4 files changed, 9 insertions, 225 deletions
diff --git a/src/soc/intel/braswell/Kconfig b/src/soc/intel/braswell/Kconfig
index ab99a08724..043dc1a43a 100644
--- a/src/soc/intel/braswell/Kconfig
+++ b/src/soc/intel/braswell/Kconfig
@@ -47,6 +47,7 @@ config CPU_SPECIFIC_OPTIONS
 	select TSC_SYNC_MFENCE
 	select UDELAY_TSC
 	select USE_GENERIC_FSP_CAR_INC
+	select HAVE_INTEL_FIRMWARE
 
 config BOOTBLOCK_CPU_INIT
 	string
@@ -116,19 +117,6 @@ config RESET_ON_INVALID_RAMSTAGE_CACHE
 	  the system will reset otherwise the ramstage will be reloaded from
 	  cbfs.
 
-config LOCK_MANAGEMENT_ENGINE
-	bool "Lock Management Engine section"
-	default n
-	help
-	  The Intel Management Engine supports preventing write accesses
-	  from the host to the Management Engine section in the firmware
-	  descriptor. If the ME section is locked, it can only be overwritten
-	  with an external SPI flash programmer. You will want this if you
-	  want to increase security of your ROM image once you are sure
-	  that the ME firmware is no longer going to change.
-
-	  If unsure, say N.
-
 config ENABLE_BUILTIN_COM1
 	bool "Enable builtin COM1 Serial Port"
 	default n
@@ -138,66 +126,18 @@ config ENABLE_BUILTIN_COM1
 	  the debug console.
 
 config HAVE_IFD_BIN
-	bool
-	default y
+	def_bool y
 
 config BUILD_WITH_FAKE_IFD
-	bool "Build with a fake IFD"
-	default y if !HAVE_IFD_BIN
-	help
-	  If you don't have an Intel Firmware Descriptor (ifd.bin) for your
-	  board, you can select this option and coreboot will build without it.
-	  Though, the resulting coreboot.rom will not contain all parts required
-	  to get coreboot running on your board. You can however write only the
-	  BIOS section to your board's flash ROM and keep the other sections
-	  untouched. Unfortunately the current version of flashrom doesn't
-	  support this yet. But there is a patch pending [1].
-
-	  WARNING: Never write a complete coreboot.rom to your flash ROM if it
-		   was built with a fake IFD. It just won't work.
-
-	  [1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html
+	def_bool !HAVE_IFD_BIN
 
 config HAVE_ME_BIN
-	bool "Add Intel Management Engine firmware"
-	default y
-	help
-	  The Intel processor in the selected system requires a special firmware
-	  for an integrated controller called Management Engine (ME). The ME
-	  firmware might be provided in coreboot's 3rdparty/blobs repository. If
-	  not and if you don't have the firmware elsewhere, you can still
-	  build coreboot without it. In this case however, you'll have to make
-	  sure that you don't overwrite your ME firmware on your flash ROM.
+	def_bool y
 
 config IED_REGION_SIZE
 	hex
 	default 0x400000
 
-config IFD_BIN_PATH
-	string "Path to intel firmware descriptor"
-	depends on !BUILD_WITH_FAKE_IFD
-	default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin"
-
-config IFD_BIOS_SECTION
-	depends on BUILD_WITH_FAKE_IFD
-	string
-	default ""
-
-config IFD_ME_SECTION
-	depends on BUILD_WITH_FAKE_IFD
-	string
-	default ""
-
-config IFD_PLATFORM_SECTION
-	depends on BUILD_WITH_FAKE_IFD
-	string
-	default ""
-
-config ME_BIN_PATH
-	string "Path to management engine firmware"
-	depends on HAVE_ME_BIN
-	default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin"
-
 config CHIPSET_BOOTBLOCK_INCLUDE
 	string
 	default "soc/intel/braswell/bootblock/timestamp.inc"
diff --git a/src/soc/intel/braswell/Makefile.inc b/src/soc/intel/braswell/Makefile.inc
index fae97b8219..eda9f76119 100644
--- a/src/soc/intel/braswell/Makefile.inc
+++ b/src/soc/intel/braswell/Makefile.inc
@@ -8,6 +8,7 @@ subdirs-y += ../../../cpu/x86/smm
 subdirs-y += ../../../cpu/x86/tsc
 subdirs-y += ../../../cpu/intel/microcode
 subdirs-y += ../../../cpu/intel/turbo
+subdirs-y += ../../../southbridge/intel/common/firmware
 
 romstage-y += gpio_support.c
 romstage-y += iosf.c
@@ -56,54 +57,4 @@ CPPFLAGS_common += -I$(src)/soc/intel/braswell/include
 
 CPPFLAGS_common += -I3rdparty/blobs/mainboard/$(CONFIG_MAINBOARD_DIR)
 
-# Run an intermediate step when producing coreboot.rom
-# that adds additional components to the final firmware
-# image outside of CBFS
-INTERMEDIATE := pch_add_me
-
-ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y)
-IFD_BIN_PATH := $(objgenerated)/ifdfake.bin
-IFD_SECTIONS := $(addprefix -b ,$(CONFIG_IFD_BIOS_SECTION:"%"=%)) \
-		$(addprefix -m ,$(CONFIG_IFD_ME_SECTION:"%"=%)) \
-		$(addprefix -p ,$(CONFIG_IFD_PLATFORM_SECTION:"%"=%))
-else
-IFD_BIN_PATH := $(CONFIG_IFD_BIN_PATH)
-endif
-
-pch_add_me: $(obj)/coreboot.pre $(IFDTOOL) $(IFDFAKE)
-ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y)
-	printf "\n** WARNING **\n"
-	printf "Coreboot will be built with a fake Intel Firmware Descriptor (IFD).\n"
-	printf "Never write a complete coreboot.rom with a fake IFD to your board's\n"
-	printf "flash ROM! Make sure that you only write valid flash regions.\n\n"
-	printf "    IFDFAKE    Building a fake Intel Firmware Descriptor\n"
-	$(IFDFAKE) $(IFD_SECTIONS) $(IFD_BIN_PATH)
-endif
-	printf "    DD         Adding Intel Firmware Descriptor\n"
-	printf "CONFIG_IFD_BIN_PATH: $(CONFIG_IFD_BIN_PATH)\n"
-	printf "IFD_BIN_PATH: $(IFD_BIN_PATH)\n"
-	dd if=$(IFD_BIN_PATH) \
-		of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1
-	printf "CONFIG_HAVE_ME_BIN: $(CONFIG_HAVE_ME_BIN)\n"
-ifeq ($(CONFIG_HAVE_ME_BIN),y)
-	printf "    IFDTOOL    me.bin -> coreboot.pre\n"
-	printf "CONFIG_ME_BIN_PATH: $(CONFIG_ME_BIN_PATH)\n"
-	$(objutil)/ifdtool/ifdtool \
-		-i ME:$(CONFIG_ME_BIN_PATH) \
-		$(obj)/coreboot.pre
-	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
-endif
-
-ifeq ($(CONFIG_LOCK_MANAGEMENT_ENGINE),y)
-	printf "    IFDTOOL    Locking Management Engine\n"
-	$(objutil)/ifdtool/ifdtool -l $(obj)/coreboot.pre
-	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
-else
-	printf "    IFDTOOL    Unlocking Management Engine\n"
-	$(objutil)/ifdtool/ifdtool -u $(obj)/coreboot.pre
-	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
-endif
-
-PHONY += pch_add_me
-
 endif
diff --git a/src/soc/intel/broadwell/Kconfig b/src/soc/intel/broadwell/Kconfig
index c2db2a1e52..e01d5598ec 100644
--- a/src/soc/intel/broadwell/Kconfig
+++ b/src/soc/intel/broadwell/Kconfig
@@ -41,6 +41,7 @@ config CPU_SPECIFIC_OPTIONS
 	select TSC_SYNC_MFENCE
 	select UDELAY_TSC
 	select SOC_INTEL_COMMON
+	select HAVE_INTEL_FIRMWARE
 
 config BOOTBLOCK_CPU_INIT
 	string
@@ -203,74 +204,10 @@ config REFCODE_BLOB_FILE
 endif # HAVE_REFCODE_BLOB
 
 config HAVE_ME_BIN
-	bool "Add Intel Management Engine firmware"
-	default y
-	help
-	  The Intel processor in the selected system requires a special firmware
-	  for an integrated controller called Management Engine (ME). The ME
-	  firmware might be provided in coreboot's 3rdparty/blobs repository. If
-	  not and if you don't have the firmware elsewhere, you can still
-	  build coreboot without it. In this case however, you'll have to make
-	  sure that you don't overwrite your ME firmware on your flash ROM.
-
-config ME_BIN_PATH
-	string "Path to management engine firmware"
-	depends on HAVE_ME_BIN
-	default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin"
-
-config HAVE_IFD_BIN
-	bool "Use Intel Firmware Descriptor from existing binary"
-	default n
+	def_bool y
 
 config BUILD_WITH_FAKE_IFD
-	bool "Build with a fake IFD"
-	default y if !HAVE_IFD_BIN
-	help
-	  If you don't have an Intel Firmware Descriptor (ifd.bin) for your
-	  board, you can select this option and coreboot will build without it.
-	  Though, the resulting coreboot.rom will not contain all parts required
-	  to get coreboot running on your board. You can however write only the
-	  BIOS section to your board's flash ROM and keep the other sections
-	  untouched. Unfortunately the current version of flashrom doesn't
-	  support this yet. But there is a patch pending [1].
-
-	  WARNING: Never write a complete coreboot.rom to your flash ROM if it
-		   was built with a fake IFD. It just won't work.
-
-	  [1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html
-
-config IFD_BIOS_SECTION
-	depends on BUILD_WITH_FAKE_IFD
-	string
-	default ""
-
-config IFD_ME_SECTION
-	depends on BUILD_WITH_FAKE_IFD
-	string
-	default ""
-
-config IFD_PLATFORM_SECTION
-	depends on BUILD_WITH_FAKE_IFD
-	string
-	default ""
-
-config IFD_BIN_PATH
-	string "Path to intel firmware descriptor"
-	depends on !BUILD_WITH_FAKE_IFD
-	default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin"
-
-config LOCK_MANAGEMENT_ENGINE
-	bool "Lock Management Engine section"
-	default n
-	help
-	  The Intel Management Engine supports preventing write accesses
-	  from the host to the Management Engine section in the firmware
-	  descriptor. If the ME section is locked, it can only be overwritten
-	  with an external SPI flash programmer. You will want this if you
-	  want to increase security of your ROM image once you are sure
-	  that the ME firmware is no longer going to change.
-
-	  If unsure, say N.
+	def_bool !HAVE_IFD_BIN
 
 config CHIPSET_BOOTBLOCK_INCLUDE
 	string
diff --git a/src/soc/intel/broadwell/Makefile.inc b/src/soc/intel/broadwell/Makefile.inc
index ca295fc0d0..183c40fac4 100644
--- a/src/soc/intel/broadwell/Makefile.inc
+++ b/src/soc/intel/broadwell/Makefile.inc
@@ -8,6 +8,7 @@ subdirs-y += ../../../cpu/x86/smm
 subdirs-y += ../../../cpu/x86/tsc
 subdirs-y += ../../../cpu/intel/microcode
 subdirs-y += ../../../cpu/intel/turbo
+subdirs-y += ../../../southbridge/intel/common/firmware
 
 ramstage-y += acpi.c
 ramstage-y += adsp.c
@@ -75,51 +76,6 @@ endif
 
 CPPFLAGS_common += -Isrc/soc/intel/broadwell/include
 
-# Run an intermediate step when producing coreboot.rom
-# that adds additional components to the final firmware
-# image outside of CBFS
-INTERMEDIATE := broadwell_add_me
-
-ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y)
-IFD_BIN_PATH := $(objgenerated)/ifdfake.bin
-IFD_SECTIONS := $(addprefix -b ,$(CONFIG_IFD_BIOS_SECTION:"%"=%)) \
-		$(addprefix -m ,$(CONFIG_IFD_ME_SECTION:"%"=%)) \
-		$(addprefix -p ,$(CONFIG_IFD_PLATFORM_SECTION:"%"=%))
-else
-IFD_BIN_PATH := $(CONFIG_IFD_BIN_PATH)
-endif
-
-broadwell_add_me: $(obj)/coreboot.pre $(IFDTOOL) $(IFDFAKE)
-ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y)
-	printf "\n** WARNING **\n"
-	printf "Coreboot will be built with a fake Intel Firmware Descriptor (IFD).\n"
-	printf "Never write a complete coreboot.rom with a fake IFD to your board's\n"
-	printf "flash ROM! Make sure that you only write valid flash regions.\n\n"
-	printf "    IFDFAKE    Building a fake Intel Firmware Descriptor\n"
-	$(IFDFAKE) $(IFD_SECTIONS) $(IFD_BIN_PATH)
-endif
-	printf "    DD         Adding Intel Firmware Descriptor\n"
-	dd if=$(IFD_BIN_PATH) \
-		of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1
-ifeq ($(CONFIG_HAVE_ME_BIN),y)
-	printf "    IFDTOOL    me.bin -> coreboot.pre\n"
-	$(objutil)/ifdtool/ifdtool \
-		-i ME:$(CONFIG_ME_BIN_PATH) \
-		$(obj)/coreboot.pre
-	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
-ifeq ($(CONFIG_LOCK_MANAGEMENT_ENGINE),y)
-	printf "    IFDTOOL    Locking Management Engine\n"
-	$(objutil)/ifdtool/ifdtool -l $(obj)/coreboot.pre
-	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
-else
-	printf "    IFDTOOL    Unlocking Management Engine\n"
-	$(objutil)/ifdtool/ifdtool -u $(obj)/coreboot.pre
-	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
-endif
-endif
-
-PHONY += broadwell_add_me
-
 # If an MRC file is an ELF file determine the entry address and first loadable
 # section offset in the file. Subtract the offset from the entry address to
 # determine the final location.