + DDRPHY_DSGCR_OFFSET, 0xF2000927); - /* Sysnopsys advised 500R pullup/pulldown DQS DQSN */ - write32_x(DDR_PHY + DDRPHY_DXCCR_OFFSET, 0x00000C40); - /* DTPR0 : DRAM Timing Params 0 - * 1:0 tMRD 2 - * 4:2 tRTP 3 - * 7:5 tWTR 3 - * 11:8 tRP 6 - * 15:12 tRCD 6 - * 20:16 tRAS 18 - * 24:21 tRRD 4 - * 30:25 tRC 24 (23) - * 31 tCCD 0 BL/2 Cas to Cas - */ - write32_x(DDR_PHY + DDRPHY_DTPR0_OFFSET, 0x3092666E); - /* DTPR1 : DRAM Timing Params 1 - * 1:0 ODT On/Off Del Std 0 - * 2 tRTW Rd2Wr Del 0 std 1 +1 0 - * 8:3 tFAW 4 Bank Act 45ns = 18 18 - * 10:9 tMOD DDR3 Only 0 - * 11 tRTODT DDR3 Only 0 - * 15:12 Reserved - * 23:16 tRFC 195ns 78 def 131 78d - * 26:24 tDQSCK LPDDR2 only 1 - * 29:27 tDQSCKmax 1 - * 31:30 Reserved - */ - write32_x(DDR_PHY + DDRPHY_DTPR1_OFFSET, 0x094E0092); - /* DTPR2 : DRAM Timing Params 2 - * 9:0 tXS exit SR def 200, 200d - * 14:10 tXP PD Exit Del 8 3 - * 18:15 tCKE CKE Min pulse 3 - * 28:19 tDLLK DLL Lock time 200d - * 32:29 Reserved - */ - write32_x(DDR_PHY + DDRPHY_DTPR2_OFFSET, 0x06418CC8); - /* PTR0 : PHY Timing Params 0 - * 5:0 tDLLRST Def 27 - * 17:6 tDLLLOCK Def 2750 - * 21:18 tITMSRST Def 8 - * 31:22 Reserved 0 - */ - write32_x(DDR_PHY + DDRPHY_PTR0_OFFSET, 0x0022AF9B); - /* PTR1 : PHY Timing Params 1 - * 18:0 : tDINITO DRAM Init time 200us 80,000 Dec 0x13880 - * 29:19 : tDINIT1 DRAM Init time 400ns 160 Dec 0xA0 - */ - write32_x(DDR_PHY + DDRPHY_PTR1_OFFSET, 0x05013880); - /* DQS gating configuration: passive windowing mode */ - /* - * PGCR: PHY General cofiguration register - * 0 ITM DDR mode: 0 - * 1 DQS gading configuration: passive windowing 1 - * 2 DQS drift compensation: not supported in passive windowing 0 - * 4:3 DQS drift limit 0 - * 8:5 Digital test output select 0 - * 11:9 CK Enable: one bit for each 3 CK pair: 0x7 - * 13:12 CK Disable values: 0x2 - * 14 CK Invert 0 - * 15 IO loopback 0 - * 17:16 I/O DDR mode 0 - * 21:18 Ranks enable by training: 0xF - * 23:22 Impedance clock divider select 0x2 - * 24 Power down disable 1 - * 28:25 Refresh during training 0 - * 29 loopback DQS shift 0 - * 30 loopback DQS gating 0 - * 31 loopback mode 0 - */ - write32_x(DDR_PHY + DDRPHY_PGCR_OFFSET, 0x01BC2E02); - /* PGSR : Wait for INIT/DLL/Z Done from Power on Reset */ - if (wait_for_completion(DDR_PHY + DDRPHY_PGSR_OFFSET, 0x00000007)) - return DDR_TIMEOUT; - /* PIR : use PHY for DRAM Init */ - write32_x(DDR_PHY + DDRPHY_PIR_OFFSET, 0x000001DF); - /* PGSR : Wait for DRAM Init Done */ - if (wait_for_completion(DDR_PHY + DDRPHY_PGSR_OFFSET, 0x0000001F)) - return DDR_TIMEOUT; - /* Disable Impedance Calibration */ - write32_x(DDR_PHY + DDRPHY_ZQ0CR0_OFFSET, 0x3000014A); - write32_x(DDR_PHY + DDRPHY_ZQ1CR0_OFFSET, 0x3000014A); - - /* DF1STAT0 : wait for DFI_INIT_COMPLETE */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_DFISTAT0_OFFSET, - 0x00000001)) - return DDR_TIMEOUT; - /* POWCTL : Start the memory Power Up seq*/ - write32_x(DDR_PCTL + DDR_PCTL_POWCTL_OFFSET, 0x00000001); - /* POWSTAT : wait for POWER_UP_DONE */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_POWSTAT_OFFSET, - 0x00000001)) - return DDR_TIMEOUT; - /* - * TREFI : t_refi Timing Register 1X - * 12:0 t_refi 7.8us in 100ns 0x4E - * 15:13 Reserved 0 - * 18:16 num_add_ref 0 - * 30:19 Reserved 0 - * 31 Update 1 - */ - write32_x(DDR_PCTL + DDR_PCTL_TREFI_OFFSET, 0x8000004E); - /* TMRD : t_mrd Timing Register -- Range 2 to 3 */ - write32_x(DDR_PCTL + DDR_PCTL_TMRD_OFFSET, 0x00000002); - /* - * TRFC : t_rfc Timing Register -- Range 15 to 131 - * 195ns / 2.5ns 78 x4E - */ - write32_x(DDR_PCTL + DDR_PCTL_TRFC_OFFSET, 0x0000004E); - /* TRP : t_rp Timing Register -- Range 3 to 7 - * 4:0 tRP 12.5 / 2.5 = 5 6 For Now 6-6-6 - * 17:16 rpea_extra tRPall 8 bank 1 - */ - write32_x(DDR_PCTL + DDR_PCTL_TRP_OFFSET, 0x00010006); - /* TAL : Additive Latency Register -- AL in MR1 */ - write32_x(DDR_PCTL + DDR_PCTL_TAL_OFFSET, 0x00000000); - /* DFITPHYWRLAT : Write cmd to dfi_wrdata_en */ - write32_x(DDR_PCTL + DDR_PCTL_DFIWRLAT_OFFSET, 0x00000002); - /* DFITRDDATAEN : Read cmd to dfi_rddata_en */ - write32_x(DDR_PCTL + DDR_PCTL_DFITRDDATAEN_OFFSET, 0x00000002); - /* TCL : CAS Latency Timing Register -- CASL in MR0 6-6-6 */ - write32_x(DDR_PCTL + DDR_PCTL_TCL_OFFSET, 0x00000006); - /* TCWL : CAS Write Latency Register --CASL-1 */ - write32_x(DDR_PCTL + DDR_PCTL_TCWL_OFFSET, 0x00000005); - /* - * TRAS : Activate to Precharge cmd time - * Range 8 to 24: 45ns / 2.5ns = 18d - */ - write32_x(DDR_PCTL + DDR_PCTL_TRAS_OFFSET, 0x00000012); - /* - * TRC : Min. ROW cycle time - * Range 11 to 31: 57.5ns / 2.5ns = 23d Playing safe 24 - */ - write32_x(DDR_PCTL + DDR_PCTL_TRC_OFFSET, 0x00000018); - /* - * TRCD : Row to Column Delay - * Range 3 to 7 (TCL = TRCD): 2.5ns / 2.5ns = 5 but running 6-6-6 6 - */ - write32_x(DDR_PCTL + DDR_PCTL_TRCD_OFFSET, 0x00000006); - /* TRRD : Row to Row delay -- Range 2 to 6: 2K Page 10ns / 2.5ns = 4*/ - write32_x(DDR_PCTL + DDR_PCTL_TRRD_OFFSET, 0x00000004); - /* TRTP : Read to Precharge time -- Range 2 to 4: 7.3ns / 2.5ns = 3 */ - write32_x(DDR_PCTL + DDR_PCTL_TRTP_OFFSET, 0x00000003); - /* TWR : Write recovery time -- WR in MR0: 15ns / 2.5ns = 6 - */ - write32_x(DDR_PCTL + DDR_PCTL_TWR_OFFSET, 0x00000006); - /* - * TWTR : Write to read turn around time - * Range 2 to 4: 7.3ns / 2.5ns = 3 - */ - write32_x(DDR_PCTL + DDR_PCTL_TWTR_OFFSET, 0x00000003); - /* TEXSR : Exit Self Refresh to first valid cmd: tXS 200*/ - write32_x(DDR_PCTL + DDR_PCTL_TEXSR_OFFSET, 0x000000C8); - /* - * TXP : Exit Power Down to first valid cmd - * tXP 2, Settingto 3 to match PHY - */ - write32_x(DDR_PCTL + DDR_PCTL_TXP_OFFSET, 0x00000003); - /* - * TDQS : t_dqs Timing Register - * DQS additional turn around Rank 2 Rank (1 Rank) Def 1 - */ - write32_x(DDR_PCTL + DDR_PCTL_TDQS_OFFSET, 0x00000001); - /*TRTW : Read to Write turn around time Def 3 - * Actual gap t_bl + t_rtw - */ - write32_x(DDR_PCTL + DDR_PCTL_TRTW_OFFSET, 0x00000003); - /* TCKE : CKE min pulse width DEf 3 */ - write32_x(DDR_PCTL + DDR_PCTL_TCKE_OFFSET, 0x00000003); - /* - * TXPDLL : Slow Exit Power Down to first valid cmd delay - * tXARDS 10+AL = 10 - */ - write32_x(DDR_PCTL + DDR_PCTL_TXPDLL_OFFSET, 0x0000000A); - /* - * TCKESR : Min CKE Low width for Self refresh entry to exit - * t_ckesr = 0 DDR2 - */ - write32_x(DDR_PCTL + DDR_PCTL_TCKESR_OFFSET, 0x00000000); - /* SCFG : State Configuration Register (Enabling Self Refresh) - * 0 LP_en Leave Off for Bring Up 0 - * 5:1 Reserved - * 6 Synopsys Internal Only 0 - * 7 Enale PHY indication of LP Opportunity 1 - * 11:8 bbflags_timing max UPCTL_TCU_SED_P - tRP (16 - 6) Use 4 - * 16:12 Additional delay on accertion of ac_pdd 4 - * 31:17 Reserved - */ - write32_x(DDR_PCTL + DDR_PCTL_SCFG_OFFSET, 0x00004480); - /* - * DFITPHYWRDATA : dfi_wrdata_en to drive wr data - * DFI Clks wrdata_en to wrdata Def 1 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFITPHYWRDATA_OFFSET, 0x00000000); - /* - * DFITPHYRDLAT : dfi_rddata_en to dfi_rddata_valid - * DFI clks max rddata_en to rddata_valid Def 15 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFITPHYRDLAT_OFFSET, 0x00000008); - /* MCMD : PREA, Addr 0 Bank 0 Rank 0 Del 0 - * 3:0 cmd_opcode PREA 00001 - * 16:4 cmd_addr 0 - * 19:17 bank_addr 0 - * 23:20 rank_sel 0 0001 - * 27:24 cmddelay 0 - * 30:24 Reserved - */ - write32_x(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x80100001); - /* MRS cmd wait for completion */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x00100001)) - return DDR_TIMEOUT; - /* SCTL : UPCTL switch INIT CONFIG State */ - write32_x(DDR_PCTL + DDR_PCTL_SCTL_OFFSET, 0x00000001); - /* STAT : Wait for Switch INIT to Config State */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_STAT_OFFSET, 0x00000001)) - return DDR_TIMEOUT; - /* DFISTCFG0 : Drive various DFI signals appropriately - * 0 dfi_init_start 0 - * 1 dfi_freq_ratio_en 1 - * 2 dfi_data_byte_disable_en 1 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFISTCFG0_OFFSET, 0x00000003); - /* DFISTCFG1 : Enable various DFI support - * 0 dfi_dram_clk_disable_en 1 - * 1 dfi_dram_clk_disable_en_pdp only lPDDR 0 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFISTCFG1_OFFSET, 0x00000001); - /* DFISTCFG2 : Enable Parity and asoc interrupt - * 0 dfi_parity_in Enable 1 - * 1 Interrupt on dfi_parity_error 1 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFISTCFG2_OFFSET, 0x00000003); - /* DFILPCFG0 : DFI Low Power Interface Configuration - * 0 Enable DFI LP IF during PD 1 - * 3:1 Reserved - * 7:4 DFI tlp_wakeup time 0 - * 8 Enable DFI LP IF during SR 1 - * 11:9 Reserved - * 15:12 dfi_lp_wakeup in SR 0 - * 19:16 tlp_resp DFI 2.1 recomend 7 - * 23:20 Reserved - * 24 Enable DFI LP in Deep Power Down 0 - * 27:25 Reserved - * 31:28 DFI LP Deep Power Down Value 0 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFILPCFG0_OFFSET, 0x00070101); - /* DFIODTCFG : DFI ODT Configuration - * Only Enabled on Rank0 Writes - * 0 rank0_odt_read_nsel 0 - * 1 rank0_odt_read_sel 0 - * 2 rank0_odt_write_nsel 0 - * 3 rank0_odt_write_sel 1 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFIODTCFG_OFFSET, 0x00000008); - /* DFIODTCFG1 : DFI ODT Configuration - * 4:0 odt_lat_w 4 - * 12:8 odt_lat_r 0 Def - * 4:0 odt_len_bl8_w 6 Def - * 12:8 odt_len_bl8_r 6 Def - */ - write32_x(DDR_PCTL + DDR_PCTL_DFIODTCFG1_OFFSET, 0x06060004); - /* DCFG : DRAM Density 256 Mb 16 Bit IO Width - * 1:0 Devicw Width 1 x8, 2 x16, 3 x32 2 - * 5:2 Density 2Gb = 5 - * 6 Dram Type (MDDR/LPDDR2) Only 0 - * 7 Reserved 0 - * 10:8 Address Map R/B/C = 1 - * 31:11 Reserved - */ - write32_x(DDR_PCTL + DDR_PCTL_DCFG_OFFSET, 0x00000116); - /* PCFG_0 : Port 0 AXI config */ - if (BL8) - write32_x(DDR_PCTL + DDR_PCTL_PCFG0_OFFSET, 0x000800A0); - else - write32_x(DDR_PCTL + DDR_PCTL_PCFG0_OFFSET, 0x000400A0); - /* SCTL : UPCTL switch Config to ACCESS State */ - write32_x(DDR_PCTL + DDR_PCTL_SCTL_OFFSET, 0x00000002); - /* STAT : Wait for switch CFG -> GO State */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_STAT_OFFSET, 0x3)) - return DDR_TIMEOUT; - - return 0; -} diff --git a/src/soc/imgtec/pistachio/ddr3_init.c b/src/soc/imgtec/pistachio/ddr3_init.c deleted file mode 100644 index 7392525d23..0000000000 --- a/src/soc/imgtec/pistachio/ddr3_init.c +++ /dev/null @@ -1,514 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <device/mmio.h> -#include <soc/ddr_init.h> -#include <soc/ddr_private_reg.h> - -/* - * Configuration for the Winbond W631GG6KB part using - * Synopsys DDR uMCTL and DDR Phy - */ -int init_ddr3(void) -{ - uint32_t temp_rw_val; - - temp_rw_val = read32_x(TOPLEVEL_REGS + DDR_CTRL_OFFSET); - /* Set CLK_EN = 1 */ - temp_rw_val |= 0x2; - write32_x(TOPLEVEL_REGS + DDR_CTRL_OFFSET, temp_rw_val); - read32_x(TOPLEVEL_REGS + DDR_CTRL_OFFSET); - /* - * Reset the AXI bridge and DDR Controller in case any spurious - * writes have already happened to DDR - */ - /* Drive the 3 resets low */ - write32_x(TOPLEVEL_REGS + DDR_CTRL_OFFSET, 0x00000002); - read32_x(TOPLEVEL_REGS + DDR_CTRL_OFFSET); - read32_x(TOPLEVEL_REGS + DDR_CTRL_OFFSET); - - /* And release */ - write32_x(TOPLEVEL_REGS + DDR_CTRL_OFFSET, 0x0000000F); - /* Dummy read to fence the access between the reset above and - * the DDR controller writes below - */ - read32_x(TOPLEVEL_REGS + DDR_CTRL_OFFSET); - - /* Timings for 400MHz - * therefore 200MHz (5ns) uMCTL (Internal) Rate - */ - /* TOGCNT1U: Toggle Counter 1U Register: 1us 200h C8h */ - write32_x(DDR_PCTL + DDR_PCTL_TOGCNT1U_OFFSET, 0x000000C8); - /* TINIT: t_init Timing Register: at least 200us 200h C8h */ - write32_x(DDR_PCTL + DDR_PCTL_TINIT_OFFSET, 0x000000C8); - /* TRSTH: Reset High Time Register DDR3 ONLY */ - write32_x(DDR_PCTL + DDR_PCTL_TRSTH_OFFSET, 0x000001F4); - /* TOGCNT100N: Toggle Counter 100N Register: 20d, 14h*/ - write32_x(DDR_PCTL + DDR_PCTL_TOGG_CNTR_100NS_OFFSET, 0x00000014); - /* DTUAWDT DTU Address Width Register - * 1:0 column_addr_width Def 10 - 7 3 10 bits - * 4:3 bank_addr_width Def 3 - 2 1 3 bits (8 bank) - * 7:6 row_addr_width Def 14 - 13 1 3 bits - * 10:9 number_ranks Def 1 - 1 0 0 1 Rank - */ - write32_x(DDR_PCTL + DDR_PCTL_DTUAWDT_OFFSET, 0x0000004B); - /* MCFG - * 0 BL 1 -> 8 fixed - * 1 RDRIMM 0 - * 2 BL8 Burst Terminate 0 - * 3 2T = 0 - * 4 Multi Rank 0 - * 5 DDR3 En 1 - * 6 LPDDR S4 En - * 7 BST En 0, 1 for LPDDR2/3 - * 15:8 Power down Idle, passed by argument - * 16 Power Down Type, passed by argument - * 17 Power Down Exit 0 = slow, 1 = fast, pba - * 19:18 tFAW 45ns = 9 clk 5*2 -1 1h - * 21:20 mDDR/LPDDR2 BL 0 - * 23:22 mDDR/LPDDR2 Enable 0 - * 31:24 mDDR/LPDDR2/3 Dynamic Clock Stop 0 - */ - write32_x(DDR_PCTL + DDR_PCTL_MCFG_OFFSET, 0x00060021); - /* MCFG1: Memory Configuration-1 Register - * c7:0 sr_idle Self Refresh Idle Entery 32 * nclks 14h, set 0 for BUB - * 10:8 Fine tune MCFG.19:18 -1 - * 15:11 Reserved - * 23:16 Hardware Idle Period NA 0 - * 30:24 Reserved - * 31 c_active_in_pin exit auto clk stop NA 0 - */ - write32_x(DDR_PCTL + DDR_PCTL_MCFG1_OFFSET, 0x00000100); - /* DCR DRAM Config - * 2:0 SDRAM => DDR3 3 - * 3 DDR 8 Bank 1 - * 6:4 Primary DQ DDR3 Only 0 - * 7 Multi-Purpose Register DDR3 Only 0 - * 9:8 DDRTYPE LPDDR2 00 - * 26:10 Reserved - * 27 NOSRA No Simultaneous Rank Access 0 - * 28 DDR 2T 0 - * 29 UDIMM NA 0 - * 30 RDIMM NA 0 - * 31 TPD LPDDR2 0 - */ - write32_x(DDR_PHY + DDRPHY_DCR_OFFSET, 0x0000000B); - /* Generate to use with PHY and PCTL - * MR0 : DDR3 mode register 0 - * 1:0 BL 8 fixed 00 - * 3 BT Sequential 0 Interleaved 1 = 0 - * 6:4,2 CL 6 - * 7 TM Normal 0 - * 8 DLL Reset 1 (self Clearing) - * 11:9 WR 15 ns 6 (010) - * 12 PD Slow 1 Fast 0 0 - * 15:13 RSVD RSVD - * 31:16 Reserved - */ - write32_x(DDR_PHY + DDRPHY_MR_OFFSET, 0x00001520); - /* MR1 : DDR3 mode register 1 - * Generate to use with PHY and PCTL - * 0 DE DLL Enable 0 Disable 1 - * 5,1 DIC Output Driver RZQ/6 - * 9,6,2 ODT RZQ/4 - * 4:3 AL = 0 - * 7 write leveling enabled 0 - * 10 DQS 0 diff, 1 single = 0 - * 11 TDQS NA 0 - * 12 QOFF Normal mode 0 - * 15:13 RSVD - * 31:16 Reserved - */ - write32_x(DDR_PHY + DDRPHY_EMR_OFFSET, 0x00000004); - /* MR2 : DDR3 mode register 2 - * Generate to use with PHY and PCTL - * 2:0 PASR, NA 000 - * 3 CWL 000 (5) tck = 22.5ns - * 6 auto self-refresh 1 - * 7 SRT normal 0 - * 8 RSVD - * 10:9 dynamic ODT 10 RZQ/2 - * 31:11 Reserved - */ - write32_x(DDR_PHY + DDRPHY_EMR2_OFFSET, 0x00000440); - /* MR3: DDR3 mode register 3 - * 1:0 MPRLOC 00 - * 2 MPR 0 - */ - write32_x(DDR_PHY + DDRPHY_EMR3_OFFSET, 0x00000000); - /* DTAR : Data Training Register - * 11:0 Data Training Column Address - * 27:12 Data Training Row Address - * 30:28 Data Training Bank Address - * 31 Data Training Use MPR (DDR3 Only) - */ - write32_x(DDR_PHY + DDRPHY_DTAR_OFFSET, 0x00000000); - /* DSGCR - * 0 PUREN Def 1 - * 1 BDISEN Def 1 - * 2 ZUEN Def 1 - * 3 LPIOPD DEf 1 0 - * 4 LPDLLPD DEf 1 0 - * 7:5 DQSGX DQS Extention set to 1 - advised by Synopsys - * 10:8 DQSGE DQS Early Gate - 1 - advised by Sysnopsys - * 11 NOBUB No Bubbles, adds latency 1 - * 12 FXDLAT Fixed Read Latency 0 - * 15:13 Reserved - * 19:16 CKEPDD CKE Power Down 0000 - * 23:20 ODTPDD ODT Power Down 0000 - * 24 NL2PD Power Down Non LPDDR2 pins 0 - * 25 NL2OE Output Enable Non LPDDR2 pins 1 - * 26 TPDPD LPDDR Only 0 - * 27 TPDOE LPDDR Only 1 - * 28 CKOE Output Enable Clk's 1 - * 29 ODTOE Output Enable ODT 1 - * 30 RSTOE RST# Output Enable 1 - * 31 CKEOE CKE Output Enable 1 - */ - write32_x(DDR_PHY + DDRPHY_DSGCR_OFFSET, 0xFA000927); - /* Sysnopsys advised 500R pullup/pulldown DQS DQSN */ - write32_x(DDR_PHY + DDRPHY_DXCCR_OFFSET, 0x00000C40); - /* DTPR0 : DRAM Timing Params 0 - * 1:0 tMRD 0 - * 4:2 tRTP 2 - * 7:5 tWTR 4 - * 11:8 tRP 6 - * 15:12 tRCD 6 - * 20:16 tRAS 15 - * 24:21 tRRD 4 for x16 - * 30:25 tRC 21 - * 31 tCCD 0 BL/2 Cas to Cas - */ - write32_x(DDR_PHY + DDRPHY_DTPR0_OFFSET, 0x2A8F6688); - /* DTPR1 : DRAM Timing Params 1 - * 1:0 ODT On/Off Del Std 0 - * 2 tRTW Rd2Wr Del 0 std 1 +1 0 - * 8:3 tFAW 20 Clk - * 10:9 tMOD DDR3 Only 15 - * 11 tRTODT DDR3 Only 0 - * 15:12 Reserved - * 23:16 tRFC 160ns 64 ref 131 - * 26:24 tDQSCK LPDDR2 only 1 - * 29:27 tDQSCKmax 1 - * 31:30 Reserved - */ - write32_x(DDR_PHY + DDRPHY_DTPR1_OFFSET, 0x094006A0); - /* DTPR2 : DRAM Timing Params 2 - * 9:0 tXS exit SR def 512d - * 14:10 tXP PD Exit Del 8 5 - * 18:15 tCKE CKE Min pulse 5 - * 28:19 tDLLK DLL Lock time 512d - * 32:29 Reserved - */ - write32_x(DDR_PHY + DDRPHY_DTPR2_OFFSET, 0x10029600); - /* PTR0 : PHY Timing Params 0 - * 5:0 tDLLRST Def 27 - * 17:6 tDLLLOCK Def 2750 - * 21:18 tITMSRST Def 8 - * 31:22 Reserved 0 - */ - write32_x(DDR_PHY + DDRPHY_PTR0_OFFSET, 0x0022AF9B); - /* PTR1 : PHY Timing Params 1 - * 18:0 : tDINITO DRAM Init time 500us 200,000 Dec 0x30D40 - * 29:19 : tDINIT1 DRAM Init time tRFC + 10ns 68 - */ - write32_x(DDR_PHY + DDRPHY_PTR1_OFFSET, 0x02230D40); - /* DQS gating configuration: passive windowing mode */ - /* - * PGCR: PHY General cofiguration register - * 0 ITM DDR mode: 0 - * 1 DQS gading configuration: passive windowing 1 - * 2 DQS drift compensation: not supported in passive windowing 0 - * 4:3 DQS drift limit 0 - * 8:5 Digital test output select 0 - * 11:9 CK Enable: one bit for each 3 CK pair: 0x7 - * 13:12 CK Disable values: 0x2 - * 14 CK Invert 0 - * 15 IO loopback 0 - * 17:16 I/O DDR mode 0 - * 21:18 Ranks enable by training: 0xF - * 23:22 Impedance clock divider select 0x2 - * 24 Power down disable 1 - * 28:25 Refresh during training 0 - * 29 loopback DQS shift 0 - * 30 loopback DQS gating 0 - * 31 loopback mode 0 - */ - write32_x(DDR_PHY + DDRPHY_PGCR_OFFSET, 0x01BC2E02); - - /* PGSR : Wait for INIT/DLL/Z Done from Power on Reset */ - if (wait_for_completion(DDR_PHY + DDRPHY_PGSR_OFFSET, 0x00000007)) - return DDR_TIMEOUT; - /* PIR : PHY controlled init */ - write32_x(DDR_PHY + DDRPHY_PIR_OFFSET, 0x0000001F); - /* PGSR : Wait for DRAM Init Done */ - if (wait_for_completion(DDR_PHY + DDRPHY_PGSR_OFFSET, 0x00000007)) - return DDR_TIMEOUT; - /* PIR : controller DRAM initialization */ - write32_x(DDR_PHY + DDRPHY_PIR_OFFSET, 0x00040001); - /* PGSR : Wait for DRAM Init Done */ - if (wait_for_completion(DDR_PHY + DDRPHY_PGSR_OFFSET, 0x0000000F)) - return DDR_TIMEOUT; - /********************************************************************/ - /* DF1STAT0 : wait for DFI_INIT_COMPLETE */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_DFISTAT0_OFFSET, - 0x00000001)) - return DDR_TIMEOUT; - /* POWCTL : Start the memory Power Up seq*/ - write32_x(DDR_PCTL + DDR_PCTL_POWCTL_OFFSET, 0x80000001); - /* POWSTAT : wait for POWER_UP_DONE */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_POWSTAT_OFFSET, - 0x00000001)) - return DDR_TIMEOUT; - /* - * TREFI : t_refi Timing Register 1X - * 12:0 t_refi 7.8us in 100ns 0x4E - * 15:13 Reserved 0 - * 18:16 num_add_ref 0 - * 30:19 Reserved 0 - * 31 Update 1 - */ - write32_x(DDR_PCTL + DDR_PCTL_TREFI_OFFSET, 0x8000004E); - /* TMRD : t_mrd Timing Register -- Range 2 to 4*/ - write32_x(DDR_PCTL + DDR_PCTL_TMRD_OFFSET, 0x00000004); - /* - * TRFC : t_rfc Timing Register -- Range 15 to 131 - * 195ns / 2.5ns 78 x4E - */ - write32_x(DDR_PCTL + DDR_PCTL_TRFC_OFFSET, 0x0000004E); - /* TRP : t_rp Timing Register -- Range 3 to 7 - * 4:0 tRP 12.5 / 2.5 = 5 6 For Now 6-6-6 - * 17:16 rpea_extra DDR3 - value 0 - */ - write32_x(DDR_PCTL + DDR_PCTL_TRP_OFFSET, 0x00000006); - /* TAL : Additive Latency Register -- AL in MR1 */ - write32_x(DDR_PCTL + DDR_PCTL_TAL_OFFSET, 0x00000000); - /* TCL : CAS Latency Timing Register -- CASL in MR0 6-6-6 */ - write32_x(DDR_PCTL + DDR_PCTL_TCL_OFFSET, 0x00000006); - /* TCWL : CAS Write Latency Register --CASL-1 */ - write32_x(DDR_PCTL + DDR_PCTL_TCWL_OFFSET, 0x00000005); - /* TRAS : Activate to Precharge cmd time 15 45ns / 2.5ns = 18d */ - write32_x(DDR_PCTL + DDR_PCTL_TRAS_OFFSET, 0x0000000F); - /* TRC : Min. ROW cycle time 21 - * 57.5ns / 2.5ns = 23d Playing safe 24 - */ - write32_x(DDR_PCTL + DDR_PCTL_TRC_OFFSET, 0x00000015); - /* TRCD : Row to Column Delay # Range 3 to 7 (TCL = TRCD) - * 12.5ns / 2.5ns = 5 but running 6-6-6 6 - */ - write32_x(DDR_PCTL + DDR_PCTL_TRCD_OFFSET, 0x00000006); - /* TRRD : Row to Row delay -- Range 2 to 6 - * 2K Page 10ns / 2.5ns = 4 - */ - write32_x(DDR_PCTL + DDR_PCTL_TRRD_OFFSET, 0x00000004); - /* TRTP : Read to Precharge time -- Range 2 to 4 - * Largest 4 or 7.5ns / 2.5ns = 4 - */ - write32_x(DDR_PCTL + DDR_PCTL_TRTP_OFFSET, 0x00000004); - /* TWR : Write recovery time -- WR in MR0: 15ns / 2.5ns = 6 */ - write32_x(DDR_PCTL + DDR_PCTL_TWR_OFFSET, 0x00000006); - /* TWTR : Write to read turn around time -- Range 2 to 4 - * Largest 4 or 7.5ns / 2.5ns = 4 - */ - write32_x(DDR_PCTL + DDR_PCTL_TWTR_OFFSET, 0x00000004); - /* TEXSR : Exit Self Refresh to first valid cmd: tXS 512 */ - write32_x(DDR_PCTL + DDR_PCTL_TEXSR_OFFSET, 0x00000200); - /* TXP : Exit Power Down to first valid cmd - * tXP 2, Settingto 3 to match PHY - */ - write32_x(DDR_PCTL + DDR_PCTL_TXP_OFFSET, 0x00000003); - /* TDQS : t_dqs Timing Register - * DQS additional turn around Rank 2 Rank (1 Rank) Def 1 - */ - write32_x(DDR_PCTL + DDR_PCTL_TDQS_OFFSET, 0x00000001); - /* TRTW : Read to Write turn around time Def 3 - * Actual gap t_bl + t_rtw - */ - write32_x(DDR_PCTL + DDR_PCTL_TRTW_OFFSET, 0x00000003); - /* TCKE : CKE min pulse width DEf 3 */ - write32_x(DDR_PCTL + DDR_PCTL_TCKE_OFFSET, 0x00000003); - /* TXPDLL : Slow Exit Power Down to first valid cmd delay - * tXARDS 10+AL = 10 - */ - write32_x(DDR_PCTL + DDR_PCTL_TXPDLL_OFFSET, 0x0000000A); - /* TCKESR : Min CKE Low width for Self refresh entry to exit - * t_ckesr = 0 DDR2 - */ - write32_x(DDR_PCTL + DDR_PCTL_TCKESR_OFFSET, 0x00000004); - /* TMOD : MRS to any Non-MRS command -- Range 0 to 31 */ - write32_x(DDR_PCTL + DDR_PCTL_TMOD_OFFSET, 0x0000000F); - /* TZQCS : SDRAM ZQ Calibration Short Period */ - write32_x(DDR_PCTL + DDR_PCTL_TZQCS_OFFSET, 0x00000040); - /* TZQCL : SDRAM ZQ Calibration Long Period */ - write32_x(DDR_PCTL + DDR_PCTL_TZQCL_OFFSET, 0x00000200); - /* SCFG : State Configuration Register (Enabling Self Refresh) - * 0 LP_en Leave Off for Bring Up 0 - * 5:1 Reserved - * 6 Synopsys Internal Only 0 - * 7 Enale PHY indication of LP Opportunity 1 - * 11:8 bbflags_timing max UPCTL_TCU_SED_P - tRP (16 - 6) Use 4 - * 16:12 Additional delay on accertion of ac_pdd 4 - * 31:17 Reserved - */ - write32_x(DDR_PCTL + DDR_PCTL_SCFG_OFFSET, 0x00004480); - /* TREFI_MEM_DDR3 */ - write32_x(DDR_PCTL + DDR_PCTL_TREFI_MEM_DDR3_OFFSET, 0x00000C30); - - /* DFITPHYWRLAT : Write cmd to dfi_wrdata_en */ - write32_x(DDR_PCTL + DDR_PCTL_DFIWRLAT_OFFSET, 0x00000002); - /* DFITRDDATAEN : Read cmd to dfi_rddata_en */ - write32_x(DDR_PCTL + DDR_PCTL_DFITRDDATAEN_OFFSET, 0x00000002); - /* - * DFITPHYWRDATA : dfi_wrdata_en to drive wr data - * DFI Clks wrdata_en to wrdata Def 1 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFITPHYWRDATA_OFFSET, 0x00000000); - /* - * DFITPHYRDLAT : dfi_rddata_en to dfi_rddata_valid - * DFI clks max rddata_en to rddata_valid Def 15 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFITPHYRDLAT_OFFSET, 0x00000008); - /* DFISTCFG0 : Drive various DFI signals appropriately - * 0 dfi_init_start 1 - * 1 dfi_freq_ratio_en 1 - * 2 dfi_data_byte_disable_en 1 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFISTCFG0_OFFSET, 0x00000007); - /* DFISTCFG1 : Enable various DFI support - * 0 dfi_dram_clk_disable_en 1 - * 1 dfi_dram_clk_disable_en_pdp only lPDDR 0 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFISTCFG1_OFFSET, 0x00000001); - /* DFISTCFG2 : Enable Parity and asoc interrupt - * 0 dfi_parity_in Enable 1 - * 1 Interrupt on dfi_parity_error 1 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFISTCFG2_OFFSET, 0x00000003); - /* DFILPCFG0 : DFI Low Power Interface Configuration - * 0 Enable DFI LP IF during PD 1 - * 3:1 Reserved - * 7:4 DFI tlp_wakeup time 0 - * 8 Enable DFI LP IF during SR 1 - * 11:9 Reserved - * 15:12 dfi_lp_wakeup in SR 0 - * 19:16 tlp_resp DFI 2.1 recomend 7 - * 23:20 Reserved - * 24 Enable DFI LP in Deep Power Down 0 - * 27:25 Reserved - * 31:28 DFI LP Deep Power Down Value 0 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFILPCFG0_OFFSET, 0x00070101); - /* DFIODTCFG : DFI ODT Configuration - * Only Enabled on Rank0 Writes - * 0 rank0_odt_read_nsel 0 - * 1 rank0_odt_read_sel 0 - * 2 rank0_odt_write_nsel 0 - * 3 rank0_odt_write_sel 1 - */ - write32_x(DDR_PCTL + DDR_PCTL_DFIODTCFG_OFFSET, 0x00000008); - /* DFIODTCFG1 : DFI ODT Configuration - * 4:0 odt_lat_w 0 - * 12:8 odt_lat_r 0 Def - * 4:0 odt_len_bl8_w 6 Def - * 12:8 odt_len_bl8_r 6 Def - */ - write32_x(DDR_PCTL + DDR_PCTL_DFIODTCFG1_OFFSET, 0x060600000); - - /* Memory initialization */ - /* MCMD : PREA, Addr 0 Bank 0 Rank 0 Del 0 - * 3:0 cmd_opcode PREA 00001 - * 16:4 cmd_addr 0 - * 19:17 bank_addr 0 - * 23:20 rank_sel 0 0001 - * 27:24 cmddelay 0 - * 30:24 Reserved - */ - /* MCMD: MR2 */ - write32_x(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x80004403); - /* MRS cmd wait for completion */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x00004403)) - return DDR_TIMEOUT; - /* MCMD: MR3 */ - write32_x(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x80000003); - /* MRS cmd wait for completion */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x00000003)) - return DDR_TIMEOUT; - /* MCMD: MR1 */ - write32_x(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x80000043); - /* MRS cmd wait for completion */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x00000043)) - return DDR_TIMEOUT; - /* MCMD: MR0 */ - write32_x(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x80015203); - /* MRS cmd wait for completion */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x00015203)) - return DDR_TIMEOUT; - /* MCMD: ZQS cmd, long 5 short 4 */ - write32_x(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x80104005); - /* MRS cmd wait for completion */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x00104005)) - return DDR_TIMEOUT; - /* MCMD: deselect command */ - write32_x(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x80100000); - /* MRS cmd wait for completion */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x00100000)) - return DDR_TIMEOUT; - /* MCMD: deselect command */ - write32_x(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x8010000A); - /* MRS cmd wait for completion */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_MCMD_OFFSET, 0x0010000A)) - return DDR_TIMEOUT; - - /* DCFG : DRAM Density 256 Mb 16 Bit IO Width - * 1:0 Devicw Width 1 x8, 2 x16, 3 x32 2 - * 5:2 Density 2Gb = 5 - * 6 Dram Type (MDDR/LPDDR2) Only 0 - * 7 Reserved 0 - * 10:8 Address Map R/B/C = 1 - * 31:11 Reserved - */ - write32_x(DDR_PCTL + DDR_PCTL_DCFG_OFFSET, 0x00000116); - /* PCFG_0 : Port 0 AXI config */ - write32_x(DDR_PCTL + DDR_PCTL_PCFG0_OFFSET, 0x000800A0); - /* SCTL : UPCTL switch INIT CONFIG State */ - write32_x(DDR_PCTL + DDR_PCTL_SCTL_OFFSET, 0x00000001); - /* STAT : Wait for Switch INIT to Config State */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_STAT_OFFSET, 0x00000001)) - return DDR_TIMEOUT; - /* STAT : Wait for Switch INIT to Config State */ - write32_x(DDR_PCTL + DDR_PCTL_CMDTSTATEN_OFFSET, 0x00000001); - /* STAT : Wait for Switch INIT to Config State */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_CMDTSTAT_OFFSET, - 0x00000001)) - return DDR_TIMEOUT; - /* Use PHY for DRAM init */ - write32_x(DDR_PHY + DDRPHY_PIR_OFFSET, 0x00000181); - /* STAT : Wait for Switch INIT to Config State */ - if (wait_for_completion(DDR_PHY + DDRPHY_PGSR_OFFSET, 0x00000001F)) - return DDR_TIMEOUT; - /* Disable Impedance Calibration */ - write32_x(DDR_PHY + DDRPHY_ZQ0CR0_OFFSET, 0x3000014A); - write32_x(DDR_PHY + DDRPHY_ZQ1CR0_OFFSET, 0x3000014A); - - /* SCTL : UPCTL switch Config to ACCESS State */ - write32_x(DDR_PCTL + DDR_PCTL_SCTL_OFFSET, 0x00000002); - /* STAT : Wait for switch CFG -> GO State */ - if (wait_for_completion(DDR_PCTL + DDR_PCTL_STAT_OFFSET, 0x3)) - return DDR_TIMEOUT; - - return 0; -} diff --git a/src/soc/imgtec/pistachio/include/soc/clocks.h b/src/soc/imgtec/pistachio/include/soc/clocks.h deleted file mode 100644 index 27ba6d6c20..0000000000 --- a/src/soc/imgtec/pistachio/include/soc/clocks.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __SOC_IMGTEC_PISTACHIO_CLOCKS_H__ -#define __SOC_IMGTEC_PISTACHIO_CLOCKS_H__ - -#include <stdint.h> - -/* Functions for PLL setting */ -int sys_pll_setup(u8 divider1, u8 divider2, u8 predivider, u32 feedback); -int mips_pll_setup(u8 divider1, u8 divider2, u8 predivider, u32 feedback); - -/* Peripheral divider setting */ -void system_clk_setup(u8 divider); -void mips_clk_setup(u8 divider1, u8 divider2); -void uart1_clk_setup(u8 divider1, u16 divider2); -void i2c_clk_setup(u8 divider1, u16 divider2, u8 interface); -int usb_clk_setup(u8 divider, u8 refclksel, u8 fsel); -void rom_clk_setup(u8 divider); -void eth_clk_setup(u8 mux, u8 divider); -void setup_clk_gate_defaults(void); -enum { - CLOCKS_OK = 0, - PLL_TIMEOUT = -1, - USB_TIMEOUT = -2, - USB_VBUS_FAULT = -3 -}; - -#endif diff --git a/src/soc/imgtec/pistachio/include/soc/cpu.h b/src/soc/imgtec/pistachio/include/soc/cpu.h deleted file mode 100644 index c22dceba45..0000000000 --- a/src/soc/imgtec/pistachio/include/soc/cpu.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __SOC_IMGTEC_DANUBE_CPU_H__ -#define __SOC_IMGTEC_DANUBE_CPU_H__ - -#include <device/mmio.h> - -#define IMG_SPIM0_BASE_ADDRESS 0xB8100F00 -#define IMG_SPIM1_BASE_ADDRESS 0xB8101000 - -/* - * This register holds the FPGA image version - * If we're not working on the FPGA this will be 0 - */ -#define PRIMARY_FPGA_VERSION 0xB8149060 -#define IMG_PLATFORM_ID() read32_x(PRIMARY_FPGA_VERSION) -#define IMG_PLATFORM_ID_FPGA 0xD1400003 /* Last FPGA image */ -#define IMG_PLATFORM_ID_SILICON 0 - -#endif diff --git a/src/soc/imgtec/pistachio/include/soc/ddr_init.h b/src/soc/imgtec/pistachio/include/soc/ddr_init.h deleted file mode 100644 index d8b5b19bae..0000000000 --- a/src/soc/imgtec/pistachio/include/soc/ddr_init.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __SOC_IMGTEC_PISTACHIO_DDR_INIT_H__ -#define __SOC_IMGTEC_PISTACHIO_DDR_INIT_H__ - -#define DDR_TIMEOUT -1 - -int init_ddr2(void); -int init_ddr3(void); - -#endif diff --git a/src/soc/imgtec/pistachio/include/soc/ddr_private_reg.h b/src/soc/imgtec/pistachio/include/soc/ddr_private_reg.h deleted file mode 100644 index eab5b3a142..0000000000 --- a/src/soc/imgtec/pistachio/include/soc/ddr_private_reg.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __SOC_IMGTEC_PISTACHIO_DDR_PRIVATE_REG_H__ -#define __SOC_IMGTEC_PISTACHIO_DDR_PRIVATE_REG_H__ - -#include <device/mmio.h> -#include <timer.h> - -#define MAX_WAIT_MICROS 100000 - -#define TOPLEVEL_REGS 0xB8149000 - -#define DDR_CTRL_OFFSET (0x0020) -#define DDR_CLK_EN_MASK (0x00000002) -#define DDR_CLK_EN_SHIFT (1) -#define DDR_CLK_EN_LENGTH (1) - -#define DDR_PCTL 0xB8180000 -#define DDR_PCTL_SCFG_OFFSET (0x0000) -#define DDR_PCTL_SCTL_OFFSET (0x0004) -#define DDR_PCTL_STAT_OFFSET (0x0008) -#define DDR_PCTL_MCMD_OFFSET (0x0040) -#define DDR_PCTL_POWCTL_OFFSET (0x0044) -#define DDR_PCTL_POWSTAT_OFFSET (0x0048) -#define DDR_PCTL_CMDTSTAT_OFFSET (0x004C) -#define DDR_PCTL_CMDTSTATEN_OFFSET (0x0050) -#define DDR_PCTL_MCFG1_OFFSET (0x007C) -#define DDR_PCTL_MCFG_OFFSET (0x0080) -#define DDR_PCTL_MSTAT_OFFSET (0x0088) -#define DDR_PCTL_DTUAWDT_OFFSET (0x00B0) -#define DDR_PCTL_TOGCNT1U_OFFSET (0x00C0) -#define DDR_PCTL_TINIT_OFFSET (0x00C4) -#define DDR_PCTL_TRSTH_OFFSET (0x00C8) -#define DDR_PCTL_TOGG_CNTR_100NS_OFFSET (0x00CC) -#define DDR_PCTL_TREFI_OFFSET (0x00D0) -#define DDR_PCTL_TMRD_OFFSET (0x00D4) -#define DDR_PCTL_TRFC_OFFSET (0x00D8) -#define DDR_PCTL_TRP_OFFSET (0x00DC) -#define DDR_PCTL_TRTW_OFFSET (0x00E0) -#define DDR_PCTL_TAL_OFFSET (0x00E4) -#define DDR_PCTL_TCL_OFFSET (0x00E8) -#define DDR_PCTL_TCWL_OFFSET (0x00EC) -#define DDR_PCTL_TRAS_OFFSET (0x00F0) -#define DDR_PCTL_TRC_OFFSET (0x00F4) -#define DDR_PCTL_TRCD_OFFSET (0x00F8) -#define DDR_PCTL_TRRD_OFFSET (0x00FC) -#define DDR_PCTL_TRTP_OFFSET (0x0100) -#define DDR_PCTL_TWR_OFFSET (0x0104) -#define DDR_PCTL_TWTR_OFFSET (0x0108) -#define DDR_PCTL_TEXSR_OFFSET (0x010C) -#define DDR_PCTL_TXP_OFFSET (0x0110) -#define DDR_PCTL_TXPDLL_OFFSET (0x0114) -#define DDR_PCTL_TZQCS_OFFSET (0x0118) -#define DDR_PCTL_TDQS_OFFSET (0x0120) -#define DDR_PCTL_TCKE_OFFSET (0x012C) -#define DDR_PCTL_TMOD_OFFSET (0x0130) -#define DDR_PCTL_TZQCL_OFFSET (0x0138) -#define DDR_PCTL_TCKESR_OFFSET (0x0140) -#define DDR_PCTL_TREFI_MEM_DDR3_OFFSET (0x0148) -#define DDR_PCTL_DTUWACTL_OFFSET (0x0200) -#define DDR_PCTL_DTURACTL_OFFSET (0x0204) -#define DDR_PCTL_DTUCFG_OFFSET (0x0208) -#define DDR_PCTL_DTUECTL_OFFSET (0x020C) -#define DDR_PCTL_DTUWD0_OFFSET (0x0210) -#define DDR_PCTL_DTUWD1_OFFSET (0x0214) -#define DDR_PCTL_DTUWD2_OFFSET (0x0218) -#define DDR_PCTL_DTUWD3_OFFSET (0x021C) -#define DDR_PCTL_DFIODTCFG_OFFSET (0x0244) -#define DDR_PCTL_DFIODTCFG1_OFFSET (0x0248) -#define DDR_PCTL_DFITPHYWRDATA_OFFSET (0x0250) -#define DDR_PCTL_DFIWRLAT_OFFSET (0x0254) -#define DDR_PCTL_DFITRDDATAEN_OFFSET (0x0260) -#define DDR_PCTL_DFITPHYRDLAT_OFFSET (0x0264) -#define DDR_PCTL_DFIUPDCFG_OFFSET (0x0290) -#define DDR_PCTL_DFISTAT0_OFFSET (0x02C0) -#define DDR_PCTL_DFISTCFG0_OFFSET (0x02C4) -#define DDR_PCTL_DFISTCFG1_OFFSET (0x02C8) -#define DDR_PCTL_DFISTCFG2_OFFSET (0x02D8) -#define DDR_PCTL_DFILPCFG0_OFFSET (0x02F0) -#define DDR_PCTL_PCFG0_OFFSET (0x0400) -#define DDR_PCTL_CCFG_OFFSET (0x0480) -#define DDR_PCTL_DCFG_OFFSET (0x0484) -#define DDR_PCTL_CCFG1_OFFSET (0x048C) - -#define DDR_PHY 0xB8180800 -#define DDRPHY_PIR_OFFSET (0x0004) -#define DDRPHY_PGCR_OFFSET (0x0008) -#define DDRPHY_PGSR_OFFSET (0x000C) -#define DDRPHY_DLLGCR_OFFSET (0x0010) -#define DDRPHY_PTR0_OFFSET (0x0018) -#define DDRPHY_PTR1_OFFSET (0x001C) -#define DDRPHY_DXCCR_OFFSET (0x0028) -#define DDRPHY_DSGCR_OFFSET (0x002C) -#define DDRPHY_DCR_OFFSET (0x0030) -#define DDRPHY_DTPR0_OFFSET (0x0034) -#define DDRPHY_DTPR1_OFFSET (0x0038) -#define DDRPHY_DTPR2_OFFSET (0x003C) -#define DDRPHY_MR_OFFSET (0x0040) -#define DDRPHY_EMR_OFFSET (0x0044) -#define DDRPHY_EMR2_OFFSET (0x0048) -#define DDRPHY_EMR3_OFFSET (0x004C) -#define DDRPHY_DTAR_OFFSET (0x0054) -#define DDRPHY_BISTRR_OFFSET (0x0100) -#define DDRPHY_BISTWCR_OFFSET (0x010C) -#define DDRPHY_BISTAR0_OFFSET (0x0114) -#define DDRPHY_BISTAR1_OFFSET (0x0118) -#define DDRPHY_BISTAR2_OFFSET (0x011C) -#define DDRPHY_BISTUDPR_OFFSET (0x0120) -#define DDRPHY_BISTGSR_OFFSET (0x0124) -#define DDRPHY_ZQ0CR0_OFFSET (0x0180) -#define DDRPHY_ZQ1CR0_OFFSET (0x0190) - -#define DDR_TIMEOUT_VALUE_US 100000 - -static int wait_for_completion(u32 reg, u32 exp_val) -{ - struct stopwatch sw; - - stopwatch_init_usecs_expire(&sw, DDR_TIMEOUT_VALUE_US); - while (read32_x(reg) != exp_val) { - if (stopwatch_expired(&sw)) - return DDR_TIMEOUT; - } - return 0; -} - -#endif diff --git a/src/soc/imgtec/pistachio/include/soc/gpio.h b/src/soc/imgtec/pistachio/include/soc/gpio.h deleted file mode 100644 index 64f2e27c8b..0000000000 --- a/src/soc/imgtec/pistachio/include/soc/gpio.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __SOC_IMGTECH_PISTACHIO_GPIO_H__ -#define __SOC_IMGTECH_PISTACHIO_GPIO_H__ - -typedef unsigned int gpio_t; - -#endif // __SOC_IMGTECH_PISTACHIO_GPIO_H__ diff --git a/src/soc/imgtec/pistachio/include/soc/memlayout.ld b/src/soc/imgtec/pistachio/include/soc/memlayout.ld deleted file mode 100644 index cd81093fab..0000000000 --- a/src/soc/imgtec/pistachio/include/soc/memlayout.ld +++ /dev/null @@ -1,70 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <memlayout.h> - -#include <arch/header.ld> - -/* SRAM memory is mapped in two different locations. Define regions in both for - * full overlap checking and use this to guarantee they're kept in sync. */ -#define ASSERT_MIRRORED(r1, r2) \ - _ = ASSERT((_e##r1 - _##r1) == (_e##r2 - _##r2) && \ - (_##r1 & 0x7fffffff) == (_##r2 & 0x7fffffff), \ - STR(r1 and r2 do not match!)); - -SECTIONS -{ - /* - * All of DRAM (other than the DMA coherent area) is accessed through - * the identity mapping. - */ - DRAM_START(0x00000000) - /* DMA coherent area: accessed via KSEG1. */ - DMA_COHERENT(0x00100000, 1M) - POSTRAM_CBFS_CACHE(0x00200000, 512K) - RAMSTAGE(0x00280000, 128K) - - /* 0x18100000 -> 0x18540000 */ - SOC_REGISTERS(0x18100000, 0x440000) - /* - * GRAM becomes the SRAM. Accessed through KSEG0 in the bootblock - * and then through the identity mapping in ROM stage. - */ - SRAM_START(0x1a000000) - REGION(gram_bootblock, 0x1a000000, 28K, 1) - ROMSTAGE(0x1a007000, 60K) - VBOOT2_WORK(0x1a016000, 12K) - VBOOT2_TPM_LOG(0x1a019000, 2K) - PRERAM_CBFS_CACHE(0x1a019800, 46K) - SRAM_END(0x1a066000) - - /* Bootblock executes out of KSEG0 and sets up the identity mapping. - * This is identical to SRAM above, and thus also limited 64K and - * needs to avoid conflicts with items set up above. - */ - BOOTBLOCK(0x9a000000, 28K) - REGION(kseg0_romstage, 0x9a007000, 60K, 1) - - /* - * Let's use SRAM for stack and CBMEM console. Always accessed - * through KSEG0. - */ - STACK(0x9b000000, 8K) - PRERAM_CBMEM_CONSOLE(0x9b002000, 8K) - -} - -ASSERT_MIRRORED(bootblock, gram_bootblock) -ASSERT_MIRRORED(romstage, kseg0_romstage) diff --git a/src/soc/imgtec/pistachio/include/soc/spi.h b/src/soc/imgtec/pistachio/include/soc/spi.h deleted file mode 100644 index f23cca5821..0000000000 --- a/src/soc/imgtec/pistachio/include/soc/spi.h +++ /dev/null @@ -1,357 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -#ifndef __SOC_IMGTEC_DANUBE_SPI_H__ -#define __SOC_IMGTEC_DANUBE_SPI_H__ - -#include <arch/types.h> - -#define spi_read_reg_field(regval, field) \ -( \ - ((field##_MASK) == 0xFFFFFFFF) ? \ - (regval) : \ - (((regval) & (field##_MASK)) >> (field##_SHIFT))\ -) - -#define spi_write_reg_field(regval, field, val) \ -( \ - ((field##_MASK) == 0xFFFFFFFF) ? \ - (val) : \ - (((regval) & ~(field##_MASK)) | \ - (((val) << (field##_SHIFT)) & (field##_MASK))) \ -) - -/* - * Parameter register - * Each of these corresponds to a single port (ie CS line) in the interface - * Fields Name Description - * ====== ==== =========== - * b31:24 CLK_RATE Bit Clock rate = (24.576 * value / 512) MHz - * b23:16 CS_SETUP Chip Select setup = (40 * value) ns - * b15:8 CS_HOLD Chip Select hold = (40 * value) ns - * b7:0 CS_DELAY Chip Select delay = (40 * value) ns - */ - -#define SPIM_CLK_DIVIDE_MASK (0xFF000000) -#define SPIM_CS_SETUP_MASK (0x00FF0000) -#define SPIM_CS_HOLD_MASK (0x0000FF00) -#define SPIM_CS_DELAY_MASK (0x000000FF) -#define SPIM_CS_PARAM_MASK (SPIM_CS_SETUP_MASK \ - | SPIM_CS_HOLD_MASK \ - | SPIM_CS_DELAY_MASK) - -#define SPIM_CLK_DIVIDE_SHIFT (24) -#define SPIM_CS_SETUP_SHIFT (16) -#define SPIM_CS_HOLD_SHIFT (8) -#define SPIM_CS_DELAY_SHIFT (0) -#define SPIM_CS_PARAM_SHIFT (0) - -/* Control register */ - -#define SPFI_DRIBBLE_COUNT_MASK (0x000e0000) -#define SPFI_MEMORY_IF_MASK (0x00008000) -#define SPIM_BYTE_DELAY_MASK (0x00004000) -#define SPIM_CS_DEASSERT_MASK (0x00002000) -#define SPIM_CONTINUE_MASK (0x00001000) -#define SPIM_SOFT_RESET_MASK (0x00000800) -#define SPIM_SEND_DMA_MASK (0x00000400) -#define SPIM_GET_DMA_MASK (0x00000200) -#define SPIM_EDGE_TX_RX_MASK (0x00000100) -#define SPFI_TRNSFR_MODE_MASK (0x000000e0) -#define SPFI_TRNSFR_MODE_DQ_MASK (0x0000001c) -#define SPFI_TX_RX_MASK (0x00000002) -#define SPFI_EN_MASK (0x00000001) - -#define SPFI_DRIBBLE_COUNT_SHIFT (17) -#define SPFI_MEMORY_IF_SHIFT (15) -#define SPIM_BYTE_DELAY_SHIFT (14) -#define SPIM_CS_DEASSERT_SHIFT (13) -#define SPIM_CONTINUE_SHIFT (12) -#define SPIM_SOFT_RESET_SHIFT (11) -#define SPIM_SEND_DMA_SHIFT (10) -#define SPIM_GET_DMA_SHIFT (9) -#define SPIM_EDGE_TX_RX_SHIFT (8) -#define SPFI_TRNSFR_MODE_SHIFT (5) -#define SPFI_TRNSFR_MODE_DQ_SHIFT (2) -#define SPFI_TX_RX_SHIFT (1) -#define SPFI_EN_SHIFT (0) - -/* Transaction register */ - -#define SPFI_TSIZE_MASK (0xffff0000) -#define SPFI_CMD_LENGTH_MASK (0x0000e000) -#define SPFI_ADDR_LENGTH_MASK (0x00001c00) -#define SPFI_DUMMY_LENGTH_MASK (0x000003e0) -#define SPFI_PI_LENGTH_MASK (0x0000001c) - -#define SPFI_TSIZE_SHIFT (16) -#define SPFI_CMD_LENGTH_SHIFT (13) -#define SPFI_ADDR_LENGTH_SHIFT (10) -#define SPFI_DUMMY_LENGTH_SHIFT (5) -#define SPFI_PI_LENGTH_SHIFT (2) - -/* Port state register */ - -#define SPFI_PORT_SELECT_MASK (0x00700000) -/* WARNING the following bits are reversed */ -#define SPFI_CLOCK0_IDLE_MASK (0x000f8000) -#define SPFI_CLOCK0_PHASE_MASK (0x00007c00) -#define SPFI_CS0_IDLE_MASK (0x000003e0) -#define SPFI_DATA0_IDLE_MASK (0x0000001f) - -#define SPIM_CLOCK0_IDLE_MASK (0x000f8000) -#define SPIM_CLOCK0_PHASE_MASK (0x00007c00) -#define SPIM_CS0_IDLE_MASK (0x000003e0) -#define SPIM_DATA0_IDLE_MASK (0x0000001f) - -#define SPIM_PORT0_MASK (0x00084210) - -#define SPFI_PORT_SELECT_SHIFT (20) -/* WARNING the following bits are reversed, bit 0 is highest */ -#define SPFI_CLOCK0_IDLE_SHIFT (19) -#define SPFI_CLOCK0_PHASE_SHIFT (14) -#define SPFI_CS0_IDLE_SHIFT (9) -#define SPFI_DATA0_IDLE_SHIFT (4) - -#define SPIM_CLOCK0_IDLE_SHIFT (19) -#define SPIM_CLOCK0_PHASE_SHIFT (14) -#define SPIM_CS0_IDLE_SHIFT (9) -#define SPIM_DATA0_IDLE_SHIFT (4) - - -/* - * Interrupt registers - * SPFI_GDOF_MASK means Rx buffer full, not an overflow, because clock stalls - * SPFI_SDUF_MASK means Tx buffer empty, not an underflow, because clock stalls - */ -#define SPFI_IACCESS_MASK (0x00001000) -#define SPFI_GDEX8BIT_MASK (0x00000800) -#define SPFI_ALLDONE_MASK (0x00000200) -#define SPFI_GDFUL_MASK (0x00000100) -#define SPFI_GDHF_MASK (0x00000080) -#define SPFI_GDEX32BIT_MASK (0x00000040) -#define SPFI_GDTRIG_MASK (0x00000020) -#define SPFI_SDFUL_MASK (0x00000008) -#define SPFI_SDHF_MASK (0x00000004) -#define SPFI_SDE_MASK (0x00000002) -#define SPFI_SDTRIG_MASK (0x00000001) - -#define SPFI_IACCESS_SHIFT (12) -#define SPFI_GDEX8BIT_SHIFT (11) -#define SPFI_ALLDONE_SHIFT (9) -#define SPFI_GDFUL_SHIFT (8) -#define SPFI_GDHF_SHIFT (7) -#define SPFI_GDEX32BIT_SHIFT (6) -#define SPFI_GDTRIG_SHIFT (5) -#define SPFI_SDFUL_SHIFT (3) -#define SPFI_SDHF_SHIFT (2) -#define SPFI_SDE_SHIFT (1) -#define SPFI_SDTRIG_SHIFT (0) - - -/* SPFI register block */ - -#define SPFI_PORT_0_PARAM_REG_OFFSET (0x00) -#define SPFI_PORT_1_PARAM_REG_OFFSET (0x04) -#define SPFI_PORT_2_PARAM_REG_OFFSET (0x08) -#define SPFI_PORT_3_PARAM_REG_OFFSET (0x0C) -#define SPFI_PORT_4_PARAM_REG_OFFSET (0x10) -#define SPFI_CONTROL_REG_OFFSET (0x14) -#define SPFI_TRANSACTION_REG_OFFSET (0x18) -#define SPFI_PORT_STATE_REG_OFFSET (0x1C) - -#define SPFI_SEND_LONG_REG_OFFSET (0x20) -#define SPFI_SEND_BYTE_REG_OFFSET (0x24) -#define SPFI_GET_LONG_REG_OFFSET (0x28) -#define SPFI_GET_BYTE_REG_OFFSET (0x2C) - -#define SPFI_INT_STATUS_REG_OFFSET (0x30) -#define SPFI_INT_ENABLE_REG_OFFSET (0x34) -#define SPFI_INT_CLEAR_REG_OFFSET (0x38) - -#define SPFI_IMMEDIATE_STATUS_REG_OFFSET (0x3c) - -#define SPFI_FLASH_BASE_ADDRESS_REG_OFFSET (0x48) -#define SPFI_FLASH_STATUS_REG_OFFSET (0x4C) - -#define IMG_FALSE 0 -#define IMG_TRUE 1 - -/* Number of SPIM interfaces*/ -#define SPIM_NUM_BLOCKS 2 -/* Number of chip select lines supported by the SPI master port. */ -#define SPIM_NUM_PORTS_PER_BLOCK (SPIM_DUMMY_CS) -/* Maximum transfer size (in bytes) for the SPI master port. */ -#define SPIM_MAX_TRANSFER_BYTES (0xFFFF) -/* Maximum size of a flash command: command bytes+address_bytes. */ -#define SPIM_MAX_FLASH_COMMAND_BYTES (0x8) -/* Write operation to fifo done in blocks of 16 words (64 bytes) */ -#define SPIM_MAX_BLOCK_BYTES (0x40) -/* Number of tries until timeout error is returned*/ -#define SPI_TIMEOUT_VALUE_US 500000 - -/* SPIM initialisation function return value.*/ -enum spim_return { - /* Initialisation parameters are valid. */ - SPIM_OK = 0, - /* Mode parameter is invalid. */ - SPIM_INVALID_SPI_MODE, - /* Chip select idle level is invalid. */ - SPIM_INVALID_CS_IDLE_LEVEL, - /* Data idle level is invalid. */ - SPIM_INVALID_DATA_IDLE_LEVEL, - /* Chip select line parameter is invalid. */ - SPIM_INVALID_CS_LINE, - /* Transfer size parameter is invalid. */ - SPIM_INVALID_SIZE, - /* Read/write parameter is invalid. */ - SPIM_INVALID_READ_WRITE, - /* Continue parameter is invalid. */ - SPIM_INVALID_CONTINUE, - /* Invalid block index */ - SPIM_INVALID_BLOCK_INDEX, - /* Extended error values */ - /* Invalid bit rate */ - SPIM_INVALID_BIT_RATE, - /* Invalid CS hold value */ - SPIM_INVALID_CS_HOLD_VALUE, - /* API function called before API is initialised */ - SPIM_API_NOT_INITIALISED, - /* SPI driver initialisation failed */ - SPIM_DRIVER_INIT_ERROR, - /* Invalid transfer description */ - SPIM_INVALID_TRANSFER_DESC, - /* Timeout */ - SPIM_TIMEOUT - -}; - -/* This type defines the SPI Mode.*/ -enum spim_mode { - /* Mode 0 (clock idle low, data valid on first clock transition). */ - SPIM_MODE_0 = 0, - /* Mode 1 (clock idle low, data valid on second clock transition). */ - SPIM_MODE_1, - /* Mode 2 (clock idle high, data valid on first clock transition). */ - SPIM_MODE_2, - /* Mode 3 (clock idle high, data valid on second clock transition). */ - SPIM_MODE_3 - -}; - -/* This type defines the SPIM device numbers (chip select lines). */ -enum spim_device { - /* Device 0 (CS0). */ - SPIM_DEVICE0 = 0, - /* Device 1 (CS1). */ - SPIM_DEVICE1, - /* Device 2 (CS2). */ - SPIM_DEVICE2, - /* Device 3 (CS3). */ - SPIM_DEVICE3, - /* Device 4 (CS4). */ - SPIM_DEVICE4, - /* Dummy chip select. */ - SPIM_DUMMY_CS - -}; - -/* This structure defines communication parameters for a slave device */ -struct spim_device_parameters { - /* Bit rate value.*/ - unsigned char bitrate; - /* - * Chip select set up time. - * Time taken between chip select going active and activity occurring - * on the clock, calculated by dividing the desired set up time in ns - * by the Input clock period. (setup time / Input clock freq) - */ - unsigned char cs_setup; - /* - * Chip select hold time. - * Time after the last clock pulse before chip select goes inactive, - * calculated by dividing the desired hold time in ns by the - * Input clock period (hold time / Input clock freq). - */ - unsigned char cs_hold; - /* - * Chip select delay time (CS minimum inactive time). - * Minimum time after chip select goes inactive before chip select - * can go active again, calculated by dividing the desired delay time - * in ns by the Input clock period (delay time / Input clock freq). - */ - unsigned char cs_delay; - /* SPI Mode. */ - enum spim_mode spi_mode; - /* Chip select idle level (0=low, 1=high, Others=invalid). */ - unsigned int cs_idle_level; - /* Data idle level (0=low, 1=high, Others=invalid). */ - unsigned int data_idle_level; - -}; - -/* Command transfer mode */ -enum command_mode { - /* Command, address, dummy and PI cycles are transferred on sio0 */ - SPIM_CMD_MODE_0 = 0, - /* - * Command and Address are transferred on sio0 port only but dummy - * cycles and PI is transferred on all the interface ports. - */ - SPIM_CMD_MODE_1, - /* - * Command is transferred on sio0 port only but address, dummy - * and PI is transferred on all the interface portS - */ - SPIM_CMD_MODE_2, - /* - * Command, address, dummy and PI bytes are transferred on all - * the interfaces - */ - SPIM_CMD_MODE_3 -}; - -/* Data transfer mode */ -enum transfer_mode { - /* Transfer data in single mode */ - SPIM_DMODE_SINGLE = 0, - /* Transfer data in dual mode */ - SPIM_DMODE_DUAL, - /* Transfer data in quad mode */ - SPIM_DMODE_QUAD -}; - -/* This structure contains parameters that describe an SPIM operation. */ -struct spim_buffer { - /* The buffer to read from or write to. */ - unsigned char *buffer; - - /* Number of bytes to read/write. Valid range is 0 to 65536 bytes. */ - unsigned int size; - - /* Read/write select. TRUE for read, FALSE for write, Others-invalid.*/ - int isread; - - /* - * ByteDelay select. - * Selects whether or not a delay is inserted between bytes. - * 0 - Minimum inter-byte delay - * 1 - Inter-byte delay of (cs_hold/master_clk half period)*master_clk. - */ - int inter_byte_delay; -}; - -#endif /* __SOC_IMGTEC_DANUBE_SPI_H__ */ diff --git a/src/soc/imgtec/pistachio/monotonic_timer.c b/src/soc/imgtec/pistachio/monotonic_timer.c deleted file mode 100644 index 3bc65a54ae..0000000000 --- a/src/soc/imgtec/pistachio/monotonic_timer.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/cpu.h> -#include <device/mmio.h> -#include <soc/cpu.h> -#include <stdint.h> -#include <timer.h> - -#define PISTACHIO_CLOCK_SWITCH 0xB8144200 -#define MIPS_EXTERN_PLL_BYPASS_MASK 0x00000002 - -static int get_count_mhz_freq(void) -{ - static unsigned int count_mhz_freq; - - if (!count_mhz_freq) { - if (IMG_PLATFORM_ID() != IMG_PLATFORM_ID_SILICON) - count_mhz_freq = 25; /* FPGA board */ - else { - /* If MIPS PLL external bypass bit is set, it means - * that the MIPS PLL is already set up to work at a - * frequency of 550 MHz; otherwise, the crystal is - * used with a frequency of 52 MHz - */ - if (read32_x(PISTACHIO_CLOCK_SWITCH) & - MIPS_EXTERN_PLL_BYPASS_MASK) - /* Half MIPS PLL freq. */ - count_mhz_freq = 275; - else - /* Half Xtal freq. */ - count_mhz_freq = 26; - } - } - return count_mhz_freq; -} - -void timer_monotonic_get(struct mono_time *mt) -{ - mono_time_set_usecs(mt, read_c0_count() / get_count_mhz_freq()); -} diff --git a/src/soc/imgtec/pistachio/reset.c b/src/soc/imgtec/pistachio/reset.c deleted file mode 100644 index cc563372b4..0000000000 --- a/src/soc/imgtec/pistachio/reset.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/mmio.h> -#include <reset.h> - -#define PISTACHIO_WD_ADDR 0xB8102100 -#define PISTACHIO_WD_SW_RST_OFFSET 0x0000 - -void do_board_reset(void) -{ - /* Generate system reset */ - write32_x(PISTACHIO_WD_ADDR + PISTACHIO_WD_SW_RST_OFFSET, 0x1); -} diff --git a/src/soc/imgtec/pistachio/romstage.c b/src/soc/imgtec/pistachio/romstage.c deleted file mode 100644 index 8e44ea8749..0000000000 --- a/src/soc/imgtec/pistachio/romstage.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <cbmem.h> -#include <console/console.h> -#include <halt.h> -#include <program_loading.h> -#include <soc/ddr_init.h> - -void main(void) -{ - int error; - console_init(); - error = init_ddr2(); - - if (!error) { - /* - * When romstage is running it's always on the reboot path and - * never a resume path where cbmem recovery is required. - * Therefore, always initialize the cbmem area to be empty. - */ - cbmem_initialize_empty(); - run_ramstage(); - } - halt(); -} diff --git a/src/soc/imgtec/pistachio/soc.c b/src/soc/imgtec/pistachio/soc.c deleted file mode 100644 index 156d1dea47..0000000000 --- a/src/soc/imgtec/pistachio/soc.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2014 The Chromium OS Authors. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <symbols.h> - -static void soc_read_resources(struct device *dev) -{ - ram_resource(dev, 0, (uintptr_t)_dram / KiB, - (CONFIG_DRAM_SIZE_MB * MiB) / KiB); -} - -static void soc_init(struct device *dev) -{ - printk(BIOS_INFO, "CPU: Imgtec Pistachio\n"); -} - -static struct device_operations soc_ops = { - .read_resources = soc_read_resources, - .init = soc_init, -}; - -static void enable_soc_dev(struct device *dev) -{ - dev->ops = &soc_ops; -} - -struct chip_operations soc_imgtec_pistachio_ops = { - CHIP_NAME("SOC: Imgtec Pistachio") - .enable_dev = enable_soc_dev, -}; diff --git a/src/soc/imgtec/pistachio/spi.c b/src/soc/imgtec/pistachio/spi.c deleted file mode 100644 index acbbd909bd..0000000000 --- a/src/soc/imgtec/pistachio/spi.c +++ /dev/null @@ -1,587 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/mmio.h> -#include <soc/cpu.h> -#include <soc/spi.h> -#include <spi_flash.h> -#include <spi-generic.h> -#include <stdlib.h> -#include <string.h> -#include <timer.h> - -/* Imgtec controller uses 16 bit packet length. */ -#define IMGTEC_SPI_MAX_TRANSFER_SIZE ((1 << 16) - 1) - -struct img_spi_slave { - /* SPIM instance device parameters */ - struct spim_device_parameters device_parameters; - /* SPIM instance base address */ - u32 base; - /* Boolean property that is TRUE if API has been initialised */ - int initialised; -}; - -/* Allocate memory for the maximum number of devices */ -static struct -img_spi_slave img_spi_slaves[SPIM_NUM_BLOCKS*SPIM_NUM_PORTS_PER_BLOCK]; - -/* - * Wait for the bit at the shift position to be set in reg - * If the bit is not set in SPI_TIMEOUT_VALUE_US return with error - */ -static int wait_status(u32 reg, u32 shift) -{ - struct stopwatch sw; - - stopwatch_init_usecs_expire(&sw, SPI_TIMEOUT_VALUE_US); - while (!(read32_x(reg) & (1 << shift))) { - if (stopwatch_expired(&sw)) - return -SPIM_TIMEOUT; - } - return SPIM_OK; -} - -static struct img_spi_slave *get_img_slave(const struct spi_slave *slave) -{ - return img_spi_slaves + slave->bus * SPIM_NUM_PORTS_PER_BLOCK + - slave->cs; -} - -/* Transmitter function. Fills TX FIFO with data before enabling SPIM */ -static int transmitdata(const struct spi_slave *slave, u8 *buffer, u32 size) -{ - u32 blocksize, base, write_data; - int ret; - struct img_spi_slave *img_slave = get_img_slave(slave); - - base = img_slave->base; - while (size) { - /* Wait until FIFO empty */ - write32_x(base + SPFI_INT_CLEAR_REG_OFFSET, SPFI_SDE_MASK); - ret = wait_status(base + SPFI_INT_STATUS_REG_OFFSET, - SPFI_SDE_SHIFT); - if (ret) - return ret; - - /* - * Write to FIFO in blocks of 16 words (64 bytes) - * Do 32bit writes first. - */ - blocksize = SPIM_MAX_BLOCK_BYTES; - while ((size >= sizeof(u32)) && blocksize) { - memcpy(&write_data, buffer, sizeof(u32)); - write32_x(base + SPFI_SEND_LONG_REG_OFFSET, write_data); - buffer += sizeof(u32); - size -= sizeof(u32); - blocksize -= sizeof(u32); - } - while (size && blocksize) { - write32_x(base + SPFI_SEND_BYTE_REG_OFFSET, *buffer); - buffer++; - size--; - blocksize--; - } - } - return SPIM_OK; -} - -/* Receiver function */ -static int receivedata(const struct spi_slave *slave, u8 *buffer, u32 size) -{ - u32 read_data, base; - int ret; - struct img_spi_slave *img_slave = get_img_slave(slave); - - base = img_slave->base; - /* - * Do 32bit reads first. Clear status GDEX32BIT here so that the first - * status reg. read gets the actual bit state - */ - write32_x(base + SPFI_INT_CLEAR_REG_OFFSET, SPFI_GDEX32BIT_MASK); - while (size >= sizeof(u32)) { - ret = wait_status(base + SPFI_INT_STATUS_REG_OFFSET, - SPFI_GDEX32BIT_SHIFT); - if (ret) - return ret; - read_data = read32_x(base + SPFI_GET_LONG_REG_OFFSET); - memcpy(buffer, &read_data, sizeof(u32)); - buffer += sizeof(u32); - size -= sizeof(u32); - /* Clear interrupt status on GDEX32BITL */ - write32_x(base + SPFI_INT_CLEAR_REG_OFFSET, SPFI_GDEX32BIT_MASK); - } - - /* - * Do the remaining 8bit reads. Clear status GDEX8BIT here so that - * the first status reg. read gets the actual bit state - */ - write32_x(base + SPFI_INT_CLEAR_REG_OFFSET, SPFI_GDEX8BIT_MASK); - while (size) { - ret = wait_status(base + SPFI_INT_STATUS_REG_OFFSET, - SPFI_GDEX8BIT_SHIFT); - if (ret) - return ret; - *buffer = read32_x(base + SPFI_GET_BYTE_REG_OFFSET); - buffer++; - size--; - /* Clear interrupt status on SPFI_GDEX8BIT */ - write32_x(base + SPFI_INT_CLEAR_REG_OFFSET, SPFI_GDEX8BIT_MASK); - } - return SPIM_OK; -} - -/* Sets port parameters in port state register. */ -static void setparams(const struct spi_slave *slave, u32 port, - struct spim_device_parameters *params) -{ - u32 spim_parameters, port_state, base; - struct img_spi_slave *img_slave = get_img_slave(slave); - - base = img_slave->base; - spim_parameters = 0; - port_state = read32_x(base + SPFI_PORT_STATE_REG_OFFSET); - port_state &= ~((SPIM_PORT0_MASK>>port)|SPFI_PORT_SELECT_MASK); - port_state |= params->cs_idle_level<<(SPIM_CS0_IDLE_SHIFT-port); - port_state |= - params->data_idle_level<<(SPIM_DATA0_IDLE_SHIFT-port); - - /* Clock idle level and phase */ - switch (params->spi_mode) { - case SPIM_MODE_0: - break; - case SPIM_MODE_1: - port_state |= (1 << (SPIM_CLOCK0_PHASE_SHIFT - port)); - break; - case SPIM_MODE_2: - port_state |= (1 << (SPIM_CLOCK0_IDLE_SHIFT - port)); - break; - case SPIM_MODE_3: - port_state |= (1 << (SPIM_CLOCK0_IDLE_SHIFT - port)) | - (1 << (SPIM_CLOCK0_PHASE_SHIFT - port)); - break; - } - /* Set port state register */ - write32_x(base + SPFI_PORT_STATE_REG_OFFSET, port_state); - - /* Set up values to be written to device parameter register */ - spim_parameters |= params->bitrate << SPIM_CLK_DIVIDE_SHIFT; - spim_parameters |= params->cs_setup << SPIM_CS_SETUP_SHIFT; - spim_parameters |= params->cs_hold << SPIM_CS_HOLD_SHIFT; - spim_parameters |= params->cs_delay << SPIM_CS_DELAY_SHIFT; - - write32_x(base + SPFI_PORT_0_PARAM_REG_OFFSET + 4 * port, - spim_parameters); -} - -/* Sets up transaction register */ -static u32 transaction_reg_setup(struct spim_buffer *first, - struct spim_buffer *second) -{ - u32 reg = 0; - - /* 2nd transfer exists? */ - if (second) { - /* - * If second transfer exists, it's a "command followed by data" - * type of transfer and first transfer is defined by - * CMD_LENGTH, ADDR_LENGTH, DUMMY_LENGTH... fields of - * transaction register - */ - reg = spi_write_reg_field(reg, SPFI_CMD_LENGTH, 1); - reg = spi_write_reg_field(reg, SPFI_ADDR_LENGTH, - first->size - 1); - reg = spi_write_reg_field(reg, SPFI_DUMMY_LENGTH, 0); - /* Set data size (size of the second transfer) */ - reg = spi_write_reg_field(reg, SPFI_TSIZE, second->size); - } else { - /* Set data size, in this case size of the 1st transfer */ - reg = spi_write_reg_field(reg, SPFI_TSIZE, first->size); - } - return reg; -} - -/* Sets up control register */ -static u32 control_reg_setup(struct spim_buffer *first, - struct spim_buffer *second) -{ - u32 reg; - - /* Enable SPFI */ - reg = SPFI_EN_MASK; - reg |= first->inter_byte_delay ? SPIM_BYTE_DELAY_MASK : 0; - - /* Set up the transfer mode */ - reg = spi_write_reg_field(reg, SPFI_TRNSFR_MODE_DQ, SPIM_CMD_MODE_0); - reg = spi_write_reg_field(reg, SPFI_TRNSFR_MODE, SPIM_DMODE_SINGLE); - reg = spi_write_reg_field(reg, SPIM_EDGE_TX_RX, 1); - - if (second) { - /* Set TX bit if the 2nd transaction is 'send' */ - reg = spi_write_reg_field(reg, SPFI_TX_RX, - second->isread ? 0 : 1); - /* - * Set send/get DMA for both transactions - * (first is always 'send') - */ - reg = spi_write_reg_field(reg, SPIM_SEND_DMA, 1); - if (second->isread) - reg = spi_write_reg_field(reg, SPIM_GET_DMA, 1); - - } else { - /* Set TX bit if the 1st transaction is 'send' */ - reg |= first->isread ? 0 : SPFI_TX_RX_MASK; - /* Set send/get DMA */ - reg |= first->isread ? SPIM_GET_DMA_MASK : SPIM_SEND_DMA_MASK; - } - return reg; -} - -/* Checks the given buffer information */ -static int check_buffers(const struct spi_slave *slave, struct spim_buffer *first, - struct spim_buffer *second){ - - struct img_spi_slave *img_slave = get_img_slave(slave); - - if (!(img_slave->initialised)) - return -SPIM_API_NOT_INITIALISED; - /* - * First operation must always be defined - * It can be either a read or a write and its size cannot be bigge - * than SPIM_MAX_TANSFER_BYTES = 64KB - 1 (0xFFFF) - */ - if (!first) - return -SPIM_INVALID_READ_WRITE; - if (first->size > SPIM_MAX_TRANSFER_BYTES) - return -SPIM_INVALID_SIZE; - if (first->isread > 1) - return -SPIM_INVALID_READ_WRITE; - /* Check operation parameters for 'second' */ - if (second) { - /* - * If the second operation is defined it must be a read - * operation and its size must not be bigger than - * SPIM_MAX_TANSFER_BYTES = 64KB - 1 (0xFFFF) - */ - if (second->size > SPIM_MAX_TRANSFER_BYTES) - return -SPIM_INVALID_SIZE; - if (!second->isread) - return -SPIM_INVALID_READ_WRITE; - /* - * If the second operations is defined, the first operation - * must be a write and its size cannot be bigger than - * SPIM_MAX_FLASH_COMMAND_BYTES(8): command size (1) + - * address size (7). - */ - if (first->isread) - return -SPIM_INVALID_READ_WRITE; - if (first->size > SPIM_MAX_FLASH_COMMAND_BYTES) - return -SPIM_INVALID_SIZE; - - } - return SPIM_OK; -} - -/* Checks the set bitrate */ -static int check_bitrate(u32 rate) -{ - /* Bitrate must be 1, 2, 4, 8, 16, 32, 64, or 128 */ - switch (rate) { - case 1: - case 2: - case 4: - case 8: - case 16: - case 32: - case 64: - case 128: - return SPIM_OK; - default: - return -SPIM_INVALID_BIT_RATE; - } - return -SPIM_INVALID_BIT_RATE; -} - -/* Checks device parameters for errors */ -static int check_device_params(struct spim_device_parameters *pdev_param) -{ - if (pdev_param->spi_mode < SPIM_MODE_0 || - pdev_param->spi_mode > SPIM_MODE_3) - return -SPIM_INVALID_SPI_MODE; - if (check_bitrate(pdev_param->bitrate) != SPIM_OK) - return -SPIM_INVALID_BIT_RATE; - if (pdev_param->cs_idle_level > 1) - return -SPIM_INVALID_CS_IDLE_LEVEL; - if (pdev_param->data_idle_level > 1) - return -SPIM_INVALID_DATA_IDLE_LEVEL; - return SPIM_OK; -} - -/* Function that carries out read/write operations */ -static int spim_io(const struct spi_slave *slave, struct spim_buffer *first, - struct spim_buffer *second) -{ - u32 reg, base; - int i, trans_count, ret; - struct spim_buffer *transaction[2]; - struct img_spi_slave *img_slave = get_img_slave(slave); - - base = img_slave->base; - - ret = check_buffers(slave, first, second); - if (ret) - return ret; - - /* - * Soft reset peripheral internals, this will terminate any - * pending transactions - */ - write32_x(base + SPFI_CONTROL_REG_OFFSET, SPIM_SOFT_RESET_MASK); - write32_x(base + SPFI_CONTROL_REG_OFFSET, 0); - /* Port state register */ - reg = read32_x(base + SPFI_PORT_STATE_REG_OFFSET); - reg = spi_write_reg_field(reg, SPFI_PORT_SELECT, slave->cs); - write32_x(base + SPFI_PORT_STATE_REG_OFFSET, reg); - /* Set transaction register */ - reg = transaction_reg_setup(first, second); - write32_x(base + SPFI_TRANSACTION_REG_OFFSET, reg); - /* Clear status */ - write32_x(base + SPFI_INT_CLEAR_REG_OFFSET, 0xffffffff); - /* Set control register */ - reg = control_reg_setup(first, second); - write32_x(base + SPFI_CONTROL_REG_OFFSET, reg); - /* First transaction always exists */ - transaction[0] = first; - trans_count = 1; - /* Is there a second transaction? */ - if (second) { - transaction[1] = second; - trans_count++; - } - /* Now write/read FIFO's */ - for (i = 0; i < trans_count; i++) - /* Which transaction to execute, "Send" or "Get"? */ - if (transaction[i]->isread) { - /* Get */ - ret = receivedata(slave, transaction[i]->buffer, - transaction[i]->size); - if (ret) { - printk(BIOS_ERR, - "%s: Error: receive data failed.\n", - __func__); - return ret; - } - } else { - /* Send */ - ret = transmitdata(slave, transaction[i]->buffer, - transaction[i]->size); - if (ret) { - printk(BIOS_ERR, - "%s: Error: transmit data failed.\n", - __func__); - return ret; - } - } - - /* Wait for end of the transaction */ - ret = wait_status(base + SPFI_INT_STATUS_REG_OFFSET, - SPFI_ALLDONE_SHIFT); - if (ret) - return ret; - /* - * Soft reset peripheral internals, this will terminate any - * pending transactions - */ - write32_x(base + SPFI_CONTROL_REG_OFFSET, SPIM_SOFT_RESET_MASK); - write32_x(base + SPFI_CONTROL_REG_OFFSET, 0); - - return SPIM_OK; -} - -/* Claim the bus and prepare it for communication */ -static int spi_ctrlr_claim_bus(const struct spi_slave *slave) -{ - int ret; - struct img_spi_slave *img_slave; - - if (!slave) { - printk(BIOS_ERR, "%s: Error: slave was not set up.\n", - __func__); - return -SPIM_API_NOT_INITIALISED; - } - img_slave = get_img_slave(slave); - if (img_slave->initialised) - return SPIM_OK; - /* Check device parameters */ - ret = check_device_params(&(img_slave->device_parameters)); - if (ret) { - printk(BIOS_ERR, "%s: Error: incorrect device parameters.\n", - __func__); - return ret; - } - /* Set device parameters */ - setparams(slave, slave->cs, &(img_slave->device_parameters)); - /* Soft reset peripheral internals */ - write32_x(img_slave->base + SPFI_CONTROL_REG_OFFSET, - SPIM_SOFT_RESET_MASK); - write32_x(img_slave->base + SPFI_CONTROL_REG_OFFSET, 0); - img_slave->initialised = IMG_TRUE; - return SPIM_OK; -} - -/* Release the SPI bus */ -static void spi_ctrlr_release_bus(const struct spi_slave *slave) -{ - struct img_spi_slave *img_slave; - - if (!slave) { - printk(BIOS_ERR, "%s: Error: slave was not set up.\n", - __func__); - return; - } - img_slave = get_img_slave(slave); - img_slave->initialised = IMG_FALSE; - /* Soft reset peripheral internals */ - write32_x(img_slave->base + SPFI_CONTROL_REG_OFFSET, - SPIM_SOFT_RESET_MASK); - write32_x(img_slave->base + SPFI_CONTROL_REG_OFFSET, 0); -} - -/* SPI transfer */ -static int do_spi_xfer(const struct spi_slave *slave, const void *dout, - size_t bytesout, void *din, size_t bytesin) -{ - struct spim_buffer buff_0; - struct spim_buffer buff_1; - - /* If we only have a read or a write operation - * the parameters for it will be put in the first buffer - */ - buff_0.buffer = (dout) ? (void *)dout : (void *)din; - buff_0.size = (dout) ? bytesout : bytesin; - buff_0.isread = (dout) ? IMG_FALSE : IMG_TRUE; - buff_0.inter_byte_delay = 0; - - if (dout && din) { - /* Set up the read buffer to receive our data */ - buff_1.buffer = din; - buff_1.size = bytesin; - buff_1.isread = IMG_TRUE; - buff_1.inter_byte_delay = 0; - } - return spim_io(slave, &buff_0, (dout && din) ? &buff_1 : NULL); -} - -static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout, - size_t bytesout, void *din, size_t bytesin) -{ - unsigned int in_sz, out_sz; - int ret; - - if (!slave) { - printk(BIOS_ERR, "%s: Error: slave was not set up.\n", - __func__); - return -SPIM_API_NOT_INITIALISED; - } - if (!dout && !din) { - printk(BIOS_ERR, "%s: Error: both buffers are NULL.\n", - __func__); - return -SPIM_INVALID_TRANSFER_DESC; - } - - while (bytesin || bytesout) { - in_sz = min(IMGTEC_SPI_MAX_TRANSFER_SIZE, bytesin); - out_sz = min(IMGTEC_SPI_MAX_TRANSFER_SIZE, bytesout); - - ret = do_spi_xfer(slave, dout, out_sz, din, in_sz); - if (ret) - return ret; - - bytesin -= in_sz; - bytesout -= out_sz; - - if (bytesin) - din += in_sz; - else - din = NULL; - - if (bytesout) - dout += out_sz; - else - dout = NULL; - } - - return SPIM_OK; -} - -static int spi_ctrlr_setup(const struct spi_slave *slave) -{ - struct img_spi_slave *img_slave = NULL; - struct spim_device_parameters *device_parameters; - u32 base; - - switch (slave->bus) { - case 0: - base = IMG_SPIM0_BASE_ADDRESS; - break; - case 1: - base = IMG_SPIM1_BASE_ADDRESS; - break; - default: - printk(BIOS_ERR, "%s: Error: unsupported bus.\n", - __func__); - return -1; - } - if (slave->cs > SPIM_DEVICE4) { - printk(BIOS_ERR, "%s: Error: unsupported chipselect.\n", - __func__); - return -1; - } - - img_slave = get_img_slave(slave); - device_parameters = &(img_slave->device_parameters); - - img_slave->base = base; - - device_parameters->bitrate = 64; - device_parameters->cs_setup = 0; - device_parameters->cs_hold = 0; - device_parameters->cs_delay = 0; - device_parameters->spi_mode = SPIM_MODE_0; - device_parameters->cs_idle_level = 1; - device_parameters->data_idle_level = 0; - img_slave->initialised = IMG_FALSE; - - return 0; -} - -static const struct spi_ctrlr spi_ctrlr = { - .setup = spi_ctrlr_setup, - .claim_bus = spi_ctrlr_claim_bus, - .release_bus = spi_ctrlr_release_bus, - .xfer = spi_ctrlr_xfer, - .max_xfer_size = IMGTEC_SPI_MAX_TRANSFER_SIZE, -}; - -const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = { - { - .ctrlr = &spi_ctrlr, - .bus_start = 0, - .bus_end = 1, - }, -}; - -const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map); diff --git a/src/soc/imgtec/pistachio/uart.c b/src/soc/imgtec/pistachio/uart.c deleted file mode 100644 index d5042d546d..0000000000 --- a/src/soc/imgtec/pistachio/uart.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Eric Biederman - * Copyright (C) 2006-2010 coresystems GmbH - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/mmio.h> -#include <boot/coreboot_tables.h> -#include <console/uart.h> -#include <device/device.h> -#include <delay.h> -#include <drivers/uart/uart8250reg.h> - -/* Should support 8250, 16450, 16550, 16550A type UARTs */ - -/* Expected character delay at 1200bps is 9ms for a working UART - * and no flow-control. Assume UART as stuck if shift register - * or FIFO takes more than 50ms per character to appear empty. - */ -#define SINGLE_CHAR_TIMEOUT (50 * 1000) -#define FIFO_TIMEOUT (16 * SINGLE_CHAR_TIMEOUT) -#define UART_SHIFT 2 - -#define GEN_ACCESSOR(name, idx) \ -static inline uint8_t read_##name(unsigned int base_port) \ -{ \ - return read8((void *)(base_port + (idx << UART_SHIFT))); \ -} \ - \ -static inline void write_##name(unsigned int base_port, uint8_t val) \ -{ \ - write8((void *)(base_port + (idx << UART_SHIFT)), val); \ -} - -GEN_ACCESSOR(rbr, UART8250_RBR) -GEN_ACCESSOR(tbr, UART8250_TBR) -GEN_ACCESSOR(ier, UART8250_IER) -GEN_ACCESSOR(fcr, UART8250_FCR) -GEN_ACCESSOR(lcr, UART8250_LCR) -GEN_ACCESSOR(mcr, UART8250_MCR) -GEN_ACCESSOR(lsr, UART8250_LSR) -GEN_ACCESSOR(dll, UART8250_DLL) -GEN_ACCESSOR(dlm, UART8250_DLM) - -static int uart8250_mem_can_tx_byte(unsigned int base_port) -{ - return read_lsr(base_port) & UART8250_LSR_THRE; -} - -static void uart8250_mem_tx_byte(unsigned int base_port, unsigned char data) -{ - unsigned long int i = SINGLE_CHAR_TIMEOUT; - while (i-- && !uart8250_mem_can_tx_byte(base_port)) - udelay(1); - write_tbr(base_port, data); -} - -static void uart8250_mem_tx_flush(unsigned int base_port) -{ - unsigned long int i = FIFO_TIMEOUT; - while (i-- && !(read_lsr(base_port) & UART8250_LSR_TEMT)) - udelay(1); -} - -static int uart8250_mem_can_rx_byte(unsigned int base_port) -{ - return read_lsr(base_port) & UART8250_LSR_DR; -} - -static unsigned char uart8250_mem_rx_byte(unsigned int base_port) -{ - unsigned long int i = SINGLE_CHAR_TIMEOUT; - while (i-- && !uart8250_mem_can_rx_byte(base_port)) - udelay(1); - if (i) - return read_rbr(base_port); - else - return 0x0; -} - -static void uart8250_mem_init(unsigned int base_port, unsigned int divisor) -{ - /* Disable interrupts */ - write_ier(base_port, 0x0); - /* Enable FIFOs */ - write_fcr(base_port, UART8250_FCR_FIFO_EN); - - /* Assert DTR and RTS so the other end is happy */ - write_mcr(base_port, UART8250_MCR_DTR | UART8250_MCR_RTS); - - /* DLAB on */ - write_lcr(base_port, UART8250_LCR_DLAB | CONFIG_TTYS0_LCS); - - write_dll(base_port, divisor & 0xFF); - write_dlm(base_port, (divisor >> 8) & 0xFF); - - /* Set to 3 for 8N1 */ - write_lcr(base_port, CONFIG_TTYS0_LCS); -} - -unsigned int uart_platform_refclk(void) -{ - /* 1.8433179 MHz */ - return 1843318; -} - -void uart_init(int idx) -{ - u32 base = CONFIG_CONSOLE_SERIAL_UART_ADDRESS; - if (!base) - return; - - unsigned int div; - div = uart_baudrate_divisor(get_uart_baudrate(), - uart_platform_refclk(), 16); - uart8250_mem_init(base, div); -} - -void uart_tx_byte(int idx, unsigned char data) -{ - uart8250_mem_tx_byte(CONFIG_CONSOLE_SERIAL_UART_ADDRESS, data); -} - -unsigned char uart_rx_byte(int idx) -{ - return uart8250_mem_rx_byte(CONFIG_CONSOLE_SERIAL_UART_ADDRESS); -} - -void uart_tx_flush(int idx) -{ - uart8250_mem_tx_flush(CONFIG_CONSOLE_SERIAL_UART_ADDRESS); -} - -void uart_fill_lb(void *data) -{ - struct lb_serial serial; - serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED; - serial.baseaddr = CONFIG_CONSOLE_SERIAL_UART_ADDRESS; - serial.baud = get_uart_baudrate(); - serial.regwidth = 1 << UART_SHIFT; - serial.input_hertz = uart_platform_refclk(); - serial.uart_pci_addr = CONFIG_UART_PCI_ADDR; - lb_add_serial(&serial, data); - - lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data); -} |