diff options
Diffstat (limited to 'src/soc')
| -rw-r--r-- | src/soc/broadcom/cygnus/Makefile.inc | 1 | ||||
| -rw-r--r-- | src/soc/broadcom/cygnus/bootblock.c | 3 | ||||
| -rw-r--r-- | src/soc/broadcom/cygnus/hw_init.c | 733 | ||||
| -rw-r--r-- | src/soc/broadcom/cygnus/include/soc/hw_init.h | 23 |
4 files changed, 760 insertions, 0 deletions
diff --git a/src/soc/broadcom/cygnus/Makefile.inc b/src/soc/broadcom/cygnus/Makefile.inc index e22d38dc31..edeb687c48 100644 --- a/src/soc/broadcom/cygnus/Makefile.inc +++ b/src/soc/broadcom/cygnus/Makefile.inc @@ -21,6 +21,7 @@ bootblock-y += bootblock.c bootblock-y += cbmem.c bootblock-y += i2c.c bootblock-y += timer.c +bootblock-y += hw_init.c bootblock-$(CONFIG_SPI_FLASH) += spi.c ifeq ($(CONFIG_BOOTBLOCK_CONSOLE),y) bootblock-$(CONFIG_DRIVERS_UART) += ns16550.c diff --git a/src/soc/broadcom/cygnus/bootblock.c b/src/soc/broadcom/cygnus/bootblock.c index 3c6d242d76..3c853923aa 100644 --- a/src/soc/broadcom/cygnus/bootblock.c +++ b/src/soc/broadcom/cygnus/bootblock.c @@ -21,6 +21,7 @@ #include <bootblock_common.h> #include <stddef.h> #include <symbols.h> +#include <soc/hw_init.h> void bootblock_soc_init(void) { @@ -33,4 +34,6 @@ void bootblock_soc_init(void) mmu_config_range_kb((uintptr_t)_sram/KiB, _sram_size/KiB, DCACHE_WRITETHROUGH); dcache_mmu_enable(); + + hw_init(); } diff --git a/src/soc/broadcom/cygnus/hw_init.c b/src/soc/broadcom/cygnus/hw_init.c new file mode 100644 index 0000000000..12adf66814 --- /dev/null +++ b/src/soc/broadcom/cygnus/hw_init.c @@ -0,0 +1,733 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <delay.h> +#include <console/console.h> +#include <soc/hw_init.h> + +/***************************************************************************** + * TrustZone + *****************************************************************************/ +#define TZPC_TZPCDECPROT0SET 0x18034804 +#define TZPC_TZPCDECPROT0CLR 0x18034808 +#define TZPC_TZPCDECPROT1SET 0x18034810 +#define TZPC_TZPCDECPROT1CLR 0x18034814 +#define TZPC_TZPCDECPROT2SET 0x1803481c +#define TZPC_TZPCDECPROT2CLR 0x18034820 + +#define TZPCDECPROT0_MASK 0x000000FF +#define TZPCDECPROT1_MASK 0x000000FF +#define TZPCDECPROT2_MASK 0x000000FF + +#define TZ_STATE_SECURE 0 +#define TZ_STATE_NON_SECURE 1 + +#define CYGNUS_M_PCIE0_M0 0x00000003 +#define CYGNUS_M_PCIE1_M0 0x0000000c +#define CYGNUS_M_CMICD_M0 0x00000030 +#define CYGNUS_M_EXT_M0 0x000000c0 + +#define CYGNUS_M_EXT_M1 (0x00000003 << 8) +#define CYGNUS_M_SDIO_M0 (0x0000000c << 8) +#define CYGNUS_M_SDIO_M1 (0x00000030 << 8) +#define CYGNUS_M_AMAC_M0 (0x000000c0 << 8) + +#define CYGNUS_M_AMAC_M1 (0x00000003 << 16) +#define CYGNUS_M_USB2H_M0 (0x0000000c << 16) +#define CYGNUS_M_USB2D_M0 (0x00000030 << 16) +#define CYGNUS_M_A9JTAG_M0 (0x000000c0 << 16) + +#define IPROC_M_PCIE (CYGNUS_M_PCIE0_M0 | CYGNUS_M_PCIE1_M0) +#define IPROC_M_EXT (CYGNUS_M_EXT_M0 | CYGNUS_M_EXT_M1) +#define IPROC_M_SDIO (CYGNUS_M_SDIO_M0 | CYGNUS_M_SDIO_M1) +#define IPROC_M_AMAC (CYGNUS_M_AMAC_M0 | CYGNUS_M_AMAC_M1) +#define IPROC_M_USB (CYGNUS_M_USB2H_M0 | CYGNUS_M_USB2D_M0) +#define IPROC_M_CMICD (CYGNUS_M_CMICD_M0) + +static void tz_set_masters_security(uint32_t masters, uint32_t ns_bit) +{ + uint32_t val = 0; + + /* Check any TZPCDECPROT0 is set and then write to TZPCDECPROT0 */ + if (masters & TZPCDECPROT0_MASK) { + val = masters & TZPCDECPROT0_MASK; + if (ns_bit) + write32((void *)TZPC_TZPCDECPROT0SET, val); + else + write32((void *)TZPC_TZPCDECPROT0CLR, val); + } + /* Check any TZPCDECPROT1 is set and then write to TZPCDECPROT1 */ + if ((masters >> 8) & TZPCDECPROT1_MASK) { + val = (masters >> 8) & TZPCDECPROT1_MASK; + if (ns_bit) + write32((void *)TZPC_TZPCDECPROT1SET, val); + else + write32((void *)TZPC_TZPCDECPROT1CLR, val); + } + /* Check any TZPCDECPROT2 is set and then write to TZPCDECPROT2 */ + if ((masters >> 16) & TZPCDECPROT2_MASK) { + val = (masters >> 16) & TZPCDECPROT2_MASK; + if (ns_bit) + write32((void *)TZPC_TZPCDECPROT2SET, val); + else + write32((void *)TZPC_TZPCDECPROT2CLR, val); + } +} + +/***************************************************************************** + * DMAC + *****************************************************************************/ +#define DMAC_M0_IDM_RESET_CONTROL 0x1810f800 +#define DMAC_RESET_MASK 0x00000001 +#define DMAC_RESET_TIMEOUT 1000 + +static void dmac_init(void) +{ + unsigned int val, timeout; + + /* bring the DMAC block out of reset */ + val = read32((void *)DMAC_M0_IDM_RESET_CONTROL); + val |= DMAC_RESET_MASK; + write32((void *)DMAC_M0_IDM_RESET_CONTROL, val); + udelay(10); + val &= ~DMAC_RESET_MASK; + write32((void *)DMAC_M0_IDM_RESET_CONTROL, val); + + timeout = 0; + while (read32((void *)DMAC_M0_IDM_RESET_CONTROL) & DMAC_RESET_MASK) { + udelay(1); + if (timeout++ > DMAC_RESET_TIMEOUT) + die("Failed to bring PL330 DMAC out of reset\n"); + } +} + +/***************************************************************************** + * Neon + *****************************************************************************/ +#define CRU_CONTROL 0x1800e000 +#define CRU_CONTROL_NEON_RESET_N 0x00000040 + +#define CRU_IHOST_PWRDWN_EN 0x1800e004 +#define CRU_IHOST_PWRDWN_EN_CLAMPON_NEON 0x00100000 +#define CRU_IHOST_PWRDWN_EN_PWRON_NEON 0x00200000 +#define CRU_IHOST_PWRDWN_EN_PWROK_NEON 0x00400000 + +#define CRU_IHOST_PWRDWN_STATUS 0x1800e008 +#define CRU_IHOST_PWRDWN_STATUS_PWRON_NEON 0x00200000 +#define CRU_IHOST_PWRDWN_STATUS_PWROK_NEON 0x00400000 + +#define CRU_STATUS_DELAY_US 1 +#define CRU_MAX_RETRY_COUNT 10 +#define CRU_RETRY_INTVL_US 1 + +static void neon_init(void) +{ + unsigned int i, val; + + /* put Neon into reset */ + val = read32((void *)CRU_CONTROL); + val &= ~CRU_CONTROL_NEON_RESET_N; + write32((void *)CRU_CONTROL, val); + + /* assert the power on register bit */ + val = read32((void *)CRU_IHOST_PWRDWN_EN); + val |= CRU_IHOST_PWRDWN_EN_PWRON_NEON; + write32((void *)CRU_IHOST_PWRDWN_EN, val); + + /* wait for power on */ + i = 0; + while (!(read32((void *)CRU_IHOST_PWRDWN_STATUS) & + CRU_IHOST_PWRDWN_STATUS_PWRON_NEON)) { + udelay(CRU_RETRY_INTVL_US); + if (i++ >= CRU_MAX_RETRY_COUNT) + die("Failed to ack NEON power on\n"); + } + + udelay(CRU_STATUS_DELAY_US); + + /* assert the power ok register bit */ + val = read32((void *)CRU_IHOST_PWRDWN_EN); + val |= CRU_IHOST_PWRDWN_EN_PWROK_NEON; + write32((void *)CRU_IHOST_PWRDWN_EN, val); + + /* wait for power ok */ + i = 0; + while (!(read32((void *)CRU_IHOST_PWRDWN_STATUS) & + CRU_IHOST_PWRDWN_STATUS_PWROK_NEON)) { + udelay(CRU_RETRY_INTVL_US); + if (i++ >= CRU_MAX_RETRY_COUNT) + die("Failed to ack NEON power ok\n"); + } + + udelay(CRU_STATUS_DELAY_US); + + /* clamp off for the NEON block */ + val = read32((void *)CRU_IHOST_PWRDWN_EN); + val &= ~CRU_IHOST_PWRDWN_EN_CLAMPON_NEON; + write32((void *)CRU_IHOST_PWRDWN_EN, val); + + udelay(CRU_STATUS_DELAY_US); + + /* bring NEON out of reset */ + val = read32((void *)CRU_CONTROL); + val |= CRU_CONTROL_NEON_RESET_N; + write32((void *)CRU_CONTROL, val); +} + +/***************************************************************************** + * PCIe + *****************************************************************************/ +#define CRMU_PCIE_CFG 0x0301d0a0 +#define PCIE0_LNK_PHY_IDDQ 0x00000004 +#define PCIE1_LNK_PHY_IDDQ 0x00000400 + +static void pcie_init(void) +{ + unsigned int val; + + /* + * Force all AFEs of both PCIe0 and PCIe1 to be powered down, including + * pad biasing + * + * This brings down the PCIe interfaces to the lowest possible power + * mode + */ + val = read32((void *)CRMU_PCIE_CFG); + val |= PCIE1_LNK_PHY_IDDQ | PCIE0_LNK_PHY_IDDQ; + write32((void *)CRMU_PCIE_CFG, val); +} + +/***************************************************************************** + * M0 + *****************************************************************************/ +#define CRMU_MCU_ACCESS_CONTROL 0x03024c00 +#define CRMU_MCU_ACCESS_MODE_SECURE 0x2 + +static void M0_init(void) +{ + /* Set M0 as a secure master */ + write32((void *)CRMU_MCU_ACCESS_CONTROL, CRMU_MCU_ACCESS_MODE_SECURE); +} + +/***************************************************************************** + * CCU + *****************************************************************************/ +#define IHOST_PROC_CLK_WR_ACCESS 0x19000000 +#define IHOST_PROC_CLK_POLICY_FREQ 0x19000008 +#define IHOST_PROC_CLK_POLICY_CTL 0x1900000c +#define IHOST_PROC_CLK_POLICY0_MASK 0x19000010 +#define IHOST_PROC_CLK_POLICY1_MASK 0x19000014 +#define IHOST_PROC_CLK_POLICY2_MASK 0x19000018 +#define IHOST_PROC_CLK_POLICY3_MASK 0x1900001c +#define IHOST_PROC_CLK_INTEN 0x19000020 +#define IHOST_PROC_CLK_INTSTAT 0x19000024 +#define IHOST_PROC_CLK_LVM_EN 0x19000034 +#define IHOST_PROC_CLK_LVM0_3 0x19000038 +#define IHOST_PROC_CLK_LVM4_7 0x1900003c +#define IHOST_PROC_CLK_VLT0_3 0x19000040 +#define IHOST_PROC_CLK_VLT4_7 0x19000044 +#define IHOST_PROC_CLK_BUS_QUIESC 0x19000100 +#define IHOST_PROC_CLK_CORE0_CLKGATE 0x19000200 +#define IHOST_PROC_CLK_CORE1_CLKGATE 0x19000204 +#define IHOST_PROC_CLK_ARM_SWITCH_CLKGATE 0x19000210 +#define IHOST_PROC_CLK_ARM_PERIPH_CLKGATE 0x19000300 +#define IHOST_PROC_CLK_APB0_CLKGATE 0x19000400 +#define IHOST_PROC_CLK_PL310_DIV 0x19000a00 +#define IHOST_PROC_CLK_PL310_TRIGGER 0x19000a04 +#define IHOST_PROC_CLK_ARM_SWITCH_DIV 0x19000a08 +#define IHOST_PROC_CLK_ARM_SWITCH_TRIGGER 0x19000a0c +#define IHOST_PROC_CLK_APB_DIV 0x19000a10 +#define IHOST_PROC_CLK_APB_DIV_TRIGGER 0x19000a14 +#define IHOST_PROC_CLK_PLLARMA 0x19000c00 +#define IHOST_PROC_CLK_PLLARMB 0x19000c04 +#define IHOST_PROC_CLK_PLLARMC 0x19000c08 +#define IHOST_PROC_CLK_PLLARMCTRL0 0x19000c0c +#define IHOST_PROC_CLK_PLLARMCTRL1 0x19000c10 +#define IHOST_PROC_CLK_PLLARMCTRL2 0x19000c14 +#define IHOST_PROC_CLK_PLLARMCTRL3 0x19000c18 +#define IHOST_PROC_CLK_PLLARMCTRL4 0x19000c1c +#define IHOST_PROC_CLK_PLLARMCTRL5 0x19000c20 +#define IHOST_PROC_CLK_PLLARM_OFFSET 0x19000c24 +#define IHOST_PROC_CLK_ARM_DIV 0x19000e00 +#define IHOST_PROC_CLK_ARM_SEG_TRG 0x19000e04 +#define IHOST_PROC_CLK_ARM_SEG_TRG_OVERRIDE 0x19000e08 +#define IHOST_PROC_CLK_PLL_DEBUG 0x19000e10 +#define IHOST_PROC_CLK_ACTIVITY_MON1 0x19000e20 +#define IHOST_PROC_CLK_ACTIVITY_MON2 0x19000e24 +#define IHOST_PROC_CLK_CLKGATE_DBG 0x19000e40 +#define IHOST_PROC_CLK_APB_CLKGATE_DBG1 0x19000e48 +#define IHOST_PROC_CLK_CLKMON 0x19000e64 +#define IHOST_PROC_CLK_POLICY_DBG 0x19000ec0 +#define IHOST_PROC_CLK_TGTMASK_DBG1 0x19000ec4 +#define IHOST_PROC_RST_WR_ACCESS 0x19000f00 +#define IHOST_PROC_RST_SOFT_RSTN 0x19000f04 +#define IHOST_PROC_RST_A9_CORE_SOFT_RSTN 0x19000f08 + +#define WR_ACCESS_PRIVATE_ACCESS_MODE 0x80000000 + +static uint32_t ccu_reg[] = { + IHOST_PROC_CLK_WR_ACCESS, + IHOST_PROC_CLK_POLICY_FREQ, + IHOST_PROC_CLK_POLICY_CTL, + IHOST_PROC_CLK_POLICY0_MASK, + IHOST_PROC_CLK_POLICY1_MASK, + IHOST_PROC_CLK_POLICY2_MASK, + IHOST_PROC_CLK_POLICY3_MASK, + IHOST_PROC_CLK_INTEN, + IHOST_PROC_CLK_INTSTAT, + IHOST_PROC_CLK_LVM_EN, + IHOST_PROC_CLK_LVM0_3, + IHOST_PROC_CLK_LVM4_7, + IHOST_PROC_CLK_VLT0_3, + IHOST_PROC_CLK_VLT4_7, + IHOST_PROC_CLK_BUS_QUIESC, + IHOST_PROC_CLK_CORE0_CLKGATE, + IHOST_PROC_CLK_CORE1_CLKGATE, + IHOST_PROC_CLK_ARM_SWITCH_CLKGATE, + IHOST_PROC_CLK_ARM_PERIPH_CLKGATE, + IHOST_PROC_CLK_APB0_CLKGATE, + IHOST_PROC_CLK_PL310_DIV, + IHOST_PROC_CLK_PL310_TRIGGER, + IHOST_PROC_CLK_ARM_SWITCH_DIV, + IHOST_PROC_CLK_ARM_SWITCH_TRIGGER, + IHOST_PROC_CLK_APB_DIV, + IHOST_PROC_CLK_APB_DIV_TRIGGER, + IHOST_PROC_CLK_PLLARMA, + IHOST_PROC_CLK_PLLARMB, + IHOST_PROC_CLK_PLLARMC, + IHOST_PROC_CLK_PLLARMCTRL0, + IHOST_PROC_CLK_PLLARMCTRL1, + IHOST_PROC_CLK_PLLARMCTRL2, + IHOST_PROC_CLK_PLLARMCTRL3, + IHOST_PROC_CLK_PLLARMCTRL4, + IHOST_PROC_CLK_PLLARMCTRL5, + IHOST_PROC_CLK_PLLARM_OFFSET, + IHOST_PROC_CLK_ARM_DIV, + IHOST_PROC_CLK_ARM_SEG_TRG, + IHOST_PROC_CLK_ARM_SEG_TRG_OVERRIDE, + IHOST_PROC_CLK_PLL_DEBUG, + IHOST_PROC_CLK_ACTIVITY_MON1, + IHOST_PROC_CLK_ACTIVITY_MON2, + IHOST_PROC_CLK_CLKGATE_DBG, + IHOST_PROC_CLK_APB_CLKGATE_DBG1, + IHOST_PROC_CLK_CLKMON, + IHOST_PROC_CLK_POLICY_DBG, + IHOST_PROC_CLK_TGTMASK_DBG1, + IHOST_PROC_RST_WR_ACCESS, + IHOST_PROC_RST_SOFT_RSTN, + IHOST_PROC_RST_A9_CORE_SOFT_RSTN +}; + +#define CCU_REG_TABLE_SIZE (sizeof(ccu_reg)/sizeof(ccu_reg[0])) + +/* Set priv_access_mode field to unrestricted (0) */ +static void ccu_init(void) +{ + uint32_t val; + uint32_t i; + for (i = 0; i < CCU_REG_TABLE_SIZE; i++) { + val = read32((void *)(ccu_reg[i])); + val &= ~WR_ACCESS_PRIVATE_ACCESS_MODE; + write32((void *)(ccu_reg[i]), val); + } +} + +/***************************************************************************** + * LCD + *****************************************************************************/ +#define ASIU_TOP_LCD_AXI_SB_CTRL 0x180aa02c +#define ASIU_TOP_LCD_AXI_SB_CTRL_LCD_ARPROT_MASK 0x03800000 +#define ASIU_TOP_LCD_AXI_SB_CTRL_LCD_HPROT_NON_SECURE 0x40000000 + +#define ASIU_TOP_CLK_GATING_CTRL 0x180aa024 +#define ASIU_TOP_CLK_GATING_CTRL_LCD_CLK_GATE_EN 0x00000010 +#define ASIU_TOP_CLK_GATING_CTRL_MIPI_DSI_CLK_GATE_EN 0x00000008 +#define ASIU_TOP_CLK_GATING_CTRL_GFX_CLK_GATE_EN 0x00000001 +#define ASIU_TOP_CLK_GATING_CTRL_AUD_CLK_GATE_EN 0x00000002 + +static void lcd_init(void) +{ + unsigned int val; + + val = read32((void *)ASIU_TOP_LCD_AXI_SB_CTRL); + /* set LCD_ARPROT and LCD_HPROT_NON_SECURE to 0 */ + val &= ~(ASIU_TOP_LCD_AXI_SB_CTRL_LCD_ARPROT_MASK | + ASIU_TOP_LCD_AXI_SB_CTRL_LCD_HPROT_NON_SECURE); + write32((void *)ASIU_TOP_LCD_AXI_SB_CTRL, val); + + /* make sure the LCD clock is ungated */ + val = read32((void *)ASIU_TOP_CLK_GATING_CTRL); + val |= ASIU_TOP_CLK_GATING_CTRL_LCD_CLK_GATE_EN; + write32((void *)ASIU_TOP_CLK_GATING_CTRL, val); +} + +/******************************************************************* + * Default priority settings in Cygnus + * + * Master Name Default Priority + * ==================== ================= + * ihost_m0 12 + * mhost0_m0 12 + * mhost1_m0 ` 12 + * pcie0_m0 9 + * pcie0_m1 9 + * cmicd_m0 7 + * amac_m0 7 + * amac_m1 7 + * ext_m0 (LCD) 5 + * ext_m1 (V3D) 5 + * sdio_m0 3 + * sdio_m1 3 + * usb2h_m0 3 + * usb2d_m0 3 + * dmu_m0 3 + * a9jtag_m0 0 + * + *****************************************************************************/ + +#define AXIIC_EXT_M0_READ_QOS 0x1a057100 +#define AXIIC_EXT_M0_READ_MASK 0x0000000f +#define AXIIC_EXT_M0_WRITE_QOS 0x1a057104 +#define AXIIC_EXT_M0_WRITE_MASK 0x0000000f + +static void lcd_qos_init(unsigned int qos) +{ + unsigned int val; + + val = read32((void *)AXIIC_EXT_M0_READ_QOS); + val &= ~AXIIC_EXT_M0_READ_MASK; + val |= (qos & AXIIC_EXT_M0_READ_MASK); + write32((void *)AXIIC_EXT_M0_READ_QOS, val); + + val = read32((void *)AXIIC_EXT_M0_WRITE_QOS); + val &= ~AXIIC_EXT_M0_WRITE_MASK; + val |= (qos & AXIIC_EXT_M0_WRITE_MASK); + write32((void *)AXIIC_EXT_M0_WRITE_QOS, val); +} + +/***************************************************************************** + * V3D + *****************************************************************************/ +#define ASIU_TOP_GFX_AXI_SB_CTRL 0x180aa034 +#define ASIU_TOP_GFX_AXI_SB_CTRL_GFX_ARPROT_MASK 0x03800000 +#define ASIU_TOP_GFX_AXI_SB_CTRL_GFX_AWPROT_MASK 0x00700000 + +static void v3d_init(void) +{ + unsigned int val; + + val = read32((void *)ASIU_TOP_GFX_AXI_SB_CTRL); + /* + * set both GFX_ARPROT and GFX_AWPROT to 0 + */ + val &= ~(ASIU_TOP_GFX_AXI_SB_CTRL_GFX_ARPROT_MASK | + ASIU_TOP_GFX_AXI_SB_CTRL_GFX_AWPROT_MASK); + write32((void *)ASIU_TOP_GFX_AXI_SB_CTRL, val); + + /* make sure the V3D clock is ungated */ + val = read32((void *)ASIU_TOP_CLK_GATING_CTRL); + val |= ASIU_TOP_CLK_GATING_CTRL_MIPI_DSI_CLK_GATE_EN | + ASIU_TOP_CLK_GATING_CTRL_GFX_CLK_GATE_EN; + write32((void *)ASIU_TOP_CLK_GATING_CTRL, val); +} + +/***************************************************************************** + * Audio + *****************************************************************************/ +#define CRMU_PLL_AON_CTRL 0x0301c020 +#define CRMU_PLL_AON_CTRL_ASIU_AUDIO_GENPLL_PWRON_PLL 0x00000800 +#define CRMU_PLL_AON_CTRL_ASIU_AUDIO_GENPLL_PWRON_BG 0x00000400 +#define CRMU_PLL_AON_CTRL_ASIU_AUDIO_GENPLL_PWRON_LDO 0x00000200 +#define CRMU_PLL_AON_CTRL_ASIU_AUDIO_GENPLL_ISO_IN 0x00000100 + +#define ASIU_TOP_AUD_AXI_SB_CTRL 0x180aa028 +#define ASIU_TOP_AUD_AXI_SB_CTRL_AUD_ARPROT_MASK 0x03800000 +#define ASIU_TOP_AUD_AXI_SB_CTRL_AUD_AWPROT_MASK 0x00700000 + +static void audio_init(void) +{ + unsigned int val; + + /* Ungate (enable) audio clock. */ + val = read32((void *)ASIU_TOP_CLK_GATING_CTRL); + val |= ASIU_TOP_CLK_GATING_CTRL_AUD_CLK_GATE_EN; + write32((void *)ASIU_TOP_CLK_GATING_CTRL, val); + + /* Power on audio GEN PLL, LDO, and BG. Input isolation = normal. */ + val = read32((void *)CRMU_PLL_AON_CTRL); + val |= CRMU_PLL_AON_CTRL_ASIU_AUDIO_GENPLL_PWRON_BG; + val |= CRMU_PLL_AON_CTRL_ASIU_AUDIO_GENPLL_PWRON_LDO; + val |= CRMU_PLL_AON_CTRL_ASIU_AUDIO_GENPLL_PWRON_PLL; + val &= ~CRMU_PLL_AON_CTRL_ASIU_AUDIO_GENPLL_ISO_IN; + write32((void *)CRMU_PLL_AON_CTRL, val); + + /* Clear AWPROT and ARPROT signals to audio block. */ + val = read32((void *)ASIU_TOP_AUD_AXI_SB_CTRL); + val &= ~(ASIU_TOP_AUD_AXI_SB_CTRL_AUD_AWPROT_MASK | + ASIU_TOP_AUD_AXI_SB_CTRL_AUD_ARPROT_MASK); + write32((void *)ASIU_TOP_AUD_AXI_SB_CTRL, val); +} + +/***************************************************************************** + * SDIO + *****************************************************************************/ +#define CRMU_SDIO_1P8_FAIL_CONTROL 0x0301c0a0 +#define UHS1_18V_VREG_FAIL 0x00000001 + +#define SDIO_IDM0_IO_CONTROL_DIRECT 0x18116408 +#define SDIO_IDM1_IO_CONTROL_DIRECT 0x18117408 +#define SDIO_CMD_COMFLICT_DISABLE 0x00400000 +#define SDIO_FEEDBACK_CLK_EN 0x00200000 +#define SDIO_CLK_ENABLE 0x00000001 + +#define CDRU_SDIO0_IO_CONTROL 0x0301d144 +#define CDRU_SDIO1_IO_CONTROL 0x0301d140 +#define INPUT_DISABLE 0x00000080 +#define SLEW_RATE_ENABLE 0x00000040 +#define PULL_UP_ENABLE 0x00000020 +#define PULL_DOWN_ENABLE 0x00000010 +#define HYSTERESIS_ENABLE 0x00000008 +#define SDIO_DEFAULT_DRIVE_STRENGTH 0x4 /* 8 mA */ + +#define SDIO_IDM0_IDM_RESET_CONTROL 0x18116800 +#define SDIO_IDM1_IDM_RESET_CONTROL 0x18117800 +#define SDIO_RESET_MASK 0x00000001 +#define SDIO_RESET_TIMEOUT 1000 + +#define CRMU_SDIO_CONTROL0 0x0301d088 +#define CRMU_SDIO_CONTROL1 0x0301d08c +#define CRMU_SDIO_CONTROL2 0x0301d090 +#define CRMU_SDIO_CONTROL3 0x0301d094 +#define CRMU_SDIO_CONTROL4 0x0301d098 +#define CRMU_SDIO_CONTROL5 0x0301d09c + +/* + * SDIO_CAPS_L + * + * Field Bit(s) + * =========================== + * DDR50 31 + * SDR104 30 + * SDR50 29 + * SLOTTYPE 28:27 + * ASYNCHIRQ 26 + * SYSBUS64 25 + * V18 24 + * V3 23 + * V33 22 + * SUPRSM 21 + * SDMA 20 + * HSPEED 19 + * ADMA2 18 + * EXTBUSMED 17 + * MAXBLK 16:15 + * BCLK 14:7 + * TOUT 6 + * TOUTFREQ 5:0 + */ +#define SDIO_CAPS_L 0xA17C0000 + +/* + * SDIO_CAPS_H + * + * Field Bit(s) + * =========================== + * reserved 31:20 + * SPIBLOCKMODE 19 + * SPIMODE_CAP 18 + * CLOCKMULT 17:10 + * RETUNE_MODE 9:8 + * USETUNE_SDR50 7 + * TMRCNT_RETUNE 6:3 + * DRVR_TYPED 2 + * DRVR_TYPEC 1 + * DRVR_TYPEA 0 + */ +#define SDIO_CAPS_H 0x000C0087 + +/* + * Preset value + * + * Field Bit(s) + * =========================== + * Driver Strength 12:11 + * Clock Generator 10 + * SDCLK Frequeency 9:0 + */ + +/* + * SDIO_PRESETVAL1 + * + * Field Bit(s) Description + * ============================================================ + * DDR50_PRESET 25:13 Preset Value for DDR50 + * DEFAULT_PRESET 12:0 Preset Value for Default Speed + */ +#define SDIO_PRESETVAL1 0x01004004 + +/* + * SDIO_PRESETVAL2 + * + * Field Bit(s) Description + * ============================================================ + * HIGH_SPEED_PRESET 25:13 Preset Value for High Speed + * INIT_PRESET 12:0 Preset Value for Initialization + */ +#define SDIO_PRESETVAL2 0x01004100 + +/* + * SDIO_PRESETVAL3 + * + * Field Bit(s) Description + * ============================================================ + * SDR104_PRESET 25:13 Preset Value for SDR104 + * SDR12_PRESET 12:0 Preset Value for SDR12 + */ +#define SDIO_PRESETVAL3 0x00000004 + +/* + * SDIO_PRESETVAL4 + * + * Field Bit(s) Description + * ============================================================ + * SDR25_PRESET 25:13 Preset Value for SDR25 + * SDR50_PRESET 12:0 Preset Value for SDR50 + */ +#define SDIO_PRESETVAL4 0x01005001 + +static void sdio_ctrl_init(unsigned int idx) +{ + unsigned int sdio_idm_io_control_direct_reg; + unsigned int cdru_sdio_io_control_reg; + unsigned int sdio_idm_reset_control_reg; + unsigned int val, timeout; + + switch (idx) { + case 0: + sdio_idm_io_control_direct_reg = SDIO_IDM0_IO_CONTROL_DIRECT; + cdru_sdio_io_control_reg = CDRU_SDIO0_IO_CONTROL; + sdio_idm_reset_control_reg = SDIO_IDM0_IDM_RESET_CONTROL; + break; + case 1: + sdio_idm_io_control_direct_reg = SDIO_IDM1_IO_CONTROL_DIRECT; + cdru_sdio_io_control_reg = CDRU_SDIO1_IO_CONTROL; + sdio_idm_reset_control_reg = SDIO_IDM1_IDM_RESET_CONTROL; + break; + default: + return; + } + + /* + * Disable the cmd conflict error interrupt and enable feedback clock + */ + val = read32((void *)sdio_idm_io_control_direct_reg); + val |= SDIO_CMD_COMFLICT_DISABLE | SDIO_FEEDBACK_CLK_EN | + SDIO_CLK_ENABLE; + write32((void *)sdio_idm_io_control_direct_reg, val); + + /* + * Set drive strength, enable hysteresis and slew rate control + */ + val = SDIO_DEFAULT_DRIVE_STRENGTH | + HYSTERESIS_ENABLE | SLEW_RATE_ENABLE; + write32((void *)cdru_sdio_io_control_reg, val); + + /* Reset SDIO controller */ + val = read32((void *)sdio_idm_reset_control_reg); + val |= SDIO_RESET_MASK; + write32((void *)sdio_idm_reset_control_reg, SDIO_RESET_MASK); + udelay(10); + val &= ~SDIO_RESET_MASK; + write32((void *)sdio_idm_reset_control_reg, val); + + timeout = 0; + while (read32((void *)sdio_idm_reset_control_reg) & SDIO_RESET_MASK) { + udelay(1); + if (timeout++ > SDIO_RESET_TIMEOUT) + die("Failed to bring SDIO out of reset\n"); + } +} + +static void sdio_init(void) +{ + unsigned int val; + + /* + * Configure SDIO host controller capabilities + * (common setting for all SDIO controllers) + */ + write32((void *)CRMU_SDIO_CONTROL0, SDIO_CAPS_H); + write32((void *)CRMU_SDIO_CONTROL1, SDIO_CAPS_L); + /* + * Configure SDIO host controller preset values + * (common setting for all SDIO controllers) + */ + write32((void *)CRMU_SDIO_CONTROL2, SDIO_PRESETVAL1); + write32((void *)CRMU_SDIO_CONTROL3, SDIO_PRESETVAL2); + write32((void *)CRMU_SDIO_CONTROL4, SDIO_PRESETVAL3); + write32((void *)CRMU_SDIO_CONTROL5, SDIO_PRESETVAL4); + + /* + * The sdhci driver attempts to change the SDIO IO voltage for UHS-I + * cards by setting the EN1P8V in control2 register then checks the + * outcome by reading it back. + * Cygnus does not have an internal regulator for the SDIO IO voltage + * but can be configured to indicate success (leave EN1P8V set) + * or failure (clear EN1P8V). + * + * Clear CRMU_SDIO_UHS1_18V_VREG_FAIL in CRMU_SDIO_1P8_FAIL_CONTROL + * register to indicate success. + * (common setting for all SDIO controllers) + */ + val = read32((void *)CRMU_SDIO_1P8_FAIL_CONTROL); + val &= ~UHS1_18V_VREG_FAIL; + write32((void *)CRMU_SDIO_1P8_FAIL_CONTROL, val); + + /* + * Initialize each SDIO controller + */ + sdio_ctrl_init(0); + sdio_ctrl_init(1); +} + +void hw_init(void) +{ + tz_set_masters_security(IPROC_M_PCIE | IPROC_M_EXT | IPROC_M_SDIO | + IPROC_M_AMAC | IPROC_M_USB | IPROC_M_CMICD, + TZ_STATE_SECURE); + printk(BIOS_INFO, "trustzone initialized\n"); + dmac_init(); + printk(BIOS_INFO, "PL022 DMAC initialized\n"); + lcd_init(); + lcd_qos_init(15); + printk(BIOS_INFO, "LCD initialized\n"); + v3d_init(); + printk(BIOS_INFO, "V3D initialized\n"); + audio_init(); + printk(BIOS_INFO, "audio initialized\n"); + neon_init(); + printk(BIOS_INFO, "neon initialized\n"); + pcie_init(); + printk(BIOS_INFO, "PCIe initialized\n"); + M0_init(); + printk(BIOS_INFO, "M0 initialized\n"); + ccu_init(); + printk(BIOS_INFO, "CCU initialized\n"); + sdio_init(); + printk(BIOS_INFO, "SDIO initialized\n"); +} diff --git a/src/soc/broadcom/cygnus/include/soc/hw_init.h b/src/soc/broadcom/cygnus/include/soc/hw_init.h new file mode 100644 index 0000000000..a02daa0b00 --- /dev/null +++ b/src/soc/broadcom/cygnus/include/soc/hw_init.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __SOC_BROADCOM_CYGNUS_HW_INIT_H__ +#define __SOC_BROADCOM_CYGNUS_HW_INIT_H__ + +void hw_init(void); + +#endif |