17 files changed, 48 insertions, 95 deletions

diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig
index 4a841be9ad..7a5a11c840 100644
--- a/src/soc/intel/apollolake/Kconfig
+++ b/src/soc/intel/apollolake/Kconfig
@@ -169,14 +169,6 @@ config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ
 	int
 	default 133
 
-config UART_DEBUG
-	bool "Enable SoC UART debug port selected by UART_FOR_CONSOLE."
-	default n
-	select CONSOLE_SERIAL
-	select DRIVERS_UART
-	select DRIVERS_UART_8250MEM_32
-	select NO_UART_ON_SUPERIO
-
 # 32KiB bootblock is all that is mapped in by the CSE at top of 4GiB.
 config C_ENV_BOOTBLOCK_SIZE
 	hex
diff --git a/src/soc/intel/apollolake/Makefile.inc b/src/soc/intel/apollolake/Makefile.inc
index 19ebe7c55b..822158c3c1 100644
--- a/src/soc/intel/apollolake/Makefile.inc
+++ b/src/soc/intel/apollolake/Makefile.inc
@@ -18,14 +18,14 @@ bootblock-y += lpc.c
 bootblock-y += mmap_boot.c
 bootblock-y += pmutil.c
 bootblock-y += spi.c
-bootblock-$(CONFIG_UART_DEBUG) += uart.c
+bootblock-y += uart.c
 
 romstage-y += car.c
 romstage-$(CONFIG_PLATFORM_USES_FSP2_0) += romstage.c
 romstage-y += gspi.c
 romstage-y += heci.c
 romstage-y += i2c.c
-romstage-$(CONFIG_UART_DEBUG) += uart.c
+romstage-y += uart.c
 romstage-y += memmap.c
 romstage-y += meminit.c
 ifeq ($(CONFIG_SOC_INTEL_GLK),y)
@@ -42,7 +42,7 @@ smm-y += mmap_boot.c
 smm-y += pmutil.c
 smm-y += smihandler.c
 smm-y += spi.c
-smm-$(CONFIG_UART_DEBUG) += uart.c
+smm-y += uart.c
 smm-y += elog.c
 
 ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c
@@ -57,7 +57,7 @@ ramstage-y += i2c.c
 ramstage-y += lpc.c
 ramstage-y += memmap.c
 ramstage-y += mmap_boot.c
-ramstage-$(CONFIG_UART_DEBUG) += uart.c
+ramstage-y += uart.c
 ramstage-y += nhlt.c
 ramstage-y += spi.c
 ramstage-y += systemagent.c
@@ -74,7 +74,7 @@ postcar-y += spi.c
 postcar-y += i2c.c
 postcar-$(CONFIG_RESET_ON_INVALID_RAMSTAGE_CACHE) += heci.c
 postcar-$(CONFIG_RESET_ON_INVALID_RAMSTAGE_CACHE) += reset.c
-postcar-$(CONFIG_UART_DEBUG) += uart.c
+postcar-y += uart.c
 postcar-$(CONFIG_VBOOT_MEASURED_BOOT) += gspi.c
 
 verstage-y += car.c
@@ -83,7 +83,7 @@ verstage-y += gspi.c
 verstage-y += heci.c
 verstage-y += memmap.c
 verstage-y += mmap_boot.c
-verstage-$(CONFIG_UART_DEBUG) += uart.c
+verstage-y += uart.c
 verstage-y += pmutil.c
 verstage-y += reset.c
 verstage-y += spi.c
diff --git a/src/soc/intel/apollolake/bootblock/bootblock.c b/src/soc/intel/apollolake/bootblock/bootblock.c
index ac3e0cc0ea..ce89f133ee 100644
--- a/src/soc/intel/apollolake/bootblock/bootblock.c
+++ b/src/soc/intel/apollolake/bootblock/bootblock.c
@@ -95,7 +95,7 @@ void bootblock_soc_early_init(void)
 	pmc_global_reset_enable(0);
 
 	/* Prepare UART for serial console. */
-	if (IS_ENABLED(CONFIG_UART_DEBUG))
+	if (IS_ENABLED(CONFIG_INTEL_LPSS_UART_FOR_CONSOLE))
 		uart_bootblock_init();
 
 	if (IS_ENABLED(CONFIG_TPM_ON_FAST_SPI))
diff --git a/src/soc/intel/apollolake/cse.c b/src/soc/intel/apollolake/cse.c
index d761a6c6d8..0ff7dcc1ed 100644
--- a/src/soc/intel/apollolake/cse.c
+++ b/src/soc/intel/apollolake/cse.c
@@ -222,7 +222,7 @@ static void dump_cse_version(void *unused)
 	 * Print ME version only if UART debugging is enabled. Else, it takes
 	 * ~0.6 second to talk to ME and get this information.
 	 */
-	if (!IS_ENABLED(CONFIG_UART_DEBUG))
+	if (!IS_ENABLED(CONFIG_CONSOLE_SERIAL))
 		return;
 
 	msg.mkhi_hdr.fields.group_id = MKHI_GROUP_ID_GEN;
diff --git a/src/soc/intel/apollolake/romstage.c b/src/soc/intel/apollolake/romstage.c
index 4f4f9f53c5..9cc516665a 100644
--- a/src/soc/intel/apollolake/romstage.c
+++ b/src/soc/intel/apollolake/romstage.c
@@ -278,7 +278,7 @@ asmlinkage void car_stage_entry(void)
 static void fill_console_params(FSPM_UPD *mupd)
 {
 	if (IS_ENABLED(CONFIG_CONSOLE_SERIAL)) {
-		if (IS_ENABLED(CONFIG_UART_DEBUG)) {
+		if (IS_ENABLED(CONFIG_INTEL_LPSS_UART_FOR_CONSOLE)) {
 			mupd->FspmConfig.SerialDebugPortDevice =
 					CONFIG_UART_FOR_CONSOLE;
 			/* use MMIO port type */
diff --git a/src/soc/intel/cannonlake/Kconfig b/src/soc/intel/cannonlake/Kconfig
index 9e007b656e..f8193cd754 100644
--- a/src/soc/intel/cannonlake/Kconfig
+++ b/src/soc/intel/cannonlake/Kconfig
@@ -77,23 +77,6 @@ config CPU_SPECIFIC_OPTIONS
 	select DISPLAY_FSP_VERSION_INFO
 	select FSP_T_XIP if FSP_CAR
 
-config UART_DEBUG
-	bool "Enable UART debug port."
-	default n
-	select CONSOLE_SERIAL
-	select BOOTBLOCK_CONSOLE
-	select DRIVERS_UART
-	select DRIVERS_UART_8250MEM_32
-	select NO_UART_ON_SUPERIO
-
-config UART_FOR_CONSOLE
-	int "Index for LPSS UART port to use for console"
-	default 2 if DRIVERS_UART_8250MEM_32
-	default 0
-	help
-	    Index for LPSS UART port to use for console:
-	    0 = LPSS UART0, 1 = LPSS UART1, 2 = LPSS UART2
-
 config DCACHE_RAM_BASE
 	default 0xfef00000
 
diff --git a/src/soc/intel/cannonlake/Makefile.inc b/src/soc/intel/cannonlake/Makefile.inc
index faa22f0501..fb2c849abb 100644
--- a/src/soc/intel/cannonlake/Makefile.inc
+++ b/src/soc/intel/cannonlake/Makefile.inc
@@ -19,7 +19,7 @@ bootblock-y += memmap.c
 bootblock-y += spi.c
 bootblock-y += lpc.c
 bootblock-y += p2sb.c
-bootblock-$(CONFIG_UART_DEBUG) += uart.c
+bootblock-y += uart.c
 
 romstage-$(CONFIG_SOC_INTEL_CANNONLAKE_MEMCFG_INIT) += cnl_memcfg_init.c
 romstage-y += gspi.c
@@ -29,7 +29,7 @@ romstage-y += memmap.c
 romstage-y += pmutil.c
 romstage-y += reset.c
 romstage-y += spi.c
-romstage-$(CONFIG_UART_DEBUG) += uart.c
+romstage-y += uart.c
 
 ramstage-y += acpi.c
 ramstage-y += chip.c
@@ -51,27 +51,27 @@ ramstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c
 ramstage-y += smmrelocate.c
 ramstage-y += spi.c
 ramstage-y += systemagent.c
-ramstage-$(CONFIG_UART_DEBUG) += uart.c
+ramstage-y += uart.c
 ramstage-y += vr_config.c
 ramstage-y += sd.c
 
 smm-y += p2sb.c
 smm-y += pmutil.c
 smm-y += smihandler.c
-smm-$(CONFIG_UART_DEBUG) += uart.c
+smm-y += uart.c
 
 postcar-y += memmap.c
 postcar-y += pmutil.c
 postcar-y += i2c.c
 postcar-y += gspi.c
 postcar-y += spi.c
-postcar-$(CONFIG_UART_DEBUG) += uart.c
+postcar-y += uart.c
 
 verstage-y += gspi.c
 verstage-y += i2c.c
 verstage-y += pmutil.c
 verstage-y += spi.c
-verstage-$(CONFIG_UART_DEBUG) += uart.c
+verstage-y += uart.c
 
 ifeq ($(CONFIG_SOC_INTEL_CANNONLAKE_PCH_H),y)
 bootblock-y += gpio_cnp_h.c
diff --git a/src/soc/intel/cannonlake/bootblock/bootblock.c b/src/soc/intel/cannonlake/bootblock/bootblock.c
index b7d00cd063..08a13ea860 100644
--- a/src/soc/intel/cannonlake/bootblock/bootblock.c
+++ b/src/soc/intel/cannonlake/bootblock/bootblock.c
@@ -53,7 +53,7 @@ void bootblock_soc_early_init(void)
 	bootblock_pch_early_init();
 	bootblock_cpu_init();
 	pch_early_iorange_init();
-	if (IS_ENABLED(CONFIG_UART_DEBUG))
+	if (IS_ENABLED(CONFIG_INTEL_LPSS_UART_FOR_CONSOLE))
 		uart_bootblock_init();
 }
 
diff --git a/src/soc/intel/common/block/uart/Kconfig b/src/soc/intel/common/block/uart/Kconfig
index f4a0e4e4b9..e731465b3b 100644
--- a/src/soc/intel/common/block/uart/Kconfig
+++ b/src/soc/intel/common/block/uart/Kconfig
@@ -15,3 +15,14 @@ config SOC_INTEL_COMMON_BLOCK_UART_LPSS_CLK_N_VAL
 	hex
 	help
 	  Clock m-divisor value for m/n divider
+
+config INTEL_LPSS_UART_FOR_CONSOLE
+	bool
+	depends on SOC_INTEL_COMMON_BLOCK_UART
+	select DRIVERS_UART_8250MEM_32
+	select FIXED_UART_FOR_CONSOLE
+	help
+	  Selected by mainboards that use one of the SoC's LPSS UARTS
+	  for the coreboot console.
+	  WARNING: UART_FOR_CONSOLE has to be set to a correct value,
+	           otherwise wrong pad configurations might be selected.
diff --git a/src/soc/intel/common/block/uart/uart.c b/src/soc/intel/common/block/uart/uart.c
index f7235cfe92..f0b6b24b70 100644
--- a/src/soc/intel/common/block/uart/uart.c
+++ b/src/soc/intel/common/block/uart/uart.c
@@ -88,12 +88,11 @@ void uart_common_init(struct device *device, uintptr_t baseaddr)
 struct device *uart_get_device(void)
 {
 	/*
-	 * This function will get called even if UART_DEBUG config options is
-	 * not selected.
-	 * By default returning NULL in case CONFIG_UART_DEBUG option is not
-	 * selected to avoid compilation errors.
+	 * This function will get called even if INTEL_LPSS_UART_FOR_CONSOLE
+	 * config option is not selected.
+	 * By default return NULL in this case to avoid compilation errors.
 	 */
-	if (!IS_ENABLED(CONFIG_UART_DEBUG))
+	if (!IS_ENABLED(CONFIG_INTEL_LPSS_UART_FOR_CONSOLE))
 		return NULL;
 
 	int console_index = uart_get_valid_index();
@@ -157,7 +156,8 @@ static void uart_read_resources(struct device *dev)
 	pci_dev_read_resources(dev);
 
 	/* Set the configured UART base address for the debug port */
-	if (IS_ENABLED(CONFIG_UART_DEBUG) && uart_is_debug_controller(dev)) {
+	if (IS_ENABLED(CONFIG_INTEL_LPSS_UART_FOR_CONSOLE) &&
+	    uart_is_debug_controller(dev)) {
 		struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0);
 		/* Need to set the base and size for the resource allocator. */
 		res->base = UART_BASE(CONFIG_UART_FOR_CONSOLE);
diff --git a/src/soc/intel/icelake/Kconfig b/src/soc/intel/icelake/Kconfig
index 6343ca5d0f..1d687f0224 100644
--- a/src/soc/intel/icelake/Kconfig
+++ b/src/soc/intel/icelake/Kconfig
@@ -62,23 +62,6 @@ config CPU_SPECIFIC_OPTIONS
 	select UDK_2017_BINDING
 	select DISPLAY_FSP_VERSION_INFO
 
-config UART_DEBUG
-	bool "Enable UART debug port."
-	default n
-	select CONSOLE_SERIAL
-	select BOOTBLOCK_CONSOLE
-	select DRIVERS_UART
-	select DRIVERS_UART_8250MEM_32
-	select NO_UART_ON_SUPERIO
-
-config UART_FOR_CONSOLE
-	int "Index for LPSS UART port to use for console"
-	default 2 if DRIVERS_UART_8250MEM_32
-	default 0
-	help
-	    Index for LPSS UART port to use for console:
-	    0 = LPSS UART0, 1 = LPSS UART1, 2 = LPSS UART2
-
 config DCACHE_RAM_BASE
 	default 0xfef00000
 
diff --git a/src/soc/intel/icelake/Makefile.inc b/src/soc/intel/icelake/Makefile.inc
index a81edd46a0..74c9182067 100644
--- a/src/soc/intel/icelake/Makefile.inc
+++ b/src/soc/intel/icelake/Makefile.inc
@@ -20,7 +20,7 @@ bootblock-y += memmap.c
 bootblock-y += spi.c
 bootblock-y += lpc.c
 bootblock-y += p2sb.c
-bootblock-$(CONFIG_UART_DEBUG) += uart.c
+bootblock-y += uart.c
 
 romstage-y += gpio.c
 romstage-y += gspi.c
@@ -30,7 +30,7 @@ romstage-y += memmap.c
 romstage-y += pmutil.c
 romstage-y += reset.c
 romstage-y += spi.c
-romstage-$(CONFIG_UART_DEBUG) += uart.c
+romstage-y += uart.c
 
 ramstage-y += acpi.c
 ramstage-y += chip.c
@@ -52,27 +52,27 @@ ramstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c
 ramstage-y += smmrelocate.c
 ramstage-y += spi.c
 ramstage-y += systemagent.c
-ramstage-$(CONFIG_UART_DEBUG) += uart.c
+ramstage-y += uart.c
 ramstage-y += sd.c
 
 smm-y += gpio.c
 smm-y += p2sb.c
 smm-y += pmutil.c
 smm-y += smihandler.c
-smm-$(CONFIG_UART_DEBUG) += uart.c
+smm-y += uart.c
 
 postcar-y += memmap.c
 postcar-y += pmutil.c
 postcar-y += i2c.c
 postcar-y += gspi.c
 postcar-y += spi.c
-postcar-$(CONFIG_UART_DEBUG) += uart.c
+postcar-y += uart.c
 
 verstage-y += gspi.c
 verstage-y += i2c.c
 verstage-y += pmutil.c
 verstage-y += spi.c
-verstage-$(CONFIG_UART_DEBUG) += uart.c
+verstage-y += uart.c
 
 CPPFLAGS_common += -I$(src)/soc/intel/icelake
 CPPFLAGS_common += -I$(src)/soc/intel/icelake/include
diff --git a/src/soc/intel/icelake/bootblock/bootblock.c b/src/soc/intel/icelake/bootblock/bootblock.c
index 40c2d41b7a..d26fa4210d 100644
--- a/src/soc/intel/icelake/bootblock/bootblock.c
+++ b/src/soc/intel/icelake/bootblock/bootblock.c
@@ -32,7 +32,7 @@ void bootblock_soc_early_init(void)
 	bootblock_pch_early_init();
 	bootblock_cpu_init();
 	pch_early_iorange_init();
-	if (IS_ENABLED(CONFIG_UART_DEBUG))
+	if (IS_ENABLED(CONFIG_INTEL_LPSS_UART_FOR_CONSOLE))
 		uart_bootblock_init();
 }
 
diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
index c2aecfd5e4..7dcf8a997d 100644
--- a/src/soc/intel/skylake/Kconfig
+++ b/src/soc/intel/skylake/Kconfig
@@ -182,22 +182,6 @@ config VGA_BIOS_ID
 	string
 	default "8086,0406"
 
-config UART_DEBUG
-	bool "Enable UART debug port."
-	default n
-	select CONSOLE_SERIAL
-	select DRIVERS_UART
-	select DRIVERS_UART_8250MEM_32
-	select NO_UART_ON_SUPERIO
-
-config UART_FOR_CONSOLE
-	int "Index for LPSS UART port to use for console"
-	default 2 if DRIVERS_UART_8250MEM
-	default 0
-	help
-	    Index for LPSS UART port to use for console:
-	    0 = LPSS UART0, 1 = LPSS UART1, 2 = LPSS UART2
-
 config SKYLAKE_SOC_PCH_H
 	bool
 	default n
diff --git a/src/soc/intel/skylake/Makefile.inc b/src/soc/intel/skylake/Makefile.inc
index 480c71ecfb..ee2c928464 100644
--- a/src/soc/intel/skylake/Makefile.inc
+++ b/src/soc/intel/skylake/Makefile.inc
@@ -22,13 +22,13 @@ bootblock-y += p2sb.c
 bootblock-y += pmutil.c
 bootblock-y += spi.c
 bootblock-y += lpc.c
-bootblock-$(CONFIG_UART_DEBUG) += uart.c
+bootblock-y += uart.c
 
 verstage-y += gspi.c
 verstage-y += pmutil.c
 verstage-y += i2c.c
 verstage-y += spi.c
-verstage-$(CONFIG_UART_DEBUG) += uart.c
+verstage-y += uart.c
 
 romstage-y += gpio.c
 romstage-y += gspi.c
@@ -40,7 +40,7 @@ romstage-y += pmc.c
 romstage-y += pmutil.c
 romstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c
 romstage-y += spi.c
-romstage-$(CONFIG_UART_DEBUG) += uart.c
+romstage-y += uart.c
 
 ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c
 ramstage-$(CONFIG_PLATFORM_USES_FSP1_1) += chip.c
@@ -67,7 +67,7 @@ ramstage-y += smmrelocate.c
 ramstage-y += spi.c
 ramstage-y += systemagent.c
 ramstage-y += thermal.c
-ramstage-$(CONFIG_UART_DEBUG) += uart.c
+ramstage-y += uart.c
 ramstage-y += vr_config.c
 
 smm-y += elog.c
@@ -75,13 +75,13 @@ smm-y += gpio.c
 smm-y += p2sb.c
 smm-y += pmutil.c
 smm-y += smihandler.c
-smm-$(CONFIG_UART_DEBUG) += uart.c
+smm-y += uart.c
 
 postcar-y += memmap.c
 postcar-y += gspi.c
 postcar-y += spi.c
 postcar-y += i2c.c
-postcar-$(CONFIG_UART_DEBUG) += uart.c
+postcar-y += uart.c
 
 
 # Skylake D0
diff --git a/src/soc/intel/skylake/bootblock/bootblock.c b/src/soc/intel/skylake/bootblock/bootblock.c
index a2bcaaf9af..acf25ffd48 100644
--- a/src/soc/intel/skylake/bootblock/bootblock.c
+++ b/src/soc/intel/skylake/bootblock/bootblock.c
@@ -32,7 +32,7 @@ void bootblock_soc_early_init(void)
 	bootblock_cpu_init();
 	pch_early_iorange_init();
 
-	if (IS_ENABLED(CONFIG_UART_DEBUG))
+	if (IS_ENABLED(CONFIG_INTEL_LPSS_UART_FOR_CONSOLE))
 		uart_bootblock_init();
 }
 
diff --git a/src/soc/intel/skylake/me.c b/src/soc/intel/skylake/me.c
index 64a94ab0f7..f67086b22e 100644
--- a/src/soc/intel/skylake/me.c
+++ b/src/soc/intel/skylake/me.c
@@ -239,7 +239,7 @@ static void print_me_version(void *unused)
 	 * Print ME version only if UART debugging is enabled. Else, it takes ~1
 	 * second to talk to ME and get this information.
 	 */
-	if (!IS_ENABLED(CONFIG_UART_DEBUG))
+	if (!IS_ENABLED(CONFIG_CONSOLE_SERIAL))
 		return;
 
 	hfs.data = me_read_config32(PCI_ME_HFSTS1);