summaryrefslogtreecommitdiff
path: root/src/soc
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc')
-rw-r--r--src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c38
1 files changed, 36 insertions, 2 deletions
diff --git a/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c b/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c
index 87c3ccbf6e..a52e918ee0 100644
--- a/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c
+++ b/src/soc/nvidia/tegra132/lp0/tegra_lp0_resume.c
@@ -311,6 +311,27 @@ static uint32_t *uart_clk_source_regs[4] = {
(uint32_t *)0x600061c0,
};
+static uint32_t *uart_base_regs[4] = {
+ (uint32_t *)0x70006000,
+ (uint32_t *)0x70006040,
+ (uint32_t *)0x70006200,
+ (uint32_t *)0x70006300,
+};
+enum {
+ UART_THR_DLAB = 0x0,
+ UART_IER_DLAB = 0x1,
+ UART_IIR_FCR = 0x2,
+ UART_LCR = 0x3
+};
+enum {
+ UART_RATE_115200 = (408000000/115200/16), /* based on 408000000 PLLP */
+ FCR_TX_CLR = 0x4, /* bit 2 of FCR : clear TX FIFO */
+ FCR_RX_CLR = 0x2, /* bit 1 of FCR : clear RX FIFO */
+ FCR_EN_FIFO = 0x1, /* bit 0 of FCR : enable TX & RX FIFO */
+ LCR_DLAB = 0x80, /* bit 7 of LCR : Divisor Latch Access Bit */
+ LCR_WD_SIZE_8 = 0x3, /* bit 1:0 of LCR : word length of 8 */
+};
+
static void enable_uart(void)
{
uint32_t *uart_clk_enb_reg;
@@ -318,6 +339,7 @@ static void enable_uart(void)
uint32_t *uart_clk_source;
uint32_t uart_port;
uint32_t uart_mask;
+ uint32_t *uart_base;
/*
* Read odmdata (stored in pmc->odmdata) to determine debug uart port.
@@ -330,14 +352,15 @@ static void enable_uart(void)
*/
uart_port = (read32(pmc_odmdata_ptr) >> 15) & 0x7;
- /* Default to UARTA, since pmc_odmdata is not programmed yet. */
- /* TODO: if (uart_port >= 4) */
+ /* Default to UARTA if uart_port is out of range */
+ if (uart_port >= 4)
uart_port = 0;
uart_clk_enb_reg = uart_clk_out_enb_regs[uart_port];
uart_rst_reg = uart_rst_devices_regs[uart_port];
uart_mask = uart_enable_mask[uart_port];
uart_clk_source = uart_clk_source_regs[uart_port];
+ uart_base = uart_base_regs[uart_port];
/* Enable UART clock */
setbits32(uart_mask, uart_clk_enb_reg);
@@ -348,6 +371,17 @@ static void enable_uart(void)
/* Program UART clock source: PLLP (408000000) */
write32(0, uart_clk_source);
+
+ /* Program 115200n8 to the uart port */
+ /* baud-rate of 115200 */
+ write32(LCR_DLAB, (uart_base + UART_LCR));
+ write32((UART_RATE_115200 & 0xff), (uart_base + UART_THR_DLAB));
+ write32((UART_RATE_115200 >> 8), (uart_base + UART_IER_DLAB));
+ /* 8-bit and no parity */
+ write32(LCR_WD_SIZE_8, (uart_base + UART_LCR));
+ /* enable and clear RX/TX FIFO */
+ write32((FCR_TX_CLR + FCR_RX_CLR + FCR_EN_FIFO),
+ (uart_base + UART_IIR_FCR));
}
/* Accessors. */