diff options
Diffstat (limited to 'src/soc')
| -rwxr-xr-x | src/soc/broadcom/cygnus/ddr_init.c | 38 | ||||
| -rw-r--r-- | src/soc/broadcom/cygnus/ddr_init_table.c | 2 |
2 files changed, 20 insertions, 20 deletions
diff --git a/src/soc/broadcom/cygnus/ddr_init.c b/src/soc/broadcom/cygnus/ddr_init.c index a8369ec210..f885cec5c6 100755 --- a/src/soc/broadcom/cygnus/ddr_init.c +++ b/src/soc/broadcom/cygnus/ddr_init.c @@ -45,7 +45,7 @@ extern unsigned int ddr3_init_tab_1066[]; #define CONFIG_DRAM_FREQ 667 extern unsigned int ddr3_init_tab_1333[]; #endif -#ifdef CONFIG_CYGNUS_DDR800 +#if IS_ENABLED(CONFIG_CYGNUS_DDR800) #define CONFIG_DRAM_FREQ 800 extern unsigned int ddr3_init_tab_1600[]; #endif @@ -64,7 +64,7 @@ int cygnus_phy_powerup(void); void ddr_init2(void); void PRE_SRX(void); -#if defined(CONFIG_SOC_BROADCOM_CYGNUS) +#if IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) void PRE_SRX(void) { uint32_t readvalue = 0; @@ -281,7 +281,7 @@ void iproc_clear_ecc_syndrome(void) } #endif -#if defined(CONFIG_SOC_BROADCOM_CYGNUS) +#if IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) uint32_t iproc_get_ddr3_clock_mhz(uint32_t unit) { uint32_t ndiv, mdiv, pdiv, ddrclk, data; @@ -306,7 +306,7 @@ uint32_t iproc_get_ddr3_clock_mhz(uint32_t unit) #endif -#if defined(CONFIG_SOC_BROADCOM_CYGNUS) +#if IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) int cygnus_phy_powerup(void) { @@ -1187,7 +1187,7 @@ static int clear_ddr(uint32_t offset, uint32_t size) extern void restore_shmoo_config(and28_shmoo_config_param_t *shmoo_control_para); #endif -#if defined(CONFIG_SOC_BROADCOM_CYGNUS) +#if IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) static int simple_ddr_crc32_check(void) { return 0; @@ -1226,7 +1226,7 @@ void ddr_init2(void) uint32_t status, sku_id, ddr_clk, dev_id = 0; uint32_t unit = 0; uint32_t skip_shmoo = 0; -#if defined(CONFIG_SOC_BROADCOM_CYGNUS) +#if IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) uint32_t pwrctli0 = reg32_read((volatile uint32_t *)IHOST_SCU_POWER_STATUS) & 0x3; skip_shmoo = reg32_read((volatile uint32_t *)CRMU_IHOST_POR_WAKEUP_FLAG) & 0x1; @@ -1239,22 +1239,22 @@ void ddr_init2(void) skip_shmoo = 1; reg32_write((volatile uint32_t *)IHOST_GTIM_GLOB_CTRL, reg32_read((volatile uint32_t *)IHOST_GTIM_GLOB_CTRL)| 0x1); } -#endif /* defined(CONFIG_SOC_BROADCOM_CYGNUS) */ +#endif /* IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) */ dev_id = dev_id; -#ifdef CONFIG_SOC_BROADCOM_CYGNUS +#if IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) and28_shmoo_dram_info_t sdi; and28_shmoo_config_param_t config_param; #endif -#ifndef CONFIG_SOC_BROADCOM_CYGNUS +#if !IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) dev_id = (reg32_read((volatile uint32_t *)ChipcommonA_ChipID)) & 0x0000ffff; #else dev_id = 0x5800; cygnus_phy_powerup(); #endif -#if defined(CONFIG_SOC_BROADCOM_CYGNUS) +#if IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) sku_id = (reg32_read((volatile uint32_t *)ROM_S0_IDM_IO_STATUS) >> 8) & 0x0f; #else sku_id = (reg32_read((volatile uint32_t *)ROM_S0_IDM_IO_STATUS) >> 2) & 0x03; @@ -1279,7 +1279,7 @@ void ddr_init2(void) goto done; } printk(BIOS_INFO, "DDR type: DDR%d\n", (ddr_type == 1)? 3 : 4); -#elif defined(CONFIG_SOC_BROADCOM_CYGNUS) +#elif IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) ddr_type = 1; #else ddr_type = reg32_read((volatile uint32_t *)DDR_S1_IDM_IO_STATUS) & 0x1; @@ -1337,7 +1337,7 @@ void ddr_init2(void) } #endif /* defined(CONFIG_IPROC_P7) */ -#if defined(CONFIG_SOC_BROADCOM_CYGNUS) || defined(CONFIG_IPROC_P7) +#if IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) || defined(CONFIG_IPROC_P7) /* Get the DDR S1 and S2 out of reset */ reg32_write((volatile uint32_t *)DDR_S1_IDM_RESET_CONTROL, 0); reg32_write((volatile uint32_t *)DDR_S2_IDM_RESET_CONTROL, 0); @@ -1357,7 +1357,7 @@ void ddr_init2(void) reg32_write((volatile uint32_t *)DDR_S2_IDM_RESET_CONTROL, 0); /* Set the ddr_ck to 400 MHz, 2x memc clock */ reg32_write_masked((volatile uint32_t *)DDR_S1_IDM_IO_CONTROL_DIRECT, 0xfff << 16, /*ddr_clk*/ 0x190 << 16); -#endif /* defined(CONFIG_SOC_BROADCOM_CYGNUS) || defined(CONFIG_IPROC_P7) */ +#endif /* IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) || defined(CONFIG_IPROC_P7) */ #if defined(CONFIG_IPROC_P7) if (is_ddr_32bit()) { @@ -1398,7 +1398,7 @@ void ddr_init2(void) return; } -#if defined(CONFIG_SOC_BROADCOM_CYGNUS) +#if IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) if(!skip_shmoo) { printk(BIOS_INFO, "ddr_init2: Calling soc_and28_shmoo_dram_info_set\n"); @@ -1433,7 +1433,7 @@ void ddr_init2(void) #error "DRAM config is not set" #endif -#if defined(CONFIG_SOC_BROADCOM_CYGNUS) +#if IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) if(!skip_shmoo) { printk(BIOS_INFO, "ddr_init2: Calling soc_and28_shmoo_phy_init\n"); @@ -1481,7 +1481,7 @@ void ddr_init2(void) ddr_init_regs(ddr3_init_tab_1333); break; #endif -#if (defined(CONFIG_DDR750) || defined(CONFIG_CYGNUS_DDR800)) +#if (defined(CONFIG_DDR750) || IS_ENABLED(CONFIG_CYGNUS_DDR800)) case 750: case 800: ddr_init_regs(ddr3_init_tab_1600); @@ -1514,7 +1514,7 @@ void ddr_init2(void) /* Start the DDR */ reg32_set_bits((volatile uint32_t *)DDR_DENALI_CTL_00, 0x01); -#if defined(CONFIG_SOC_BROADCOM_CYGNUS) +#if IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) if(!skip_shmoo) { while(!(reg32_read((volatile uint32_t *)DDR_DENALI_CTL_175) & 0x100)); @@ -1605,7 +1605,7 @@ void ddr_init2(void) //dump_phy_regs(); -#if defined(CONFIG_SOC_BROADCOM_CYGNUS) +#if IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) /* SRX */ if(skip_shmoo) { @@ -1652,7 +1652,7 @@ wakeup: "ldr r5, [r3]\n" "mov lr, #0\n" "mov pc, r5\n"); -#endif /* defined(CONFIG_SOC_BROADCOM_CYGNUS) */ +#endif /* IS_ENABLED(CONFIG_SOC_BROADCOM_CYGNUS) */ done: /* Reclaim everything we have previously allocated for temporary usage. */ diff --git a/src/soc/broadcom/cygnus/ddr_init_table.c b/src/soc/broadcom/cygnus/ddr_init_table.c index d9258958c7..7c8a89f3bc 100644 --- a/src/soc/broadcom/cygnus/ddr_init_table.c +++ b/src/soc/broadcom/cygnus/ddr_init_table.c @@ -1488,7 +1488,7 @@ const unsigned int ddr3_init_tab_1333[] = { }; #endif -#ifdef CONFIG_CYGNUS_DDR800 +#if IS_ENABLED(CONFIG_CYGNUS_DDR800) const unsigned int ddr3_init_tab_1600[] = { 14, 0x01000000, 36, 0x0a140a0a, |