diff options
Diffstat (limited to 'src/soc')
| -rw-r--r-- | src/soc/intel/apollolake/chip.c | 7 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h | 148 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h | 1241 |
3 files changed, 1113 insertions, 283 deletions
diff --git a/src/soc/intel/apollolake/chip.c b/src/soc/intel/apollolake/chip.c index 2374a888c3..e9eb1ac140 100644 --- a/src/soc/intel/apollolake/chip.c +++ b/src/soc/intel/apollolake/chip.c @@ -19,6 +19,7 @@ #include <fsp/api.h> #include <fsp/util.h> #include <memrange.h> +#include <soc/iomap.h> #include <soc/cpu.h> #include <soc/pci_devs.h> @@ -88,6 +89,12 @@ void platform_fsp_silicon_init_params_cb(struct FSPS_UPD *silupd) silconfig->PcieRpClkReqNumber[3] = cfg->pcie_rp3_clkreq_pin; silconfig->PcieRpClkReqNumber[4] = cfg->pcie_rp4_clkreq_pin; silconfig->PcieRpClkReqNumber[5] = cfg->pcie_rp5_clkreq_pin; + + /* Our defaults may not match FSP defaults, so set them explicitly */ + silconfig->AcpiBase = ACPI_PMIO_BASE; + /* First 4k in BAR0 is used for IPC, real registers start at 4k offset */ + silconfig->PmcBase = PMC_BAR0 + 0x1000; + silconfig->P2sbBase = P2SB_BAR; } struct chip_operations soc_intel_apollolake_ops = { diff --git a/src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h b/src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h index e55b42b72d..b1a16072e5 100644 --- a/src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h +++ b/src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h @@ -119,349 +119,349 @@ struct FSP_M_ARCH_UPD { /** Offset 0x0038 **/ - uint8_t ReservedFspmArchUpd[8]; + uint8_t Reserved1[8]; } __attribute__((packed)); /** Fsp M Configuration **/ struct FSP_M_CONFIG { -/** Offset 0x0040 - Debug Serial Port Base - Debug serial port base address. This option will be used only when the 'Serial Port Debug Device' option is set to 'External Device'. +/** Offset 0x0040 - Debug Serial Port Base address + Debug serial port base address. This option will be used only when the 'Serial Port Debug Device' option is set to 'External Device'. 0x00000000(Default). **/ uint32_t SerialDebugPortAddress; /** Offset 0x0044 - Debug Serial Port Type - 16550 compatible debug serial port resource type. NONE means no serial port support. + 16550 compatible debug serial port resource type. NONE means no serial port support. 0x02:MMIO(Default). 0:NONE, 1:I/O, 2:MMIO **/ uint8_t SerialDebugPortType; /** Offset 0x0045 - Serial Port Debug Device - Select active serial port device for debug. For SOC UART devices,'Debug Serial Port Base' options will be ignored. + Select active serial port device for debug. For SOC UART devices,'Debug Serial Port Base' options will be ignored. 0x02:SOC UART2(Default). 0:SOC UART0, 1:SOC UART1, 2:SOC UART2, 3:External Device **/ uint8_t SerialDebugPortDevice; /** Offset 0x0046 - Debug Serial Port Stride Size - Debug serial port register map stride size in bytes. + Debug serial port register map stride size in bytes. 0x00:1, 0x02:4(Default). 0:1, 2:4 **/ uint8_t SerialDebugPortStrideSize; /** Offset 0x0047 - Memory Fast Boot - Enable/Disable MRC fast boot support. + Enable/Disable MRC fast boot support. 0x00:Disable, 0x01:Enable(Default). $EN_DIS **/ uint8_t MrcFastBoot; /** Offset 0x0048 - Integrated Graphics Device - Enable : Enable Integrated Graphics Device (IGD) when selected as the Primary Video Adaptor. Disable: Always disable IGD. + Enable : Enable Integrated Graphics Device (IGD) when selected as the Primary Video Adaptor. Disable: Always disable IGD. 0x00:Disable, 0x01:Enable(Default). $EN_DIS **/ uint8_t Igd; /** Offset 0x0049 - DVMT Pre-Allocated - Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device. + Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device. 0x02:64 MB(Default). 0x02:64 MB, 0x03:96 MB, 0x04:128 MB, 0x05:160 MB, 0x06:192 MB, 0x07:224 MB, 0x08:256 MB, 0x09:288 MB, 0x0A:320 MB, 0x0B:352 MB, 0x0C:384 MB, 0x0D:416 MB, 0x0E:448 MB, 0x0F:480 MB, 0x10:512 MB **/ uint8_t IgdDvmt50PreAlloc; /** Offset 0x004A - Aperture Size - Select the Aperture Size used by the Internal Graphics Device. + Select the Aperture Size used by the Internal Graphics Device. 0x1:128 MB(Default), 0x2:256 MB, 0x3:512 MB. 0x1:128 MB, 0x2:256 MB, 0x3:512 MB **/ uint8_t IgdApertureSize; /** Offset 0x004B - GTT Size - Select the GTT Size used by the Internal Graphics Device. + Select the GTT Size used by the Internal Graphics Device. 0x1:2 MB, 0x2:4 MB, 0x3:8 MB(Default). 0x1:2 MB, 0x2:4 MB, 0x3:8 MB **/ uint8_t GttSize; /** Offset 0x004C - Primary Display - Select which of IGD/PCI Graphics device should be Primary Display. + Select which of IGD/PCI Graphics device should be Primary Display. 0x0:AUTO(Default), 0x2:IGD, 0x3:PCI 0x0:AUTO, 0x2:IGD, 0x3:PCI **/ uint8_t PrimaryVideoAdaptor; /** Offset 0x004D - Package - NOTE: First option is CoPOP if LPDDR3/LPDDR4 is being used. It is SODIMM if DDR3L is being used. + NOTE: First option is CoPOP if LPDDR3/LPDDR4 is being used. It is SODIMM if DDR3L is being used. 0x00(Default). 0x0:CoPop, 0x1:BGA, 0x2:LP3 ACRD **/ uint8_t Package; /** Offset 0x004E - Profile - Profile list + Profile list. 0x19(Default). 0x1:WIO2_800_7_8_8, 0x2:WIO2_1066_9_10_10, 0x3:LPDDR3_1066_8_10_10, 0x4:LPDDR3_1333_10_12_12, 0x5:LPDDR3_1600_12_15_15, 0x6:LPDDR3_1866_14_17_17, 0x7:LPDDR3_2133_16_20_20, 0x8:LPDDR4_1066_10_10_10, 0x9:LPDDR4_1600_14_15_15, 0xA:LPDDR4_2133_20_20_20, 0xB:LPDDR4_2400_24_22_22, 0xC:LPDDR4_2666_24_24_24, 0xD:LPDDR4_2933_28_27_27, 0xE:LPDDR4_3200_28_29_29, 0xF:DDR3_1066_6_6_6, 0x10:DDR3_1066_7_7_7, 0x11:DDR3_1066_8_8_8, 0x12:DDR3_1333_7_7_7, 0x13:DDR3_1333_8_8_8, 0x14:DDR3_1333_9_9_9, 0x15:DDR3_1333_10_10_10, 0x16:DDR3_1600_8_8_8, 0x17:DDR3_1600_9_9_9, 0x18:DDR3_1600_10_10_10, 0x19:DDR3_1600_11_11_11, 0x1A:DDR3_1866_10_10_10, 0x1B:DDR3_1866_11_11_11, 0x1C:DDR3_1866_12_12_12, 0x1D:DDR3_1866_13_13_13, 0x1E:DDR3_2133_11_11_11, 0x1F:DDR3_2133_12_12_12, 0x20:DDR3_2133_13_13_13, 0x21:DDR3_2133_14_14_14, 0x22:DDR4_1333_10_10_10, 0x23:DDR4_1600_10_10_10, 0x24:DDR4_1600_11_11_11, 0x25:DDR4_1600_12_12_12, 0x26:DDR4_1866_12_12_12, 0x27:DDR4_1866_13_13_13, 0x28:DDR4_1866_14_14_14, 0x29:DDR4_2133_14_14_14, 0x2A:DDR4_2133_15_15_15, 0x2B:DDR4_2133_16_16_16, 0x2C:DDR4_2400_15_15_15, 0x2D:DDR4_2400_16_16_16, 0x2E:DDR4_2400_17_17_17, 0x2F:DDR4_2400_18_18_18 **/ uint8_t Profile; /** Offset 0x004F - MemoryDown - Memory Down. + Memory Down. 0x0(Default). 0x0:No, 0x1:Yes, 0x2:1MD+SODIMM (for DDR3L only) ACRD, 0x3:1x32 LPDDR4 **/ uint8_t MemoryDown; /** Offset 0x0050 - DDR3LPageSize - NOTE: Only for memory down or downgrade DDR3L frequency. + NOTE: Only for memory down or downgrade DDR3L frequency. 0x01:1KB, 0x02:2KB, 0x00(Default). 0x1:1KB, 0x2:2KB **/ uint8_t DDR3LPageSize; /** Offset 0x0051 - DDR3LASR - NOTE: Only for memory down. + NOTE: Only for memory down. 0x00:Not Supported(Default), 0x01:Supported. 0x0:Not Supported, 0x1:Supported **/ uint8_t DDR3LASR; /** Offset 0x0052 - ScramblerSupport - Scrambler Support. + Scrambler Support. 0x00:Not Supported, 0x01:Supported(Default). $EN_DIS **/ uint8_t ScramblerSupport; /** Offset 0x0053 - ChannelHashMask - Channel Hash Mask. + Channel Hash Mask. 0x00(Default). **/ uint16_t ChannelHashMask; /** Offset 0x0055 - SliceHashMask - Slice Hash Mask. + Slice Hash Mask. 0x00(Default). **/ uint16_t SliceHashMask; /** Offset 0x0057 - InterleavedMode - Interleaved Mode. + Interleaved Mode. 0x00:Disable(Default), 0x01:Enable. $EN_DIS **/ uint8_t InterleavedMode; /** Offset 0x0058 - ChannelsSlicesEnable - Channels Slices Enable. + Channels Slices Enable. 0x00:Disable(Default), 0x01:Enable. $EN_DIS **/ uint8_t ChannelsSlicesEnable; /** Offset 0x0059 - MinRefRate2xEnable - Provided as a means to defend against Row-Hammer attacks. + Provided as a means to defend against Row-Hammer attacks. 0x00:Disable(Default), 0x01:Enable. $EN_DIS **/ uint8_t MinRefRate2xEnable; /** Offset 0x005A - DualRankSupportEnable - Dual Rank Support Enable. + Dual Rank Support Enable. 0x00:Disable, 0x01:Enable(Default). $EN_DIS **/ uint8_t DualRankSupportEnable; /** Offset 0x005B - RmtMode - Rank Margin Tool Mode. + Rank Margin Tool Mode. 0x00(Default). $EN_DIS **/ uint8_t RmtMode; /** Offset 0x005C - MemorySizeLimit - Memory Size Limit: This value is used to restrict the total amount of memory and the calculations based on it. Value is in MB\nExample encodings are: 0x400 = 1GB, 0x800 = 2GB, 0x1000 = 4GB, 0x2000 8GB. + Memory Size Limit: This value is used to restrict the total amount of memory and the calculations based on it. Value is in MB. Example encodings are: 0x400 = 1GB, 0x800 = 2GB, 0x1000 = 4GB, 0x2000 8GB. 0x0000(Default) **/ uint16_t MemorySizeLimit; /** Offset 0x005E - LowMemoryMaxValue - Low Memory Max Value: This value is used to restrict the amount of memory below 4GB and the calculations based on it. Value is in MB\nExample encodings are: 0x400 = 1GB, 0x800 = 2GB, 0x1000 = 4GB, 0x2000 8GB. + Low Memory Max Value: This value is used to restrict the amount of memory below 4GB and the calculations based on it. Value is in MB.Example encodings are: 0x400 = 1GB, 0x800 = 2GB, 0x1000 = 4GB, 0x2000 8GB. 0x0000(Default). **/ uint16_t LowMemoryMaxValue; /** Offset 0x0060 - DisableFastBoot - 00: Disabled; Used saved training data (if valid)\n01: Enabled; Full re-train of memory. + 00:Disabled Used saved training data (if valid)(Default), 01:Enabled; Full re-train of memory. $EN_DIS **/ uint8_t DisableFastBoot; /** Offset 0x0061 - HighMemoryMaxValue - High Memory Max Value: This value is used to restrict the amount of memory above 4GB and the calculations based on it. Value is in MB\nExample encodings are: 0x400 = 1GB, 0x800 = 2GB, 0x1000 = 4GB, 0x2000 8GB. + High Memory Max Value: This value is used to restrict the amount of memory above 4GB and the calculations based on it. Value is in MB. Example encodings are: 0x0400:1GB, 0x0800:2GB, 0x1000:4GB, 0x2000:8GB. 0x00(Default). **/ uint16_t HighMemoryMaxValue; /** Offset 0x0063 - DIMM0SPDAddress - DIMM0 SPD Address (NOTE: Only for DDR3L only. Please put 0 for MemoryDown. + DIMM0 SPD Address (NOTE: Only for DDR3L only. Please put 0 for MemoryDown. 0xA0(Default). **/ uint8_t DIMM0SPDAddress; /** Offset 0x0064 - DIMM1SPDAddress - DIMM1 SPD Address (NOTE: Only for DDR3L only. Please put 0 for MemoryDown. + DIMM1 SPD Address (NOTE: Only for DDR3L only. Please put 0 for MemoryDown. 0xA4(Default). **/ uint8_t DIMM1SPDAddress; /** Offset 0x0065 - Ch0_RankEnable - NOTE: Only for memory down\n[0] Enable Rank 0: Must be set to 1 to enable use of this rank.\n[1] Enable Rank 1: Must be set to 1 to enable use of this rank. + NOTE: Only for memory down. Set to 1 to enable Ch0 rank. 0x00(Default). **/ uint8_t Ch0_RankEnable; /** Offset 0x0066 - Ch0_DeviceWidth - NOTE: Only for memory down\nDRAM Device Data Width populated on Ranks 0 and 1. + NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. 0x00(Default). 0b0000:x8, 0b0001:x16, 0b0010:x32, 0b0011:x64 **/ uint8_t Ch0_DeviceWidth; /** Offset 0x0067 - Ch0_DramDensity - NOTE: Only for memory down\nDRAM Device Density populated on Ranks 0 and 1. + NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00(Default). 0b0000:4Gb, 0b0001:6Gb, 0b0010:8Gb, 0b0011:12Gb, 0b0100:16Gb **/ uint8_t Ch0_DramDensity; /** Offset 0x0068 - Ch0_Option - [0] Rank Select Interleaving Enable. See Address Mapping section for full description.\n0 - Rank Select Interleaving disabled\n1 - Rank Select Interleaving enabled\n[1] Bank Address Hashing Enable. See Address Mapping section for full description.\n0 - Bank Address Hashing disabled\n1 - Bank Address Hashing enabled\n[3:2] Reserved\n[5:4] This register specifies the address mapping to be used:\n00 - 1KB (A)\n01 - 2KB (B). + Rank Select Interleaving Enable. See Address Mapping section for full description. 0:Rank Select Interleaving disabled, 1:Rank Select Interleaving enabled. [1] Bank Address Hashing Enable. See Address Mapping section for full description. 0:Bank Address Hashing disabled, 1:Bank Address Hashing enabled. [3:2] Reserved. [5:4] This register specifies the address mapping to be used: 00:1KB (A), 01:2KB (B). 0x03(Default). **/ uint8_t Ch0_Option; /** Offset 0x0069 - Ch0_OdtConfig - [0] ODT configuration control.\n0 - WEAK_ODT_CONFIG\n1 - STRONG_ODT_CONFIG\n. + ODT configuration control. 0:WEAK_ODT_CONFIG(Default), 1:STRONG_ODT_CONFIG. **/ uint8_t Ch0_OdtConfig; /** Offset 0x006A - Ch0_TristateClk1 - [0] Parameter used to determine whether to tristate CLK1.\n Boolean value. + Parameter used to determine whether to tristate CLK1. 0x00(Default). **/ uint8_t Ch0_TristateClk1; /** Offset 0x006B - Ch0_Mode2N - [0] 2N Mode.\n Boolean value. + 2N Mode. 0x00(Default). **/ uint8_t Ch0_Mode2N; /** Offset 0x006C - Ch0_OdtLevels - [0] Rank Select Interleaving Enable. See Address Mapping section for full description.\n0 - Rank Select Interleaving disabled\n1 - Rank Select Interleaving enabled\n[1] Bank Address Hashing Enable. See Address Mapping section for full description.\n0 - Bank Address Hashing disabled\n1 - Bank Address Hashing enabled\n[3:2] Reserved\n[5:4] This register specifies the address mapping to be used:\n00 - 1KB (A)\n01 - 2KB (B). + Rank Select Interleaving Enable. See Address Mapping section for full description. 0:Rank Select Interleaving disabled(Default), 1:Rank Select Interleaving enabled. [1] Bank Address Hashing Enable. See Address Mapping section for full description. 0:Bank Address Hashing disabled, 1:Bank Address Hashing enabled. [3:2] Reserved. [5:4] This register specifies the address mapping to be used:00:1KB (A), 01:2KB (B). **/ uint8_t Ch0_OdtLevels; /** Offset 0x006D - Ch1_RankEnable - NOTE: Only for memory down\n[0] Enable Rank 0: Must be set to 1 to enable use of this rank.\n[1] Enable Rank 1: Must be set to 1 to enable use of this rank. + NOTE: Only for memory down. Set to 1 to enable Ch1 rank. **/ uint8_t Ch1_RankEnable; /** Offset 0x006E - Ch1_DeviceWidth - NOTE: Only for memory down\nDRAM Device Data Width populated on Ranks 0 and 1. + NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. 0x00(Default). 0b0000:x8, 0b0001:x16, 0b0010:x32, 0b0011:x64 **/ uint8_t Ch1_DeviceWidth; /** Offset 0x006F - Ch1_DramDensity - NOTE: Only for memory down\nDRAM Device Density populated on Ranks 0 and 1. + NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00:4Gb(Default). 0b0000:4Gb, 0b0001:6Gb, 0b0010:8Gb, 0b0011:12Gb, 0b0100:16Gb **/ uint8_t Ch1_DramDensity; /** Offset 0x0070 - Ch1_Option - [0] Rank Select Interleaving Enable. See Address Mapping section for full description.\n0 - Rank Select Interleaving disabled\n1 - Rank Select Interleaving enabled\n[1] Bank Address Hashing Enable. See Address Mapping section for full description.\n0 - Bank Address Hashing disabled\n1 - Bank Address Hashing enabled\n[3:2] Reserved\n[5:4] This register specifies the address mapping to be used:\n00 - 1KB (A)\n01 - 2KB (B). + Rank Select Interleaving Enable. See Address Mapping section for full description. 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1] Bank Address Hashing Enable. See Address Mapping section for full description. 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved. [5:4] This register specifies the address mapping to be used: 00:1KB (A), 01:2KB (B), 0x03(Default). **/ uint8_t Ch1_Option; /** Offset 0x0071 - Ch1_OdtConfig - [0] ODT configuration control.\n0 - WEAK_ODT_CONFIG\n1 - STRONG_ODT_CONFIG\n. + ODT configuration control. 0:WEAK_ODT_CONFIG(Default), 1:STRONG_ODT_CONFIG. **/ uint8_t Ch1_OdtConfig; /** Offset 0x0072 - Ch1_TristateClk1 - [0] Parameter used to determine whether to tristate CLK1.\nBoolean value. + Parameter used to determine whether to tristate CLK1. 0x00(Default). **/ uint8_t Ch1_TristateClk1; /** Offset 0x0073 - Ch1_Mode2N - [0] 2N Mode.\nBoolean value. + 2N Mode. 0x00(Default). **/ uint8_t Ch1_Mode2N; /** Offset 0x0074 - Ch1_OdtLevels - [0] Parameter used to determine if ODT will be held high or low.\n0 - Use MRC default\n1 - ODT_AB_HIGH_HIGH\n3 - ODT_AB_HIGH_LOW. + Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default), 1:ODT_AB_HIGH_HIGH. 3:ODT_AB_HIGH_LOW. **/ uint8_t Ch1_OdtLevels; /** Offset 0x0075 - Ch2_RankEnable - NOTE: Only for memory down\n[0] Enable Rank 0: Must be set to 1 to enable use of this rank.\n[1] Enable Rank 1: Must be set to 1 to enable use of this rank. + NOTE: Only for memory down. Set to 1 to enable Ch2 rank. **/ uint8_t Ch2_RankEnable; /** Offset 0x0076 - Ch2_DeviceWidth - NOTE: Only for memory down\nDRAM Device Data Width populated on Ranks 0 and 1. + NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. 0b0000:x8, 0b0001:x16, 0b0010:x32, 0b0011:x64 **/ uint8_t Ch2_DeviceWidth; /** Offset 0x0077 - Ch2_DramDensity - NOTE: Only for memory down\nDRAM Device Density populated on Ranks 0 and 1. + NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00(Default). 0b0000:4Gb, 0b0001:6Gb, 0b0010:8Gb, 0b0011:12Gb, 0b0100:16Gb **/ uint8_t Ch2_DramDensity; /** Offset 0x0078 - Ch2_Option - [0] Rank Select Interleaving Enable. See Address Mapping section for full description.\n0 - Rank Select Interleaving disabled\n1 - Rank Select Interleaving enabled\n[1] Bank Address Hashing Enable. See Address Mapping section for full description.\n0 - Bank Address Hashing disabled\n1 - Bank Address Hashing enabled\n[3:2] Reserved\n[5:4] This register specifies the address mapping to be used:\n00 - 1KB (A)\n01 - 2KB (B). + Rank Select Interleaving Enable. See Address Mapping section for full description.. 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1] Bank Address Hashing Enable. See Address Mapping section for full description.. 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved. [5:4] This register specifies the address mapping to be used:. 00:1KB (A)(Default). 01:2KB (B). **/ uint8_t Ch2_Option; /** Offset 0x0079 - Ch2_OdtConfig - [0] ODT configuration control.\n0 - WEAK_ODT_CONFIG\n1 - STRONG_ODT_CONFIG\n. + ODT configuration control. 0:WEAK_ODT_CONFIG(Default), 1:STRONG_ODT_CONFIG. **/ uint8_t Ch2_OdtConfig; /** Offset 0x007A - Ch2_TristateClk1 - [0] Parameter used to determine whether to tristate CLK1.\nBoolean value. + Parameter used to determine whether to tristate CLK1. 0x00(Default). **/ uint8_t Ch2_TristateClk1; /** Offset 0x007B - Ch2_Mode2N - [0] 2N Mode.\nBoolean value. + 2N Mode. 0x00(Default). **/ uint8_t Ch2_Mode2N; /** Offset 0x007C - Ch2_OdtLevels - [0] Parameter used to determine if ODT will be held high or low.\n0 - Use MRC default\n1 - ODT_AB_HIGH_HIGH\n3 - ODT_AB_HIGH_LOW. + Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default), 1:ODT_AB_HIGH_HIGH, 3:ODT_AB_HIGH_LOW. **/ uint8_t Ch2_OdtLevels; /** Offset 0x007D - Ch3_RankEnable - NOTE: Only for memory down\n[0] Enable Rank 0: Must be set to 1 to enable use of this rank.\n[1] Enable Rank 1: Must be set to 1 to enable use of this rank. + NOTE: Only for memory down. Set to 1 to enable Ch3 rank. 0x00(Default). **/ uint8_t Ch3_RankEnable; /** Offset 0x007E - Ch3_DeviceWidth - NOTE: Only for memory down\nDRAM Device Data Width populated on Ranks 0 and 1. + NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. 0x00:x8(Default), 0x01:x16, 0x02:x32, 0x03:x64. 0b0000:x8, 0b0001:x16, 0b0010:x32, 0b0011:x64 **/ uint8_t Ch3_DeviceWidth; /** Offset 0x007F - Ch3_DramDensity - NOTE: Only for memory down\nDRAM Device Density populated on Ranks 0 and 1. + NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00:4Gb(Default), 0x01:6Gb, 0x02:8Gb, 0x03:12Gb, 0x04:16Gb. 0b0000:4Gb, 0b0001:6Gb, 0b0010:8Gb, 0b0011:12Gb, 0b0100:16Gb **/ uint8_t Ch3_DramDensity; /** Offset 0x0080 - Ch3_Option - [0] Rank Select Interleaving Enable. See Address Mapping section for full description.\n0 - Rank Select Interleaving disabled\n1 - Rank Select Interleaving enabled\n[1] Bank Address Hashing Enable. See Address Mapping section for full description.\n0 - Bank Address Hashing disabled\n1 - Bank Address Hashing enabled\n[3:2] Reserved\n[5:4] This register specifies the address mapping to be used:\n00 - 1KB (A)\n01 - 2KB (B). + Rank Select Interleaving Enable. See Address Mapping section for full description.. 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1] Bank Address Hashing Enable. See Address Mapping section for full description.. 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved. [5:4] This register specifies the address mapping to be used:. 00 - 1KB (A). 01 - 2KB (B). **/ uint8_t Ch3_Option; /** Offset 0x0081 - Ch3_OdtConfig - [0] ODT configuration control.\n0 - WEAK_ODT_CONFIG\n1 - STRONG_ODT_CONFIG\n. + ODT configuration control.. 0:WEAK_ODT_CONFIG(Default). 1:STRONG_ODT_CONFIG. **/ uint8_t Ch3_OdtConfig; /** Offset 0x0082 - Ch3_TristateClk1 - [0] Parameter used to determine whether to tristate CLK1.\nBoolean value. + Parameter used to determine whether to tristate CLK1. 0x00(Default). **/ uint8_t Ch3_TristateClk1; /** Offset 0x0083 - Ch3_Mode2N - [0] 2N Mode.\nBoolean value. + 2N Mode. 0x00(Default). **/ uint8_t Ch3_Mode2N; /** Offset 0x0084 - Ch3_OdtLevels - [0] Parameter used to determine if ODT will be held high or low.\n0 - Use MRC default\n1 - ODT_AB_HIGH_HIGH\n3 - ODT_AB_HIGH_LOW. + Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default), 1:ODT_AB_HIGH_HIGH, 3:ODT_AB_HIGH_LOW. **/ uint8_t Ch3_OdtLevels; /** Offset 0x0085 - RmtCheckRun - [0] Parameter used to determine if ODT will be held high or low.\n0 - Use MRC default\n1 - ODT_AB_HIGH_HIGH\n3 - ODT_AB_HIGH_LOW. + RmtCheckRun: 0x00(Default). **/ uint8_t RmtCheckRun; @@ -486,28 +486,34 @@ struct FSP_M_CONFIG { uint8_t Ch3_Bit_swizzling[32]; /** Offset 0x0106 - RmtMarginCheckScaleHighThreshold - Channel 3 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. + RmtMarginCheckScaleHighThreshold. 0x0000(Default). **/ uint16_t RmtMarginCheckScaleHighThreshold; /** Offset 0x0108 - MsgLevelMask - Channel 3 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. + MsgLevelMask. 0x00000000(Default). **/ uint32_t MsgLevelMask; /** Offset 0x010C - FIT Table Pointer - FIT table pointer. + FIT table pointer. 0x00000000(Default). **/ uint32_t FitTablePtr; /** Offset 0x0110 - GPIO Table Pointer - GPIO table pointer to a BL_GPIO_PAD_INIT structure. + GPIO table pointer to a BL_GPIO_PAD_INIT structure. 0x00000000(Default). **/ struct BL_GPIO_PAD_INIT* GpioPadInitTablePtr; -/** Offset 0x0114 +/** Offset 0x0114 - Enhance the port 8xh decoding + Enable/Disable Enhance the port 8xh decoding. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t EnhancePort8xhDecoding; + +/** Offset 0x0115 **/ - uint8_t ReservedFspmUpd[60]; + uint8_t ReservedFspmUpd[59]; } __attribute__((packed)); /** Fsp M Test Configuration @@ -538,6 +544,8 @@ struct FSP_M_RESTRICTED_CONFIG { #define FSPM_UPD_SIGNATURE 0x4450555F4D505346 /* 'FSPM_UPD' */ +/** Fsp M UPD Configuration +**/ struct FSPM_UPD { /** Offset 0x0000 diff --git a/src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h b/src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h index f2f867b64d..2ada27f806 100644 --- a/src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h +++ b/src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h @@ -41,76 +41,76 @@ are permitted provided that the following conditions are met: struct FSP_S_CONFIG { /** Offset 0x0020 - ActiveProcessorCores - Number of active cores. + Number of active cores. 0:Disable(Default), 1:Enable. **/ uint8_t ActiveProcessorCores; /** Offset 0x0021 - Disable Core1 - Disable/Enable Core1. + Disable/Enable Core1. 0:Disable, 1:Enable(Default). $EN_DIS **/ uint8_t DisableCore1; /** Offset 0x0022 - Disable Core2 - Disable/Enable Core2. + Disable/Enable Core2. 0:Disable, 1:Enable(Default). $EN_DIS **/ uint8_t DisableCore2; /** Offset 0x0023 - Disable Core3 - Disable/Enable Core3. + Disable/Enable Core3. 0:Disable, 1:Enable(Default). $EN_DIS **/ uint8_t DisableCore3; /** Offset 0x0024 - VMX Enable - Enable or Disable VMX. + Enable or Disable VMX. 0:Disable, 1:Enable(Default). $EN_DIS **/ uint8_t VmxEnable; /** Offset 0x0025 - Memory region allocation for Processor Trace - Memory region allocation for Processor Trace, allowed range is from 4K (0x0) to 128MB (0xF); <b>0xFF: Disable. + Memory region allocation for Processor Trace, allowed range is from 4K (0x0) to 128MB (0xF); <b>0xFF: Disable. 0xFF:Disable(Default) **/ uint8_t ProcTraceMemSize; /** Offset 0x0026 - Enable Processor Trace - Enable or Disable Processor Trace feature. + Enable or Disable Processor Trace feature. 0:Disable(Default), 1:Enable. $EN_DIS **/ uint8_t ProcTraceEnable; /** Offset 0x0027 - Eist - Enable or Disable Intel SpeedStep Technology. + Enable or Disable Intel SpeedStep Technology. 0:Disable, 1:Enable(Default). $EN_DIS **/ uint8_t Eist; /** Offset 0x0028 - Boot PState - Boot PState with HFM or LFM. 0: HFM; 1: LFM. + Boot PState with HFM or LFM. 0:HFM(Default), 1:LFM. **/ uint8_t BootPState; /** Offset 0x0029 - CPU power states (C-states) - Enable or Disable CPU power states (C-states). 0: Disable; 1: Enable. + Enable or Disable CPU power states (C-states). 0:Disable, 1:Enable(Default). $EN_DIS **/ uint8_t EnableCx; /** Offset 0x002A - Enhanced C-states - Enable or Disable Enhanced C-states. 0: Disable; 1: Enable. + Enable or Disable Enhanced C-states. 0:Disable(Default), 1:Enable. $EN_DIS **/ uint8_t C1e; /** Offset 0x002B - Bi-Directional PROCHOT# - Enable or Disable Bi-Directional PROCHOT#; 0: Disable; 1: Enable. + Enable or Disable Bi-Directional PROCHOT#. 0:Disable, 1:Enable(Default). $EN_DIS **/ uint8_t BiProcHot; /** Offset 0x002C - Max Pkg Cstate - Max Pkg Cstate. 0:PkgC0C1; 1:PkgC2; 2:PkgC3; 3:PkgC6; 4:PkgC7; 5:PkgC7s; 6:PkgC8; 7:PkgC9; 8:PkgC10; 9:PkgCMax; 254:PkgCpuDefault; 255:PkgAuto. + Max Pkg Cstate. 0:PkgC0C1, 1:PkgC2, 2:PkgC3(Default), 3:PkgC6, 4:PkgC7, 5:PkgC7s, 6:PkgC8, 7:PkgC9, 8:PkgC10, 9:PkgCMax, 254:PkgCpuDefault, 255:PkgAuto. **/ uint8_t PkgCStateLimit; @@ -119,407 +119,1220 @@ struct FSP_S_CONFIG { uint8_t UnusedUpdSpace0; /** Offset 0x002E - C-State auto-demotion - C-State Auto Demotion. 0:Disable C1 and C3 Auto-demotion; 1:Enable C3/C6/C7 Auto-demotion to C1; 2:Enable C6/C7 Auto-demotion to C3; 3:Enable C6/C7 Auto-demotion to C1 and C3. + C-State Auto Demotion. 0:Disable(Default) C1 and C3 Auto-demotion, 1:Enable C3/C6/C7 Auto-demotion to C1, 2:Enable C6/C7 Auto-demotion to C3, 3:Enable C6/C7 Auto-demotion to C1 and C3. **/ uint8_t CStateAutoDemotion; /** Offset 0x002F - C-State un-demotion - C-State un-demotion. 0:Disable C1 and C3 Un-demotion; 1:Enable C1 Un-demotion; 2:Enable C3 Un-demotion; 3:Enable C1 and C3 Un-demotion. + C-State un-demotion. 0:Disable(Default) C1 and C3 Un-demotion, 1:Enable C1 Un-demotion, 2:Enable C3 Un-demotion, 3:Enable C1 and C3 Un-demotion. **/ uint8_t CStateUnDemotion; /** Offset 0x0030 - Max Core C-State - Max Core C-State. 0:Unlimited;1:C1;2:C3;3:C6;4:C7;5:C8;6:C9;7:C10;8:CCx. + Max Core C-State. 0:Unlimited, 1:C1, 2:C3, 3:C6, 4:C7, 5:C8, 6:C9, 7:C10, 8:CCx(Default). **/ uint8_t MaxCoreCState; /** Offset 0x0031 - Package C-State Demotion - Enable or Disable Package Cstate Demotion. 0:Disable; 1: Enable. + Enable or Disable Package Cstate Demotion. 0:Disable(Default), 1:Enable. $EN_DIS **/ uint8_t PkgCStateDemotion; /** Offset 0x0032 - Package C-State Un-demotion - Enable or Disable Package Cstate UnDemotion. 0:Disable; 1: Enable. + Enable or Disable Package Cstate UnDemotion. 0:Disable(Default), 1:Enable. $EN_DIS **/ uint8_t PkgCStateUnDemotion; /** Offset 0x0033 - Turbo Mode - Enable or Disable long duration Turbo Mode. 0:Disable; 1: Enable. + Enable or Disable long duration Turbo Mode. 0:Disable, 1:Enable(Default). $EN_DIS **/ uint8_t TurboMode; -/** Offset 0x0034 +/** Offset 0x0034 - SC HDA Verb Table Entry Number + Number of Entries in Verb Table. 0(Default). **/ - uint8_t UnusedUpdSpace1[12]; + uint8_t HdaVerbTableEntryNum; + +/** Offset 0x0035 - SC HDA Verb Table Pointer + Pointer to Array of pointers to Verb Table. 0x00000000(Default). +**/ + uint32_t HdaVerbTablePtr; + +/** Offset 0x0039 - Enable/Disable P2SB device hidden. + Enable/Disable P2SB device hidden. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t HideP2sb; + +/** Offset 0x003A - IPU Enable/Disable + Enable/Disable IPU Device. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t IpuEn; + +/** Offset 0x003B - IMGU ACPI mode selection + 0:Auto, 1:IGFX Child device(Default), 2:ACPI device. + 0:Disable, 1:IGFX Child device, 2:ACPI device +**/ + uint8_t IpuAcpiMode; + +/** Offset 0x003C - GttMmAdr + GttMmAdr structure for initialization. 0xBF000000(Default). +**/ + uint32_t GttMmAdr; + +/** Offset 0x0040 - GmAdr + GmAdr structure for initialization. 0xA0000000(Default). +**/ + uint32_t GmAdr; + +/** Offset 0x0044 - Enable ForceWake + Enable/disable ForceWake Models. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t ForceWake; + +/** Offset 0x0045 - Enable PavpLock + Enable/disable PavpLock. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t PavpLock; + +/** Offset 0x0046 - Enable GraphicsFreqModify + Enable/disable GraphicsFreqModify. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t GraphicsFreqModify; + +/** Offset 0x0047 - Enable GraphicsFreqReq + Enable/disable GraphicsFreqReq. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t GraphicsFreqReq; + +/** Offset 0x0048 - Enable GraphicsVideoFreq + Enable/disable GraphicsVideoFreq. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t GraphicsVideoFreq; + +/** Offset 0x0049 - Enable PmLock + Enable/disable PmLock. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t PmLock; + +/** Offset 0x004A - Enable DopClockGating + Enable/disable DopClockGating. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t DopClockGating; + +/** Offset 0x004B - Enable UnsolicitedAttackOverride + Enable/disable UnsolicitedAttackOverride. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t UnsolicitedAttackOverride; + +/** Offset 0x004C - Enable WOPCMSupport + Enable/disable WOPCMSupport. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t WOPCMSupport; + +/** Offset 0x004D - Enable WOPCMSize + Enable/disable WOPCMSize. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t WOPCMSize; + +/** Offset 0x004E - Enable PowerGating + Enable/disable PowerGating. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t PowerGating; + +/** Offset 0x004F - Enable UnitLevelClockGating + Enable/disable UnitLevelClockGating. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t UnitLevelClockGating; + +/** Offset 0x0050 - Enable FastBoot + Enable/disable FastBoot. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t FastBoot; + +/** Offset 0x0051 - Enable DynSR + Enable/disable DynSR. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t DynSR; + +/** Offset 0x0052 - Enable SaIpuEnable + Enable/disable SaIpuEnable. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t SaIpuEnable; + +/** Offset 0x0053 - BMP Logo Data Size + BMP logo data buffer size. 0x00000000(Default). +**/ + uint32_t LogoSize; + +/** Offset 0x0057 - BMP Logo Data Pointer + BMP logo data pointer to a BMP format buffer. 0x00000000(Default). +**/ + uint32_t LogoPtr; + +/** Offset 0x005B - Graphics Configuration Data Pointer + Graphics configuration data used for initialization. 0x00000000(Default). +**/ + uint32_t GraphicsConfigPtr; + +/** Offset 0x005F - GT PM Support + Enable/Disable GT power management support. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t PmSupport; + +/** Offset 0x0060 - RC6(Render Standby) + Enable/Disable render standby support. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t EnableRenderStandby; + +/** Offset 0x0061 - PAVP Enable + Enable/Disable Protected Audio Visual Path (PAVP). 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t PavpEnable; + +/** Offset 0x0062 - PAVP PR3 + Enable/Disable PAVP PR3 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t PavpPr3; + +/** Offset 0x0063 - CdClock Frequency selection + 0:144MHz, 1:288MHz, 2:384MHz, 3:576MHz, 4:624MHz(Default). + 0: 144 MHz, 1: 288 MHz, 2: 384 MHz, 3: 576 MHz, 4: 624 MHz +**/ + uint8_t CdClock; + +/** Offset 0x0064 - Enable/Disable PeiGraphicsPeimInit + Enable/Disable PeiGraphicsPeimInit 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t PeiGraphicsPeimInit; + +/** Offset 0x0065 - Write Protection Support + Enable/disable Write Protection. 0:Disable, 1:Enable(Default). +**/ + uint8_t WriteProtectionEnable[5]; + +/** Offset 0x006A - Read Protection Support + Enable/disable Read Protection. 0:Disable, 1:Enable(Default). +**/ + uint8_t ReadProtectionEnable[5]; + +/** Offset 0x006F - Protected Range Limitation + The address of the upper limit of protection, 0x0FFFh(Default). +**/ + uint16_t ProtectedRangeLimit[5]; -/** Offset 0x0040 - HD-Audio I/O Buffer Ownership - Set HD-Audio I/O Buffer Ownership. +/** Offset 0x0079 - Protected Range Base + The base address of the upper limit of protection. 0x0000(Default). +**/ + uint16_t ProtectedRangeBase[5]; + +/** Offset 0x0083 - Enable SC Gaussian Mixture Models + Enable/disable SC Gaussian Mixture Models. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t Gmm; + +/** Offset 0x0084 - GMM Clock Gating - PGCB Clock Trunk + Enable/disable PGCB Clock Trunk. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t ClkGatingPgcbClkTrunk; + +/** Offset 0x0085 - GMM Clock Gating - Sideband + Enable/disable Sideband. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t ClkGatingSb; + +/** Offset 0x0086 - GMM Clock Gating - Sideband + Enable/disable Sideband. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t ClkGatingSbClkTrunk; + +/** Offset 0x0087 - GMM Clock Gating - Sideband Clock Partition + Enable/disable Sideband Clock Partition. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t ClkGatingSbClkPartition; + +/** Offset 0x0088 - GMM Clock Gating - Core + Enable/disable Core. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t ClkGatingCore; + +/** Offset 0x0089 - GMM Clock Gating - DMA + Enable/disable DMA. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t ClkGatingDma; + +/** Offset 0x008A - GMM Clock Gating - Register Access + Enable/disable Register Access. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t ClkGatingRegAccess; + +/** Offset 0x008B - GMM Clock Gating - Host + Enable/disable Host. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t ClkGatingHost; + +/** Offset 0x008C - GMM Clock Gating - Partition + Enable/disable Partition. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t ClkGatingPartition; + +/** Offset 0x008D - Clock Gating - Trunk + Enable/disable Trunk. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t ClkGatingTrunk; + +/** Offset 0x008E - HD Audio Support + Enable/disable HDA Audio Feature. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t HdaEnable; + +/** Offset 0x008F - HD Audio DSP Support + Enable/disable HDA Audio DSP Feature. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t DspEnable; + +/** Offset 0x0090 - Azalia wake-on-ring + Enable/disable Azalia wake-on-ring. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t Pme; + +/** Offset 0x0091 - HD-Audio I/O Buffer Ownership + Set HD-Audio I/O Buffer Ownership. 0:Disable(Default), 1:Enable. 0:HD-Audio link owns all the I/O buffers, 1:HD-Audio link owns 4 I/O buffers and I2S port owns 4 I/O buffers, 3:I2S port owns all the I/O buffers **/ uint8_t HdAudioIoBufferOwnership; -/** Offset 0x0041 +/** Offset 0x0092 - HD-Audio I/O Buffer Voltage + HD-Audio I/O Buffer Voltage Mode Selectiton . 0:3.3V(Default), 1:1.8V. + 0: 3.3V, 1: 1.8V +**/ + uint8_t HdAudioIoBufferVoltage; + +/** Offset 0x0093 - HD-Audio Virtual Channel Type + HD-Audio Virtual Channel Type Selectiton. 0:VC0(Default), 1:VC1. + 0: VC0, 1: VC1 +**/ + uint8_t HdAudioVcType; + +/** Offset 0x0094 - HD-Audio Link Frequency + HD-Audio Virtual Channel Type Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz, 4:96MHz, 5:Invalid. + 0: 6MHz, 1: 12MHz, 2: 24MHz, 3: 48MHz, 4: 96MHz, 5: Invalid +**/ + uint8_t HdAudioLinkFrequency; + +/** Offset 0x0095 - HD-Audio iDisp-Link Frequency + HD-Audio iDisp-Link Frequency Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz, 4:96MHz, 5:Invalid. + 0: 6MHz, 1: 12MHz, 2: 24MHz, 3: 48MHz, 4: 96MHz, 5: Invalid +**/ + uint8_t HdAudioIDispLinkFrequency; + +/** Offset 0x0096 - HD-Audio iDisp-Link T-Mode + HD-Audio iDisp-Link T-Mode Selectiton. 0:2T(Default), 1:1T. + 0: 2T, 1: 1T +**/ + uint8_t HdAudioIDispLinkTmode; + +/** Offset 0x0097 - HD-Audio Disp DMIC + HD-Audio Disp DMIC Selectiton. 0:Disable, 1:2ch array(Default), 2:4ch array. + 0: Disable, 1: 2ch array, 2: 4ch array **/ - uint8_t UnusedUpdSpace2[5]; + uint8_t DspEndpointDmic; -/** Offset 0x0046 - Enable SD controller - Enable/disable SD Card controller. +/** Offset 0x0098 - HD-Audio Bluetooth + Enable/Disable HD-Audio bluetooth. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t SdcardEnabled; + uint8_t DspEndpointBluetooth; -/** Offset 0x0047 - Enable SDIO controller - Enable/disable SDIO controller. +/** Offset 0x0099 - HD-Audio I2S SHK + Enable/Disable HD-Audio I2S SHK. 0:Disable(Default), 1:Enable. $EN_DIS **/ - uint8_t SdioEnabled; + uint8_t DspEndpointI2sSkp; -/** Offset 0x0048 - Enable eMMC controller - Enable/disable eMMC controller. +/** Offset 0x009A - HD-Audio I2S HP + Enable/Disable HD-Audio I2S HP. 0:Disable(Default), 1:Enable. $EN_DIS **/ - uint8_t eMMCEnabled; + uint8_t DspEndpointI2sHp; -/** Offset 0x0049 - Enable SATA - Enable/disable SATA controller. +/** Offset 0x009B - HD-Audio Controller Power Gating + Enable/Disable HD-Audio Controller Power Gating. 0:Disable(Default), 1:Enable. $EN_DIS **/ - uint8_t EnableSata; + uint8_t AudioCtlPwrGate; -/** Offset 0x004A - SATA Mode - Select SATA controller working mode. - 0:AHCI, 1:RAID +/** Offset 0x009C - HD-Audio ADSP Power Gating + Enable/Disable HD-Audio ADSP Power Gating. 0:Disable(Default), 1:Enable. + $EN_DIS **/ - uint8_t SataMode; + uint8_t AudioDspPwrGate; -/** Offset 0x004B - Aggressive SATA LPM Support - Enable SOC to aggressively enter link power state for SATA. +/** Offset 0x009D - HD-Audio CSME Memory Transfers + Enable/Disable HD-Audio CSME Memory Transfers. 0:VC0(Default), 1:VC2. + 0: VC0, 1: VC2 +**/ + uint8_t Mmt; + +/** Offset 0x009E - HD-Audio Host Memory Transfers + Enable/Disable HD-Audio Host Memory Transfers. 0:VC0(Default), 1:VC2. + 0: VC0, 1: VC2 +**/ + uint8_t Hmt; + +/** Offset 0x009F - HD-Audio BIOS Configuration Lock Down + Enable/Disable HD-Audio BIOS Configuration Lock Down. 0:Disable(Default), 1:Enable. $EN_DIS **/ - uint8_t SataSalpSupport; + uint8_t BiosCfgLockDown; -/** Offset 0x004C - Enable SATA ports - Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, and so on. +/** Offset 0x00A0 - HD-Audio Power Gating + Enable/Disable HD-Audio BIOS Configuration Lock Down. 0:Disable(Default), 1:Enable. + $EN_DIS **/ - uint8_t SataPortsEnable[2]; + uint8_t HDAudioPwrGate; -/** Offset 0x004E - Enable SATA DEVSLP Feature - Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each port, byte0 for port0, byte1 for port1, and so on. +/** Offset 0x00A1 - HD-Audio Clock Gatingn + Enable/Disable HD-Audio Clock Gating. 0:Disable(Default), 1:Enable. + $EN_DIS **/ - uint8_t SataPortsDevSlp[2]; + uint8_t HDAudioClkGate; -/** Offset 0x0050 - Enable PCIE RP - Enable/disable PCIE Root Ports. 0: disable, 1: enable. One byte for each port, byte0 for port1, byte1 for port2, and so on. +/** Offset 0x00A2 - Bitmask of DSP Feature + Set Bitmask of HD-Audio DSP Feature. 0x00000000(Default). + [BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6] - BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0: Intel WoV, 1: Windows Voice Activation **/ - uint8_t PcieRootPortEn[6]; + uint32_t DspFeatureMask; -/** Offset 0x0056 - Configure CLKREQ Number - Configure Root Port CLKREQ Number if CLKREQ is supported. Each value in array can be between 0-6. One byte for each port, byte0 for port1, byte1 for port2, and so on. +/** Offset 0x00A6 - Bitmask of supported DSP Post-Processing Modules + Set HD-Audio Bitmask of supported DSP Post-Processing Modules. 0x00000000(Default). + [BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6] - BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0: Intel WoV, 1: Windows Voice Activation **/ - uint8_t PcieRpClkReqNumber[6]; + uint32_t DspPpModuleMask; -/** Offset 0x005C +/** Offset 0x00AA - Enable High Precision Timer + Enable/Disable Hpet. 0:Disable, 1:Enable(Default). + $EN_DIS **/ - uint8_t UnusedUpdSpace3[16]; + uint8_t Hpet; -/** Offset 0x006C - Enable USB2 ports - Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for port1, and so on. +/** Offset 0x00AB - Hpet Valid BDF Value + Enable/Disable Hpet Valid BDF Value. 0:Disable(Default), 1:Enable. + $EN_DIS **/ - uint8_t PortUsb20Enable[8]; + uint8_t HpetBdfValid; -/** Offset 0x0074 - Enable USB3 ports - Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for port1, and so on. +/** Offset 0x00AC - Bus Number of Hpet + Completer ID of Bus Number of Hpet. Default = 0xFA(Default). **/ - uint8_t PortUsb30Enable[6]; + uint8_t HpetBusNumber; -/** Offset 0x007A - Enable XHCI SSIC ports - Enable/disable XHCI SSIC ports. One byte for each port, byte0 for port0, byte1 for port1. +/** Offset 0x00AD - Device Number of Hpet + Completer ID of Device Number of Hpet. 0x1F(Default). **/ - uint8_t SsicPortEnable[2]; + uint8_t HpetDeviceNumber; -/** Offset 0x007C - Enable SMBus - Enable/disable SMBus controller. +/** Offset 0x00AE - Function Number of Hpet + Completer ID of Function Number of Hpet. 0x00(Default). +**/ + uint8_t HpetFunctionNumber; + +/** Offset 0x00AF - Hpet Base Address + Hpet Base Address. 0xFED00000(Default). +**/ + uint32_t HpetBase; + +/** Offset 0x00B3 - IoApic Valid BDF Value + Enable/Disable IoApic Valid BDF Value. 0:Disable(Default), 1:Enable. $EN_DIS **/ - uint8_t SmbusEnable; + uint8_t IoApicBdfValid; -/** Offset 0x007D - SC HDA Verb Table Entry Number - Number of Entries in Verb Table. +/** Offset 0x00B4 - Bus Number of IoApic + Completer ID of Bus Number of IoApic. 0xFA(Default). **/ - uint8_t HdaVerbTableEntryNum; + uint8_t IoApicBusNumber; -/** Offset 0x007E - SC HDA Verb Table Pointer - Pointer to Array of pointers to Verb Table. +/** Offset 0x00B5 - Device Number of IoApic + Completer ID of Device Number of IoApic. 0x0F(Default). **/ - uint32_t HdaVerbTablePtr; + uint8_t IoApicDeviceNumber; -/** Offset 0x0082 +/** Offset 0x00B6 - Function Number of IoApic + Completer ID of Function Number of IoApic. 0x00(Default). **/ - uint8_t UnusedUpdSpace4[14]; + uint8_t IoApicFunctionNumber; -/** Offset 0x0090 - Enable/Disable P2SB device hidden. - Enable/Disable P2SB device hidden. +/** Offset 0x00B7 - IOAPIC Entry 24-119 + Enable/Disable IOAPIC Entry 24-119. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t HideP2sb; + uint8_t IoApicEntry24_119; + +/** Offset 0x00B8 - IO APIC ID + This member determines IOAPIC ID. 0x01(Default). +**/ + uint8_t IoApicId; -/** Offset 0x0091 - Ufs Enable/Disable - Enable/Disable Ufs. +/** Offset 0x00B9 - IoApic Range + Define address bits 19:12 for the IOxAPIC range. 0x00(Default). +**/ + uint8_t IoApicRangeSelect; + +/** Offset 0x00BA - ISH Controller + Enable/Disable ISH Controller. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t UfsEnabled; + uint8_t IshEnable; -/** Offset 0x0092 - IPU Enable/Disable - Enable/Disable IPU Device. +/** Offset 0x00BB - ISH Controller + Enable/Disable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t IpuEn; + uint8_t BiosInterface; -/** Offset 0x0093 - IMGU ACPI mode selection - 0=Auto, 1(Default)=IGFX Child device, 2=ACPI device - 0:Disable, 1:IGFX Child device, 2:ACPI device +/** Offset 0x00BC - Bios LockDown Enable + Enable the BIOS Lock Enable (BLE) feature and set EISS bit. 0:Disable(Default), 1:Enable. + $EN_DIS **/ - uint8_t IpuAcpiMode; + uint8_t BiosLock; -/** Offset 0x0094 - ResetSelect - ResetSelect. 0x6:warm reset; 0xE:cold reset +/** Offset 0x00BD - SPI EISS Status + Enable/Disable InSMM.STS (EISS) in SPI. 0:Disable, 1:Enable(Default). + $EN_DIS **/ - uint8_t ResetSelect; + uint8_t SpiEiss; -/** Offset 0x0095 - CRIDSettings - PMC CRID setting. 0:Disable;1:CRID_1;2:CRID_2;3:CRID_3 +/** Offset 0x00BE - BiosLock SWSMI Number + This member describes the SwSmi value for Bios Lock. 0xA9(Default). **/ - uint8_t CRIDSettings; + uint8_t BiosLockSwSmiNumber; -/** Offset 0x0096 - Enable HPET - Enable/disable HPET. +/** Offset 0x00BF - LPSS IOSF PMCTL S0ix Enable + Enable/Disable LPSS IOSF Bridge PMCTL Register S0ix Bits. 0:Disable(Default), 1:Enable. $EN_DIS **/ - uint8_t Hpet; + uint8_t S0ixEnable; -/** Offset 0x0097 - Enable PCIE Clock Gating - Enable/disable PCIE Clock Gating.0:Enable;1:Disable +/** Offset 0x00C0 - LPSS I2C Clock Gating Configuration + Enable/Disable LPSS I2C Clock Gating. 0:Disable, 1:Enable(Default). +**/ + uint8_t I2cClkGateCfg[8]; + +/** Offset 0x00C8 - PSS HSUART Clock Gating Configuration + Enable/Disable LPSS HSUART Clock Gating. 0:Disable, 1:Enable(Default). +**/ + uint8_t HsuartClkGateCfg[4]; + +/** Offset 0x00CC - LPSS SPI Clock Gating Configuration + Enable/Disable LPSS SPI Clock Gating. 0:Disable, 1:Enable(Default). +**/ + uint8_t SpiClkGateCfg[3]; + +/** Offset 0x00CF - I2C Device 0 + Enable/Disable I2C Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t I2c0Enable; + +/** Offset 0x00D0 - I2C Device 1 + Enable/Disable I2C Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t I2c1Enable; + +/** Offset 0x00D1 - I2C Device 2 + Enable/Disable I2C Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t I2c2Enable; + +/** Offset 0x00D2 - I2C Device 3 + Enable/Disable I2C Device 3. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t I2c3Enable; + +/** Offset 0x00D3 - I2C Device 4 + Enable/Disable I2C Device 4. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t I2c4Enable; + +/** Offset 0x00D4 - I2C Device 5 + Enable/Disable I2C Device 5. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t I2c5Enable; + +/** Offset 0x00D5 - I2C Device 6 + Enable/Disable I2C Device 6. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t I2c6Enable; + +/** Offset 0x00D6 - I2C Device 7 + Enable/Disable I2C Device 7. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t I2c7Enable; + +/** Offset 0x00D7 - UART Device 0 + Enable/Disable UART Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t Hsuart0Enable; + +/** Offset 0x00D8 - UART Device 1 + Enable/Disable UART Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t Hsuart1Enable; + +/** Offset 0x00D9 - UART Device 2 + Enable/Disable UART Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t Hsuart2Enable; + +/** Offset 0x00DA - UART Device 3 + Enable/Disable UART Device 3. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t Hsuart3Enable; + +/** Offset 0x00DB - SPI UART Device 0 + Enable/Disable SPI Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t Spi0Enable; + +/** Offset 0x00DC - SPI UART Device 1 + Enable/Disable SPI Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t Spi1Enable; + +/** Offset 0x00DD - SPI UART Device 2 + Enable/Disable SPI Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + uint8_t Spi2Enable; + +/** Offset 0x00DE - UART Debug Bass Address + UART Debug Bass Address. 0x00000000(Default). +**/ + uint32_t Uart2KernelDebugBaseAddress; + +/** Offset 0x00E2 - OS Debug Feature + Enable/Disable OS Debug Feature. 0:Disable(Default), 1: Enable. + $EN_DIS +**/ + uint8_t OsDbgEnable; + +/** Offset 0x00E3 - Exi Feature + Enable/Disable Exi Feature. 0:Disable(Default), 1: Enable. + $EN_DIS +**/ + uint8_t ExiEnable; + +/** Offset 0x00E4 - Enable PCIE Clock Gating + Enable/disable PCIE Clock Gating. 0:Enable, 1:Disable(Default). $EN_DIS **/ uint8_t PcieClockGatingDisabled; -/** Offset 0x0098 - Enable PCIE Root Port 8xh Decode - Enable/disable PCIE Root Port 8xh Decode.0:Disable;1:Enable +/** Offset 0x00E5 - Enable PCIE Root Port 8xh Decode + Enable/disable PCIE Root Port 8xh Decode. 0:Disable, 1:Enable(Default). $EN_DIS **/ uint8_t PcieRootPort8xhDecode; -/** Offset 0x0099 - PCIE 8xh Decode Port Index - PCIE 8xh Decode Port Index. +/** Offset 0x00E6 - PCIE 8xh Decode Port Index + PCIE 8xh Decode Port Index. 0x00(Default). **/ uint8_t Pcie8xhDecodePortIndex; -/** Offset 0x009A - Enable PCIE Root Port Peer Memory Write - Enable/disable PCIE root port peer memory write.0:Disable;1:Enable +/** Offset 0x00E7 - Enable PCIE Root Port Peer Memory Write + Enable/disable PCIE root port peer memory write. 0:Disable(Default), 1:Enable. $EN_DIS **/ uint8_t PcieRootPortPeerMemoryWriteEnable; -/** Offset 0x009B - Enable SC Gaussian Mixture Models - Enable/disable SC Gaussian Mixture Models.0:Disable;1:Enable - $EN_DIS +/** Offset 0x00E8 - PCIE SWSMI Nubmer + This member describes the SwSmi value for override PCIe ASPM table. 0xAA(Default). **/ - uint8_t Gmm; + uint8_t PcieAspmSwSmiNumber; -/** Offset 0x009C - GttMmAdr - GttMmAdr structure for initialization. +/** Offset 0x00E9 - PCI Express Root Port + Control the PCI Express Root Port . 0:Disable, 1:Enable(Default). **/ - uint32_t GttMmAdr; + uint8_t PcieRootPortEn[6]; + +/** Offset 0x00EF - Hide PCIE Root Port Configuration Space + Enable/disable Hide PCIE Root Port Configuration Space. 0:Disable(Default), 1:Enable. +**/ + uint8_t PcieRpHide[6]; + +/** Offset 0x00F5 - PCIE Root Port Slot Implement + Enable/disable PCIE Root Port Slot Implement. 0:Disable, 1:Enable(Default). +**/ + uint8_t PcieRpSlotImplemented[6]; + +/** Offset 0x00FB - Hot Plug + PCI Express Hot Plug Enable/Disable. 0:Disable, 1:Enable(Default). +**/ + uint8_t PcieRpHotPlug[6]; + +/** Offset 0x0101 - PCIE PM SCI + Enable/Disable PCI Express PME SCI. 0:Disable(Default), 1:Enable. +**/ + uint8_t PcieRpPmSci[6]; + +/** Offset 0x0107 - PCIE Root Port Extended Sync + Enable/Disable PCIE Root Port Extended Sync. 0:Disable, 1:Enable(Default). +**/ + uint8_t PcieRpExtSync[6]; + +/** Offset 0x010D - Transmitter Half Swing + Transmitter Half Swing Enable/Disable. 0:Disable, 1:Enable(Default). +**/ + uint8_t PcieRpTransmitterHalfSwing[6]; + +/** Offset 0x0113 - ACS + Enable/Disable Access Control Services Extended Capability. 0:Disable, 1:Enable(Default). +**/ + uint8_t PcieRpAcsEnabled[6]; + +/** Offset 0x0119 - Clock Request Support + Enable/Disable CLKREQ# Support. 0:Disable, 1:Enable(Default). +**/ + uint8_t PcieRpClkReqSupported[6]; -/** Offset 0x00A0 +/** Offset 0x011F - Configure CLKREQ Number + Configure Root Port CLKREQ Number if CLKREQ is supported. Default=0x04, 0x05, 0x00, 0x01, 0x02, 0x03. **/ - uint8_t UnusedUpdSpace5[96]; + uint8_t PcieRpClkReqNumber[6]; + +/** Offset 0x0125 - CLKREQ# Detection + Enable/Disable CLKREQ# Detection Probe. 0: Disable(Default), 1: Enable. +**/ + uint8_t PcieRpClkReqDetect[6]; + +/** Offset 0x012B - Advanced Error Reporting + Enable/Disable Advanced Error Reporting. 0: Disable(Default), 1: Enable. +**/ + uint8_t AdvancedErrorReporting[6]; + +/** Offset 0x0131 - PME Interrupt + Enable/Disable PME Interrupt. 0: Disable(Default), 1: Enable. +**/ + uint8_t PmeInterrupt[6]; + +/** Offset 0x0137 - URR + PCI Express Unsupported Request Reporting Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + uint8_t UnsupportedRequestReport[6]; + +/** Offset 0x013D - FER + PCI Express Device Fatal Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + uint8_t FatalErrorReport[6]; + +/** Offset 0x0143 - NFER + PCI Express Device Non-Fatal Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + uint8_t NoFatalErrorReport[6]; + +/** Offset 0x0149 - CER + PCI Express Device Correctable Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + uint8_t CorrectableErrorReport[6]; + +/** Offset 0x014F - SEFE + Root PCI Express System Error on Fatal Error Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + uint8_t SystemErrorOnFatalError[6]; + +/** Offset 0x0155 - SENFE + Root PCI Express System Error on Non-Fatal Error Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + uint8_t SystemErrorOnNonFatalError[6]; + +/** Offset 0x015B - SECE + Root PCI Express System Error on Correctable Error Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + uint8_t SystemErrorOnCorrectableError[6]; + +/** Offset 0x0161 - PCIe Speed + Configure PCIe Speed. 0:Auto(Default), 1:Gen1, 2:Gen2, 3:Gen3. +**/ + uint8_t PcieRpSpeed[6]; + +/** Offset 0x0167 - Physical Slot Number + Physical Slot Number for PCIE Root Port. Default=0x00, 0x01, 0x02, 0x03, 0x04, 0x05. +**/ + uint8_t PhysicalSlotNumber[6]; + +/** Offset 0x016D - CTO + Enable/Disable PCI Express Completion Timer TO . 0:Disable(Default), 1:Enable. +**/ + uint8_t PcieRpCompletionTimeout[6]; + +/** Offset 0x0173 - PTM Support + Enable/Diable PTM Support. 0:Disable(Default), 1:Enable. +**/ + uint8_t PtmEnable[6]; -/** Offset 0x0100 - Enable S0ix - Enable/disable S0ix.0:Disable;1:Enable +/** Offset 0x0179 - ASPM + PCI Express Active State Power Management settings. 0:Disable, 1:L0s, 2:L1, 3:L0sL1, 4:Auto(Default). +**/ + uint8_t PcieRpAspm[6]; + +/** Offset 0x017F - L1 Substates + PCI Express L1 Substates settings. 0:Disable, 1:L1.1, 2:L1.2, 3:L1.1 & L1.2(Default). +**/ + uint8_t PcieRpL1Substates[6]; + +/** Offset 0x0185 - PCH PCIe LTR + PCH PCIE Latency Reporting Enable/Disable. 0:Disable, 1:Enable(Default). +**/ + uint8_t PcieRpLtrEnable[6]; + +/** Offset 0x018B - PCIE LTR Lock + PCIE LTR Configuration Lock. 0:Disable(Default), 1:Enable. +**/ + uint8_t PcieRpLtrConfigLock[6]; + +/** Offset 0x0191 - PME_B0_S5 Diable bit + PME_B0_S5_DIS bit in the General PM Configuration B (GEN_PMCON_B) register. 0:Disable(Default), 1:Enable. $EN_DIS **/ - uint8_t S0ix; + uint8_t PmeB0S5Dis; -/** Offset 0x0101 - GmAdr - GmAdr structure for initialization. +/** Offset 0x0192 - PCI Clock Run + This member describes whether or not the PCI ClockRun feature of SC should be enabled. 0:Disable(Default), 1:Enable. + $EN_DIS **/ - uint32_t GmAdr; + uint8_t PciClockRun; -/** Offset 0x0105 - Enable ForceWake - Enable/disable ForceWake Models.0:Disable;1:Enable +/** Offset 0x0193 - Enable/Disable Timer 8254 Clock Setting + Enable/Disable Timer 8254 Clock. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t ForceWake; + uint8_t Timer8254ClkSetting; -/** Offset 0x0106 - Enable PavpLock - Enable/disable PavpLock.0:Disable;1:Enable +/** Offset 0x0194 - Chipset SATA + Enables or Disables the Chipset SATA Controller. The Chipset SATA controller supports the 2 black internal SATA ports (up to 3Gb/s supported per port). 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t PavpLock; + uint8_t EnableSata; -/** Offset 0x0107 - Enable GraphicsFreqModify - Enable/disable GraphicsFreqModify.0:Disable;1:Enable +/** Offset 0x0195 - SATA Mode Selection + Determines how SATA controller(s) operate. 0:AHCI(Default), 1:RAID. + 0:AHCI, 1:RAID +**/ + uint8_t SataMode; + +/** Offset 0x0196 - Aggressive LPM Support + Enable PCH to aggressively enter link power state. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t GraphicsFreqModify; + uint8_t SataSalpSupport; -/** Offset 0x0108 - Enable GraphicsFreqReq - Enable/disable GraphicsFreqReq.0:Disable;1:Enable +/** Offset 0x0197 - SATA Power Optimization + Enable SATA Power Optimizer on SC side. 0:Disable(Default), 1:Enable. $EN_DIS **/ - uint8_t GraphicsFreqReq; + uint8_t SataPwrOptEnable; -/** Offset 0x0109 - Enable GraphicsVideoFreq - Enable/disable GraphicsVideoFreq.0:Disable;1:Enable +/** Offset 0x0198 - eSATA Speed Limit + Enable/Disable eSATA Speed Limit. 0:Disable(Default), 1:Enable. $EN_DIS **/ - uint8_t GraphicsVideoFreq; + uint8_t eSATASpeedLimit; + +/** Offset 0x0199 - SATA Speed Limit + SATA Speed Limit. 0h:ScSataSpeed(Default), 1h:1.5Gb/s(Gen 1), 2h:3Gb/s(Gen 2), 3h:6Gb/s(Gen 3). + 0:Default, 1: 1.5 Gb/s (Gen 1), 2: 3 Gb/s(Gen 2), 3: 6 Gb/s (Gen 1) +**/ + uint8_t SpeedLimit; -/** Offset 0x010A - Enable PmLock - Enable/disable PmLock.0:Disable;1:Enable +/** Offset 0x019A - SATA Port + Enable or Disable SATA Port. 0:Disable, 1:Enable(Default). +**/ + uint8_t SataPortsEnable[2]; + +/** Offset 0x019C - SATA Port DevSlp + Enable/Disable SATA Port DevSlp. Board rework for LP needed before enable. 0:Disable(Default), 1:Enable. +**/ + uint8_t SataPortsDevSlp[2]; + +/** Offset 0x019E - SATA Port HotPlug + Enable/Disable SATA Port Hotplug . 0:Disable(Default), 1:Enable. +**/ + uint8_t SataPortsHotPlug[2]; + +/** Offset 0x01A0 - Mechanical Presence Switch + Controls reporting if this port has an Mechanical Presence Switch.\nNote:Requires hardware support. 0:Disable, 1:Enable(Default). +**/ + uint8_t SataPortsInterlockSw[2]; + +/** Offset 0x01A2 - External SATA Ports + Enable/Disable External SATA Ports. 0:Disable(Default), 1:Enable. +**/ + uint8_t SataPortsExternal[2]; + +/** Offset 0x01A4 - Spin Up Device + Enable/Disable device spin up at boot on selected Sata Ports. 0:Disable(Default), 1:Enable. +**/ + uint8_t SataPortsSpinUp[2]; + +/** Offset 0x01A6 - SATA Solid State + Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. 0:Hard Disk Drive(Default), 1:Solid State Drive. +**/ + uint8_t SataPortsSolidStateDrive[2]; + +/** Offset 0x01A8 - DITO Configuration + Enable/Disable DITO Configuration. 0:Disable(Default), 1:Enable. +**/ + uint8_t SataPortsEnableDitoConfig[2]; + +/** Offset 0x01AA - DM Value + DM Value. 0:Minimum, 0x0F:Maximum(Default). +**/ + uint8_t SataPortsDmVal[2]; + +/** Offset 0x01AC - DITO Value + DEVSLP Idle Timeout Value. 0:Minimum, 0x03FF:Maximum, 0x0271(Default). +**/ + uint16_t SataPortsDitoVal[2]; + +/** Offset 0x01B0 - Subsystem Vendor ID + Subsystem Vendor ID. 0x8086(Default). +**/ + uint16_t SubSystemVendorId; + +/** Offset 0x01B2 - Subsystem ID + Subsystem ID. 0x7270(Default). +**/ + uint16_t SubSystemId; + +/** Offset 0x01B4 - PM Base Address + PM Base Address. 0x400(Default). +**/ + uint16_t AcpiBase; + +/** Offset 0x01B6 - PMC Base Address + PMC Base Address. 0xD10010000(Default). +**/ + uint32_t PmcBase; + +/** Offset 0x01BA - P2SB Base Address + P2SB Base Address. 0xD0000000(Default). +**/ + uint32_t P2sbBase; + +/** Offset 0x01BE - CRIDSettings + PMC CRID setting. 0:Disable(Default), 1:CRID_1, 2:CRID_2, 3:CRID_3. +**/ + uint8_t CRIDSettings; + +/** Offset 0x01BF - ResetSelect + ResetSelect. 0x6:warm reset(Default), 0xE:cold reset. +**/ + uint8_t ResetSelect; + +/** Offset 0x01C0 - SD Card Support (D27:F0) + Enable/Disable SD Card Support. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t PmLock; + uint8_t SdcardEnabled; -/** Offset 0x010B +/** Offset 0x01C1 - SeMMC Support (D28:F0) + Enable/Disable eMMC Support. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + uint8_t eMMCEnabled; + +/** Offset 0x01C2 - eMMC Max Speed + Select the eMMC max Speed allowed. 0:HS400(Default), 1:HS200, 2:DDR50. + 0:HS400, 1: HS200, 2:DDR50 **/ - uint8_t UnusedUpdSpace6[5]; + uint8_t eMMCHostMaxSpeed; -/** Offset 0x0110 - Enable DopClockGating - Enable/disable DopClockGating.0:Disable;1:Enable +/** Offset 0x01C3 - UFS Support (D29:F0) + Enable/Disable SDIO Support. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t DopClockGating; + uint8_t UfsEnabled; -/** Offset 0x0111 - Enable UnsolicitedAttackOverride - Enable/disable UnsolicitedAttackOverride.0:Disable;1:Enable +/** Offset 0x01C4 - SDIO Support (D30:F0) + Enable/Disable SDIO Support. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t UnsolicitedAttackOverride; + uint8_t SdioEnabled; -/** Offset 0x0112 - Enable WOPCMSupport - Enable/disable WOPCMSupport.0:Disable;1:Enable +/** Offset 0x01C5 - GPP Lock Feature + Enable/Disable GPP lock. 0:Disable(Default), 1:Enable. $EN_DIS **/ - uint8_t WOPCMSupport; + uint8_t GppLock; -/** Offset 0x0113 - Enable WOPCMSize - Enable/disable WOPCMSize.0:Disable;1:Enable +/** Offset 0x01C6 - Serial IRQ + Enable/Disable Serial IRQ. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t WOPCMSize; + uint8_t SirqEnable; -/** Offset 0x0114 - Enable PowerGating - Enable/disable PowerGating.0:Disable;1:Enable +/** Offset 0x01C7 - Serial IRQ Mode + Serial IRQ Mode Selection. 0:Quiet mode(Default), 1:Continuous mode. $EN_DIS **/ - uint8_t PowerGating; + uint8_t SirqMode; -/** Offset 0x0115 - Enable UnitLevelClockGating - Enable/disable UnitLevelClockGating.0:Disable;1:Enable +/** Offset 0x01C8 - Start Frame Pulse Width + Start Frame Pulse Width Value. 0:ScSfpw4Clk(Default), 1: ScSfpw6Clk, 2:ScSfpw8Clk. $EN_DIS **/ - uint8_t UnitLevelClockGating; + uint8_t StartFramePulse; -/** Offset 0x0116 - Enable FastBoot - Enable/disable FastBoot.0:Disable;1:Enable +/** Offset 0x01C9 - Enable SMBus + Enable/disable SMBus controller. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t FastBoot; + uint8_t SmbusEnable; -/** Offset 0x0117 - Enable DynSR - Enable/disable DynSR.0:Disable;1:Enable +/** Offset 0x01CA - SMBus ARP Support + Enable/disable SMBus ARP Support. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t DynSR; + uint8_t ArpEnable; + +/** Offset 0x01CB - SMBus Base Address (IO space) + SMBUS Base Address (IO space). 0xEFA0(Default). +**/ + uint16_t SmbusIoBase; + +/** Offset 0x01CD - SMBus Table Elements + The number of elements in the Reserved SMBus Address Table. 0x0080(Default). +**/ + uint16_t NumRsvdSmbusAddresses; + +/** Offset 0x01CF - Reserved SMBus Address Table + Array of addresses reserved for non-ARP-capable SMBus devices. 0x00(Default). +**/ + uint8_t RsvdSmbusAddressTable[128]; -/** Offset 0x0118 - Enable SaIpuEnable - Enable/disable SaIpuEnable.0:Disable;1:Enable +/** Offset 0x024F - XHCI Disable Compliance Mode + Options to disable XHCI Link Compliance Mode. Default is FALSE to not disable Compliance Mode. Set TRUE to disable Compliance Mode. 0:FALSE(Default), 1:True. $EN_DIS **/ - uint8_t SaIpuEnable; + uint8_t DisableComplianceMode; -/** Offset 0x0119 - Enable VtdEnable - Enable/disable VtdEnable.0:Disable;1:Enable +/** Offset 0x0250 - USB Per-Port Control + Control each of the USB ports (0~3) enable/disable. 0:Disable(Default), 1:Enable. $EN_DIS **/ - uint8_t VtdEnable; + uint8_t UsbPerPortCtl; -/** Offset 0x011A - BMP Logo Data Size - BMP logo data buffer size. +/** Offset 0x0251 - xHCI Mode + Mode of operation of xHCI controller. 0:Disable, 1:Enable, 2:Auto(Default), 3:SmartAuto. + $EN_DIS **/ - uint32_t LogoSize; + uint8_t Usb30Mode; -/** Offset 0x011E - BMP Logo Data Pointer - BMP logo data pointer to a BMP format buffer. +/** Offset 0x0252 - Enable USB2 ports + Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for port1, and so on. 0x01(Default). **/ - uint32_t LogoPtr; + uint8_t PortUsb20Enable[8]; -/** Offset 0x0122 - Graphics Configuration Data Pointer - Graphics configuration data used for initialization. +/** Offset 0x025A - USB20 Over Current Pin + Over Current Pin number of USB 2.0 Port. 0x00(Default). **/ - uint32_t GraphicsConfigPtr; + uint8_t PortUs20bOverCurrentPin[8]; -/** Offset 0x0126 - GT PM Support - Enable/Disable GT power management support. +/** Offset 0x0262 - Enable USB3 ports + Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for port1, and so on. 0x01(Default). +**/ + uint8_t PortUsb30Enable[6]; + +/** Offset 0x0268 - USB20 Over Current Pin + Over Current Pin number of USB 3.0 Port. 0x01(Default). +**/ + uint8_t PortUs30bOverCurrentPin[6]; + +/** Offset 0x026E - XDCI Support + Enable/Disable XDCI. 0:Disable, 1:PCI_Mode(Default), 2:ACPI_mode. $EN_DIS **/ - uint8_t PmSupport; + uint8_t UsbOtg; -/** Offset 0x0127 - RC6(Render Standby) - Enable/Disable render standby support. +/** Offset 0x026F - Enable XHCI HSIC Support + Enable/Disable USB HSIC1. 0:Disable(Default), 1:Enable. $EN_DIS **/ - uint8_t EnableRenderStandby; + uint8_t HsicSupportEnable; -/** Offset 0x0128 - PAVP Enable - Enable/Disable Protected Audio Visual Path (PAVP). +/** Offset 0x0270 - Enable XHCI SSIC Support + Enable/disable XHCI SSIC ports. One byte for each port, byte0 for port0, byte1 for port1. 0x00(Default). +**/ + uint8_t SsicPortEnable[2]; + +/** Offset 0x0272 - SSIC Dlane PowerGating + Enable/Disable SSIC Data lane Power Gating. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t PavpEnable; + uint16_t DlanePwrGating; -/** Offset 0x0129 - PAVP PR3 - Enable/Disable PAVP PR3 +/** Offset 0x0274 - VT-d + Enable/Disable VT-d. 0:Disable(Default), 1:Enable. $EN_DIS **/ - uint8_t PavpPr3; + uint8_t VtdEnable; -/** Offset 0x012A - CdClock Frequency selection - 0: 144 MHz, 1: 288 MHz, 2: 384 MHz, 3: 576 MHz, 4(Default): 624 MHz - 0: 144 MHz, 1: 288 MHz, 2: 384 MHz, 3: 576 MHz, 4: 624 MHz +/** Offset 0x0275 - HDAudio Delay Timer + The delay timer after Azalia reset. 0x012C(Default). **/ - uint8_t CdClock; + uint16_t ResetWaitTimer; -/** Offset 0x012B - Enable/Disable PeiGraphicsPeimInit - Enable(Default): Enable PeiGraphicsPeimInit, Disable: Disable PeiGraphicsPeimInit +/** Offset 0x0277 - SMI Lock bit + Enable/Disable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t PeiGraphicsPeimInit; + uint8_t LockDownGlobalSmi; -/** Offset 0x012C - Enable/Disable Timer 8254 Clock Setting - Enable/Disable Timer 8254 Clock +/** Offset 0x0278 - RTC Lock Bits + Enable/Disable RTC Lock Bits. 0:Disable, 1:Enable(Default). $EN_DIS **/ - uint8_t Timer8254ClkSetting; + uint8_t RtcLock; + +/** Offset 0x0279 - XHCI SSIC RATE + Set XHCI SSIC1 Rate to A Series or B Series. 1:A Series(Default), 2:B Series. +**/ + uint8_t SsicRate[2]; + +/** Offset 0x027B - SATA Test Mode Selection + Enable/Disable SATA Test Mode. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint8_t SataTestMode; + +/** Offset 0x027C - SMBus Dynamic Power Gating + Enable/Disable SMBus dynamic power gating. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + uint16_t DynamicPowerGating; + +/** Offset 0x027E - Max Snoop Latency + Latency Tolerance Reporting Max Snoop Latency. 0x0000(Default). +**/ + uint16_t PcieRpLtrMaxSnoopLatency[6]; + +/** Offset 0x028A - Snoop Latency Override + Snoop Latency Override for PCH PCIE. \nDisabled:Disable override.\nManual:Manually enter override values.\nAuto:Maintain default BIOS flow. 0:Disable, 1:Enable, 2:Auto(Default). +**/ + uint8_t PcieRpSnoopLatencyOverrideMode[6]; + +/** Offset 0x0290 - Snoop Latency Value + LTR Snoop Latency value of PCH PCIE. 0:Minimum, 0x03FF:Maximum, 0x003C(Default). +**/ + uint16_t PcieRpSnoopLatencyOverrideValue[6]; + +/** Offset 0x029C - Snoop Latency Multiplier + LTR Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default), 3:32768ns, 4:1048576ns, 5:33554432ns. +**/ + uint8_t PcieRpSnoopLatencyOverrideMultiplier[6]; + +/** Offset 0x02A2 - Max Non-Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. 0x0000(Default). +**/ + uint16_t PcieRpLtrMaxNonSnoopLatency[6]; -/** Offset 0x012D +/** Offset 0x02AE - Non Snoop Latency Override + Non Snoop Latency Override for PCH PCIE. \nDisabled:Disable override.\nManual:Manually enter override values.\nAuto: Maintain default BIOS flow. 0:Disable, 1:Enable, 2:Auto(Default). **/ - uint8_t ReservedFspsUpd[211]; + uint8_t PcieRpNonSnoopLatencyOverrideMode[6]; + +/** Offset 0x02B4 - Non Snoop Latency Value + LTR Non Snoop Latency value of PCH PCIE. 0:Minimum, 0x03FF:Maximum, 0x003C(Default). +**/ + uint16_t PcieRpNonSnoopLatencyOverrideValue[6]; + +/** Offset 0x02C0 - Non Snoop Latency Multiplier + LTR Non Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default), 3:32768ns, 4:1048576ns, 5:33554432ns. +**/ + uint8_t PcieRpNonSnoopLatencyOverrideMultiplier[6]; + +/** Offset 0x02C6 - PCIE Root Port Slot Power Limit Scale + Specifies scale used for slot power limit value. 0x00(Default). +**/ + uint8_t PcieRpSlotPowerLimitScale[6]; + +/** Offset 0x02CC - PCIE Root Port Slot Power Limit Value + Specifies upper limit on power supplie by slot. 0x00(Default). +**/ + uint8_t PcieRpSlotPowerLimitValue[6]; + +/** Offset 0x02D2 - Skip Multi-Processor Initialization + When this is skipped, boot loader must initialize processors before SilicionInit API. 0: Initialize(Default), <b>1: Skip + $EN_DIS +**/ + uint8_t SkipMpInit; + +/** Offset 0x02D3 +**/ + uint8_t ReservedFspsUpd[45]; } __attribute__((packed)); /** Fsp S Test Configuration **/ struct FSP_S_TEST_CONFIG { -/** Offset 0x0200 +/** Offset 0x0300 **/ uint32_t Signature; -/** Offset 0x0204 +/** Offset 0x0304 **/ uint8_t ReservedFspsTestUpd[12]; } __attribute__((packed)); @@ -528,17 +1341,19 @@ struct FSP_S_TEST_CONFIG { **/ struct FSP_S_RESTRICTED_CONFIG { -/** Offset 0x0210 +/** Offset 0x0310 **/ uint32_t Signature; -/** Offset 0x0214 +/** Offset 0x0314 **/ uint8_t ReservedFspsRestrictedUpd[12]; } __attribute__((packed)); #define FSPS_UPD_SIGNATURE 0x4450555F53505346 /* 'FSPS_UPD' */ +/** Fsp S UPD Configuration +**/ struct FSPS_UPD { /** Offset 0x0000 @@ -549,15 +1364,15 @@ struct FSPS_UPD { **/ struct FSP_S_CONFIG FspsConfig; -/** Offset 0x0200 +/** Offset 0x0300 **/ struct FSP_S_TEST_CONFIG FspsTestConfig; -/** Offset 0x0210 +/** Offset 0x0310 **/ struct FSP_S_RESTRICTED_CONFIG FspsRestrictedConfig; -/** Offset 0x0220 +/** Offset 0x0320 **/ uint16_t UpdTerminator; } __attribute__((packed)); |