diff options
Diffstat (limited to 'src/soc/intel')
-rw-r--r-- | src/soc/intel/common/block/sata/Kconfig | 10 | ||||
-rw-r--r-- | src/soc/intel/common/block/sata/sata.c | 17 |
2 files changed, 20 insertions, 7 deletions
diff --git a/src/soc/intel/common/block/sata/Kconfig b/src/soc/intel/common/block/sata/Kconfig index 6b24f595c4..98ff6967c9 100644 --- a/src/soc/intel/common/block/sata/Kconfig +++ b/src/soc/intel/common/block/sata/Kconfig @@ -2,3 +2,13 @@ config SOC_INTEL_COMMON_BLOCK_SATA bool help Intel Processor common SATA support + +config SOC_AHCI_PORT_IMPLEMENTED_INVERT + depends on SOC_INTEL_COMMON_BLOCK_SATA + bool + help + SATA PCI configuration space offset 0x92 Port + implement register bit 0-2 represents respective + SATA port enable status as in 0 = Disable; 1 = Enable. + If this option is selected then port enable status will be + inverted as in 0 = Enable; 1 = Disable. diff --git a/src/soc/intel/common/block/sata/sata.c b/src/soc/intel/common/block/sata/sata.c index 791510eda3..cabe89569a 100644 --- a/src/soc/intel/common/block/sata/sata.c +++ b/src/soc/intel/common/block/sata/sata.c @@ -22,10 +22,9 @@ #define SATA_ABAR_PORT_IMPLEMENTED 0x0c #define SATA_PCI_CFG_PORT_CTL_STS 0x92 -static void *get_ahci_bar(void) +static void *sata_get_ahci_bar(struct device *dev) { uintptr_t bar; - device_t dev = PCH_DEV_SATA; bar = pci_read_config32(dev, PCI_BASE_ADDRESS_5); return (void *)(bar & ~PCI_BASE_ADDRESS_MEM_ATTR_MASK); @@ -39,19 +38,23 @@ static void *get_ahci_bar(void) * and can detect devices. When disabled, the port is in the off state and * can't detect any devices. */ -static void sata_final(device_t dev) +static void sata_final(struct device *dev) { - void *ahcibar = get_ahci_bar(); + void *ahcibar = sata_get_ahci_bar(dev); u32 port_impl, temp; - dev = PCH_DEV_SATA; - /* Set Bus Master */ temp = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, temp | PCI_COMMAND_MASTER); /* Read Ports Implemented (GHC_PI) */ - port_impl = read32(ahcibar + SATA_ABAR_PORT_IMPLEMENTED) & 0x07; + port_impl = read32(ahcibar + SATA_ABAR_PORT_IMPLEMENTED); + + if (IS_ENABLED(CONFIG_SOC_AHCI_PORT_IMPLEMENTED_INVERT)) + port_impl = ~port_impl; + + port_impl &= 0x07; /* bit 0-2 */ + /* Port enable */ temp = pci_read_config32(dev, SATA_PCI_CFG_PORT_CTL_STS); temp |= port_impl; |