summaryrefslogtreecommitdiff
path: root/src/soc
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc')
-rw-r--r--src/soc/intel/common/block/include/intelblocks/gpio_defs.h241
1 files changed, 125 insertions, 116 deletions
diff --git a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h
index 1ff0b2c29d..e9abd0018c 100644
--- a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h
+++ b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h
@@ -133,7 +133,7 @@
#define PAD_CFG0_BUF_NO_DISABLE (0)
#define PAD_CFG0_BUF_TX_DISABLE PAD_CFG0_TX_DISABLE
#define PAD_CFG0_BUF_RX_DISABLE PAD_CFG0_RX_DISABLE
-#define PAD_CFG0_BUF_TX_RX_DISABLE \
+#define PAD_CFG0_BUF_TX_RX_DISABLE \
(PAD_CFG0_TX_DISABLE | PAD_CFG0_RX_DISABLE)
#define PAD_BUF(value) PAD_CFG0_BUF_##value
@@ -146,17 +146,17 @@
#define PAD_IOSTERM(value) 0
#endif
-#define PAD_IRQ_CFG(route, trig, inv) \
- (PAD_IRQ_ROUTE(route) | \
- PAD_TRIG(trig) | \
- PAD_RX_POL(inv))
+#define PAD_IRQ_CFG(route, trig, inv) \
+ (PAD_IRQ_ROUTE(route) | \
+ PAD_TRIG(trig) | \
+ PAD_RX_POL(inv))
#if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT)
-#define PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv) \
- (PAD_IRQ_ROUTE(route1) | \
- PAD_IRQ_ROUTE(route2) | \
- PAD_TRIG(trig) | \
- PAD_RX_POL(inv))
+#define PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv) \
+ (PAD_IRQ_ROUTE(route1) | \
+ PAD_IRQ_ROUTE(route2) | \
+ PAD_TRIG(trig) | \
+ PAD_RX_POL(inv))
#endif /* CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT */
#define _PAD_CFG_STRUCT(__pad, __config0, __config1) \
@@ -180,121 +180,130 @@
#endif
/* Native function configuration */
-#define PAD_CFG_NF(pad, pull, rst, func) \
- _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
- PAD_IOSSTATE(TxLASTRxE))
+#define PAD_CFG_NF(pad, pull, rst, func) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_RESET(rst) | PAD_FUNC(func), \
+ PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE))
/*
* Set native function with RX Level/Edge configuration and disable
* input/output buffer if necessary
*/
-#define PAD_CFG_NF_BUF_TRIG(pad, pull, rst, func, bufdis, trig) \
- _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_TRIG(trig) | \
- PAD_BUF(bufdis) | PAD_FUNC(func), \
+#define PAD_CFG_NF_BUF_TRIG(pad, pull, rst, func, bufdis, trig) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_RESET(rst) | PAD_TRIG(trig) | \
+ PAD_BUF(bufdis) | PAD_FUNC(func), \
PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE))
#if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL)
/* Native 1.8V tolerant pad, only applies to some pads like I2C/I2S
Not applicable to all SOCs. Refer EDS
*/
-#define PAD_CFG_NF_1V8(pad, pull, rst, func) \
- _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) |\
- PAD_IOSSTATE(TxLASTRxE) | PAD_CFG1_TOL_1V8)
+#define PAD_CFG_NF_1V8(pad, pull, rst, func) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_RESET(rst) | PAD_FUNC(func), \
+ PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE) | PAD_CFG1_TOL_1V8)
#endif
/* Native function configuration for standby state */
-#define PAD_CFG_NF_IOSSTATE(pad, pull, rst, func, iosstate) \
- _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
- PAD_IOSSTATE(iosstate))
+#define PAD_CFG_NF_IOSSTATE(pad, pull, rst, func, iosstate) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_RESET(rst) | PAD_FUNC(func), \
+ PAD_PULL(pull) | PAD_IOSSTATE(iosstate))
/* Native function configuration for standby state, also configuring
iostandby as masked */
-#define PAD_CFG_NF_IOSTANDBY_IGNORE(pad, pull, rst, func) \
- _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
- PAD_IOSSTATE(IGNORE))
+#define PAD_CFG_NF_IOSTANDBY_IGNORE(pad, pull, rst, func) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_RESET(rst) | PAD_FUNC(func), \
+ PAD_PULL(pull) | PAD_IOSSTATE(IGNORE))
/* Native function configuration for standby state, also configuring
iosstate and iosterm */
-#define PAD_CFG_NF_IOSSTATE_IOSTERM(pad, pull, rst, func, iosstate, iosterm) \
- _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+#define PAD_CFG_NF_IOSSTATE_IOSTERM(pad, pull, rst, func, iosstate, iosterm) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
/* Configure native function, iosstate, iosterm and disable input/output buffer */
#define PAD_CFG_NF_BUF_IOSSTATE_IOSTERM(pad, pull, rst, func, bufdis, iosstate, iosterm) \
- _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_BUF(bufdis) | PAD_FUNC(func), \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_RESET(rst) | PAD_BUF(bufdis) | PAD_FUNC(func), \
PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
/* General purpose output, no pullup/down. */
-#define PAD_CFG_GPO(pad, val, rst) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | \
- PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \
+#define PAD_CFG_GPO(pad, val, rst) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | \
+ PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \
PAD_PULL(NONE) | PAD_IOSSTATE(TxLASTRxE))
/* General purpose output, with termination specified */
-#define PAD_CFG_TERM_GPO(pad, val, pull, rst) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | \
- PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \
+#define PAD_CFG_TERM_GPO(pad, val, pull, rst) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | \
+ PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \
PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE))
/* General purpose output, no pullup/down. */
-#define PAD_CFG_GPO_GPIO_DRIVER(pad, val, rst, pull) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | \
- PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \
- PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE) | PAD_CFG_OWN_GPIO(DRIVER))
+#define PAD_CFG_GPO_GPIO_DRIVER(pad, val, rst, pull) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | \
+ PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \
+ PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE) | \
+ PAD_CFG_OWN_GPIO(DRIVER))
/* General purpose output. */
#define PAD_CFG_GPO_IOSSTATE_IOSTERM(pad, val, rst, pull, iosstate, ioterm) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | \
- PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | \
+ PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \
PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(ioterm))
/* General purpose input */
-#define PAD_CFG_GPI(pad, pull, rst) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE), \
+#define PAD_CFG_GPI(pad, pull, rst) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE), \
PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE))
-#define PAD_CFG_GPI_IOSSTATE(pad, pull, rst, iosstate) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \
+#define PAD_CFG_GPI_IOSSTATE(pad, pull, rst, iosstate) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \
PAD_PULL(pull) | PAD_IOSSTATE(iosstate))
-#define PAD_CFG_GPI_IOSSTATE_IOSTERM(pad, pull, rst, iosstate, iosterm) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \
+#define PAD_CFG_GPI_IOSSTATE_IOSTERM(pad, pull, rst, iosstate, iosterm) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \
PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
/*
* General purpose input. The following macro sets the
* Host Software Pad Ownership to GPIO Driver mode.
*/
-#define PAD_CFG_GPI_TRIG_OWN(pad, pull, rst, trig, own) \
- _PAD_CFG_STRUCT(pad, PAD_FUNC(GPIO) | PAD_RESET(rst) | \
- PAD_TRIG(trig) | PAD_RX_POL(NONE) | PAD_BUF(TX_DISABLE), \
+#define PAD_CFG_GPI_TRIG_OWN(pad, pull, rst, trig, own) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | \
+ PAD_TRIG(trig) | PAD_RX_POL(NONE) | PAD_BUF(TX_DISABLE), \
PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE) | PAD_CFG_OWN_GPIO(own))
-#define PAD_CFG_GPI_GPIO_DRIVER(pad, pull, rst) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE), \
+#define PAD_CFG_GPI_GPIO_DRIVER(pad, pull, rst) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE), \
PAD_PULL(pull) | PAD_CFG_OWN_GPIO(DRIVER) | PAD_IOSSTATE(TxDRxE))
-#define PAD_CFG_GPIO_DRIVER_HI_Z(pad, pull, rst, iosstate, iosterm) \
- _PAD_CFG_STRUCT(pad, \
+#define PAD_CFG_GPIO_DRIVER_HI_Z(pad, pull, rst, iosstate, iosterm) \
+ _PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_RX_DISABLE), \
PAD_PULL(pull) | PAD_CFG_OWN_GPIO(DRIVER) | \
PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
-#define PAD_CFG_GPIO_HI_Z(pad, pull, rst, iosstate, iosterm) \
- _PAD_CFG_STRUCT(pad, \
+#define PAD_CFG_GPIO_HI_Z(pad, pull, rst, iosstate, iosterm) \
+ _PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_RX_DISABLE), \
PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
/* GPIO Interrupt */
-#define PAD_CFG_GPI_INT(pad, pull, rst, trig) \
+#define PAD_CFG_GPI_INT(pad, pull, rst, trig) \
PAD_CFG_GPI_TRIG_OWN(pad, pull, rst, trig, DRIVER)
/*
@@ -302,22 +311,22 @@
* Both TX and RX are disabled. RX disabling is done to avoid unnecessary
* setting of GPI_STS. RX Level/Edge Trig Configuration set to disable
*/
-#define PAD_NC(pad, pull) \
+#define PAD_NC(pad, pull) \
_PAD_CFG_STRUCT(pad, \
PAD_FUNC(GPIO) | PAD_RESET(DEEP) | \
- PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), \
+ PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), \
PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE))
#if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_LEGACY_MACROS)
-#define PAD_CFG_GPI_APIC(pad, pull, rst) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
+#define PAD_CFG_GPI_APIC(pad, pull, rst) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
PAD_IRQ_CFG(IOAPIC, LEVEL, NONE), PAD_PULL(pull))
-#define PAD_CFG_GPI_APIC_INVERT(pad, pull, rst) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
+#define PAD_CFG_GPI_APIC_INVERT(pad, pull, rst) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
PAD_IRQ_CFG(IOAPIC, LEVEL, INVERT), PAD_PULL(pull))
#define PAD_CFG_GPI_ACPI_SCI(pad, pull, rst, inv) \
@@ -336,18 +345,18 @@
#else
/* General purpose input, routed to APIC */
-#define PAD_CFG_GPI_APIC(pad, pull, rst, trig, inv) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
- PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \
+#define PAD_CFG_GPI_APIC(pad, pull, rst, trig, inv) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
+ PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(TxDRxE))
#endif
/* General purpose input, routed to APIC - with IOStandby Config*/
-#define PAD_CFG_GPI_APIC_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
- PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \
+#define PAD_CFG_GPI_APIC_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
+ PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
/*
@@ -355,47 +364,47 @@
* on its own end. One just needs to pass an active high message into the
* ITSS.
*/
-#define PAD_CFG_GPI_APIC_LOW(pad, pull, rst) \
+#define PAD_CFG_GPI_APIC_LOW(pad, pull, rst) \
PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, INVERT)
-#define PAD_CFG_GPI_APIC_HIGH(pad, pull, rst) \
+#define PAD_CFG_GPI_APIC_HIGH(pad, pull, rst) \
PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, NONE)
-#define PAD_CFG_GPI_APIC_EDGE_LOW(pad, pull, rst) \
+#define PAD_CFG_GPI_APIC_EDGE_LOW(pad, pull, rst) \
PAD_CFG_GPI_APIC(pad, pull, rst, EDGE_SINGLE, INVERT)
/* General purpose input, routed to SMI */
-#define PAD_CFG_GPI_SMI(pad, pull, rst, trig, inv) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
- PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \
+#define PAD_CFG_GPI_SMI(pad, pull, rst, trig, inv) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
+ PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(TxDRxE))
/* General purpose input, routed to SMI */
-#define PAD_CFG_GPI_SMI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
- PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \
+#define PAD_CFG_GPI_SMI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
+ PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
-#define PAD_CFG_GPI_SMI_LOW(pad, pull, rst, trig) \
+#define PAD_CFG_GPI_SMI_LOW(pad, pull, rst, trig) \
PAD_CFG_GPI_SMI(pad, pull, rst, trig, INVERT)
-#define PAD_CFG_GPI_SMI_HIGH(pad, pull, rst, trig) \
+#define PAD_CFG_GPI_SMI_HIGH(pad, pull, rst, trig) \
PAD_CFG_GPI_SMI(pad, pull, rst, trig, NONE)
/* General purpose input, routed to SCI */
-#define PAD_CFG_GPI_SCI(pad, pull, rst, trig, inv) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
- PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
+#define PAD_CFG_GPI_SCI(pad, pull, rst, trig, inv) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
+ PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(TxDRxE))
/* General purpose input, routed to SCI */
-#define PAD_CFG_GPI_SCI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
- PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
+#define PAD_CFG_GPI_SCI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
+ PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
#define PAD_CFG_GPI_SCI_LOW(pad, pull, rst, trig) \
@@ -404,33 +413,33 @@
#define PAD_CFG_GPI_SCI_HIGH(pad, pull, rst, trig) \
PAD_CFG_GPI_SCI(pad, pull, rst, trig, NONE)
-#define PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, inv, dur) \
- _PAD_CFG_STRUCT_3(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
- PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
+#define PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, inv, dur) \
+ _PAD_CFG_STRUCT_3(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
+ PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(TxDRxE), PAD_CFG2_DEBEN | PAD_CFG2_##dur)
-#define PAD_CFG_GPI_SCI_LOW_DEBEN(pad, pull, rst, trig, dur) \
+#define PAD_CFG_GPI_SCI_LOW_DEBEN(pad, pull, rst, trig, dur) \
PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, INVERT, dur)
-#define PAD_CFG_GPI_SCI_HIGH_DEBEN(pad, pull, rst, trig, dur) \
+#define PAD_CFG_GPI_SCI_HIGH_DEBEN(pad, pull, rst, trig, dur) \
PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, NONE, dur)
/* General purpose input, routed to NMI */
-#define PAD_CFG_GPI_NMI(pad, pull, rst, trig, inv) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
- PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull) | \
+#define PAD_CFG_GPI_NMI(pad, pull, rst, trig, inv) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
+ PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(TxDRxE))
#if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT)
-#define PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, route1, route2) \
- _PAD_CFG_STRUCT(pad, \
- PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
- PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv), \
+#define PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, route1, route2) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \
+ PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv), \
PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE))
-#define PAD_CFG_GPI_IRQ_WAKE(pad, pull, rst, trig, inv) \
+#define PAD_CFG_GPI_IRQ_WAKE(pad, pull, rst, trig, inv) \
PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, IOAPIC, SCI)
#endif /* CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT */