diff options
Diffstat (limited to 'src/soc/intel')
| -rw-r--r-- | src/soc/intel/apollolake/gpio.c | 23 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/include/soc/gpio.h | 8 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/include/soc/gpio_defs.h | 11 |
3 files changed, 42 insertions, 0 deletions
diff --git a/src/soc/intel/apollolake/gpio.c b/src/soc/intel/apollolake/gpio.c index 2d325255e7..8ac00cde36 100644 --- a/src/soc/intel/apollolake/gpio.c +++ b/src/soc/intel/apollolake/gpio.c @@ -83,6 +83,27 @@ static void gpio_configure_itss(const struct pad_config *cfg, itss_set_irq_polarity(irq, !!(cfg->config0 & PAD_CFG0_RX_POL_INVERT)); } +static void gpio_configure_owner(const struct pad_config *cfg, + uint16_t port, int pin) +{ + uint32_t val; + uint16_t hostsw_reg; + + /* The 4th bit in pad_config 1 (RO) is used to indicate if the pad + * needs GPIO driver ownership. + */ + if (!(cfg->config1 & PAD_CFG1_GPIO_DRIVER)) + return; + + /* Based on the gpio pin number configure the corresponding bit in + * HOSTSW_OWN register. Value of 0x1 indicates GPIO Driver onwership. + */ + hostsw_reg = HOSTSW_OWN_REG_BASE + ((pin / 32) * sizeof(uint32_t)); + val = iosf_read(port, hostsw_reg); + val |= 1 << (pin % 32); + iosf_write(port, hostsw_reg, val); +} + void gpio_configure_pad(const struct pad_config *cfg) { uint32_t dw1; @@ -100,6 +121,8 @@ void gpio_configure_pad(const struct pad_config *cfg) iosf_write(comm->port, config_offset + sizeof(uint32_t), dw1); gpio_configure_itss(cfg, comm->port, config_offset); + gpio_configure_owner(cfg, comm->port, cfg->pad - comm->first_pad); + } void gpio_configure_pads(const struct pad_config *cfg, size_t num_pads) diff --git a/src/soc/intel/apollolake/include/soc/gpio.h b/src/soc/intel/apollolake/include/soc/gpio.h index fc2401d165..8ef74bb70a 100644 --- a/src/soc/intel/apollolake/include/soc/gpio.h +++ b/src/soc/intel/apollolake/include/soc/gpio.h @@ -63,6 +63,14 @@ typedef uint32_t gpio_t; PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \ PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE)) +/* General purpose input. The following macro sets the + * Host Software Pad Ownership to GPIO Driver mode. + */ +#define PAD_CFG_GPI_GPIO_DRIVER(pad, pull, rst) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \ + PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TxLASTRxE)) + /* No Connect configuration for unused pad. * NC should be GPI with Term as PU20K, PD20K, NONE depending upon default Term */ diff --git a/src/soc/intel/apollolake/include/soc/gpio_defs.h b/src/soc/intel/apollolake/include/soc/gpio_defs.h index 0a9fb151ea..d85f844823 100644 --- a/src/soc/intel/apollolake/include/soc/gpio_defs.h +++ b/src/soc/intel/apollolake/include/soc/gpio_defs.h @@ -45,6 +45,12 @@ #define MISCCFG_GPE0_DW2_SHIFT 16 #define MISCCFG_GPE0_DW2_MASK (0xf << MISCCFG_GPE0_DW2_SHIFT) +/* Host Software Pad Ownership Register. + * The pins in the community are divided into 3 groups : + * GPIO 0 ~ 31, GPIO 32 ~ 63, GPIO 64 ~ 95 + */ +#define HOSTSW_OWN_REG_BASE 0x80 + #define PAD_CFG0_TX_STATE (1 << 0) #define PAD_CFG0_RX_STATE (1 << 1) #define PAD_CFG0_TX_DISABLE (1 << 8) @@ -75,6 +81,11 @@ #define PAD_CFG0_RESET_PLTRST (2 << 30) #define PAD_CFG0_RESET_RSMRST (3 << 30) +/* Use the fourth bit in IntSel field to indicate gpio + * ownership. This field is RO and hence not used during + * gpio configuration. + */ +#define PAD_CFG1_GPIO_DRIVER (0x1 << 4) #define PAD_CFG1_IRQ_MASK (0xff << 0) #define PAD_CFG1_PULL_MASK (0xf << 10) #define PAD_CFG1_PULL_NONE (0x0 << 10) |