diff options
Diffstat (limited to 'src/soc')
| -rw-r--r-- | src/soc/intel/skylake/Kconfig | 7 | ||||
| -rw-r--r-- | src/soc/intel/skylake/Makefile.inc | 4 | ||||
| -rw-r--r-- | src/soc/intel/skylake/acpi/irqlinks.asl | 4 | ||||
| -rw-r--r-- | src/soc/intel/skylake/acpi/pch.asl | 4 | ||||
| -rw-r--r-- | src/soc/intel/skylake/acpi/pcr.asl | 3 | ||||
| -rw-r--r-- | src/soc/intel/skylake/bootblock/pch.c | 53 | ||||
| -rw-r--r-- | src/soc/intel/skylake/bootblock/uart.c | 13 | ||||
| -rw-r--r-- | src/soc/intel/skylake/finalize.c | 19 | ||||
| -rw-r--r-- | src/soc/intel/skylake/gpio.c | 18 | ||||
| -rw-r--r-- | src/soc/intel/skylake/include/soc/iomap.h | 3 | ||||
| -rw-r--r-- | src/soc/intel/skylake/include/soc/itss.h | 41 | ||||
| -rw-r--r-- | src/soc/intel/skylake/include/soc/pcr.h | 125 | ||||
| -rw-r--r-- | src/soc/intel/skylake/include/soc/pcr_ids.h | 35 | ||||
| -rw-r--r-- | src/soc/intel/skylake/lpc.c | 27 | ||||
| -rw-r--r-- | src/soc/intel/skylake/pcr.c | 187 | ||||
| -rw-r--r-- | src/soc/intel/skylake/pmc.c | 3 | ||||
| -rw-r--r-- | src/soc/intel/skylake/smihandler.c | 28 |
17 files changed, 192 insertions, 382 deletions
diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig index 82e5d55555..ae86198935 100644 --- a/src/soc/intel/skylake/Kconfig +++ b/src/soc/intel/skylake/Kconfig @@ -51,6 +51,7 @@ config CPU_SPECIFIC_OPTIONS select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE select SOC_INTEL_COMMON_BLOCK select SOC_INTEL_COMMON_BLOCK_GSPI + select SOC_INTEL_COMMON_BLOCK_PCR select SOC_INTEL_COMMON_BLOCK_SA select SOC_INTEL_COMMON_BLOCK_XHCI select SOC_INTEL_COMMON_LPSS_I2C @@ -152,6 +153,12 @@ config MONOTONIC_TIMER_MSR help Provide a monotonic timer using the 24MHz MSR counter. +config PCR_BASE_ADDRESS + hex + default 0xfd000000 + help + This option allows you to select MMIO Base Address of sideband bus. + config PRE_GRAPHICS_DELAY int "Graphics initialization delay in ms" default 0 diff --git a/src/soc/intel/skylake/Makefile.inc b/src/soc/intel/skylake/Makefile.inc index cb8eb89514..2ef4bba143 100644 --- a/src/soc/intel/skylake/Makefile.inc +++ b/src/soc/intel/skylake/Makefile.inc @@ -22,7 +22,6 @@ bootblock-y += gpio.c bootblock-y += gspi.c bootblock-y += monotonic_timer.c bootblock-y += pch.c -bootblock-y += pcr.c bootblock-y += pmutil.c bootblock-y += spi.c bootblock-y += tsc_freq.c @@ -45,7 +44,6 @@ romstage-y += memmap.c romstage-y += monotonic_timer.c romstage-y += me.c romstage-y += pch.c -romstage-y += pcr.c romstage-y += pei_data.c romstage-y += pmutil.c romstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c @@ -76,7 +74,6 @@ ramstage-y += monotonic_timer.c ramstage-$(CONFIG_PLATFORM_USES_FSP1_1) += opregion.c ramstage-y += pch.c ramstage-y += pcie.c -ramstage-y += pcr.c ramstage-y += pei_data.c ramstage-y += pmc.c ramstage-y += pmutil.c @@ -98,7 +95,6 @@ ramstage-y += vr_config.c smm-y += cpu_info.c smm-y += gpio.c smm-y += monotonic_timer.c -smm-y += pcr.c smm-y += pch.c smm-y += pmutil.c smm-y += smihandler.c diff --git a/src/soc/intel/skylake/acpi/irqlinks.asl b/src/soc/intel/skylake/acpi/irqlinks.asl index f698a1e4ed..6a85a74be7 100644 --- a/src/soc/intel/skylake/acpi/irqlinks.asl +++ b/src/soc/intel/skylake/acpi/irqlinks.asl @@ -25,8 +25,8 @@ * https://bugs.acpica.org/show_bug.cgi?id=1201 */ OperationRegion (ITSS, SystemMemory, - Add (R_PCH_PCR_ITSS_PIRQA_ROUT, - Add (PCH_PCR_BASE_ADDRESS, + Add (PCR_ITSS_PIRQA_ROUT, + Add (CONFIG_PCR_BASE_ADDRESS, ShiftLeft (PID_ITSS, PCR_PORTID_SHIFT))), 8) Field (ITSS, ByteAcc, NoLock, Preserve) { diff --git a/src/soc/intel/skylake/acpi/pch.asl b/src/soc/intel/skylake/acpi/pch.asl index 4e7c951af5..78f31a804d 100644 --- a/src/soc/intel/skylake/acpi/pch.asl +++ b/src/soc/intel/skylake/acpi/pch.asl @@ -15,11 +15,13 @@ * GNU General Public License for more details. */ +#include <intelblocks/pcr.h> #include <soc/iomap.h> #include <soc/irq.h> +#include <soc/itss.h> #include <soc/gpio_defs.h> #include <soc/gpe.h> -#include <soc/pcr.h> +#include <soc/pcr_ids.h> /* GPIO Controller */ #include "gpio.asl" diff --git a/src/soc/intel/skylake/acpi/pcr.asl b/src/soc/intel/skylake/acpi/pcr.asl index efe8329407..4b8576b804 100644 --- a/src/soc/intel/skylake/acpi/pcr.asl +++ b/src/soc/intel/skylake/acpi/pcr.asl @@ -20,7 +20,8 @@ */ Method (PCRB, 1, NotSerialized) { - Return (Add (PCH_PCR_BASE_ADDRESS, ShiftLeft (Arg0, PCR_PORTID_SHIFT))) + Return (Add (CONFIG_PCR_BASE_ADDRESS, + ShiftLeft (Arg0, PCR_PORTID_SHIFT))) } /* diff --git a/src/soc/intel/skylake/bootblock/pch.c b/src/soc/intel/skylake/bootblock/pch.c index 60b22dc8e4..ebd68f1988 100644 --- a/src/soc/intel/skylake/bootblock/pch.c +++ b/src/soc/intel/skylake/bootblock/pch.c @@ -18,19 +18,35 @@ #include <chip.h> #include <device/device.h> #include <device/pci_def.h> +#include <intelblocks/pcr.h> #include <soc/bootblock.h> #include <soc/iomap.h> +#include <soc/itss.h> #include <soc/lpc.h> #include <soc/p2sb.h> #include <soc/pch.h> #include <soc/pci_devs.h> -#include <soc/pcr.h> +#include <soc/pcr_ids.h> #include <soc/pm.h> #include <soc/pmc.h> #include <soc/smbus.h> -/* Max PXRC registers in ITSS*/ -#define MAX_PXRC_CONFIG 0x08 +#define PCR_DMI_LPCLGIR1 0x2730 +#define PCR_DMI_LPCLGIR2 0x2734 +#define PCR_DMI_LPCLGIR3 0x2738 +#define PCR_DMI_LPCLGIR4 0x273c + +#define PCR_DMI_ACPIBA 0x27B4 +#define PCR_DMI_ACPIBDID 0x27B8 +#define PCR_DMI_PMBASEA 0x27AC +#define PCR_DMI_PMBASEC 0x27B0 +#define PCR_DMI_TCOBASE 0x2778 + +#define PCR_DMI_LPCIOD 0x2770 +#define PCR_DMI_LPCIOE 0x2774 + +#define PCR_RTC_CONF 0x3400 +#define PCR_RTC_CONF_UCMOS_EN 0x4 /* * Enable Prefetching and Caching. @@ -69,7 +85,7 @@ static void enable_p2sbbar(void) device_t dev = PCH_DEV_P2SB; /* Enable PCR Base address in PCH */ - pci_write_config32(dev, PCI_BASE_ADDRESS_0, PCH_PCR_BASE_ADDRESS); + pci_write_config32(dev, PCI_BASE_ADDRESS_0, CONFIG_PCR_BASE_ADDRESS); /* Enable P2SB MSE */ pci_write_config8(dev, PCI_COMMAND, @@ -108,10 +124,10 @@ static void pch_enable_lpc(void) pci_write_config32(PCH_DEV_LPC, LPC_GEN4_DEC, config->gen4_dec); /* Mirror these same settings in DMI PCR */ - pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR1, config->gen1_dec); - pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR2, config->gen2_dec); - pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR3, config->gen3_dec); - pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR4, config->gen4_dec); + pcr_write32(PID_DMI, PCR_DMI_LPCLGIR1, config->gen1_dec); + pcr_write32(PID_DMI, PCR_DMI_LPCLGIR2, config->gen2_dec); + pcr_write32(PID_DMI, PCR_DMI_LPCLGIR3, config->gen3_dec); + pcr_write32(PID_DMI, PCR_DMI_LPCLGIR4, config->gen4_dec); } static void pch_interrupt_init(void) @@ -140,8 +156,7 @@ static void pch_interrupt_init(void) pch_interrupt_routing[index] > 2 && pch_interrupt_routing[index] != 8 && pch_interrupt_routing[index] != 13) { - pcr_write8(PID_ITSS, - (R_PCH_PCR_ITSS_PIRQA_ROUT + index), + pcr_write8(PID_ITSS, PCR_ITSS_PIRQA_ROUT + index, pch_interrupt_routing[index]); } } @@ -166,8 +181,8 @@ static void soc_config_acpibase(void) * to [0x3F, PMC PCI Offset 40h bit[15:2], 1] */ reg32 = ((0x3f << 18) | ACPI_BASE_ADDRESS | 1); - pcr_write32(PID_DMI, R_PCH_PCR_DMI_ACPIBA, reg32); - pcr_write32(PID_DMI, R_PCH_PCR_DMI_ACPIBDID, 0x23A0); + pcr_write32(PID_DMI, PCR_DMI_ACPIBA, reg32); + pcr_write32(PID_DMI, PCR_DMI_ACPIBDID, 0x23A0); } static void soc_config_pwrmbase(void) @@ -195,10 +210,10 @@ static void soc_config_pwrmbase(void) * implication of making sure the memory allocated to PWRMBASE to be * 64KB in size. */ - pcr_write32(PID_DMI, R_PCH_PCR_DMI_PMBASEA, + pcr_write32(PID_DMI, PCR_DMI_PMBASEA, ((PCH_PWRM_BASE_ADDRESS & 0xFFFF0000) | (PCH_PWRM_BASE_ADDRESS >> 16))); - pcr_write32(PID_DMI, R_PCH_PCR_DMI_PMBASEC, 0x800023A0); + pcr_write32(PID_DMI, PCR_DMI_PMBASEC, 0x800023A0); } static void soc_config_tco(void) @@ -222,8 +237,7 @@ static void soc_config_tco(void) * Program "TCO Base Address" PCR[DMI] + 2778h[15:5, 1] * to [SMBUS PCI offset 50h[15:5], 1]. */ - pcr_write32(PID_DMI, R_PCH_PCR_DMI_TCOBASE, - (TCO_BASE_ADDDRESS | (1 << 1))); + pcr_write32(PID_DMI, PCR_DMI_TCOBASE, TCO_BASE_ADDDRESS | (1 << 1)); /* Program TCO timer halt */ tcobase = pci_read_config16(PCH_DEV_SMBUS, TCOBASE); @@ -236,8 +250,7 @@ static void soc_config_tco(void) static void soc_config_rtc(void) { /* Enable upper 128 bytes of CMOS */ - pcr_andthenor32(PID_RTC, R_PCH_PCR_RTC_CONF, ~0, - B_PCH_PCR_RTC_CONF_UCMOS_EN); + pcr_or32(PID_RTC, PCR_RTC_CONF, PCR_RTC_CONF_UCMOS_EN); } static void enable_heci(void) @@ -269,12 +282,12 @@ void pch_early_iorange_init(void) /* IO Decode Range */ lpc_en = COMA_RANGE | (COMB_RANGE << 4); pci_write_config16(PCH_DEV_LPC, LPC_IO_DEC, lpc_en); - pcr_write16(PID_DMI, R_PCH_PCR_DMI_LPCIOD, lpc_en); + pcr_write16(PID_DMI, PCR_DMI_LPCIOD, lpc_en); /* IO Decode Enable */ lpc_en = CNF1_LPC_EN | COMA_LPC_EN | KBC_LPC_EN | MC_LPC_EN; pci_write_config16(PCH_DEV_LPC, LPC_EN, lpc_en); - pcr_write16(PID_DMI, R_PCH_PCR_DMI_LPCIOE, lpc_en); + pcr_write16(PID_DMI, PCR_DMI_LPCIOE, lpc_en); } void pch_early_init(void) diff --git a/src/soc/intel/skylake/bootblock/uart.c b/src/soc/intel/skylake/bootblock/uart.c index ff1687c520..d51d179577 100644 --- a/src/soc/intel/skylake/bootblock/uart.c +++ b/src/soc/intel/skylake/bootblock/uart.c @@ -18,13 +18,20 @@ #include <arch/io.h> #include <console/uart.h> #include <device/pci_def.h> +#include <intelblocks/pcr.h> #include <stdint.h> #include <soc/bootblock.h> #include <soc/pci_devs.h> -#include <soc/pcr.h> +#include <soc/pcr_ids.h> #include <soc/serialio.h> #include <gpio.h> +/* Serial IO UART controller legacy mode */ +#define PCR_SERIAL_IO_GPPRVRW7 0x618 +#define PCR_SIO_PCH_LEGACY_UART0 (1 << 0) +#define PCR_SIO_PCH_LEGACY_UART1 (1 << 1) +#define PCR_SIO_PCH_LEGACY_UART2 (1 << 2) + /* UART2 pad configuration. Support RXD and TXD for now. */ static const struct pad_config uart2_pads[] = { /* UART2_RXD */ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), @@ -64,8 +71,8 @@ void pch_uart_init(void) /* Put UART2 in byte access mode for 16550 compatibility */ if (!IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM_32)) - pcr_andthenor32(PID_SERIALIO, - R_PCH_PCR_SERIAL_IO_GPPRVRW7, 0, SIO_PCH_LEGACY_UART2); + pcr_write32(PID_SERIALIO, PCR_SERIAL_IO_GPPRVRW7, + PCR_SIO_PCH_LEGACY_UART2); gpio_configure_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); } diff --git a/src/soc/intel/skylake/finalize.c b/src/soc/intel/skylake/finalize.c index e923dcdf24..f489e4b89b 100644 --- a/src/soc/intel/skylake/finalize.c +++ b/src/soc/intel/skylake/finalize.c @@ -20,6 +20,8 @@ #include <console/console.h> #include <console/post_codes.h> #include <cpu/x86/smm.h> +#include <device/pci.h> +#include <intelblocks/pcr.h> #include <reg_script.h> #include <spi-generic.h> #include <stdlib.h> @@ -27,13 +29,17 @@ #include <soc/me.h> #include <soc/p2sb.h> #include <soc/pci_devs.h> -#include <soc/pcr.h> +#include <soc/pcr_ids.h> #include <soc/pm.h> #include <soc/smbus.h> #include <soc/spi.h> #include <soc/systemagent.h> -#include <device/pci.h> -#include <chip.h> + +#define PCR_DMI_GCS 0x274C +#define PCR_DMI_GCS_BILD (1 << 0) +#define PSF_BASE_ADDRESS 0xA00 +#define PCR_PSFX_T0_SHDW_PCIEN 0x1C +#define PCR_PSFX_T0_SHDW_PCIEN_FUNDIS (1 << 8) static void pch_configure_endpoints(device_t dev, int epmask_id, uint32_t mask) { @@ -62,8 +68,8 @@ static void pch_disable_heci(void) pci_write_config8(dev, PCH_P2SB_E0 + 1, 0); /* disable heci */ - pcr_andthenor32(PID_PSF1, PSF_BASE_ADDRESS + PCH_PCR_PSFX_T0_SHDW_PCIEN, - ~0, PCH_PCR_PSFX_T0_SHDW_PCIEN_FUNDIS); + pcr_or32(PID_PSF1, PSF_BASE_ADDRESS + PCR_PSFX_T0_SHDW_PCIEN, + PCR_PSFX_T0_SHDW_PCIEN_FUNDIS); /* Remove the host accessing right to PSF register range. */ /* Set p2sb PCI offset EPMASK5 C4h [29, 28, 27, 26] to [1, 1, 1, 1] */ @@ -171,8 +177,7 @@ static void soc_lockdown(void) /* Reads back for posted write to take effect */ pci_read_config32(PCH_DEV_SPI, SPIBAR_BIOS_CNTL); /* GCS reg of DMI */ - pcr_andthenor8(PID_DMI, R_PCH_PCR_DMI_GCS, 0xFF, - B_PCH_PCR_DMI_GCS_BILD); + pcr_or8(PID_DMI, PCR_DMI_GCS, PCR_DMI_GCS_BILD); } /* Bios Lock */ diff --git a/src/soc/intel/skylake/gpio.c b/src/soc/intel/skylake/gpio.c index f65b1c98cd..afd65fc007 100644 --- a/src/soc/intel/skylake/gpio.c +++ b/src/soc/intel/skylake/gpio.c @@ -21,7 +21,8 @@ #include <device/device.h> #include <device/pci.h> #include <gpio.h> -#include <soc/pcr.h> +#include <intelblocks/pcr.h> +#include <soc/pcr_ids.h> #include <soc/iomap.h> #include <soc/pm.h> @@ -83,6 +84,11 @@ static const char *gpio_group_names[GPIO_NUM_GROUPS] = { "GPD", }; +static inline void *gpio_community_regs(int port_id) +{ + return pcr_reg_address(port_id, 0); +} + static inline size_t gpios_in_community(const struct gpio_community *comm) { /* max is inclusive */ @@ -128,7 +134,7 @@ static size_t community_clr_get_smi_sts(const struct gpio_community *comm, /* Not all groups can be routed to SMI. However, the registers * read as 0. In order to simplify the logic read everything from * each community. */ - regs = pcr_port_regs(comm->port_id); + regs = gpio_community_regs(comm->port_id); gpi_status_reg = (void *)®s[GPI_SMI_STS_OFFSET]; gpi_en_reg = (void *)®s[GPI_SMI_EN_OFFSET]; for (i = 0; i < num_grps; i++) { @@ -214,7 +220,7 @@ void gpio_route_gpe(uint16_t gpe0_route) uint32_t reg; const struct gpio_community *comm = &communities[i]; - regs = pcr_port_regs(comm->port_id); + regs = gpio_community_regs(comm->port_id); reg = read32(regs + MISCCFG_OFFSET); reg &= ~misc_cfg_reg_mask; @@ -234,7 +240,7 @@ static void *gpio_dw_regs(gpio_t pad) if (comm == NULL) return NULL; - regs = pcr_port_regs(comm->port_id); + regs = gpio_community_regs(comm->port_id); pad_relative = pad - comm->min; @@ -254,7 +260,7 @@ static void *gpio_hostsw_reg(gpio_t pad, size_t *bit) if (comm == NULL) return NULL; - regs = pcr_port_regs(comm->port_id); + regs = gpio_community_regs(comm->port_id); pad_relative = pad - comm->min; @@ -301,7 +307,7 @@ static void gpi_enable_smi(gpio_t pad) comm = gpio_get_community(pad); if (comm == NULL) return; - regs = pcr_port_regs(comm->port_id); + regs = gpio_community_regs(comm->port_id); gpi_status_reg = (void *)®s[GPI_SMI_STS_OFFSET]; gpi_en_reg = (void *)®s[GPI_SMI_EN_OFFSET]; diff --git a/src/soc/intel/skylake/include/soc/iomap.h b/src/soc/intel/skylake/include/soc/iomap.h index e2662cc7c0..52ef64041e 100644 --- a/src/soc/intel/skylake/include/soc/iomap.h +++ b/src/soc/intel/skylake/include/soc/iomap.h @@ -23,9 +23,6 @@ #define MCFG_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS #define MCFG_BASE_SIZE 0x4000000 -#define PCH_PCR_BASE_ADDRESS 0xfd000000 -#define PCH_PCR_BASE_SIZE 0x1000000 - #define UART_DEBUG_BASE_ADDRESS 0xfe034000 #define UART_DEBUG_BASE_SIZE 0x1000 diff --git a/src/soc/intel/skylake/include/soc/itss.h b/src/soc/intel/skylake/include/soc/itss.h new file mode 100644 index 0000000000..0681e9d5dd --- /dev/null +++ b/src/soc/intel/skylake/include/soc/itss.h @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef SOC_INTEL_SKL_ITSS_H +#define SOC_INTEL_SKL_ITSS_H + +/* Max PXRC registers in ITSS*/ +#define MAX_PXRC_CONFIG 0x08 + +/* PIRQA Routing Control Register*/ +#define PCR_ITSS_PIRQA_ROUT 0x3100 +/* PIRQB Routing Control Register*/ +#define PCR_ITSS_PIRQB_ROUT 0x3101 +/* PIRQC Routing Control Register*/ +#define PCR_ITSS_PIRQC_ROUT 0x3102 +/* PIRQD Routing Control Register*/ +#define PCR_ITSS_PIRQD_ROUT 0x3103 +/* PIRQE Routing Control Register*/ +#define PCR_ITSS_PIRQE_ROUT 0x3104 +/* PIRQF Routing Control Register*/ +#define PCR_ITSS_PIRQF_ROUT 0x3105 +/* PIRQG Routing Control Register*/ +#define PCR_ITSS_PIRQG_ROUT 0x3106 +/* PIRQH Routing Control Register*/ +#define PCR_ITSS_PIRQH_ROUT 0x3107 +/* ITSS Power reduction control */ +#define PCR_ITSS_ITSSPRC 0x3300 + +#endif /* SOC_INTEL_SKL_ITSS_H */ diff --git a/src/soc/intel/skylake/include/soc/pcr.h b/src/soc/intel/skylake/include/soc/pcr.h deleted file mode 100644 index c83a26765a..0000000000 --- a/src/soc/intel/skylake/include/soc/pcr.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _SOC_PCR_H_ -#define _SOC_PCR_H_ - -/* - * Primary to sideband (P2SB) for private configuration registers (PCR). - */ - -/* Port Id lives in bits 23:16 and register offset lives in 15:0 of address. */ -#define PCR_PORTID_SHIFT 16 -#define PCR_OFFSET_SHIFT 0 - -/* DMI Control Register */ -#define R_PCH_PCR_DMI_DMIC 0x2234 -#define B_PCH_PCR_DMI_DMIC_SRL (1 << 31) -#define R_PCH_PCR_DMI_LPCLGIR1 0x2730 -#define R_PCH_PCR_DMI_LPCLGIR2 0x2734 -#define R_PCH_PCR_DMI_LPCLGIR3 0x2738 -#define R_PCH_PCR_DMI_LPCLGIR4 0x273c -#define R_PCH_PCR_DMI_GCS 0x274C -#define B_PCH_PCR_DMI_GCS_BILD (1 << 0) -#define R_PCH_PCR_DMI_LPCIOD 0x2770 -#define R_PCH_PCR_DMI_LPCIOE 0x2774 -#define R_PCH_PCR_DMI_ACPIBA 0x27B4 -#define R_PCH_PCR_DMI_ACPIBDID 0x27B8 -#define R_PCH_PCR_DMI_PMBASEA 0x27AC -#define R_PCH_PCR_DMI_PMBASEC 0x27B0 -#define R_PCH_PCR_DMI_TCOBASE 0x2778 - -/* RTC configuration */ -#define R_PCH_PCR_RTC_CONF 0x3400 -#define B_PCH_PCR_RTC_CONF_UCMOS_LOCK (1 << 4) -#define B_PCH_PCR_RTC_CONF_LCMOS_LOCK (1 << 3) -#define B_PCH_PCR_RTC_CONF_RESERVED (1 << 31) -#define B_PCH_PCR_RTC_CONF_UCMOS_EN 0x4 - -/* ITSS PCRs*/ -/* PIRQA Routing Control Register*/ -#define R_PCH_PCR_ITSS_PIRQA_ROUT 0x3100 -/* PIRQB Routing Control Register*/ -#define R_PCH_PCR_ITSS_PIRQB_ROUT 0x3101 -/* PIRQC Routing Control Register*/ -#define R_PCH_PCR_ITSS_PIRQC_ROUT 0x3102 -/* PIRQD Routing Control Register*/ -#define R_PCH_PCR_ITSS_PIRQD_ROUT 0x3103 -/* PIRQE Routing Control Register*/ -#define R_PCH_PCR_ITSS_PIRQE_ROUT 0x3104 -/* PIRQF Routing Control Register*/ -#define R_PCH_PCR_ITSS_PIRQF_ROUT 0x3105 -/* PIRQG Routing Control Register*/ -#define R_PCH_PCR_ITSS_PIRQG_ROUT 0x3106 -/* PIRQH Routing Control Register*/ -#define R_PCH_PCR_ITSS_PIRQH_ROUT 0x3107 -/* ITSS Power reduction control */ -#define R_PCH_PCR_ITSS_ITSSPRC 0x3300 -# define CGE8254 (1 << 2) - -/* IO Trap PCRs */ -/* Trap status Register */ -#define R_PCH_PCR_PSTH_TRPST 0x1E00 -/* Trapped cycle */ -#define R_PCH_PCR_PSTH_TRPC 0x1E10 -/* Trapped write data */ -#define R_PCH_PCR_PSTH_TRPD 0x1E18 - -/* Serial IO UART controller legacy mode */ -#define R_PCH_PCR_SERIAL_IO_GPPRVRW7 0x618 -#define SIO_PCH_LEGACY_UART0 (1 << 0) -#define SIO_PCH_LEGACY_UART1 (1 << 1) -#define SIO_PCH_LEGACY_UART2 (1 << 2) - -/* - * P2SB port ids. - */ -#define PID_PSTH 0x89 -#define PID_GPIOCOM3 0xAC -#define PID_GPIOCOM2 0xAD -#define PID_GPIOCOM1 0xAE -#define PID_GPIOCOM0 0xAF -#define PID_PSF1 0xBA -#define PID_SCS 0xC0 -#define PID_RTC 0xC3 -#define PID_ITSS 0xC4 -#define PID_LPC 0xC7 -#define PID_SERIALIO 0xCB -#define PID_DMI 0xEF - -#define PCH_PCR_PSFX_T0_SHDW_PCIEN 0x1C - -#define PCH_PCR_PSFX_T0_SHDW_PCIEN_FUNDIS (1 << 8) -#define PSF_BASE_ADDRESS 0xA00 - -#if !defined(__ASSEMBLER__) && !defined(__ACPI__) -#include <stdint.h> - -/* All these return 0 on success and < 0 on errror. */ -int pcr_read32(u8 pid, u16 offset, u32 *outdata); -int pcr_read16(u8 pid, u16 offset, u16 *outdata); -int pcr_read8(u8 pid, u16 offset, u8 *outdata); -int pcr_write32(u8 pid, u16 offset, u32 indata); -int pcr_write16(u8 pid, u16 offset, u16 indata); -int pcr_write8(u8 pid, u16 offset, u8 indata); -int pcr_andthenor32(u8 pid, u16 offset, u32 anddata, u32 ordata); -int pcr_andthenor16(u8 pid, u16 offset, u16 anddata, u16 ordata); -int pcr_andthenor8(u8 pid, u16 offset, u8 anddata, u8 ordata); - -/* Get the starting address of the port's registers. */ -uint8_t *pcr_port_regs(u8 pid); -#endif /* if !defined(__ASSEMBLER__) && !defined(__ACPI__) */ - -#endif /* _SOC_PCR_H_ */ diff --git a/src/soc/intel/skylake/include/soc/pcr_ids.h b/src/soc/intel/skylake/include/soc/pcr_ids.h new file mode 100644 index 0000000000..71affd8eea --- /dev/null +++ b/src/soc/intel/skylake/include/soc/pcr_ids.h @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef SOC_INTEL_SKL_PCR_H +#define SOC_INTEL_SKL_PCR_H + +/* + * Port ids + */ +#define PID_PSTH 0x89 +#define PID_GPIOCOM3 0xAC +#define PID_GPIOCOM2 0xAD +#define PID_GPIOCOM1 0xAE +#define PID_GPIOCOM0 0xAF +#define PID_PSF1 0xBA +#define PID_SCS 0xC0 +#define PID_RTC 0xC3 +#define PID_ITSS 0xC4 +#define PID_LPC 0xC7 +#define PID_SERIALIO 0xCB +#define PID_DMI 0xEF + +#endif /* SOC_INTEL_SKL_PCR_H */ diff --git a/src/soc/intel/skylake/lpc.c b/src/soc/intel/skylake/lpc.c index a81ff9775f..82207ed012 100644 --- a/src/soc/intel/skylake/lpc.c +++ b/src/soc/intel/skylake/lpc.c @@ -30,11 +30,13 @@ #include <cpu/cpu.h> #include <cpu/x86/smm.h> #include <cbmem.h> +#include <intelblocks/pcr.h> #include <reg_script.h> #include <string.h> #include <soc/acpi.h> #include <soc/gpio.h> #include <soc/iomap.h> +#include <soc/itss.h> #include <soc/lpc.h> #include <soc/nvs.h> #include <soc/pch.h> @@ -42,7 +44,7 @@ #include <soc/pm.h> #include <soc/pmc.h> #include <soc/ramstage.h> -#include <soc/pcr.h> +#include <soc/pcr_ids.h> #if IS_ENABLED(CONFIG_CHROMEOS) #include <vendorcode/google/chromeos/chromeos.h> #endif @@ -97,14 +99,14 @@ static void pch_pirq_init(device_t dev) device_t irq_dev; config_t *config = dev->chip_info; - pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQA_ROUT, config->pirqa_routing); - pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQB_ROUT, config->pirqb_routing); - pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQC_ROUT, config->pirqc_routing); - pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQD_ROUT, config->pirqd_routing); - pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQE_ROUT, config->pirqe_routing); - pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQF_ROUT, config->pirqf_routing); - pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQG_ROUT, config->pirqg_routing); - pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQH_ROUT, config->pirqh_routing); + pcr_write8(PID_ITSS, PCR_ITSS_PIRQA_ROUT, config->pirqa_routing); + pcr_write8(PID_ITSS, PCR_ITSS_PIRQB_ROUT, config->pirqb_routing); + pcr_write8(PID_ITSS, PCR_ITSS_PIRQC_ROUT, config->pirqc_routing); + pcr_write8(PID_ITSS, PCR_ITSS_PIRQD_ROUT, config->pirqd_routing); + pcr_write8(PID_ITSS, PCR_ITSS_PIRQE_ROUT, config->pirqe_routing); + pcr_write8(PID_ITSS, PCR_ITSS_PIRQF_ROUT, config->pirqf_routing); + pcr_write8(PID_ITSS, PCR_ITSS_PIRQG_ROUT, config->pirqg_routing); + pcr_write8(PID_ITSS, PCR_ITSS_PIRQH_ROUT, config->pirqh_routing); for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { u8 int_pin = 0, int_line = 0; @@ -157,13 +159,12 @@ static const struct reg_script pch_misc_init_script[] = { static void clock_gate_8254(struct device *dev) { config_t *config = dev->chip_info; - const uint32_t cge8254_mask = CGE8254; + const uint32_t cge8254_mask = (1 << 2); if (!config->clock_gate_8254) return; - pcr_andthenor32(PID_ITSS, R_PCH_PCR_ITSS_ITSSPRC, - ~cge8254_mask, cge8254_mask); + pcr_rmw32(PID_ITSS, PCR_ITSS_ITSSPRC, ~cge8254_mask, cge8254_mask); } static void lpc_init(struct device *dev) @@ -190,7 +191,7 @@ static void pch_lpc_add_mmio_resources(device_t dev) * For this SOC, the range will be from 0FD000000h till FE7FFFFFh" * Hence, use FD000000h as PCR_BASE */ - const u32 default_decode_base = PCH_PCR_BASE_ADDRESS; + const u32 default_decode_base = CONFIG_PCR_BASE_ADDRESS; res = new_resource(dev, PCI_BASE_ADDRESS_0); res->base = default_decode_base; diff --git a/src/soc/intel/skylake/pcr.c b/src/soc/intel/skylake/pcr.c deleted file mode 100644 index 0b92d769d0..0000000000 --- a/src/soc/intel/skylake/pcr.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <arch/io.h> -#include <device/device.h> -#include <device/pci.h> -#include <soc/pcr.h> -#include <soc/iomap.h> -#include <console/console.h> - -static inline void *pcr_reg_address(u8 pid, u16 offset) -{ - uintptr_t reg_addr; - - /* Create an address based off of port id and offset. */ - reg_addr = PCH_PCR_BASE_ADDRESS; - reg_addr += ((uintptr_t)pid) << PCR_PORTID_SHIFT; - reg_addr += ((uintptr_t)offset) << PCR_OFFSET_SHIFT; - - return (void *)reg_addr; -} - -uint8_t *pcr_port_regs(u8 pid) -{ - return pcr_reg_address(pid, 0); -} - -/* - * Read PCR register. (This is internal function) - * It returns PCR register and size in 1/2/4 bytes. - * The offset should not exceed 0xFFFF and must be aligned with size - */ -static int pch_pcr_read(u8 pid, u16 offset, u32 size, void *data) -{ - if ((offset & (size - 1)) != 0) { - printk(BIOS_DEBUG, - "PchPcrRead error. Invalid Offset: %x Size: %x", - offset, size); - return -1; - } - switch (size) { - case 4: - *(u32 *) data = read32(pcr_reg_address(pid, offset)); - break; - case 2: - *(u16 *) data = read16(pcr_reg_address(pid, offset)); - break; - case 1: - *(u8 *) data = read8(pcr_reg_address(pid, offset)); - break; - default: - return -1; - } - return 0; -} - -int pcr_read32(u8 pid, u16 offset, u32 *outdata) -{ - return pch_pcr_read(pid, offset, sizeof(u32), (u32 *)outdata); -} - -int pcr_read16(u8 pid, u16 offset, u16 *outdata) -{ - return pch_pcr_read(pid, offset, sizeof(u16), (u32 *)outdata); -} - -int pcr_read8(u8 pid, u16 offset, u8 *outdata) -{ - return pch_pcr_read(pid, offset, sizeof(u8), (u32 *)outdata); -} - -/* - * After every write one needs to perform a read an innocuous register to - * ensure the writes are completed for certain ports. This is done for - * all ports so that the callers don't need the per-port knowledge for - * each transaction. - */ -static inline void complete_write(void) -{ - /* Read the general control and function disable register. */ - const size_t R_PCH_PCR_LPC_GCFD = 0x3418; - read32(pcr_reg_address(PID_LPC, R_PCH_PCR_LPC_GCFD)); -} - -/* - * Write PCR register. (This is internal function) - * It returns PCR register and size in 1/2/4 bytes. - * The offset should not exceed 0xFFFF and must be aligned with size - */ -static int pch_pcr_write(u8 pid, u16 offset, u32 size, u32 data) -{ - if ((offset & (size - 1)) != 0) { - printk(BIOS_DEBUG, - "PchPcrWrite error. Invalid Offset: %x Size: %x", - offset, size); - return -1; - } - /* Write the PCR register with provided data - * Then read back PCR register to prevent from back to back write. - */ - switch (size) { - case 4: - write32(pcr_reg_address(pid, offset), (u32) data); - break; - case 2: - write16(pcr_reg_address(pid, offset), (u16) data); - break; - case 1: - write8(pcr_reg_address(pid, offset), (u8) data); - break; - default: - return -1; - } - /* Ensure the writes complete. */ - complete_write(); - - return 0; -} - -int pcr_write32(u8 pid, u16 offset, u32 indata) -{ - return pch_pcr_write(pid, offset, sizeof(u32), indata); -} - -int pcr_write16(u8 pid, u16 offset, u16 indata) -{ - return pch_pcr_write(pid, offset, sizeof(u16), indata); -} - -int pcr_write8(u8 pid, u16 offset, u8 indata) -{ - return pch_pcr_write(pid, offset, sizeof(u8), indata); -} - -/* - * Write PCR register. (This is internal function) - * It programs PCR register and size in 1/2/4 bytes. - * The offset should not exceed 0xFFFF and must be aligned with size - * - * u8 defines as 8 bit Port ID that will be used when sending - * transaction to sideband. - */ -static int pcr_and_then_or(u8 pid, u16 offset, u32 size, u32 anddata, - u32 ordata) -{ - u8 status; - u32 data32 = 0; - - status = pch_pcr_read(pid, offset, size, &data32); - if (status != 0) - return -1; - - data32 &= anddata; - data32 |= ordata; - - status = pch_pcr_write(pid, offset, size, data32); - return status; -} - -int pcr_andthenor32(u8 pid, u16 offset, u32 anddata, u32 ordata) -{ - return pcr_and_then_or(pid, offset, sizeof(u32), anddata, ordata); -} - -int pcr_andthenor16(u8 pid, u16 offset, u16 anddata, u16 ordata) -{ - return pcr_and_then_or(pid, offset, sizeof(u16), anddata, ordata); -} - -int pcr_andthenor8(u8 pid, u16 offset, u8 anddata, u8 ordata) -{ - return pcr_and_then_or(pid, offset, sizeof(u8), anddata, ordata); -} diff --git a/src/soc/intel/skylake/pmc.c b/src/soc/intel/skylake/pmc.c index 003c462b05..64df18650b 100644 --- a/src/soc/intel/skylake/pmc.c +++ b/src/soc/intel/skylake/pmc.c @@ -24,6 +24,7 @@ #include <arch/ioapic.h> #include <arch/acpi.h> #include <cpu/cpu.h> +#include <intelblocks/pcr.h> #include <pc80/mc146818rtc.h> #include <reg_script.h> #include <string.h> @@ -33,7 +34,7 @@ #include <soc/pmc.h> #include <soc/pm.h> #include <cpu/x86/smm.h> -#include <soc/pcr.h> +#include <soc/pcr_ids.h> #include <soc/ramstage.h> #include <vboot/vbnv.h> #include <vboot/vbnv_layout.h> diff --git a/src/soc/intel/skylake/smihandler.c b/src/soc/intel/skylake/smihandler.c index 382bdfc80f..e6f6959572 100644 --- a/src/soc/intel/skylake/smihandler.c +++ b/src/soc/intel/skylake/smihandler.c @@ -21,22 +21,31 @@ #include <arch/io.h> #include <console/console.h> #include <cpu/x86/cache.h> -#include <device/pci_def.h> #include <cpu/x86/smm.h> -#include <spi-generic.h> +#include <device/pci_def.h> #include <elog.h> +#include <intelblocks/pcr.h> #include <pc80/mc146818rtc.h> +#include <spi-generic.h> #include <soc/flash_controller.h> #include <soc/iomap.h> #include <soc/lpc.h> #include <soc/nvs.h> #include <soc/pci_devs.h> #include <soc/pch.h> -#include <soc/pcr.h> +#include <soc/pcr_ids.h> #include <soc/pm.h> #include <soc/pmc.h> #include <soc/smm.h> +/* IO Trap PCRs */ +/* Trap status Register */ +#define PCR_PSTH_TRPST 0x1E00 +/* Trapped cycle */ +#define PCR_PSTH_TRPC 0x1E10 +/* Trapped write data */ +#define PCR_PSTH_TRPD 0x1E18 + static u8 smm_initialized = 0; /* @@ -425,16 +434,17 @@ static void southbridge_smi_periodic(void) static void southbridge_smi_monitor(void) { #define IOTRAP(x) (trap_sts & (1 << x)) - u32 trap_sts, trap_cycle; + u32 trap_cycle; u32 data, mask = 0; + u8 trap_sts; int i; /* TRSR - Trap Status Register */ - pcr_read32(PID_PSTH, R_PCH_PCR_PSTH_TRPST, &trap_sts); + trap_sts = pcr_read8(PID_PSTH, PCR_PSTH_TRPST); /* Clear trap(s) in TRSR */ - pcr_write8(PID_PSTH, R_PCH_PCR_PSTH_TRPST, trap_sts); + pcr_write8(PID_PSTH, PCR_PSTH_TRPST, trap_sts); /* TRPC - Trapped cycle */ - pcr_read32(PID_PSTH, R_PCH_PCR_PSTH_TRPC, &trap_cycle); + trap_cycle = pcr_read32(PID_PSTH, PCR_PSTH_TRPC); for (i = 16; i < 20; i++) { if (trap_cycle & (1 << i)) mask |= (0xff << ((i - 16) << 2)); @@ -458,7 +468,7 @@ static void southbridge_smi_monitor(void) if (!(trap_cycle & (1 << 24))) { /* It's a write */ printk(BIOS_DEBUG, "SMI1 command\n"); /* Trapped write data */ - pcr_read32(PID_PSTH, R_PCH_PCR_PSTH_TRPD, &data); + data = pcr_read32(PID_PSTH, PCR_PSTH_TRPD); data &= mask; } } @@ -475,7 +485,7 @@ static void southbridge_smi_monitor(void) if (!(trap_cycle & (1 << 24))) { /* Write Cycle */ - pcr_read32(PID_PSTH, R_PCH_PCR_PSTH_TRPD, &data); + data = pcr_read32(PID_PSTH, PCR_PSTH_TRPD); printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data); } #undef IOTRAP |