diff options
Diffstat (limited to 'src/soc')
| -rw-r--r-- | src/soc/imgtec/pistachio/clocks.c | 22 |
1 files changed, 16 insertions, 6 deletions
diff --git a/src/soc/imgtec/pistachio/clocks.c b/src/soc/imgtec/pistachio/clocks.c index ec77d6511d..1b7722fe74 100644 --- a/src/soc/imgtec/pistachio/clocks.c +++ b/src/soc/imgtec/pistachio/clocks.c @@ -179,8 +179,10 @@ static int pll_setup(struct pll_parameters *param, u8 divider1, u8 divider2) struct stopwatch sw; /* Check input parameters */ - assert(!(divider1 & ~(param->postdiv1_mask))); - assert(!(divider2 & ~(param->postdiv2_mask))); + assert(!((divider1 << param->postdiv1_shift) & + ~(param->postdiv1_mask))); + assert(!((divider2 << param->postdiv2_shift) & + ~(param->postdiv2_mask))); /* Temporary bypass PLL (select XTAL as clock input) */ reg = read32(PISTACHIO_CLOCK_SWITCH); @@ -198,7 +200,8 @@ static int pll_setup(struct pll_parameters *param, u8 divider1, u8 divider2) write32(param->power_down_ctrl_addr, reg); if (param->feedback_addr) { - assert(!(param->feedback & ~(param->feedback_mask))); + assert(!((param->feedback << param->feedback_shift) & + ~(param->feedback_mask))); reg = read32(param->feedback_addr); reg &= ~(param->feedback_mask); reg |= (param->feedback << param->feedback_shift) & @@ -207,7 +210,8 @@ static int pll_setup(struct pll_parameters *param, u8 divider1, u8 divider2) } if (param->refdiv_addr) { - assert(!(param->refdivider & ~(param->refdiv_mask))); + assert(!((param->refdivider << param->refdiv_shift) & + ~(param->refdiv_mask))); reg = read32(param->refdiv_addr); reg &= ~(param->refdiv_mask); reg |= (param->refdivider << param->refdiv_shift) & @@ -307,8 +311,10 @@ int usb_clk_setup(u8 divider, u8 refclksel, u8 fsel) /* Check input parameters */ assert(!(divider & ~(USBPHYCLKOUT_MASK))); - assert(!(refclksel & ~(USBPHYSTRAPCTRL_REFCLKSEL_MASK))); - assert(!(fsel & ~(USBPHYCONTROL1_FSEL_MASK))); + assert(!((refclksel << USBPHYSTRAPCTRL_REFCLKSEL_SHIFT) & + ~(USBPHYSTRAPCTRL_REFCLKSEL_MASK))); + assert(!((fsel << USBPHYCONTROL1_FSEL_SHIFT) & + ~(USBPHYCONTROL1_FSEL_MASK))); /* Set USB divider */ reg = read32(USBPHYCLKOUT_CTRL_ADDR); @@ -338,6 +344,10 @@ int usb_clk_setup(u8 divider, u8 refclksel, u8 fsel) return USB_VBUS_FAULT; if (stopwatch_expired(&sw)) return USB_TIMEOUT; + /* Check if USB is set up properly */ + if ((reg & USBPHYSTATUS_RX_PHY_CLK_MASK) && + (reg & USBPHYSTATUS_RX_UTMI_CLK_MASK)) + break; } return CLOCKS_OK; |