summaryrefslogtreecommitdiff
path: root/src/soc
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc')
-rw-r--r--src/soc/intel/baytrail/southcluster.c34
1 files changed, 12 insertions, 22 deletions
diff --git a/src/soc/intel/baytrail/southcluster.c b/src/soc/intel/baytrail/southcluster.c
index dcc48e9c17..45c588a165 100644
--- a/src/soc/intel/baytrail/southcluster.c
+++ b/src/soc/intel/baytrail/southcluster.c
@@ -28,9 +28,8 @@
#include "chip.h"
#include <acpi/acpigen.h>
-static inline void
-add_mmio_resource(struct device *dev, int i, unsigned long addr,
- unsigned long size)
+static inline void add_mmio_resource(struct device *dev, int i, unsigned long addr,
+ unsigned long size)
{
mmio_resource(dev, i, addr >> 10, size >> 10);
}
@@ -58,8 +57,7 @@ static inline int io_range_in_default(int base, int size)
return 0;
/* Is it entirely contained? */
- if (base >= LPC_DEFAULT_IO_RANGE_LOWER &&
- (base + size) < LPC_DEFAULT_IO_RANGE_UPPER)
+ if (base >= LPC_DEFAULT_IO_RANGE_LOWER && (base + size) < LPC_DEFAULT_IO_RANGE_UPPER)
return 1;
/* This will return not in range for partial overlaps */
@@ -70,8 +68,7 @@ static inline int io_range_in_default(int base, int size)
* Note: this function assumes there is no overlap with the default LPC device's
* claimed range: LPC_DEFAULT_IO_RANGE_LOWER -> LPC_DEFAULT_IO_RANGE_UPPER.
*/
-static void sc_add_io_resource(struct device *dev, int base, int size,
- int index)
+static void sc_add_io_resource(struct device *dev, int base, int size, int index)
{
struct resource *res;
@@ -113,11 +110,6 @@ static void sc_read_resources(struct device *dev)
sc_add_io_resources(dev);
}
-static void sc_rtc_init(void)
-{
- cmos_init(rtc_failure());
-}
-
/*
* The UART hardware loses power while in suspend. Because of this the kernel
* can hang because it doesn't re-initialize serial ports it is using for
@@ -176,15 +168,14 @@ static void sc_init(struct device *dev)
/* Route SCI to IRQ9 */
write32(actl, (read32(actl) & ~SCIS_MASK) | SCIS_IRQ9);
- sc_rtc_init();
+ cmos_init(rtc_failure());
if (config->disable_slp_x_stretch_sus_fail) {
printk(BIOS_DEBUG, "Disabling slp_x stretching.\n");
- write32(gen_pmcon1,
- read32(gen_pmcon1) | DIS_SLP_X_STRCH_SUS_UP);
+ write32(gen_pmcon1, read32(gen_pmcon1) | DIS_SLP_X_STRCH_SUS_UP);
+
} else {
- write32(gen_pmcon1,
- read32(gen_pmcon1) & ~DIS_SLP_X_STRCH_SUS_UP);
+ write32(gen_pmcon1, read32(gen_pmcon1) & ~DIS_SLP_X_STRCH_SUS_UP);
}
if (acpi_is_wakeup_s3())
@@ -200,7 +191,7 @@ static void sc_disable_devfn(struct device *dev)
{
void *func_dis = (void *)(PMC_BASE_ADDRESS + FUNC_DIS);
void *func_dis2 = (void *)(PMC_BASE_ADDRESS + FUNC_DIS2);
- uint32_t mask = 0;
+ uint32_t mask = 0;
uint32_t mask2 = 0;
switch (dev->path.pci.devfn) {
@@ -475,8 +466,7 @@ void southcluster_enable_dev(struct device *dev)
/* Ensure memory, io, and bus master are all disabled */
reg16 = pci_read_config16(dev, PCI_COMMAND);
- reg16 &= ~(PCI_COMMAND_MASTER |
- PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
+ reg16 &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
pci_write_config16(dev, PCI_COMMAND, reg16);
/* Place device in D3Hot */
@@ -522,7 +512,7 @@ static struct device_operations device_ops = {
.read_resources = sc_read_resources,
.set_resources = pci_dev_set_resources,
.acpi_inject_dsdt = southcluster_inject_dsdt,
- .write_acpi_tables = acpi_write_hpet,
+ .write_acpi_tables = acpi_write_hpet,
.init = sc_init,
.enable = southcluster_enable_dev,
.scan_bus = scan_static_bus,
@@ -546,7 +536,7 @@ static void finalize_chipset(void *unused)
void *gcs = (void *)(RCBA_BASE_ADDRESS + GCS);
void *gen_pmcon2 = (void *)(PMC_BASE_ADDRESS + GEN_PMCON2);
void *etr = (void *)(PMC_BASE_ADDRESS + ETR);
- u8 *spi = (u8 *)SPI_BASE_ADDRESS;
+ uint8_t *spi = (uint8_t *)SPI_BASE_ADDRESS;
struct spi_config cfg;
/* Set the lock enable on the BIOS control register */