diff options
Diffstat (limited to 'src/soc/intel')
| -rw-r--r-- | src/soc/intel/apollolake/Makefile.inc | 1 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/include/soc/fsp/FspUpd.h | 48 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h | 721 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h | 1541 |
4 files changed, 1 insertions, 2310 deletions
diff --git a/src/soc/intel/apollolake/Makefile.inc b/src/soc/intel/apollolake/Makefile.inc index 1f3c276c3a..3c45cbe026 100644 --- a/src/soc/intel/apollolake/Makefile.inc +++ b/src/soc/intel/apollolake/Makefile.inc @@ -93,6 +93,7 @@ verstage-y += reset.c verstage-y += spi.c CPPFLAGS_common += -I$(src)/soc/intel/apollolake/include +CPPFLAGS_common += -I$(src)/vendorcode/intel/fsp/fsp2_0/apollolake # Since FSP-M runs in CAR we need to relocate it to a specific address $(CONFIG_FSP_M_CBFS)-options := -b $(CONFIG_FSP_M_ADDR) diff --git a/src/soc/intel/apollolake/include/soc/fsp/FspUpd.h b/src/soc/intel/apollolake/include/soc/fsp/FspUpd.h deleted file mode 100644 index a7114ce39e..0000000000 --- a/src/soc/intel/apollolake/include/soc/fsp/FspUpd.h +++ /dev/null @@ -1,48 +0,0 @@ -/** @file - -Copyright (c) 2016, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPUPD_H__ -#define __FSPUPD_H__ - -#include <FspEas.h> - -#pragma pack(push, 1) - -#define FSPT_UPD_SIGNATURE 0x545F4450554C5041 /* 'APLUPD_T' */ - -#define FSPM_UPD_SIGNATURE 0x4D5F4450554C5041 /* 'APLUPD_M' */ - -#define FSPS_UPD_SIGNATURE 0x535F4450554C5041 /* 'APLUPD_S' */ - -#pragma pack(pop) - -#endif diff --git a/src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h b/src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h deleted file mode 100644 index 48225e0779..0000000000 --- a/src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h +++ /dev/null @@ -1,721 +0,0 @@ -/** @file - -Copyright (c) 2016, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPMUPD_H__ -#define __FSPMUPD_H__ - -#include <FspUpd.h> - -#pragma pack(push, 1) - - -#define MAX_CHANNELS_NUM 4 -#define MAX_DIMMS_NUM 1 - -typedef struct { - UINT8 DimmId; - UINT32 SizeInMb; - UINT16 MfgId; - /** Module part number for DRR3 is 18 bytes - but DRR4 is 20 bytes as per JEDEC Spec, so - reserving 20 bytes **/ - UINT8 ModulePartNum[20]; -} DIMM_INFO; - -typedef struct { - UINT8 ChannelId; - UINT8 DimmCount; - DIMM_INFO DimmInfo[MAX_DIMMS_NUM]; -} CHANNEL_INFO; - -typedef struct { - UINT8 Revision; - UINT8 DataWidth; - /** As defined in SMBIOS 3.0 spec - Section 7.18.2 and Table 75 - **/ - UINT16 MemoryType; - UINT16 MemoryFrequencyInMHz; - /** As defined in SMBIOS 3.0 spec - Section 7.17.3 and Table 72 - **/ - UINT8 ErrorCorrectionType; - UINT8 ChannelCount; - CHANNEL_INFO ChannelInfo[MAX_CHANNELS_NUM]; -} FSP_SMBIOS_MEMORY_INFO; - - -/** Fsp M Configuration -**/ -typedef struct { - -/** Offset 0x0040 - Debug Serial Port Base address - Debug serial port base address. This option will be used only when the 'Serial Port - Debug Device' option is set to 'External Device'. 0x00000000(Default). -**/ - UINT32 SerialDebugPortAddress; - -/** Offset 0x0044 - Debug Serial Port Type - 16550 compatible debug serial port resource type. NONE means no serial port support. - 0x02:MMIO(Default). - 0:NONE, 1:I/O, 2:MMIO -**/ - UINT8 SerialDebugPortType; - -/** Offset 0x0045 - Serial Port Debug Device - Select active serial port device for debug. For SOC UART devices,'Debug Serial Port - Base' options will be ignored. 0x02:SOC UART2(Default). - 0:SOC UART0, 1:SOC UART1, 2:SOC UART2, 3:External Device -**/ - UINT8 SerialDebugPortDevice; - -/** Offset 0x0046 - Debug Serial Port Stride Size - Debug serial port register map stride size in bytes. 0x00:1, 0x02:4(Default). - 0:1, 2:4 -**/ - UINT8 SerialDebugPortStrideSize; - -/** Offset 0x0047 - Memory Fast Boot - Enable/Disable MRC fast boot support. 0x00:Disable, 0x01:Enable(Default). - $EN_DIS -**/ - UINT8 MrcFastBoot; - -/** Offset 0x0048 - Integrated Graphics Device - Enable : Enable Integrated Graphics Device (IGD) when selected as the Primary Video - Adaptor. Disable: Always disable IGD. 0x00:Disable, 0x01:Enable(Default). - $EN_DIS -**/ - UINT8 Igd; - -/** Offset 0x0049 - DVMT Pre-Allocated - Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal - Graphics Device. 0x02:64 MB(Default). - 0x02:64 MB, 0x03:96 MB, 0x04:128 MB, 0x05:160 MB, 0x06:192 MB, 0x07:224 MB, 0x08:256 - MB, 0x09:288 MB, 0x0A:320 MB, 0x0B:352 MB, 0x0C:384 MB, 0x0D:416 MB, 0x0E:448 MB, - 0x0F:480 MB, 0x10:512 MB -**/ - UINT8 IgdDvmt50PreAlloc; - -/** Offset 0x004A - Aperture Size - Select the Aperture Size used by the Internal Graphics Device. 0x1:128 MB(Default), - 0x2:256 MB, 0x3:512 MB. - 0x1:128 MB, 0x2:256 MB, 0x3:512 MB -**/ - UINT8 IgdApertureSize; - -/** Offset 0x004B - GTT Size - Select the GTT Size used by the Internal Graphics Device. 0x1:2 MB, 0x2:4 MB, 0x3:8 - MB(Default). - 0x1:2 MB, 0x2:4 MB, 0x3:8 MB -**/ - UINT8 GttSize; - -/** Offset 0x004C - Primary Display - Select which of IGD/PCI Graphics device should be Primary Display. 0x0:AUTO(Default), - 0x2:IGD, 0x3:PCI - 0x0:AUTO, 0x2:IGD, 0x3:PCI -**/ - UINT8 PrimaryVideoAdaptor; - -/** Offset 0x004D - Package - NOTE: First option is CoPOP if LPDDR3/LPDDR4 is being used. It is SODIMM if DDR3L - is being used. 0x00(Default). - 0x0:CoPop, 0x1:BGA, 0x2:LP3 ACRD -**/ - UINT8 Package; - -/** Offset 0x004E - Profile - Profile list. 0x19(Default). - 0x1:WIO2_800_7_8_8, 0x2:WIO2_1066_9_10_10, 0x3:LPDDR3_1066_8_10_10, 0x4:LPDDR3_1333_10_12_12, - 0x5:LPDDR3_1600_12_15_15, 0x6:LPDDR3_1866_14_17_17, 0x7:LPDDR3_2133_16_20_20, 0x8:LPDDR4_1066_10_10_10, - 0x9:LPDDR4_1600_14_15_15, 0xA:LPDDR4_2133_20_20_20, 0xB:LPDDR4_2400_24_22_22, 0xC:LPDDR4_2666_24_24_24, - 0xD:LPDDR4_2933_28_27_27, 0xE:LPDDR4_3200_28_29_29, 0xF:DDR3_1066_6_6_6, 0x10:DDR3_1066_7_7_7, - 0x11:DDR3_1066_8_8_8, 0x12:DDR3_1333_7_7_7, 0x13:DDR3_1333_8_8_8, 0x14:DDR3_1333_9_9_9, - 0x15:DDR3_1333_10_10_10, 0x16:DDR3_1600_8_8_8, 0x17:DDR3_1600_9_9_9, 0x18:DDR3_1600_10_10_10, - 0x19:DDR3_1600_11_11_11, 0x1A:DDR3_1866_10_10_10, 0x1B:DDR3_1866_11_11_11, 0x1C:DDR3_1866_12_12_12, - 0x1D:DDR3_1866_13_13_13, 0x1E:DDR3_2133_11_11_11, 0x1F:DDR3_2133_12_12_12, 0x20:DDR3_2133_13_13_13, - 0x21:DDR3_2133_14_14_14, 0x22:DDR4_1333_10_10_10, 0x23:DDR4_1600_10_10_10, 0x24:DDR4_1600_11_11_11, - 0x25:DDR4_1600_12_12_12, 0x26:DDR4_1866_12_12_12, 0x27:DDR4_1866_13_13_13, 0x28:DDR4_1866_14_14_14, - 0x29:DDR4_2133_14_14_14, 0x2A:DDR4_2133_15_15_15, 0x2B:DDR4_2133_16_16_16, 0x2C:DDR4_2400_15_15_15, - 0x2D:DDR4_2400_16_16_16, 0x2E:DDR4_2400_17_17_17, 0x2F:DDR4_2400_18_18_18 -**/ - UINT8 Profile; - -/** Offset 0x004F - MemoryDown - Memory Down. 0x0(Default). - 0x0:No, 0x1:Yes, 0x2:1MD+SODIMM (for DDR3L only) ACRD, 0x3:1x32 LPDDR4 -**/ - UINT8 MemoryDown; - -/** Offset 0x0050 - DDR3LPageSize - NOTE: Only for memory down or downgrade DDR3L frequency. 0x01:1KB(Default), 0x02:2KB. - 0x1:1KB, 0x2:2KB -**/ - UINT8 DDR3LPageSize; - -/** Offset 0x0051 - DDR3LASR - NOTE: Only for memory down. 0x00:Not Supported(Default), 0x01:Supported. - 0x0:Not Supported, 0x1:Supported -**/ - UINT8 DDR3LASR; - -/** Offset 0x0052 - ScramblerSupport - Scrambler Support. 0x00:Not Supported, 0x01:Supported(Default). - $EN_DIS -**/ - UINT8 ScramblerSupport; - -/** Offset 0x0053 - ChannelHashMask - Channel Hash Mask. 0x00(Default). -**/ - UINT16 ChannelHashMask; - -/** Offset 0x0055 - SliceHashMask - Slice Hash Mask. 0x00(Default). -**/ - UINT16 SliceHashMask; - -/** Offset 0x0057 - InterleavedMode - Interleaved Mode. 0x00:Disable(Default), 0x02:Enable. - 0x0:Disable, 0x2:Enable -**/ - UINT8 InterleavedMode; - -/** Offset 0x0058 - ChannelsSlicesEnable - Channels Slices Enable. 0x00:Disable(Default), 0x01:Enable. - $EN_DIS -**/ - UINT8 ChannelsSlicesEnable; - -/** Offset 0x0059 - MinRefRate2xEnable - Provided as a means to defend against Row-Hammer attacks. 0x00:Disable(Default), - 0x01:Enable. - $EN_DIS -**/ - UINT8 MinRefRate2xEnable; - -/** Offset 0x005A - DualRankSupportEnable - Dual Rank Support Enable. 0x00:Disable, 0x01:Enable(Default). - $EN_DIS -**/ - UINT8 DualRankSupportEnable; - -/** Offset 0x005B - RmtMode - Rank Margin Tool Mode. 0x00(Default). - $EN_DIS -**/ - UINT8 RmtMode; - -/** Offset 0x005C - MemorySizeLimit - Memory Size Limit: This value is used to restrict the total amount of memory and - the calculations based on it. Value is in MB. Example encodings are: 0x400 = 1GB, - 0x800 = 2GB, 0x1000 = 4GB, 0x2000 8GB. 0x0000(Default) -**/ - UINT16 MemorySizeLimit; - -/** Offset 0x005E - LowMemoryMaxValue - Low Memory Max Value: This value is used to restrict the amount of memory below - 4GB and the calculations based on it. Value is in MB.Example encodings are: 0x400 - = 1GB, 0x800 = 2GB, 0x1000 = 4GB, 0x2000 8GB. 0x0000(Default). -**/ - UINT16 LowMemoryMaxValue; - -/** Offset 0x0060 - DisableFastBoot - 00:Disabled Used saved training data (if valid)(Default), 01:Enabled; Full re-train - of memory. - $EN_DIS -**/ - UINT8 DisableFastBoot; - -/** Offset 0x0061 - HighMemoryMaxValue - High Memory Max Value: This value is used to restrict the amount of memory above - 4GB and the calculations based on it. Value is in MB. Example encodings are: 0x0400:1GB, - 0x0800:2GB, 0x1000:4GB, 0x2000:8GB. 0x00(Default). -**/ - UINT16 HighMemoryMaxValue; - -/** Offset 0x0063 - DIMM0SPDAddress - DIMM0 SPD Address (NOTE: Only for DDR3L only. Please put 0 for MemoryDown. 0xA0(Default). -**/ - UINT8 DIMM0SPDAddress; - -/** Offset 0x0064 - DIMM1SPDAddress - DIMM1 SPD Address (NOTE: Only for DDR3L only. Please put 0 for MemoryDown. 0xA4(Default). -**/ - UINT8 DIMM1SPDAddress; - -/** Offset 0x0065 - Ch0_RankEnable - NOTE: Only for memory down. Set to 1 to enable Ch0 rank. 0x00(Default). -**/ - UINT8 Ch0_RankEnable; - -/** Offset 0x0066 - Ch0_DeviceWidth - NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. 0x00(Default). - 0b0000:x8, 0b0001:x16, 0b0010:x32, 0b0011:x64 -**/ - UINT8 Ch0_DeviceWidth; - -/** Offset 0x0067 - Ch0_DramDensity - NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00(Default). - 0b0000:4Gb, 0b0001:6Gb, 0b0010:8Gb, 0b0011:12Gb, 0b0100:16Gb -**/ - UINT8 Ch0_DramDensity; - -/** Offset 0x0068 - Ch0_Option - Rank Select Interleaving Enable. See Address Mapping section for full description. - 0:Rank Select Interleaving disabled, 1:Rank Select Interleaving enabled. [1] Bank - Address Hashing Enable. See Address Mapping section for full description. 0:Bank - Address Hashing disabled, 1:Bank Address Hashing enabled. [3:2] Reserved. [5:4] - This register specifies the address mapping to be used: 00:1KB (A), 01:2KB (B). - 0x03(Default). -**/ - UINT8 Ch0_Option; - -/** Offset 0x0069 - Ch0_OdtConfig - ODT configuration control. 0:WEAK_ODT_CONFIG(Default), 1:STRONG_ODT_CONFIG. -**/ - UINT8 Ch0_OdtConfig; - -/** Offset 0x006A - Ch0_TristateClk1 - Parameter used to determine whether to tristate CLK1. 0x00(Default). -**/ - UINT8 Ch0_TristateClk1; - -/** Offset 0x006B - Ch0_Mode2N - 2N Mode. 0x00(Default). -**/ - UINT8 Ch0_Mode2N; - -/** Offset 0x006C - Ch0_OdtLevels - Rank Select Interleaving Enable. See Address Mapping section for full description. - 0:Rank Select Interleaving disabled(Default), 1:Rank Select Interleaving enabled. - [1] Bank Address Hashing Enable. See Address Mapping section for full description. - 0:Bank Address Hashing disabled, 1:Bank Address Hashing enabled. [3:2] Reserved. - [5:4] This register specifies the address mapping to be used:00:1KB (A), 01:2KB (B). -**/ - UINT8 Ch0_OdtLevels; - -/** Offset 0x006D - Ch1_RankEnable - NOTE: Only for memory down. Set to 1 to enable Ch1 rank. -**/ - UINT8 Ch1_RankEnable; - -/** Offset 0x006E - Ch1_DeviceWidth - NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. 0x00(Default). - 0b0000:x8, 0b0001:x16, 0b0010:x32, 0b0011:x64 -**/ - UINT8 Ch1_DeviceWidth; - -/** Offset 0x006F - Ch1_DramDensity - NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00:4Gb(Default). - 0b0000:4Gb, 0b0001:6Gb, 0b0010:8Gb, 0b0011:12Gb, 0b0100:16Gb -**/ - UINT8 Ch1_DramDensity; - -/** Offset 0x0070 - Ch1_Option - Rank Select Interleaving Enable. See Address Mapping section for full description. - 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1] - Bank Address Hashing Enable. See Address Mapping section for full description. - 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved. - [5:4] This register specifies the address mapping to be used: 00:1KB (A), 01:2KB - (B), 0x03(Default). -**/ - UINT8 Ch1_Option; - -/** Offset 0x0071 - Ch1_OdtConfig - ODT configuration control. 0:WEAK_ODT_CONFIG(Default), 1:STRONG_ODT_CONFIG. -**/ - UINT8 Ch1_OdtConfig; - -/** Offset 0x0072 - Ch1_TristateClk1 - Parameter used to determine whether to tristate CLK1. 0x00(Default). -**/ - UINT8 Ch1_TristateClk1; - -/** Offset 0x0073 - Ch1_Mode2N - 2N Mode. 0x00(Default). -**/ - UINT8 Ch1_Mode2N; - -/** Offset 0x0074 - Ch1_OdtLevels - Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default), - 1:ODT_AB_HIGH_HIGH. 3:ODT_AB_HIGH_LOW. -**/ - UINT8 Ch1_OdtLevels; - -/** Offset 0x0075 - Ch2_RankEnable - NOTE: Only for memory down. Set to 1 to enable Ch2 rank. -**/ - UINT8 Ch2_RankEnable; - -/** Offset 0x0076 - Ch2_DeviceWidth - NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. - 0b0000:x8, 0b0001:x16, 0b0010:x32, 0b0011:x64 -**/ - UINT8 Ch2_DeviceWidth; - -/** Offset 0x0077 - Ch2_DramDensity - NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00(Default). - 0b0000:4Gb, 0b0001:6Gb, 0b0010:8Gb, 0b0011:12Gb, 0b0100:16Gb -**/ - UINT8 Ch2_DramDensity; - -/** Offset 0x0078 - Ch2_Option - Rank Select Interleaving Enable. See Address Mapping section for full description.. - 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1] - Bank Address Hashing Enable. See Address Mapping section for full description.. - 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved. - [5:4] This register specifies the address mapping to be used:. 00:1KB (A)(Default). - 01:2KB (B). -**/ - UINT8 Ch2_Option; - -/** Offset 0x0079 - Ch2_OdtConfig - ODT configuration control. 0:WEAK_ODT_CONFIG(Default), 1:STRONG_ODT_CONFIG. -**/ - UINT8 Ch2_OdtConfig; - -/** Offset 0x007A - Ch2_TristateClk1 - Parameter used to determine whether to tristate CLK1. 0x00(Default). -**/ - UINT8 Ch2_TristateClk1; - -/** Offset 0x007B - Ch2_Mode2N - 2N Mode. 0x00(Default). -**/ - UINT8 Ch2_Mode2N; - -/** Offset 0x007C - Ch2_OdtLevels - Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default), - 1:ODT_AB_HIGH_HIGH, 3:ODT_AB_HIGH_LOW. -**/ - UINT8 Ch2_OdtLevels; - -/** Offset 0x007D - Ch3_RankEnable - NOTE: Only for memory down. Set to 1 to enable Ch3 rank. 0x00(Default). -**/ - UINT8 Ch3_RankEnable; - -/** Offset 0x007E - Ch3_DeviceWidth - NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. 0x00:x8(Default), - 0x01:x16, 0x02:x32, 0x03:x64. - 0b0000:x8, 0b0001:x16, 0b0010:x32, 0b0011:x64 -**/ - UINT8 Ch3_DeviceWidth; - -/** Offset 0x007F - Ch3_DramDensity - NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00:4Gb(Default), - 0x01:6Gb, 0x02:8Gb, 0x03:12Gb, 0x04:16Gb. - 0b0000:4Gb, 0b0001:6Gb, 0b0010:8Gb, 0b0011:12Gb, 0b0100:16Gb -**/ - UINT8 Ch3_DramDensity; - -/** Offset 0x0080 - Ch3_Option - Rank Select Interleaving Enable. See Address Mapping section for full description.. - 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1] - Bank Address Hashing Enable. See Address Mapping section for full description.. - 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved. - [5:4] This register specifies the address mapping to be used:. 00 - 1KB (A). 01 - - 2KB (B). -**/ - UINT8 Ch3_Option; - -/** Offset 0x0081 - Ch3_OdtConfig - ODT configuration control.. 0:WEAK_ODT_CONFIG(Default). 1:STRONG_ODT_CONFIG. -**/ - UINT8 Ch3_OdtConfig; - -/** Offset 0x0082 - Ch3_TristateClk1 - Parameter used to determine whether to tristate CLK1. 0x00(Default). -**/ - UINT8 Ch3_TristateClk1; - -/** Offset 0x0083 - Ch3_Mode2N - 2N Mode. 0x00(Default). -**/ - UINT8 Ch3_Mode2N; - -/** Offset 0x0084 - Ch3_OdtLevels - Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default), - 1:ODT_AB_HIGH_HIGH, 3:ODT_AB_HIGH_LOW. -**/ - UINT8 Ch3_OdtLevels; - -/** Offset 0x0085 - RmtCheckRun - RmtCheckRun: 0x00(Default). -**/ - UINT8 RmtCheckRun; - -/** Offset 0x0086 - Ch0_Bit_swizzling - Channel 0 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. -**/ - UINT8 Ch0_Bit_swizzling[32]; - -/** Offset 0x00A6 - Ch1_Bit_swizzling - Channel 1 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. -**/ - UINT8 Ch1_Bit_swizzling[32]; - -/** Offset 0x00C6 - Ch2_Bit_swizzling - Channel 2 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. -**/ - UINT8 Ch2_Bit_swizzling[32]; - -/** Offset 0x00E6 - Ch3_Bit_swizzling - Channel 3 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. -**/ - UINT8 Ch3_Bit_swizzling[32]; - -/** Offset 0x0106 - RmtMarginCheckScaleHighThreshold - RmtMarginCheckScaleHighThreshold. 0x0000(Default). -**/ - UINT16 RmtMarginCheckScaleHighThreshold; - -/** Offset 0x0108 - MsgLevelMask - MsgLevelMask. 0x00000000(Default). -**/ - UINT32 MsgLevelMask; - -/** Offset 0x010C -**/ - UINT32 UnusedUpdSpace0; - -/** Offset 0x0110 - PreMem GPIO Table Entry Number. Currently maximum entry number is 4 - Number of Entries in PreMem GPIO Table. 0(Default). -**/ - UINT8 PreMemGpioTableEntryNum; - -/** Offset 0x0111 - PreMem GPIO Pin Number for each table - Number of Pins in each PreMem GPIO Table. 0(Default). -**/ - UINT8 PreMemGpioTablePinNum[4]; - -/** Offset 0x0115 - PreMem GPIO Table Pointer - Pointer to Array of pointers to PreMem GPIO Table. 0x00000000(Default). -**/ - UINT32 PreMemGpioTablePtr; - -/** Offset 0x0119 - Enhance the port 8xh decoding - Enable/Disable Enhance the port 8xh decoding. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 EnhancePort8xhDecoding; - -/** Offset 0x011A - OEM File Loading Address - Determine the memory base address to load a specified file from CSE file system - after memory is available. -**/ - UINT32 OemLoadingBase; - -/** Offset 0x011E - OEM File Name to Load - Specify a file name to load from CSE file system after memory is available. Empty - indicates no file needs to be loaded. -**/ - UINT8 OemFileName[16]; - -/** Offset 0x012E - SPD Data Write - Enable/Disable SPD data write on the SMBUS. 0x00:Disable(Default), 0x01:Enable. - $EN_DIS -**/ - UINT8 SpdWriteEnable; - -/** Offset 0x012F - MRC Training Data Saving - Enable/Disable MRC training data saving in FSP. 0x00:Disable(Default), 0x01:Enable. - $EN_DIS -**/ - UINT8 MrcDataSaving; - -/** Offset 0x0130 - eMMC Trace Length - Select eMMC trace length to load OEM file from when loading OEM file name is specified. - 0x0:Long(Default), 0x1:Short. - 0x0:Long, 0x1:Short -**/ - UINT8 eMMCTraceLen; - -/** Offset 0x0131 -**/ - VOID* MrcBootDataPtr; - -/** Offset 0x0135 - Skip CSE RBP to support zero sized IBB - Enable/Disable skip CSE RBP for bootloader which loads IBB without assistance of - CSE. 0x00:Disable(Default), 0x01:Enable. - $EN_DIS -**/ - UINT8 SkipCseRbp; - -/** Offset 0x0136 - Npk Enable - Enable/Disable Npk. 0:Disable, 1:Enable, 2:Debugger, 3:Auto(Default). - 0:Disable, 1:Enable, 2:Debugger, 3:Auto -**/ - UINT8 NpkEn; - -/** Offset 0x0137 - FW Trace Enable - Enable/Disable FW Trace. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 FwTraceEn; - -/** Offset 0x0138 - FW Trace Destination - FW Trace Destination. 1-NPK_TRACE_TO_MEMORY, 2-NPK_TRACE_TO_DCI, 3-NPK_TRACE_TO_BSSB, - 4-NPK_TRACE_TO_PTI(Default). -**/ - UINT8 FwTraceDestination; - -/** Offset 0x0139 - NPK Recovery Dump - Enable/Disable NPK Recovery Dump. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 RecoverDump; - -/** Offset 0x013A - Memory Region 0 Buffer WrapAround - Memory Region 0 Buffer WrapAround. 0-n0-warp, 1-warp(Default). -**/ - UINT8 Msc0Wrap; - -/** Offset 0x013B - Memory Region 1 Buffer WrapAround - Memory Region 1 Buffer WrapAround. 0-n0-warp, 1-warp(Default). -**/ - UINT8 Msc1Wrap; - -/** Offset 0x013C - Memory Region 0 Buffer Size - Memory Region 0 Buffer Size. 0-0MB(Default), 1-1MB, 2-8MB, 3-64MB, 4-128MB, 5-256MB, - 6-512MB, 7-1GB. -**/ - UINT32 Msc0Size; - -/** Offset 0x0140 - Memory Region 1 Buffer Size - Memory Region 1 Buffer Size, 0-0MB(Default), 1-1MB, 2-8MB, 3-64MB, 4-128MB, 5-256MB, - 6-512MB, 7-1GB. -**/ - UINT32 Msc1Size; - -/** Offset 0x0144 - PTI Mode - PTI Mode. 0-0ff, 1-x4(Default), 2-x8, 3-x12, 4-x16. -**/ - UINT8 PtiMode; - -/** Offset 0x0145 - PTI Training - PTI Training. 0-off(Default), 1-6=1-6. -**/ - UINT8 PtiTraining; - -/** Offset 0x0146 - PTI Speed - PTI Speed. 0-full, 1-half, 2-quarter(Default). -**/ - UINT8 PtiSpeed; - -/** Offset 0x0147 - Punit Message Level - Punit Message Output Verbosity Level. 0, 1(Default), 2-4=2-4. -**/ - UINT8 PunitMlvl; - -/** Offset 0x0148 - PMC Message Level - PMC Message Output Verbosity Level. 0, 1(Default), 2-4=2-4. -**/ - UINT8 PmcMlvl; - -/** Offset 0x0149 - SW Trace Enable - Enable/Disable SW Trace. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 SwTraceEn; - -/** Offset 0x014A - Periodic Retraining Disable - Option to disable LPDDR4 Periodic Retraining. 0x00:Disable(Default), 0x01:Enable. - $EN_DIS -**/ - UINT8 PeriodicRetrainingDisable; - -/** Offset 0x014B -**/ - UINT8 ReservedFspmUpd[5]; -} FSP_M_CONFIG; - -/** Fsp M Test Configuration -**/ -typedef struct { - -/** Offset 0x0150 -**/ - UINT32 Signature; - -/** Offset 0x0154 -**/ - UINT8 ReservedFspmTestUpd[28]; -} FSP_M_TEST_CONFIG; - -/** Fsp M Restricted Configuration -**/ -typedef struct { - -/** Offset 0x0170 -**/ - UINT32 Signature; - -/** Offset 0x0174 -**/ - UINT8 ReservedFspmRestrictedUpd[138]; -} FSP_M_RESTRICTED_CONFIG; - -/** Fsp M UPD Configuration -**/ -typedef struct { - -/** Offset 0x0000 -**/ - FSP_UPD_HEADER FspUpdHeader; - -/** Offset 0x0020 -**/ - FSPM_ARCH_UPD FspmArchUpd; - -/** Offset 0x0040 -**/ - FSP_M_CONFIG FspmConfig; - -/** Offset 0x0150 -**/ - FSP_M_TEST_CONFIG FspmTestConfig; - -/** Offset 0x0170 -**/ - FSP_M_RESTRICTED_CONFIG FspmRestrictedConfig; - -/** Offset 0x01FE -**/ - UINT16 UpdTerminator; -} FSPM_UPD; - -#pragma pack(pop) - -#endif diff --git a/src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h b/src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h deleted file mode 100644 index 553eba3f18..0000000000 --- a/src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h +++ /dev/null @@ -1,1541 +0,0 @@ -/** @file - -Copyright (c) 2016, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPSUPD_H__ -#define __FSPSUPD_H__ - -#include <FspUpd.h> - -#pragma pack(push, 1) - - -/** Fsp S Configuration -**/ -typedef struct { - -/** Offset 0x0020 - ActiveProcessorCores - Number of active cores. 0:Disable(Default), 1:Enable. -**/ - UINT8 ActiveProcessorCores; - -/** Offset 0x0021 - Disable Core1 - Disable/Enable Core1. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 DisableCore1; - -/** Offset 0x0022 - Disable Core2 - Disable/Enable Core2. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 DisableCore2; - -/** Offset 0x0023 - Disable Core3 - Disable/Enable Core3. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 DisableCore3; - -/** Offset 0x0024 - VMX Enable - Enable or Disable VMX. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 VmxEnable; - -/** Offset 0x0025 - Memory region allocation for Processor Trace - Memory region allocation for Processor Trace, allowed range is from 4K (0x0) to - 128MB (0xF); <b>0xFF: Disable. 0xFF:Disable(Default) -**/ - UINT8 ProcTraceMemSize; - -/** Offset 0x0026 - Enable Processor Trace - Enable or Disable Processor Trace feature. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 ProcTraceEnable; - -/** Offset 0x0027 - Eist - Enable or Disable Intel SpeedStep Technology. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 Eist; - -/** Offset 0x0028 - Boot PState - Boot PState with HFM or LFM. 0:HFM(Default), 1:LFM. -**/ - UINT8 BootPState; - -/** Offset 0x0029 - CPU power states (C-states) - Enable or Disable CPU power states (C-states). 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 EnableCx; - -/** Offset 0x002A - Enhanced C-states - Enable or Disable Enhanced C-states. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 C1e; - -/** Offset 0x002B - Bi-Directional PROCHOT# - Enable or Disable Bi-Directional PROCHOT#. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 BiProcHot; - -/** Offset 0x002C - Max Pkg Cstate - Max Pkg Cstate. 0:PkgC0C1, 1:PkgC2, 2:PkgC3(Default), 3:PkgC6, 4:PkgC7, 5:PkgC7s, - 6:PkgC8, 7:PkgC9, 8:PkgC10, 9:PkgCMax, 254:PkgCpuDefault, 255:PkgAuto. -**/ - UINT8 PkgCStateLimit; - -/** Offset 0x002D -**/ - UINT8 UnusedUpdSpace0; - -/** Offset 0x002E - C-State auto-demotion - C-State Auto Demotion. 0:Disable(Default) C1 and C3 Auto-demotion, 1:Enable C3/C6/C7 - Auto-demotion to C1, 2:Enable C6/C7 Auto-demotion to C3, 3:Enable C6/C7 Auto-demotion - to C1 and C3. -**/ - UINT8 CStateAutoDemotion; - -/** Offset 0x002F - C-State un-demotion - C-State un-demotion. 0:Disable(Default) C1 and C3 Un-demotion, 1:Enable C1 Un-demotion, - 2:Enable C3 Un-demotion, 3:Enable C1 and C3 Un-demotion. -**/ - UINT8 CStateUnDemotion; - -/** Offset 0x0030 - Max Core C-State - Max Core C-State. 0:Unlimited, 1:C1, 2:C3, 3:C6, 4:C7, 5:C8, 6:C9, 7:C10, 8:CCx(Default). -**/ - UINT8 MaxCoreCState; - -/** Offset 0x0031 - Package C-State Demotion - Enable or Disable Package Cstate Demotion. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 PkgCStateDemotion; - -/** Offset 0x0032 - Package C-State Un-demotion - Enable or Disable Package Cstate UnDemotion. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 PkgCStateUnDemotion; - -/** Offset 0x0033 - Turbo Mode - Enable or Disable long duration Turbo Mode. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 TurboMode; - -/** Offset 0x0034 - SC HDA Verb Table Entry Number - Number of Entries in Verb Table. 0(Default). -**/ - UINT8 HdaVerbTableEntryNum; - -/** Offset 0x0035 - SC HDA Verb Table Pointer - Pointer to Array of pointers to Verb Table. 0x00000000(Default). -**/ - UINT32 HdaVerbTablePtr; - -/** Offset 0x0039 - Enable/Disable P2SB device hidden. - Enable/Disable P2SB device hidden. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 P2sbUnhide; - -/** Offset 0x003A - IPU Enable/Disable - Enable/Disable IPU Device. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 IpuEn; - -/** Offset 0x003B - IMGU ACPI mode selection - 0:Auto, 1:IGFX Child device(Default), 2:ACPI device. - 0:Disable, 1:IGFX Child device, 2:ACPI device -**/ - UINT8 IpuAcpiMode; - -/** Offset 0x003C - GttMmAdr - GttMmAdr structure for initialization. 0xBF000000(Default). -**/ - UINT32 GttMmAdr; - -/** Offset 0x0040 - GmAdr - GmAdr structure for initialization. 0xA0000000(Default). -**/ - UINT32 GmAdr; - -/** Offset 0x0044 - Enable ForceWake - Enable/disable ForceWake Models. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 ForceWake; - -/** Offset 0x0045 - Enable PavpLock - Enable/disable PavpLock. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 PavpLock; - -/** Offset 0x0046 - Enable GraphicsFreqModify - Enable/disable GraphicsFreqModify. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 GraphicsFreqModify; - -/** Offset 0x0047 - Enable GraphicsFreqReq - Enable/disable GraphicsFreqReq. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 GraphicsFreqReq; - -/** Offset 0x0048 - Enable GraphicsVideoFreq - Enable/disable GraphicsVideoFreq. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 GraphicsVideoFreq; - -/** Offset 0x0049 - Enable PmLock - Enable/disable PmLock. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 PmLock; - -/** Offset 0x004A - Enable DopClockGating - Enable/disable DopClockGating. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 DopClockGating; - -/** Offset 0x004B - Enable UnsolicitedAttackOverride - Enable/disable UnsolicitedAttackOverride. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 UnsolicitedAttackOverride; - -/** Offset 0x004C - Enable WOPCMSupport - Enable/disable WOPCMSupport. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 WOPCMSupport; - -/** Offset 0x004D - Enable WOPCMSize - Enable/disable WOPCMSize. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 WOPCMSize; - -/** Offset 0x004E - Enable PowerGating - Enable/disable PowerGating. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 PowerGating; - -/** Offset 0x004F - Enable UnitLevelClockGating - Enable/disable UnitLevelClockGating. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 UnitLevelClockGating; - -/** Offset 0x0050 - Enable FastBoot - Enable/disable FastBoot. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 FastBoot; - -/** Offset 0x0051 - Enable DynSR - Enable/disable DynSR. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 DynSR; - -/** Offset 0x0052 - Enable SaIpuEnable - Enable/disable SaIpuEnable. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 SaIpuEnable; - -/** Offset 0x0053 - BMP Logo Data Size - BMP logo data buffer size. 0x00000000(Default). -**/ - UINT32 LogoSize; - -/** Offset 0x0057 - BMP Logo Data Pointer - BMP logo data pointer to a BMP format buffer. 0x00000000(Default). -**/ - UINT32 LogoPtr; - -/** Offset 0x005B - Graphics Configuration Data Pointer - Graphics configuration data used for initialization. 0x00000000(Default). -**/ - UINT32 GraphicsConfigPtr; - -/** Offset 0x005F - GT PM Support - Enable/Disable GT power management support. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 PmSupport; - -/** Offset 0x0060 - RC6(Render Standby) - Enable/Disable render standby support. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 EnableRenderStandby; - -/** Offset 0x0061 - PAVP Enable - Enable/Disable Protected Audio Visual Path (PAVP). 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 PavpEnable; - -/** Offset 0x0062 - PAVP PR3 - Enable/Disable PAVP PR3 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 PavpPr3; - -/** Offset 0x0063 - CdClock Frequency selection - 0:144MHz, 1:288MHz, 2:384MHz, 3:576MHz, 4:624MHz(Default). - 0: 144 MHz, 1: 288 MHz, 2: 384 MHz, 3: 576 MHz, 4: 624 MHz -**/ - UINT8 CdClock; - -/** Offset 0x0064 - Enable/Disable PeiGraphicsPeimInit - Enable/Disable PeiGraphicsPeimInit 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 PeiGraphicsPeimInit; - -/** Offset 0x0065 - Write Protection Support - Enable/disable Write Protection. 0:Disable, 1:Enable(Default). -**/ - UINT8 WriteProtectionEnable[5]; - -/** Offset 0x006A - Read Protection Support - Enable/disable Read Protection. 0:Disable, 1:Enable(Default). -**/ - UINT8 ReadProtectionEnable[5]; - -/** Offset 0x006F - Protected Range Limitation - The address of the upper limit of protection, 0x0FFFh(Default). -**/ - UINT16 ProtectedRangeLimit[5]; - -/** Offset 0x0079 - Protected Range Base - The base address of the upper limit of protection. 0x0000(Default). -**/ - UINT16 ProtectedRangeBase[5]; - -/** Offset 0x0083 - Enable SC Gaussian Mixture Models - Enable/disable SC Gaussian Mixture Models. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 Gmm; - -/** Offset 0x0084 - GMM Clock Gating - PGCB Clock Trunk - Enable/disable PGCB Clock Trunk. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 ClkGatingPgcbClkTrunk; - -/** Offset 0x0085 - GMM Clock Gating - Sideband - Enable/disable Sideband. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 ClkGatingSb; - -/** Offset 0x0086 - GMM Clock Gating - Sideband - Enable/disable Sideband. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 ClkGatingSbClkTrunk; - -/** Offset 0x0087 - GMM Clock Gating - Sideband Clock Partition - Enable/disable Sideband Clock Partition. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 ClkGatingSbClkPartition; - -/** Offset 0x0088 - GMM Clock Gating - Core - Enable/disable Core. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 ClkGatingCore; - -/** Offset 0x0089 - GMM Clock Gating - DMA - Enable/disable DMA. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 ClkGatingDma; - -/** Offset 0x008A - GMM Clock Gating - Register Access - Enable/disable Register Access. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 ClkGatingRegAccess; - -/** Offset 0x008B - GMM Clock Gating - Host - Enable/disable Host. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 ClkGatingHost; - -/** Offset 0x008C - GMM Clock Gating - Partition - Enable/disable Partition. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 ClkGatingPartition; - -/** Offset 0x008D - Clock Gating - Trunk - Enable/disable Trunk. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 ClkGatingTrunk; - -/** Offset 0x008E - HD Audio Support - Enable/disable HDA Audio Feature. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 HdaEnable; - -/** Offset 0x008F - HD Audio DSP Support - Enable/disable HDA Audio DSP Feature. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 DspEnable; - -/** Offset 0x0090 - Azalia wake-on-ring - Enable/disable Azalia wake-on-ring. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 Pme; - -/** Offset 0x0091 - HD-Audio I/O Buffer Ownership - Set HD-Audio I/O Buffer Ownership. 0:HD-Audio link owns all the I/O buffers(Default) - 0:HD-Audio link owns all the I/O buffers, 1:HD-Audio link owns 4 I/O buffers and - I2S port owns 4 I/O buffers, 3:I2S port owns all the I/O buffers -**/ - UINT8 HdAudioIoBufferOwnership; - -/** Offset 0x0092 - HD-Audio I/O Buffer Voltage - HD-Audio I/O Buffer Voltage Mode Selectiton . 0:3.3V(Default), 1:1.8V. - 0: 3.3V, 1: 1.8V -**/ - UINT8 HdAudioIoBufferVoltage; - -/** Offset 0x0093 - HD-Audio Virtual Channel Type - HD-Audio Virtual Channel Type Selectiton. 0:VC0(Default), 1:VC1. - 0: VC0, 1: VC1 -**/ - UINT8 HdAudioVcType; - -/** Offset 0x0094 - HD-Audio Link Frequency - HD-Audio Virtual Channel Type Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz, - 4:96MHz, 5:Invalid. - 0: 6MHz, 1: 12MHz, 2: 24MHz, 3: 48MHz, 4: 96MHz, 5: Invalid -**/ - UINT8 HdAudioLinkFrequency; - -/** Offset 0x0095 - HD-Audio iDisp-Link Frequency - HD-Audio iDisp-Link Frequency Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz, - 4:96MHz, 5:Invalid. - 0: 6MHz, 1: 12MHz, 2: 24MHz, 3: 48MHz, 4: 96MHz, 5: Invalid -**/ - UINT8 HdAudioIDispLinkFrequency; - -/** Offset 0x0096 - HD-Audio iDisp-Link T-Mode - HD-Audio iDisp-Link T-Mode Selectiton. 0:2T(Default), 1:1T. - 0: 2T, 1: 1T -**/ - UINT8 HdAudioIDispLinkTmode; - -/** Offset 0x0097 - HD-Audio Disp DMIC - HD-Audio Disp DMIC Selectiton. 0:Disable, 1:2ch array(Default), 2:4ch array. - 0: Disable, 1: 2ch array, 2: 4ch array -**/ - UINT8 DspEndpointDmic; - -/** Offset 0x0098 - HD-Audio Bluetooth - Enable/Disable HD-Audio bluetooth. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 DspEndpointBluetooth; - -/** Offset 0x0099 - HD-Audio I2S SHK - Enable/Disable HD-Audio I2S SHK. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 DspEndpointI2sSkp; - -/** Offset 0x009A - HD-Audio I2S HP - Enable/Disable HD-Audio I2S HP. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 DspEndpointI2sHp; - -/** Offset 0x009B - HD-Audio Controller Power Gating - Enable/Disable HD-Audio Controller Power Gating. This option is deprecated. - $EN_DIS -**/ - UINT8 AudioCtlPwrGate; - -/** Offset 0x009C - HD-Audio ADSP Power Gating - Enable/Disable HD-Audio ADSP Power Gating. This option is deprecated. - $EN_DIS -**/ - UINT8 AudioDspPwrGate; - -/** Offset 0x009D - HD-Audio CSME Memory Transfers - Enable/Disable HD-Audio CSME Memory Transfers. 0:VC0(Default), 1:VC2. - 0: VC0, 1: VC2 -**/ - UINT8 Mmt; - -/** Offset 0x009E - HD-Audio Host Memory Transfers - Enable/Disable HD-Audio Host Memory Transfers. 0:VC0(Default), 1:VC2. - 0: VC0, 1: VC2 -**/ - UINT8 Hmt; - -/** Offset 0x009F - HD-Audio BIOS Configuration Lock Down - Enable/Disable HD-Audio BIOS Configuration Lock Down. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 BiosCfgLockDown; - -/** Offset 0x00A0 - HD-Audio Power Gating - Enable/Disable HD-Audio BIOS Configuration Lock Down. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 HDAudioPwrGate; - -/** Offset 0x00A1 - HD-Audio Clock Gatingn - Enable/Disable HD-Audio Clock Gating. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 HDAudioClkGate; - -/** Offset 0x00A2 - Bitmask of DSP Feature - Set Bitmask of HD-Audio DSP Feature. 0x00000000(Default). - [BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6] - - BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0: - Intel WoV, 1: Windows Voice Activation -**/ - UINT32 DspFeatureMask; - -/** Offset 0x00A6 - Bitmask of supported DSP Post-Processing Modules - Set HD-Audio Bitmask of supported DSP Post-Processing Modules. 0x00000000(Default). - [BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6] - - BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0: - Intel WoV, 1: Windows Voice Activation -**/ - UINT32 DspPpModuleMask; - -/** Offset 0x00AA - Enable High Precision Timer - Enable/Disable Hpet. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 Hpet; - -/** Offset 0x00AB - Hpet Valid BDF Value - Enable/Disable Hpet Valid BDF Value. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 HpetBdfValid; - -/** Offset 0x00AC - Bus Number of Hpet - Completer ID of Bus Number of Hpet. Default = 0xFA(Default). -**/ - UINT8 HpetBusNumber; - -/** Offset 0x00AD - Device Number of Hpet - Completer ID of Device Number of Hpet. 0x1F(Default). -**/ - UINT8 HpetDeviceNumber; - -/** Offset 0x00AE - Function Number of Hpet - Completer ID of Function Number of Hpet. 0x00(Default). -**/ - UINT8 HpetFunctionNumber; - -/** Offset 0x00AF -**/ - UINT32 UnusedUpdSpace1; - -/** Offset 0x00B3 - IoApic Valid BDF Value - Enable/Disable IoApic Valid BDF Value. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 IoApicBdfValid; - -/** Offset 0x00B4 - Bus Number of IoApic - Completer ID of Bus Number of IoApic. 0xFA(Default). -**/ - UINT8 IoApicBusNumber; - -/** Offset 0x00B5 - Device Number of IoApic - Completer ID of Device Number of IoApic. 0x0F(Default). -**/ - UINT8 IoApicDeviceNumber; - -/** Offset 0x00B6 - Function Number of IoApic - Completer ID of Function Number of IoApic. 0x00(Default). -**/ - UINT8 IoApicFunctionNumber; - -/** Offset 0x00B7 - IOAPIC Entry 24-119 - Enable/Disable IOAPIC Entry 24-119. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 IoApicEntry24_119; - -/** Offset 0x00B8 - IO APIC ID - This member determines IOAPIC ID. 0x01(Default). -**/ - UINT8 IoApicId; - -/** Offset 0x00B9 - IoApic Range - Define address bits 19:12 for the IOxAPIC range. 0x00(Default). -**/ - UINT8 IoApicRangeSelect; - -/** Offset 0x00BA - ISH Controller - Enable/Disable ISH Controller. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 IshEnable; - -/** Offset 0x00BB - BIOS Interface Lock Down - Enable/Disable BIOS Interface Lock Down bit to prevent writes to the Backup Control - Register. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 BiosInterface; - -/** Offset 0x00BC - Bios LockDown Enable - Enable the BIOS Lock Enable (BLE) feature and set EISS bit. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 BiosLock; - -/** Offset 0x00BD - SPI EISS Status - Enable/Disable InSMM.STS (EISS) in SPI. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 SpiEiss; - -/** Offset 0x00BE - BiosLock SWSMI Number - This member describes the SwSmi value for Bios Lock. 0xA9(Default). -**/ - UINT8 BiosLockSwSmiNumber; - -/** Offset 0x00BF - LPSS IOSF PMCTL S0ix Enable - Enable/Disable LPSS IOSF Bridge PMCTL Register S0ix Bits. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 LPSS_S0ixEnable; - -/** Offset 0x00C0 - LPSS I2C Clock Gating Configuration - Enable/Disable LPSS I2C Clock Gating. 0:Disable, 1:Enable(Default). -**/ - UINT8 I2cClkGateCfg[8]; - -/** Offset 0x00C8 - PSS HSUART Clock Gating Configuration - Enable/Disable LPSS HSUART Clock Gating. 0:Disable, 1:Enable(Default). -**/ - UINT8 HsuartClkGateCfg[4]; - -/** Offset 0x00CC - LPSS SPI Clock Gating Configuration - Enable/Disable LPSS SPI Clock Gating. 0:Disable, 1:Enable(Default). -**/ - UINT8 SpiClkGateCfg[3]; - -/** Offset 0x00CF - I2C Device 0 - Enable/Disable I2C Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 I2c0Enable; - -/** Offset 0x00D0 - I2C Device 1 - Enable/Disable I2C Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 I2c1Enable; - -/** Offset 0x00D1 - I2C Device 2 - Enable/Disable I2C Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 I2c2Enable; - -/** Offset 0x00D2 - I2C Device 3 - Enable/Disable I2C Device 3. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 I2c3Enable; - -/** Offset 0x00D3 - I2C Device 4 - Enable/Disable I2C Device 4. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 I2c4Enable; - -/** Offset 0x00D4 - I2C Device 5 - Enable/Disable I2C Device 5. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 I2c5Enable; - -/** Offset 0x00D5 - I2C Device 6 - Enable/Disable I2C Device 6. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 I2c6Enable; - -/** Offset 0x00D6 - I2C Device 7 - Enable/Disable I2C Device 7. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 I2c7Enable; - -/** Offset 0x00D7 - UART Device 0 - Enable/Disable UART Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 Hsuart0Enable; - -/** Offset 0x00D8 - UART Device 1 - Enable/Disable UART Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 Hsuart1Enable; - -/** Offset 0x00D9 - UART Device 2 - Enable/Disable UART Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 Hsuart2Enable; - -/** Offset 0x00DA - UART Device 3 - Enable/Disable UART Device 3. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 Hsuart3Enable; - -/** Offset 0x00DB - SPI UART Device 0 - Enable/Disable SPI Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 Spi0Enable; - -/** Offset 0x00DC - SPI UART Device 1 - Enable/Disable SPI Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 Spi1Enable; - -/** Offset 0x00DD - SPI UART Device 2 - Enable/Disable SPI Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. - 0: Disabled, 1: PCI Mode, 2: ACPI Mode -**/ - UINT8 Spi2Enable; - -/** Offset 0x00DE - UART Debug Base Address - UART Debug Base Address. 0x00000000(Default). -**/ - UINT32 Uart2KernelDebugBaseAddress; - -/** Offset 0x00E2 - OS Debug Feature - Enable/Disable OS Debug Feature. 0:Disable(Default), 1: Enable. - $EN_DIS -**/ - UINT8 OsDbgEnable; - -/** Offset 0x00E3 - DCI Feature - Enable/Disable DCI Feature. 0:Disable(Default), 1: Enable. - $EN_DIS -**/ - UINT8 DciEn; - -/** Offset 0x00E4 - Enable PCIE Clock Gating - Enable/disable PCIE Clock Gating. 0:Enable, 1:Disable(Default). - 0:Enable, 1:Disable -**/ - UINT8 PcieClockGatingDisabled; - -/** Offset 0x00E5 - Enable PCIE Root Port 8xh Decode - Enable/disable PCIE Root Port 8xh Decode. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 PcieRootPort8xhDecode; - -/** Offset 0x00E6 - PCIE 8xh Decode Port Index - PCIE 8xh Decode Port Index. 0x00(Default). -**/ - UINT8 Pcie8xhDecodePortIndex; - -/** Offset 0x00E7 - Enable PCIE Root Port Peer Memory Write - Enable/disable PCIE root port peer memory write. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 PcieRootPortPeerMemoryWriteEnable; - -/** Offset 0x00E8 - PCIE SWSMI Number - This member describes the SwSmi value for override PCIe ASPM table. 0xAA(Default). -**/ - UINT8 PcieAspmSwSmiNumber; - -/** Offset 0x00E9 - PCI Express Root Port - Control the PCI Express Root Port . 0:Disable, 1:Enable(Default). -**/ - UINT8 PcieRootPortEn[6]; - -/** Offset 0x00EF - Hide PCIE Root Port Configuration Space - Enable/disable Hide PCIE Root Port Configuration Space. 0:Disable(Default), 1:Enable. -**/ - UINT8 PcieRpHide[6]; - -/** Offset 0x00F5 - PCIE Root Port Slot Implement - Enable/disable PCIE Root Port Slot Implement. 0:Disable, 1:Enable(Default). -**/ - UINT8 PcieRpSlotImplemented[6]; - -/** Offset 0x00FB - Hot Plug - PCI Express Hot Plug Enable/Disable. 0:Disable, 1:Enable(Default). -**/ - UINT8 PcieRpHotPlug[6]; - -/** Offset 0x0101 - PCIE PM SCI - Enable/Disable PCI Express PME SCI. 0:Disable(Default), 1:Enable. -**/ - UINT8 PcieRpPmSci[6]; - -/** Offset 0x0107 - PCIE Root Port Extended Sync - Enable/Disable PCIE Root Port Extended Sync. 0:Disable, 1:Enable(Default). -**/ - UINT8 PcieRpExtSync[6]; - -/** Offset 0x010D - Transmitter Half Swing - Transmitter Half Swing Enable/Disable. 0:Disable, 1:Enable(Default). -**/ - UINT8 PcieRpTransmitterHalfSwing[6]; - -/** Offset 0x0113 - ACS - Enable/Disable Access Control Services Extended Capability. 0:Disable, 1:Enable(Default). -**/ - UINT8 PcieRpAcsEnabled[6]; - -/** Offset 0x0119 - Clock Request Support - Enable/Disable CLKREQ# Support. 0:Disable, 1:Enable(Default). -**/ - UINT8 PcieRpClkReqSupported[6]; - -/** Offset 0x011F - Configure CLKREQ Number - Configure Root Port CLKREQ Number if CLKREQ is supported. Default=0x04, 0x05, 0x00, - 0x01, 0x02, 0x03. -**/ - UINT8 PcieRpClkReqNumber[6]; - -/** Offset 0x0125 - CLKREQ# Detection - Enable/Disable CLKREQ# Detection Probe. 0: Disable(Default), 1: Enable. -**/ - UINT8 PcieRpClkReqDetect[6]; - -/** Offset 0x012B - Advanced Error Reporting - Enable/Disable Advanced Error Reporting. 0: Disable(Default), 1: Enable. -**/ - UINT8 AdvancedErrorReporting[6]; - -/** Offset 0x0131 - PME Interrupt - Enable/Disable PME Interrupt. 0: Disable(Default), 1: Enable. -**/ - UINT8 PmeInterrupt[6]; - -/** Offset 0x0137 - URR - PCI Express Unsupported Request Reporting Enable/Disable. 0:Disable(Default), 1:Enable. -**/ - UINT8 UnsupportedRequestReport[6]; - -/** Offset 0x013D - FER - PCI Express Device Fatal Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable. -**/ - UINT8 FatalErrorReport[6]; - -/** Offset 0x0143 - NFER - PCI Express Device Non-Fatal Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable. -**/ - UINT8 NoFatalErrorReport[6]; - -/** Offset 0x0149 - CER - PCI Express Device Correctable Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable. -**/ - UINT8 CorrectableErrorReport[6]; - -/** Offset 0x014F - SEFE - Root PCI Express System Error on Fatal Error Enable/Disable. 0:Disable(Default), 1:Enable. -**/ - UINT8 SystemErrorOnFatalError[6]; - -/** Offset 0x0155 - SENFE - Root PCI Express System Error on Non-Fatal Error Enable/Disable. 0:Disable(Default), 1:Enable. -**/ - UINT8 SystemErrorOnNonFatalError[6]; - -/** Offset 0x015B - SECE - Root PCI Express System Error on Correctable Error Enable/Disable. 0:Disable(Default), 1:Enable. -**/ - UINT8 SystemErrorOnCorrectableError[6]; - -/** Offset 0x0161 - PCIe Speed - Configure PCIe Speed. 0:Auto(Default), 1:Gen1, 2:Gen2, 3:Gen3. -**/ - UINT8 PcieRpSpeed[6]; - -/** Offset 0x0167 - Physical Slot Number - Physical Slot Number for PCIE Root Port. Default=0x00, 0x01, 0x02, 0x03, 0x04, 0x05. -**/ - UINT8 PhysicalSlotNumber[6]; - -/** Offset 0x016D - CTO - Enable/Disable PCI Express Completion Timer TO . 0:Disable(Default), 1:Enable. -**/ - UINT8 PcieRpCompletionTimeout[6]; - -/** Offset 0x0173 - PTM Support - Enable/Disable PTM Support. 0:Disable(Default), 1:Enable. -**/ - UINT8 PtmEnable[6]; - -/** Offset 0x0179 - ASPM - PCI Express Active State Power Management settings. 0:Disable, 1:L0s, 2:L1, 3:L0sL1, - 4:Auto(Default). -**/ - UINT8 PcieRpAspm[6]; - -/** Offset 0x017F - L1 Substates - PCI Express L1 Substates settings. 0:Disable, 1:L1.1, 2:L1.2, 3:L1.1 & L1.2(Default). -**/ - UINT8 PcieRpL1Substates[6]; - -/** Offset 0x0185 - PCH PCIe LTR - PCH PCIE Latency Reporting Enable/Disable. 0:Disable, 1:Enable(Default). -**/ - UINT8 PcieRpLtrEnable[6]; - -/** Offset 0x018B - PCIE LTR Lock - PCIE LTR Configuration Lock. 0:Disable(Default), 1:Enable. -**/ - UINT8 PcieRpLtrConfigLock[6]; - -/** Offset 0x0191 - PME_B0_S5 Disable bit - PME_B0_S5_DIS bit in the General PM Configuration B (GEN_PMCON_B) register. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 PmeB0S5Dis; - -/** Offset 0x0192 - PCI Clock Run - This member describes whether or not the PCI ClockRun feature of SC should be enabled. - 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 PciClockRun; - -/** Offset 0x0193 - Enable/Disable Timer 8254 Clock Setting - Enable/Disable Timer 8254 Clock. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 Timer8254ClkSetting; - -/** Offset 0x0194 - Chipset SATA - Enables or Disables the Chipset SATA Controller. The Chipset SATA controller supports - the 2 black internal SATA ports (up to 3Gb/s supported per port). 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 EnableSata; - -/** Offset 0x0195 - SATA Mode Selection - Determines how SATA controller(s) operate. 0:AHCI(Default), 1:RAID. - 0:AHCI, 1:RAID -**/ - UINT8 SataMode; - -/** Offset 0x0196 - Aggressive LPM Support - Enable PCH to aggressively enter link power state. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 SataSalpSupport; - -/** Offset 0x0197 - SATA Power Optimization - Enable SATA Power Optimizer on SC side. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 SataPwrOptEnable; - -/** Offset 0x0198 - eSATA Speed Limit - Enable/Disable eSATA Speed Limit. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 eSATASpeedLimit; - -/** Offset 0x0199 - SATA Speed Limit - SATA Speed Limit. 0h:ScSataSpeed(Default), 1h:1.5Gb/s(Gen 1), 2h:3Gb/s(Gen 2), 3h:6Gb/s(Gen 3). - 0:Default, 1: 1.5 Gb/s (Gen 1), 2: 3 Gb/s(Gen 2), 3: 6 Gb/s (Gen 1) -**/ - UINT8 SpeedLimit; - -/** Offset 0x019A - SATA Port - Enable or Disable SATA Port. 0:Disable, 1:Enable(Default). -**/ - UINT8 SataPortsEnable[2]; - -/** Offset 0x019C - SATA Port DevSlp - Enable/Disable SATA Port DevSlp. Board rework for LP needed before enable. 0:Disable(Default), 1:Enable. -**/ - UINT8 SataPortsDevSlp[2]; - -/** Offset 0x019E - SATA Port HotPlug - Enable/Disable SATA Port Hotplug . 0:Disable(Default), 1:Enable. -**/ - UINT8 SataPortsHotPlug[2]; - -/** Offset 0x01A0 - Mechanical Presence Switch - Controls reporting if this port has an Mechanical Presence Switch.\n - Note:Requires hardware support. 0:Disable, 1:Enable(Default). -**/ - UINT8 SataPortsInterlockSw[2]; - -/** Offset 0x01A2 - External SATA Ports - Enable/Disable External SATA Ports. 0:Disable(Default), 1:Enable. -**/ - UINT8 SataPortsExternal[2]; - -/** Offset 0x01A4 - Spin Up Device - Enable/Disable device spin up at boot on selected Sata Ports. 0:Disable(Default), 1:Enable. -**/ - UINT8 SataPortsSpinUp[2]; - -/** Offset 0x01A6 - SATA Solid State - Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. 0:Hard - Disk Drive(Default), 1:Solid State Drive. -**/ - UINT8 SataPortsSolidStateDrive[2]; - -/** Offset 0x01A8 - DITO Configuration - Enable/Disable DITO Configuration. 0:Disable(Default), 1:Enable. -**/ - UINT8 SataPortsEnableDitoConfig[2]; - -/** Offset 0x01AA - DM Value - DM Value. 0:Minimum, 0x0F:Maximum(Default). -**/ - UINT8 SataPortsDmVal[2]; - -/** Offset 0x01AC - DITO Value - DEVSLP Idle Timeout Value. 0:Minimum, 0x03FF:Maximum, 0x0271(Default). -**/ - UINT16 SataPortsDitoVal[2]; - -/** Offset 0x01B0 - Subsystem Vendor ID - Subsystem Vendor ID. 0x8086(Default). -**/ - UINT16 SubSystemVendorId; - -/** Offset 0x01B2 - Subsystem ID - Subsystem ID. 0x7270(Default). -**/ - UINT16 SubSystemId; - -/** Offset 0x01B4 -**/ - UINT8 UnusedUpdSpace2[10]; - -/** Offset 0x01BE - CRIDSettings - PMC CRID setting. 0:Disable(Default), 1:CRID_1, 2:CRID_2, 3:CRID_3. -**/ - UINT8 CRIDSettings; - -/** Offset 0x01BF - ResetSelect - ResetSelect. 0x6:warm reset(Default), 0xE:cold reset. -**/ - UINT8 ResetSelect; - -/** Offset 0x01C0 - SD Card Support (D27:F0) - Enable/Disable SD Card Support. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 SdcardEnabled; - -/** Offset 0x01C1 - SeMMC Support (D28:F0) - Enable/Disable eMMC Support. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 eMMCEnabled; - -/** Offset 0x01C2 - eMMC Max Speed - Select the eMMC max Speed allowed. 0:HS400(Default), 1:HS200, 2:DDR50. - 0:HS400, 1: HS200, 2:DDR50 -**/ - UINT8 eMMCHostMaxSpeed; - -/** Offset 0x01C3 - UFS Support (D29:F0) - Enable/Disable SDIO Support. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 UfsEnabled; - -/** Offset 0x01C4 - SDIO Support (D30:F0) - Enable/Disable SDIO Support. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 SdioEnabled; - -/** Offset 0x01C5 - GPP Lock Feature - Enable/Disable GPP lock. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 GppLock; - -/** Offset 0x01C6 - Serial IRQ - Enable/Disable Serial IRQ. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 SirqEnable; - -/** Offset 0x01C7 - Serial IRQ Mode - Serial IRQ Mode Selection. 0:Quiet mode(Default), 1:Continuous mode. - $EN_DIS -**/ - UINT8 SirqMode; - -/** Offset 0x01C8 - Start Frame Pulse Width - Start Frame Pulse Width Value. 0:ScSfpw4Clk(Default), 1: ScSfpw6Clk, 2:ScSfpw8Clk. - 0:ScSfpw4Clk, 1:ScSfpw6Clk, 2:ScSfpw8Clk -**/ - UINT8 StartFramePulse; - -/** Offset 0x01C9 - Enable SMBus - Enable/disable SMBus controller. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 SmbusEnable; - -/** Offset 0x01CA - SMBus ARP Support - Enable/disable SMBus ARP Support. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 ArpEnable; - -/** Offset 0x01CB -**/ - UINT16 UnusedUpdSpace3; - -/** Offset 0x01CD - SMBus Table Elements - The number of elements in the Reserved SMBus Address Table. 0x0080(Default). -**/ - UINT16 NumRsvdSmbusAddresses; - -/** Offset 0x01CF - Reserved SMBus Address Table - Array of addresses reserved for non-ARP-capable SMBus devices. 0x00(Default). -**/ - UINT8 RsvdSmbusAddressTable[128]; - -/** Offset 0x024F - XHCI Disable Compliance Mode - Options to disable XHCI Link Compliance Mode. Default is FALSE to not disable Compliance - Mode. Set TRUE to disable Compliance Mode. 0:FALSE(Default), 1:True. - $EN_DIS -**/ - UINT8 DisableComplianceMode; - -/** Offset 0x0250 - USB Per-Port Control - Control each of the USB ports enable/disable. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 UsbPerPortCtl; - -/** Offset 0x0251 - xHCI Mode - Mode of operation of xHCI controller. 0:Disable, 1:Enable, 2:Auto(Default) - 0:Disable, 1:Enable, 2:Auto -**/ - UINT8 Usb30Mode; - -/** Offset 0x0252 - Enable USB2 ports - Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for - port1, and so on. 0x01(Default). -**/ - UINT8 PortUsb20Enable[8]; - -/** Offset 0x025A - USB20 Over Current Pin - Over Current Pin number of USB 2.0 Port. 0x00(Default). -**/ - UINT8 PortUs20bOverCurrentPin[8]; - -/** Offset 0x0262 - Enable USB3 ports - Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for - port1, and so on. 0x01(Default). -**/ - UINT8 PortUsb30Enable[6]; - -/** Offset 0x0268 - USB20 Over Current Pin - Over Current Pin number of USB 3.0 Port. 0x01(Default). -**/ - UINT8 PortUs30bOverCurrentPin[6]; - -/** Offset 0x026E - XDCI Support - Enable/Disable XDCI. 0:Disable, 1:PCI_Mode(Default), 2:ACPI_mode. - 0:Disable, 1:PCI_Mode, 2:ACPI_mode -**/ - UINT8 UsbOtg; - -/** Offset 0x026F - Enable XHCI HSIC Support - Enable/Disable USB HSIC1. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 HsicSupportEnable; - -/** Offset 0x0270 - Enable XHCI SSIC Support - Enable/disable XHCI SSIC ports. One byte for each port, byte0 for port0, byte1 for - port1. 0x00(Default). -**/ - UINT8 SsicPortEnable[2]; - -/** Offset 0x0272 - SSIC Dlane PowerGating - Enable/Disable SSIC Data lane Power Gating. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT16 DlanePwrGating; - -/** Offset 0x0274 - VT-d - Enable/Disable VT-d. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 VtdEnable; - -/** Offset 0x0275 - HDAudio Delay Timer - The delay timer after Azalia reset. 0x012C(Default). -**/ - UINT16 ResetWaitTimer; - -/** Offset 0x0277 - SMI Lock bit - Enable/Disable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. 0:Disable, - 1:Enable(Default). - $EN_DIS -**/ - UINT8 LockDownGlobalSmi; - -/** Offset 0x0278 - RTC Lock Bits - Enable/Disable RTC Lock Bits. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 RtcLock; - -/** Offset 0x0279 - XHCI SSIC RATE - Set XHCI SSIC1 Rate to A Series or B Series. 1:A Series(Default), 2:B Series. -**/ - UINT8 SsicRate[2]; - -/** Offset 0x027B - SATA Test Mode Selection - Enable/Disable SATA Test Mode. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT8 SataTestMode; - -/** Offset 0x027C - SMBus Dynamic Power Gating - Enable/Disable SMBus dynamic power gating. 0:Disable(Default), 1:Enable. - $EN_DIS -**/ - UINT16 DynamicPowerGating; - -/** Offset 0x027E - Max Snoop Latency - Latency Tolerance Reporting Max Snoop Latency. 0x0000(Default). -**/ - UINT16 PcieRpLtrMaxSnoopLatency[6]; - -/** Offset 0x028A - Snoop Latency Override - Snoop Latency Override for PCH PCIE. \n - Disabled:Disable override.\n - Manual:Manually enter override values.\n - Auto:Maintain default BIOS flow. 0:Disable, 1:Enable, 2:Auto(Default). -**/ - UINT8 PcieRpSnoopLatencyOverrideMode[6]; - -/** Offset 0x0290 - Snoop Latency Value - LTR Snoop Latency value of PCH PCIE. 0:Minimum, 0x03FF:Maximum, 0x003C(Default). -**/ - UINT16 PcieRpSnoopLatencyOverrideValue[6]; - -/** Offset 0x029C - Snoop Latency Multiplier - LTR Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default), 3:32768ns, - 4:1048576ns, 5:33554432ns. -**/ - UINT8 PcieRpSnoopLatencyOverrideMultiplier[6]; - -/** Offset 0x02A2 - Max Non-Snoop Latency - Latency Tolerance Reporting, Max Non-Snoop Latency. 0x0000(Default). -**/ - UINT16 PcieRpLtrMaxNonSnoopLatency[6]; - -/** Offset 0x02AE - Non Snoop Latency Override - Non Snoop Latency Override for PCH PCIE. \n - Disabled:Disable override.\n - Manual:Manually enter override values.\n - Auto: Maintain default BIOS flow. 0:Disable, 1:Enable, 2:Auto(Default). -**/ - UINT8 PcieRpNonSnoopLatencyOverrideMode[6]; - -/** Offset 0x02B4 - Non Snoop Latency Value - LTR Non Snoop Latency value of PCH PCIE. 0:Minimum, 0x03FF:Maximum, 0x003C(Default). -**/ - UINT16 PcieRpNonSnoopLatencyOverrideValue[6]; - -/** Offset 0x02C0 - Non Snoop Latency Multiplier - LTR Non Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default), - 3:32768ns, 4:1048576ns, 5:33554432ns. -**/ - UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[6]; - -/** Offset 0x02C6 - PCIE Root Port Slot Power Limit Scale - Specifies scale used for slot power limit value. 0x00(Default). -**/ - UINT8 PcieRpSlotPowerLimitScale[6]; - -/** Offset 0x02CC - PCIE Root Port Slot Power Limit Value - Specifies upper limit on power supplie by slot. 0x00(Default). -**/ - UINT8 PcieRpSlotPowerLimitValue[6]; - -/** Offset 0x02D2 - Skip Multi-Processor Initialization - When this is skipped, boot loader must initialize processors before SilicionInit - API. 0: Initialize(Default), <b>1: Skip - $EN_DIS -**/ - UINT8 SkipMpInit; - -/** Offset 0x02D3 - DCI Auto Detect - Enable/disable DCI AUTO mode. Enabled(Default). - $EN_DIS -**/ - UINT8 DciAutoDetect; - -/** Offset 0x02D4 - Halt and Lock TCO Timer - Halt and Lock the TCO Timer (Watchdog). - 0:No, 1:Yes (default) -**/ - UINT8 TcoTimerHaltLock; - -/** Offset 0x02D5 - Power Button Override Period - specifies how long will PMC wait before initiating a global reset. 000b-4s(default), - 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.) - 0x0:4s, 0x1:6s, 0x2:8s, 0x3:10s, 0x4:12s, 0x5:14s -**/ - UINT8 PwrBtnOverridePeriod; - -/** Offset 0x02D6 - Power Button Native Mode Disable - Disable power button native mode, when 1, this will result in the PMC logic constantly - seeing the power button as de-asserted. 0 (default)) - $EN_DIS -**/ - UINT8 DisableNativePowerButton; - -/** Offset 0x02D7 - Power Button Debounce Mode - Enable interrupt when PWRBTN# is asserted. 0:Disabled, 1:Enabled(default) - $EN_DIS -**/ - UINT8 PowerButterDebounceMode; - -/** Offset 0x02D8 - SDIO_TX_CMD_DLL_CNTL - SDIO_TX_CMD_DLL_CNTL. 0x505(Default). -**/ - UINT32 SdioTxCmdCntl; - -/** Offset 0x02DC - SDIO_TX_DATA_DLL_CNTL1 - SDIO_TX_DATA_DLL_CNTL1. 0xE(Default). -**/ - UINT32 SdioTxDataCntl1; - -/** Offset 0x02E0 - SDIO_TX_DATA_DLL_CNTL2 - SDIO_TX_DATA_DLL_CNTL2. 0x22272828(Default). -**/ - UINT32 SdioTxDataCntl2; - -/** Offset 0x02E4 - SDIO_RX_CMD_DATA_DLL_CNTL1 - SDIO_RX_CMD_DATA_DLL_CNTL1. 0x16161616(Default). -**/ - UINT32 SdioRxCmdDataCntl1; - -/** Offset 0x02E8 - SDIO_RX_CMD_DATA_DLL_CNTL2 - SDIO_RX_CMD_DATA_DLL_CNTL2. 0x10000(Default). -**/ - UINT32 SdioRxCmdDataCntl2; - -/** Offset 0x02EC - SDCARD_TX_CMD_DLL_CNTL - SDCARD_TX_CMD_DLL_CNTL. 0x505(Default). -**/ - UINT32 SdcardTxCmdCntl; - -/** Offset 0x02F0 - SDCARD_TX_DATA_DLL_CNTL1 - SDCARD_TX_DATA_DLL_CNTL1. 0xA13(Default). -**/ - UINT32 SdcardTxDataCntl1; - -/** Offset 0x02F4 - SDCARD_TX_DATA_DLL_CNTL2 - SDCARD_TX_DATA_DLL_CNTL2. 0x24242828(Default). -**/ - UINT32 SdcardTxDataCntl2; - -/** Offset 0x02F8 - SDCARD_RX_CMD_DATA_DLL_CNTL1 - SDCARD_RX_CMD_DATA_DLL_CNTL1. 0x73A3637(Default). -**/ - UINT32 SdcardRxCmdDataCntl1; - -/** Offset 0x02FC - SDCARD_RX_STROBE_DLL_CNTL - SDCARD_RX_STROBE_DLL_CNTL. 0x0(Default). -**/ - UINT32 SdcardRxStrobeCntl; - -/** Offset 0x0300 - SDCARD_RX_CMD_DATA_DLL_CNTL2 - SDCARD_RX_CMD_DATA_DLL_CNTL2. 0x10000(Default). -**/ - UINT32 SdcardRxCmdDataCntl2; - -/** Offset 0x0304 - EMMC_TX_CMD_DLL_CNTL - EMMC_TX_CMD_DLL_CNTL. 0x505(Default). -**/ - UINT32 EmmcTxCmdCntl; - -/** Offset 0x0308 - EMMC_TX_DATA_DLL_CNTL1 - EMMC_TX_DATA_DLL_CNTL1. 0xC11(Default). -**/ - UINT32 EmmcTxDataCntl1; - -/** Offset 0x030C - EMMC_TX_DATA_DLL_CNTL2 - EMMC_TX_DATA_DLL_CNTL2. 0x1C2A2927(Default). -**/ - UINT32 EmmcTxDataCntl2; - -/** Offset 0x0310 - EMMC_RX_CMD_DATA_DLL_CNTL1 - EMMC_RX_CMD_DATA_DLL_CNTL1. 0x000D162F(Default). -**/ - UINT32 EmmcRxCmdDataCntl1; - -/** Offset 0x0314 - EMMC_RX_STROBE_DLL_CNTL - EMMC_RX_STROBE_DLL_CNTL. 0x0a0a(Default). -**/ - UINT32 EmmcRxStrobeCntl; - -/** Offset 0x0318 - EMMC_RX_CMD_DATA_DLL_CNTL2 - EMMC_RX_CMD_DATA_DLL_CNTL2. 0x1003b(Default). -**/ - UINT32 EmmcRxCmdDataCntl2; - -/** Offset 0x031C - EMMC_MASTER_DLL_CNTL - EMMC_MASTER_DLL_CNTL. 0x001(Default). -**/ - UINT32 EmmcMasterSwCntl; - -/** Offset 0x0320 - PCIe Selectable De-emphasis - When the Link is operating at 5.0 GT/s speed, this bit selects the level of de-emphasis - for an Upstream component. 1b:-3.5 dB 0b:-6 dB. 0:Disable, 1:Enable(Default). -**/ - UINT8 PcieRpSelectableDeemphasis[6]; - -/** Offset 0x0326 -**/ - UINT8 UnusedUpdSpace4; - -/** Offset 0x0327 - Monitor Mwait Enable - Enable/Disable Monitor Mwait. For Windows* OS, this should be Enabled. For Linux - based OS, this should be Disabled. 0:Disable, 1:Enable(Default). - $EN_DIS -**/ - UINT8 MonitorMwaitEnable; - -/** Offset 0x0328 -**/ - UINT8 ReservedFspsUpd[8]; -} FSP_S_CONFIG; - -/** Fsp S Test Configuration -**/ -typedef struct { - -/** Offset 0x0330 -**/ - UINT32 Signature; - -/** Offset 0x0334 -**/ - UINT8 ReservedFspsTestUpd[12]; -} FSP_S_TEST_CONFIG; - -/** Fsp S Restricted Configuration -**/ -typedef struct { - -/** Offset 0x0340 -**/ - UINT32 Signature; - -/** Offset 0x0344 -**/ - UINT8 ReservedFspsRestrictedUpd[12]; -} FSP_S_RESTRICTED_CONFIG; - -/** Fsp S UPD Configuration -**/ -typedef struct { - -/** Offset 0x0000 -**/ - FSP_UPD_HEADER FspUpdHeader; - -/** Offset 0x0020 -**/ - FSP_S_CONFIG FspsConfig; - -/** Offset 0x0330 -**/ - FSP_S_TEST_CONFIG FspsTestConfig; - -/** Offset 0x0340 -**/ - FSP_S_RESTRICTED_CONFIG FspsRestrictedConfig; - -/** Offset 0x0350 -**/ - UINT16 UpdTerminator; -} FSPS_UPD; - -#pragma pack(pop) - -#endif |