summaryrefslogtreecommitdiff
path: root/src/soc
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc')
-rw-r--r--src/soc/intel/baytrail/baytrail/gpio.h113
1 files changed, 86 insertions, 27 deletions
diff --git a/src/soc/intel/baytrail/baytrail/gpio.h b/src/soc/intel/baytrail/baytrail/gpio.h
index 32b991edd9..aae41a4bce 100644
--- a/src/soc/intel/baytrail/baytrail/gpio.h
+++ b/src/soc/intel/baytrail/baytrail/gpio.h
@@ -27,9 +27,9 @@
/* #define GPIO_DEBUG */
/* Pad base, ex. PAD_CONF0[n]= PAD_BASE+16*n */
-#define GPSCORE_PAD_BASE IO_BASE_ADDRESS + 0x0000
-#define GPNCORE_PAD_BASE IO_BASE_ADDRESS + 0x1000
-#define GPSSUS_PAD_BASE IO_BASE_ADDRESS + 0x2000
+#define GPSCORE_PAD_BASE (IO_BASE_ADDRESS + 0x0000)
+#define GPNCORE_PAD_BASE (IO_BASE_ADDRESS + 0x1000)
+#define GPSSUS_PAD_BASE (IO_BASE_ADDRESS + 0x2000)
/* Pad register offset */
#define PAD_CONF0_REG 0x0
@@ -37,8 +37,8 @@
#define PAD_VAL_REG 0x8
/* Legacy IO register base */
-#define GPSCORE_LEGACY_BASE GPIO_BASE_ADDRESS + 0x00
-#define GPSSUS_LEGACY_BASE GPIO_BASE_ADDRESS + 0x80
+#define GPSCORE_LEGACY_BASE (GPIO_BASE_ADDRESS + 0x00)
+#define GPSSUS_LEGACY_BASE (GPIO_BASE_ADDRESS + 0x80)
/* Some banks have no legacy GPIO interface */
#define GP_LEGACY_BASE_NONE 0xFFFF
@@ -71,19 +71,45 @@
#define GPIO_NEDGE_DISABLE 0
#define GPIO_NEDGE_ENABLE 1
-/* PAD_CONF0 settings */
+/* config0[29] - Disable second mask */
+#define PAD_MASK2_DISABLE (1 << 29)
+
+/* config0[27] - Direct Irq En */
#define PAD_IRQ_EN (1 << 27)
+
+/* config0[24] - Gd Level */
#define PAD_LEVEL_IRQ (1 << 24)
+#define PAD_EDGE_IRQ (0 << 24)
+
+/* config0[17] - Slow clkgate / glitch filter */
+#define PAD_SLOWGF_ENABLE (1 << 17)
+
+/* config0[16] - Fast clkgate / glitch filter */
+#define PAD_FASTGF_ENABLE (1 << 16)
+/* config0[15] - Hysteresis enable (inverted) */
+#define PAD_HYST_DISABLE (1 << 15)
+#define PAD_HYST_ENABLE (0 << 15)
+
+/* config0[14:13] - Hysteresis control */
+#define PAD_HYST_CTRL_DEFAULT (2 << 13)
+
+/* config0[11] - Bypass Flop */
+#define PAD_FLOP_BYPASS (1 << 11)
+#define PAD_FLOP_ENABLE (0 << 11)
+
+/* config0[10:9] - Pull str */
#define PAD_PU_2K (0 << 9)
#define PAD_PU_10K (1 << 9)
#define PAD_PU_20K (2 << 9)
#define PAD_PU_40K (3 << 9)
+/* config0[8:7] - Pull assign */
#define PAD_PU_DISABLE (0 << 7)
#define PAD_PU_UP (1 << 7)
#define PAD_PU_DOWN (2 << 7)
+/* config0[2:0] - Func. pin mux */
#define PAD_FUNC0 0x0
#define PAD_FUNC1 0x1
#define PAD_FUNC2 0x2
@@ -92,68 +118,101 @@
#define PAD_FUNC5 0x5
#define PAD_FUNC6 0x6
-/* PAD_VAL settings */
-#define PAD_INPUT_ENABLE (1 << 2)
-#define PAD_OUTPUT_ENABLE (1 << 1)
+/* pad config0 power-on values - We will not often want to change these */
+#define PAD_CONFIG0_DEFAULT (PAD_MASK2_DISABLE | PAD_SLOWGF_ENABLE | \
+ PAD_FASTGF_ENABLE | PAD_HYST_DISABLE | \
+ PAD_HYST_CTRL_DEFAULT | PAD_FLOP_BYPASS)
-/* End marker */
-#define GPIO_LIST_END 0xffffffff
+/* pad config1 reg power-on values - Shouldn't need to change this */
+#define PAD_CONFIG1_DEFAULT 0x8000
+
+/* pad_val[2] - Iinenb - active low */
+#define PAD_VAL_INPUT_DISABLE (1 << 2)
+#define PAD_VAL_INPUT_ENABLE (0 << 2)
+
+/* pad_val[1] - Ioutenb - active low */
+#define PAD_VAL_OUTPUT_DISABLE (1 << 1)
+#define PAD_VAL_OUTPUT_ENABLE (0 << 1)
+
+/* pad_val reg power-on default varies by pad, and apparently can cause issues
+ * if not set correctly, even if the pin isn't configured as GPIO. */
+#define PAD_VAL_DEFAULT (PAD_VAL_INPUT_ENABLE | PAD_VAL_OUTPUT_DISABLE)
#define GPIO_INPUT_PU_10K \
- { .pad_conf0 = PAD_PU_10K | PAD_PU_UP, \
- .pad_val = PAD_INPUT_ENABLE, \
+ { .pad_conf0 = PAD_PU_10K | PAD_PU_UP | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_INPUT_ENABLE, \
.use_sel = GPIO_USE_LEGACY, \
.io_sel = GPIO_DIR_INPUT }
#define GPIO_OUT_LOW \
- { .pad_conf0 = PAD_PU_DISABLE, \
- .pad_val = PAD_OUTPUT_ENABLE, \
+ { .pad_conf0 = PAD_PU_DISABLE | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_OUTPUT_ENABLE, \
.use_sel = GPIO_USE_LEGACY, \
.io_sel = GPIO_DIR_OUTPUT, \
.gp_lvl = GPIO_LEVEL_LOW }
#define GPIO_OUT_HIGH \
- { .pad_conf0 = PAD_PU_DISABLE, \
- .pad_val = PAD_OUTPUT_ENABLE, \
+ { .pad_conf0 = PAD_PU_DISABLE | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_OUTPUT_ENABLE, \
.use_sel = GPIO_USE_LEGACY, \
.io_sel = GPIO_DIR_OUTPUT, \
.gp_lvl = GPIO_LEVEL_HIGH }
#define GPIO_FUNC0 \
{ .use_sel = GPIO_USE_PAD, \
- .pad_conf0 = PAD_FUNC0 }
+ .pad_conf0 = PAD_FUNC0 | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_DEFAULT }
#define GPIO_FUNC1 \
{ .use_sel = GPIO_USE_PAD, \
- .pad_conf0 = PAD_FUNC1 }
+ .pad_conf0 = PAD_FUNC1 | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_DEFAULT }
#define GPIO_FUNC2 \
{ .use_sel = GPIO_USE_PAD, \
- .pad_conf0 = PAD_FUNC2 }
+ .pad_conf0 = PAD_FUNC2 | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_DEFAULT }
#define GPIO_FUNC3 \
{ .use_sel = GPIO_USE_PAD, \
- .pad_conf0 = PAD_FUNC3 }
+ .pad_conf0 = PAD_FUNC3 | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_DEFAULT }
#define GPIO_FUNC4 \
{ .use_sel = GPIO_USE_PAD, \
- .pad_conf0 = PAD_FUNC4 }
+ .pad_conf0 = PAD_FUNC4 | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_DEFAULT }
#define GPIO_FUNC5 \
{ .use_sel = GPIO_USE_PAD, \
- .pad_conf0 = PAD_FUNC5 }
+ .pad_conf0 = PAD_FUNC5 | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_DEFAULT }
#define GPIO_FUNC6 \
{ .use_sel = GPIO_USE_PAD, \
- .pad_conf0 = PAD_FUNC6 }
+ .pad_conf0 = PAD_FUNC6 | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_DEFAULT }
+
+/* End marker */
+#define GPIO_LIST_END 0xffffffff
#define GPIO_END \
{ .pad_conf0 = GPIO_LIST_END }
/* Common default GPIO settings */
-#define GPIO_INPUT GPIO_INPUT_PU_10K
-#define GPIO_UNUSED GPIO_INPUT_PU_10K
-#define GPIO_DEFAULT GPIO_FUNC0
+#define GPIO_INPUT GPIO_INPUT_PU_10K
+#define GPIO_UNUSED GPIO_INPUT_PU_10K
+#define GPIO_DEFAULT GPIO_FUNC0
struct soc_gpio_map {
u32 pad_conf0;