diff options
Diffstat (limited to 'src/soc')
| -rw-r--r-- | src/soc/intel/common/block/gspi/Kconfig | 12 | ||||
| -rw-r--r-- | src/soc/intel/common/block/gspi/Makefile.inc | 4 | ||||
| -rw-r--r-- | src/soc/intel/common/block/gspi/gspi.c | 635 | ||||
| -rw-r--r-- | src/soc/intel/common/block/include/intelblocks/gspi.h | 68 |
4 files changed, 719 insertions, 0 deletions
diff --git a/src/soc/intel/common/block/gspi/Kconfig b/src/soc/intel/common/block/gspi/Kconfig new file mode 100644 index 0000000000..a5455a38db --- /dev/null +++ b/src/soc/intel/common/block/gspi/Kconfig @@ -0,0 +1,12 @@ +config SOC_INTEL_COMMON_BLOCK_GSPI + bool + help + Intel Processor Common GSPI support + +config SOC_INTEL_COMMON_BLOCK_GSPI_MAX + int + depends on SOC_INTEL_COMMON_BLOCK_GSPI + help + Maximum number of GSPI controllers supported by the PCH. SoC + must define this config if SOC_INTEL_COMMON_BLOCK_GSPI is + selected. diff --git a/src/soc/intel/common/block/gspi/Makefile.inc b/src/soc/intel/common/block/gspi/Makefile.inc new file mode 100644 index 0000000000..85cb18ebb8 --- /dev/null +++ b/src/soc/intel/common/block/gspi/Makefile.inc @@ -0,0 +1,4 @@ +bootblock-$(CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI) += gspi.c +romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI) += gspi.c +ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI) += gspi.c +verstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI) += gspi.c diff --git a/src/soc/intel/common/block/gspi/gspi.c b/src/soc/intel/common/block/gspi/gspi.c new file mode 100644 index 0000000000..f3c146057e --- /dev/null +++ b/src/soc/intel/common/block/gspi/gspi.c @@ -0,0 +1,635 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/early_variables.h> +#include <arch/io.h> +#include <assert.h> +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <intelblocks/gspi.h> +#include <string.h> +#include <timer.h> + +/* GSPI Memory Mapped Registers */ +#define SSCR0 0x0 /* SSP Control Register 0 */ +#define SSCR0_EDSS_0 (0 << 20) +#define SSCR0_EDSS_1 (1 << 20) +#define SSCR0_SCR_SHIFT (8) +#define SSCR0_SCR_MASK (0xFFF) +#define SSCR0_SSE_DISABLE (0 << 7) +#define SSCR0_SSE_ENABLE (1 << 7) +#define SSCR0_ECS_ON_CHIP (0 << 6) +#define SSCR0_FRF_MOTOROLA (0 << 4) +#define SSCR0_DSS_SHIFT (0) +#define SSCR0_DSS_MASK (0xF) +#define SSCR1 0x4 /* SSP Control Register 1 */ +#define SSCR1_IFS_LOW (0 << 16) +#define SSCR1_IFS_HIGH (1 << 16) +#define SSCR1_SPH_FIRST (0 << 4) +#define SSCR1_SPH_SECOND (1 << 4) +#define SSCR1_SPO_LOW (0 << 3) +#define SSCR1_SPO_HIGH (1 << 3) +#define SSSR 0x8 /* SSP Status Register */ +#define SSSR_TUR (1 << 21) /* Tx FIFO underrun */ +#define SSSR_TINT (1 << 19) /* Rx Time-out interrupt */ +#define SSSR_PINT (1 << 18) /* Peripheral trailing byte + interrupt */ +#define SSSR_ROR (1 << 7) /* Rx FIFO Overrun */ +#define SSSR_BSY (1 << 4) /* SSP Busy */ +#define SSSR_RNE (1 << 3) /* Receive FIFO not empty */ +#define SSSR_TNF (1 << 2) /* Transmit FIFO not full */ +#define SSDR 0x10 /* SSP Data Register */ +#define SSTO 0x28 /* SSP Time out */ +#define SITF 0x44 /* SPI Transmit FIFO */ +#define SITF_LEVEL_SHIFT (16) +#define SITF_LEVEL_MASK (0x3f) +#define SITF_LWM_SHIFT (8) +#define SITF_LWM_MASK (0x3f) +#define SITF_LWM(x) ((((x) - 1) & SITF_LWM_MASK) << SITF_LWM_SHIFT) +#define SITF_HWM_SHIFT (0) +#define SITF_HWM_MASK (0x3f) +#define SITF_HWM(x) ((((x) - 1) & SITF_HWM_MASK) << SITF_HWM_SHIFT) +#define SIRF 0x48 /* SPI Receive FIFO */ +#define SIRF_LEVEL_SHIFT (8) +#define SIRF_LEVEL_MASK (0x3f) +#define SIRF_WM_SHIFT (0) +#define SIRF_WM_MASK (0x3f) +#define SIRF_WM(x) ((((x) - 1) & SIRF_WM_MASK) << SIRF_WM_SHIFT) + +/* GSPI Additional Registers */ +#define CLOCKS 0x200 /* Clocks */ +#define CLOCKS_UPDATE (1 << 31) +#define CLOCKS_N_SHIFT (16) +#define CLOCKS_N_MASK (0x7fff) +#define CLOCKS_M_SHIFT (1) +#define CLOCKS_M_MASK (0x7fff) +#define CLOCKS_DISABLE (0 << 0) +#define CLOCKS_ENABLE (1 << 0) +#define RESETS 0x204 /* Resets */ +#define DMA_RESET (0 << 2) +#define DMA_ACTIVE (1 << 2) +#define CTRLR_RESET (0 << 0) +#define CTRLR_ACTIVE (3 << 0) +#define ACTIVELTR_VALUE 0x210 /* Active LTR */ +#define IDLELTR_VALUE 0x214 /* Idle LTR Value */ +#define TX_BIT_COUNT 0x218 /* Tx Bit Count */ +#define RX_BIT_COUNT 0x21c /* Rx Bit Count */ +#define SSP_REG 0x220 /* SSP Reg */ +#define DMA_FINISH_DISABLE (1 << 0) +#define SPI_CS_CONTROL 0x224 /* SPI CS Control */ +#define CS_POLARITY_LOW (0 << 12) +#define CS_POLARITY_HIGH (1 << 12) +#define CS_0 (0 << 8) +#define CS_STATE_LOW (0 << 1) +#define CS_STATE_HIGH (1 << 1) +#define CS_STATE_MASK (1 << 1) +#define CS_MODE_HW (0 << 0) +#define CS_MODE_SW (1 << 0) + +#define GSPI_DATA_BIT_LENGTH (8) +#define GSPI_BUS_BASE(bar, bus) ((bar) + (bus) * 4 * KiB) + +#if defined(__SIMPLE_DEVICE__) + +static uintptr_t gspi_get_base_addr(int devfn, + ROMSTAGE_CONST struct device *dev) +{ + pci_devfn_t pci_dev = PCI_DEV(0, PCI_SLOT(devfn), PCI_FUNC(devfn)); + return ALIGN_DOWN(pci_read_config32(pci_dev, PCI_BASE_ADDRESS_0), 16); +} + +static void gspi_set_base_addr(int devfn, ROMSTAGE_CONST struct device *dev, + uintptr_t base) +{ + pci_devfn_t pci_dev = PCI_DEV(0, PCI_SLOT(devfn), PCI_FUNC(devfn)); + pci_write_config32(pci_dev, PCI_BASE_ADDRESS_0, base); + pci_write_config32(pci_dev, PCI_COMMAND, PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER); +} + +void gspi_early_bar_init(void) +{ + unsigned int gspi_bus; + const unsigned int gspi_max = CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX; + const struct gspi_cfg *cfg = gspi_get_soc_cfg(); + int devfn; + uintptr_t gspi_base_addr; + + assert(gspi_max != 0); + if (!cfg) { + printk(BIOS_ERR, "%s: No GSPI config provided by SoC!\n", + __func__); + return; + } + + gspi_base_addr = gspi_get_soc_early_base(); + if (!gspi_base_addr) { + printk(BIOS_ERR, "%s: GSPI base address provided is NULL!\n", + __func__); + return; + } + + for (gspi_bus = 0; gspi_bus < gspi_max; gspi_bus++) { + if (!cfg[gspi_bus].early_init) + continue; + devfn = gspi_soc_bus_to_devfn(gspi_bus); + gspi_set_base_addr(devfn, NULL, + GSPI_BUS_BASE(gspi_base_addr, gspi_bus)); + } +} + +#else + +static uintptr_t gspi_get_base_addr(int devfn, struct device *dev) +{ + return ALIGN_DOWN(pci_read_config32(dev, PCI_BASE_ADDRESS_0), 16); +} + +static void gspi_set_base_addr(int devfn, struct device *dev, uintptr_t base) +{ + pci_write_config32(dev, PCI_BASE_ADDRESS_0, base); + pci_write_config32(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER); +} + +#endif + +static uintptr_t gspi_calc_base_addr(unsigned int gspi_bus) +{ + uintptr_t bus_base, gspi_base_addr; + ROMSTAGE_CONST struct device *dev; + int devfn = gspi_soc_bus_to_devfn(gspi_bus); + + if (devfn < 0) + return 0; + + dev = dev_find_slot(0, devfn); + if (!dev || !dev->enabled) + return 0; + + bus_base = gspi_get_base_addr(devfn, dev); + if (bus_base) + return bus_base; + + gspi_base_addr = gspi_get_soc_early_base(); + if (!gspi_base_addr) + return 0; + + bus_base = GSPI_BUS_BASE(gspi_base_addr, gspi_bus); + + gspi_set_base_addr(devfn, dev, bus_base); + return bus_base; +} + +static uint32_t gspi_get_bus_clk_mhz(unsigned int gspi_bus) +{ + const struct gspi_cfg *cfg = gspi_get_soc_cfg(); + if (!cfg) + return 0; + return cfg[gspi_bus].speed_mhz; +} + +static uintptr_t gspi_base[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX] CAR_GLOBAL; +static uintptr_t gspi_get_bus_base_addr(unsigned int gspi_bus) +{ + uintptr_t *base = car_get_var_ptr(gspi_base); + + if (!base[gspi_bus]) + base[gspi_bus] = gspi_calc_base_addr(gspi_bus); + + return base[gspi_bus]; +} + +/* Parameters for GSPI controller operation. */ +struct gspi_ctrlr_params { + uintptr_t mmio_base; + unsigned int gspi_bus; + uint8_t *in; + size_t bytesin; + const uint8_t *out; + size_t bytesout; +}; + +static uint32_t gspi_read_mmio_reg(const struct gspi_ctrlr_params *p, + uint32_t offset) +{ + assert(p->mmio_base != 0); + return read32((void *)(p->mmio_base + offset)); +} + +static void gspi_write_mmio_reg(const struct gspi_ctrlr_params *p, + uint32_t offset, uint32_t value) +{ + assert(p->mmio_base != 0); + write32((void *)(p->mmio_base + offset), value); +} + +static int gspi_ctrlr_params_init(struct gspi_ctrlr_params *p, + unsigned int spi_bus) +{ + memset(p, 0, sizeof(*p)); + + if (gspi_soc_spi_to_gspi_bus(spi_bus, &p->gspi_bus)) { + printk(BIOS_ERR, "%s: No GSPI bus available for SPI bus %u.\n", + __func__, spi_bus); + return -1; + } + + p->mmio_base = gspi_get_bus_base_addr(p->gspi_bus); + if (!p->mmio_base) { + printk(BIOS_ERR, "%s: Base addr is 0 for GSPI bus=%u.\n", + __func__, p->gspi_bus); + return -1; + } + + return 0; +} + +enum cs_assert { + CS_ASSERT, + CS_DEASSERT, +}; + +static void __gspi_cs_change(const struct gspi_ctrlr_params *p, + enum cs_assert cs_assert) +{ + uint32_t cs_ctrl, state; + cs_ctrl = gspi_read_mmio_reg(p, SPI_CS_CONTROL); + + cs_ctrl &= ~CS_STATE_MASK; + + if (cs_ctrl & CS_POLARITY_HIGH) + state = (cs_assert == CS_ASSERT) ? CS_STATE_HIGH : CS_STATE_LOW; + else + state = (cs_assert == CS_ASSERT) ? CS_STATE_LOW : CS_STATE_HIGH; + + cs_ctrl |= state; + + gspi_write_mmio_reg(p, SPI_CS_CONTROL, cs_ctrl); +} + +static int gspi_cs_change(const struct spi_slave *dev, enum cs_assert cs_assert) +{ + struct gspi_ctrlr_params params, *p = ¶ms; + + if (gspi_ctrlr_params_init(p, dev->bus)) + return -1; + + __gspi_cs_change(p, cs_assert); + + return 0; +} + +int __attribute__((weak)) gspi_get_soc_spi_cfg(unsigned int gspi_bus, + struct spi_cfg *cfg) +{ + cfg->clk_phase = SPI_CLOCK_PHASE_FIRST; + cfg->clk_polarity = SPI_POLARITY_LOW; + cfg->cs_polarity = SPI_POLARITY_LOW; + cfg->wire_mode = SPI_4_WIRE_MODE; + cfg->data_bit_length = GSPI_DATA_BIT_LENGTH; + + return 0; +} + +static int gspi_ctrlr_get_config(const struct spi_slave *dev, + struct spi_cfg *cfg) +{ + unsigned int gspi_bus; + + /* Currently, only chip select 0 is supported. */ + if (dev->cs != 0) { + printk(BIOS_ERR, "%s: Invalid CS value: cs=%u.\n", __func__, + dev->cs); + return -1; + } + + if (gspi_soc_spi_to_gspi_bus(dev->bus, &gspi_bus)) { + printk(BIOS_ERR, "%s: Failed to find GSPI bus for SPI %u.\n", + __func__, dev->bus); + return -1; + } + return gspi_get_soc_spi_cfg(gspi_bus, cfg); +} + +static int gspi_cs_assert(const struct spi_slave *dev) +{ + return gspi_cs_change(dev, CS_ASSERT); +} + +static void gspi_cs_deassert(const struct spi_slave *dev) +{ + gspi_cs_change(dev, CS_DEASSERT); +} + +static uint32_t gspi_get_clk_div(unsigned int gspi_bus) +{ + const uint32_t ref_clk_mhz = CONFIG_SOC_INTEL_COMMON_LPSS_CLOCK_MHZ; + const uint32_t gspi_clk_mhz = gspi_get_bus_clk_mhz(gspi_bus); + + assert(gspi_clk_mhz != 0); + assert(ref_clk_mhz != 0); + return (DIV_ROUND_UP(ref_clk_mhz, gspi_clk_mhz) - 1) & SSCR0_SCR_MASK; +} + +static int gspi_ctrlr_setup(const struct spi_slave *dev) +{ + struct spi_cfg cfg; + uint32_t cs_ctrl, sscr0, sscr1, clocks, sitf, sirf; + struct gspi_ctrlr_params params, *p = ¶ms; + + /* Only chip select 0 is supported. */ + if (dev->cs != 0) { + printk(BIOS_ERR, "%s: Invalid CS value: cs=%u.\n", __func__, + dev->cs); + return -1; + } + + if (gspi_ctrlr_params_init(p, dev->bus)) + return -1; + + /* Obtain SPI bus configuration for the device. */ + if (gspi_get_soc_spi_cfg(p->gspi_bus, &cfg)) { + printk(BIOS_ERR, "%s: Failed to get config for bus=%u.\n", + __func__, p->gspi_bus); + return -1; + } + + /* Take controller out of reset, keeping DMA in reset. */ + gspi_write_mmio_reg(p, RESETS, CTRLR_ACTIVE | DMA_RESET); + + /* De-assert chip select. */ + __gspi_cs_change(p, CS_DEASSERT); + + /* + * CS control: + * - Set SW mode. + * - Set chip select to 0. + * - Set polarity based on device configuration. + * - Do not assert CS. + */ + cs_ctrl = CS_MODE_SW | CS_0; + if (cfg.cs_polarity == SPI_POLARITY_LOW) + cs_ctrl |= CS_POLARITY_LOW | CS_STATE_HIGH; + else + cs_ctrl |= CS_POLARITY_HIGH | CS_STATE_LOW; + gspi_write_mmio_reg(p, SPI_CS_CONTROL, cs_ctrl); + + /* Disable SPI controller. */ + gspi_write_mmio_reg(p, SSCR0, SSCR0_SSE_DISABLE); + + /* + * SSCR0 configuration: + * clk_div - Based on reference clock and expected clock frequency. + * data bit length - assumed to be 8, hence EDSS = 0. + * ECS - Use on-chip clock + * FRF - Frame format set to Motorola SPI + */ + sscr0 = gspi_get_clk_div(p->gspi_bus) << SSCR0_SCR_SHIFT; + assert(GSPI_DATA_BIT_LENGTH == 8); + sscr0 |= ((GSPI_DATA_BIT_LENGTH - 1) << SSCR0_DSS_SHIFT) | SSCR0_EDSS_0; + sscr0 |= SSCR0_ECS_ON_CHIP | SSCR0_FRF_MOTOROLA; + gspi_write_mmio_reg(p, SSCR0, sscr0); + + /* + * SSCR1 configuration: + * - Chip select polarity + * - Clock phase setting + * - Clock polarity + */ + sscr1 = (cfg.cs_polarity == SPI_POLARITY_LOW) ? SSCR1_IFS_LOW : + SSCR1_IFS_HIGH; + sscr1 |= (cfg.clk_phase == SPI_CLOCK_PHASE_FIRST) ? SSCR1_SPH_FIRST : + SSCR1_SPH_SECOND; + sscr1 |= (cfg.clk_polarity == SPI_POLARITY_LOW) ? SSCR1_SPO_LOW : + SSCR1_SPO_HIGH; + gspi_write_mmio_reg(p, SSCR1, sscr1); + + /* + * Program m/n divider. + * Set m and n to 1, so that this divider acts as a pass-through. + */ + clocks = (1 << CLOCKS_N_SHIFT) | (1 << CLOCKS_M_SHIFT) | CLOCKS_ENABLE; + gspi_write_mmio_reg(p, CLOCKS, clocks); + udelay(10); + + /* + * Tx FIFO Threshold. + * Low watermark threshold = 1 + * High watermark threshold = 1 + */ + sitf = SITF_LWM(1) | SITF_HWM(1); + gspi_write_mmio_reg(p, SITF, sitf); + + /* Rx FIFO Threshold (set to 1). */ + sirf = SIRF_WM(1); + gspi_write_mmio_reg(p, SIRF, sirf); + + /* Enable GSPI controller. */ + sscr0 |= SSCR0_SSE_ENABLE; + gspi_write_mmio_reg(p, SSCR0, sscr0); + + return 0; +} + +static uint32_t gspi_read_status(const struct gspi_ctrlr_params *p) +{ + return gspi_read_mmio_reg(p, SSSR); +} + +static void gspi_clear_status(const struct gspi_ctrlr_params *p) +{ + const uint32_t sssr = SSSR_TUR | SSSR_TINT | SSSR_PINT | SSSR_ROR; + gspi_write_mmio_reg(p, SSSR, sssr); +} + +static bool gspi_rx_fifo_empty(const struct gspi_ctrlr_params *p) +{ + return !(gspi_read_status(p) & SSSR_RNE); +} + +static bool gspi_tx_fifo_full(const struct gspi_ctrlr_params *p) +{ + return !(gspi_read_status(p) & SSSR_TNF); +} + +static bool gspi_rx_fifo_overrun(const struct gspi_ctrlr_params *p) +{ + if (gspi_read_status(p) & SSSR_ROR) { + printk(BIOS_ERR, "%s:GSPI receive FIFO overrun!" + " (bus=%u).\n", __func__, p->gspi_bus); + return true; + } + + return false; +} + +/* Read SSDR and return lowest byte. */ +static uint8_t gspi_read_byte(const struct gspi_ctrlr_params *p) +{ + return gspi_read_mmio_reg(p, SSDR) & 0xFF; +} + +/* Write 32-bit word with "data" in lowest byte to SSDR. */ +static void gspi_write_byte(const struct gspi_ctrlr_params *p, uint8_t data) +{ + return gspi_write_mmio_reg(p, SSDR, data); +} + +static void gspi_read_data(struct gspi_ctrlr_params *p) +{ + *(p->in) = gspi_read_byte(p); + p->in++; + p->bytesin--; +} + +static void gspi_write_data(struct gspi_ctrlr_params *p) +{ + gspi_write_byte(p, *(p->out)); + p->out++; + p->bytesout--; +} + +static void gspi_read_dummy(struct gspi_ctrlr_params *p) +{ + gspi_read_byte(p); + p->bytesin--; +} + +static void gspi_write_dummy(struct gspi_ctrlr_params *p) +{ + gspi_write_byte(p, 0); + p->bytesout--; +} + +static int gspi_ctrlr_flush(const struct gspi_ctrlr_params *p) +{ + const uint32_t timeout_ms = 500; + struct stopwatch sw; + + /* Wait 500ms to allow Rx FIFO to be empty. */ + stopwatch_init_msecs_expire(&sw, timeout_ms); + + while (!gspi_rx_fifo_empty(p)) { + if (stopwatch_expired(&sw)) { + printk(BIOS_ERR, "%s: Rx FIFO not empty after 500ms! " + "(bus=%u)\n", __func__, p->gspi_bus); + return -1; + } + + gspi_read_byte(p); + } + + return 0; +} + +static int __gspi_xfer(struct gspi_ctrlr_params *p) +{ + /* + * If bytesin is non-zero, then use gspi_read_data to perform + * byte-by-byte read of data from SSDR and save it to "in" buffer. Else + * discard the read data using gspi_read_dummy. + */ + void (*fn_read)(struct gspi_ctrlr_params *p) = gspi_read_data; + + /* + * If bytesout is non-zero, then use gspi_write_data to perform + * byte-by-byte write of data from "out" buffer to SSDR. Else, use + * gspi_write_dummy to write dummy "0" data to SSDR in order to trigger + * read from slave. + */ + void (*fn_write)(struct gspi_ctrlr_params *p) = gspi_write_data; + + if (!p->bytesin) { + p->bytesin = p->bytesout; + fn_read = gspi_read_dummy; + } + + if (!p->bytesout) { + p->bytesout = p->bytesin; + fn_write = gspi_write_dummy; + } + + while (p->bytesout || p->bytesin) { + if (p->bytesout && !gspi_tx_fifo_full(p)) + fn_write(p); + if (p->bytesin && !gspi_rx_fifo_empty(p)) { + if (gspi_rx_fifo_overrun(p)) + return -1; + fn_read(p); + } + } + + return 0; +} + +static int gspi_ctrlr_xfer(const struct spi_slave *dev, + const void *dout, size_t bytesout, + void *din, size_t bytesin) +{ + struct gspi_ctrlr_params params; + struct gspi_ctrlr_params *p = ¶ms; + + /* + * Assumptions about in and out transfers: + * 1. Both bytesin and bytesout cannot be 0. + * 2. If both bytesin and bytesout are non-zero, then they should be + * equal i.e. if both in and out transfers are to be done in same + * transaction, then they should be equal in length. + * 3. Buffer corresponding to non-zero bytes (bytesin/bytesout) cannot + * be NULL. + */ + if (!bytesin && !bytesout) { + printk(BIOS_ERR, "%s: Both in and out bytes cannot be zero!\n", + __func__); + return -1; + } else if (bytesin && bytesout && (bytesin != bytesout)) { + printk(BIOS_ERR, "%s: bytesin(%zd) != bytesout(%zd)\n", + __func__, bytesin, bytesout); + return -1; + } + if ((bytesin && !din) || (bytesout && !dout)) { + printk(BIOS_ERR, "%s: in/out buffer is NULL!\n", __func__); + return -1; + } + + if (gspi_ctrlr_params_init(p, dev->bus)) + return -1; + + /* Flush out any stale data in Rx FIFO. */ + if (gspi_ctrlr_flush(p)) + return -1; + + /* Clear status bits. */ + gspi_clear_status(p); + + p->in = din; + p->bytesin = bytesin; + p->out = dout; + p->bytesout = bytesout; + + return __gspi_xfer(p); +} + +const struct spi_ctrlr gspi_ctrlr = { + .get_config = gspi_ctrlr_get_config, + .claim_bus = gspi_cs_assert, + .release_bus = gspi_cs_deassert, + .setup = gspi_ctrlr_setup, + .xfer = gspi_ctrlr_xfer, +}; diff --git a/src/soc/intel/common/block/include/intelblocks/gspi.h b/src/soc/intel/common/block/include/intelblocks/gspi.h new file mode 100644 index 0000000000..4e10e25d3e --- /dev/null +++ b/src/soc/intel/common/block/include/intelblocks/gspi.h @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef SOC_INTEL_COMMON_BLOCK_GSPI_H +#define SOC_INTEL_COMMON_BLOCK_GSPI_H + +#include <spi-generic.h> +#include <stdint.h> + +/* GSPI controller structure to allow SoCs to define bus-controller mapping. */ +extern const struct spi_ctrlr gspi_ctrlr; + +struct gspi_cfg { + /* Bus speed in MHz. */ + uint32_t speed_mhz; + /* Bus should be enabled prior to ramstage with temporary base. */ + uint8_t early_init; +}; + +/* GSPI controller APIs. */ +void gspi_early_bar_init(void); + +/* SoC-callbacks */ +/* Get gspi_config array from SoC. Returns NULL in case of error. */ +const struct gspi_cfg *gspi_get_soc_cfg(void); + +/* Get base address for early init of GSPI controllers. */ +uintptr_t gspi_get_soc_early_base(void); + +/* + * Map given SPI bus number to GSPI bus number. + * Return value: + * 0 = success + * -1 = error + */ +int gspi_soc_spi_to_gspi_bus(unsigned int spi_bus, unsigned int *gspi_bus); + +/* + * Map given GSPI bus number to devfn. + * Return value: + * -1 = error + * otherwise, devfn(>=0) corresponding to GSPI bus number. + */ +int gspi_soc_bus_to_devfn(unsigned int gspi_bus); + +/* + * SoC-provided callback for getting configuration of SPI bus. Driver provides + * weak implementation with default SPI-bus configuration. + * + * Return value: + * 0 = Success + * -1 = Error + */ +int gspi_get_soc_spi_cfg(unsigned int bus, struct spi_cfg *cfg); + +#endif /* SOC_INTEL_COMMON_BLOCK_GSPI_H */ |