summaryrefslogtreecommitdiff
path: root/src/soc/intel
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/intel')
-rw-r--r--src/soc/intel/alderlake/acpi/xhci.asl47
-rw-r--r--src/soc/intel/alderlake/chip.h1
-rw-r--r--src/soc/intel/alderlake/include/soc/usb.h7
-rw-r--r--src/soc/intel/cannonlake/acpi/xhci.asl47
-rw-r--r--src/soc/intel/cannonlake/chip.h1
-rw-r--r--src/soc/intel/cannonlake/include/soc/usb.h7
-rw-r--r--src/soc/intel/common/acpi/xhci_wake.asl49
-rw-r--r--src/soc/intel/common/block/include/intelblocks/xhci.h7
-rw-r--r--src/soc/intel/skylake/acpi/xhci.asl47
-rw-r--r--src/soc/intel/skylake/chip.h1
-rw-r--r--src/soc/intel/skylake/include/soc/usb.h7
11 files changed, 65 insertions, 156 deletions
diff --git a/src/soc/intel/alderlake/acpi/xhci.asl b/src/soc/intel/alderlake/acpi/xhci.asl
index e4001fe8c2..1c3bbbe2da 100644
--- a/src/soc/intel/alderlake/acpi/xhci.asl
+++ b/src/soc/intel/alderlake/acpi/xhci.asl
@@ -3,51 +3,8 @@
#include <intelblocks/xhci.h>
#include <soc/gpe.h>
-/*
- * USB Port Wake Enable (UPWE) on usb attach/detach
- * Arg0 - Port Number
- * Arg1 - Port 1 Status and control offset
- * Arg2 - xHCI Memory-mapped address
- */
-Method (UPWE, 3, Serialized)
-{
- Local0 = Arg1 + ((Arg0 - 1) * 0x10)
-
- /* Map ((XMEM << 16) + Local0 in PSCR */
- OperationRegion (PSCR, SystemMemory, (Arg2 << 16) + Local0, 0x10)
- Field (PSCR, DWordAcc, NoLock, Preserve)
- {
- PSCT, 32,
- }
- Local0 = PSCT
- Local0 &= PORTSCN_BITS_OFF_MASK
- Local0 |= PORTSCN_WAKE_ON_BOTH_CONNECT_DISCONNECT_ENABLE
- PSCT = Local0
-}
-
-/*
- * USB Wake Enable Setup (UWES)
- * Arg0 - Port enable bitmap
- * Arg1 - Port 1 Status and control offset
- * Arg2 - xHCI Memory-mapped address
- */
-Method (UWES, 3, Serialized)
-{
- Local0 = Arg0
-
- While (1) {
- FindSetRightBit (Local0, Local1)
- If (Local1 == 0) {
- Break
- }
- UPWE (Local1, Arg1, Arg2)
- /*
- * Clear the lowest set bit in Local0 since it was
- * processed.
- */
- Local0 &= (Local0 - 1)
- }
-}
+/* Include UWES method for enabling USB wake */
+#include <soc/intel/common/acpi/xhci_wake.asl>
/* XHCI Controller 0:14.0 */
diff --git a/src/soc/intel/alderlake/chip.h b/src/soc/intel/alderlake/chip.h
index 65d6e85cb0..b1e90fa774 100644
--- a/src/soc/intel/alderlake/chip.h
+++ b/src/soc/intel/alderlake/chip.h
@@ -12,6 +12,7 @@
#include <intelblocks/power_limit.h>
#include <intelblocks/pcie_rp.h>
#include <intelblocks/tcss.h>
+#include <intelblocks/xhci.h>
#include <soc/gpe.h>
#include <soc/pci_devs.h>
#include <soc/pmc.h>
diff --git a/src/soc/intel/alderlake/include/soc/usb.h b/src/soc/intel/alderlake/include/soc/usb.h
index 2a701c8cc2..b84cce7a66 100644
--- a/src/soc/intel/alderlake/include/soc/usb.h
+++ b/src/soc/intel/alderlake/include/soc/usb.h
@@ -163,11 +163,4 @@ struct tcss_port_config {
.ocpin = (pin), \
}
-/*
- * Set bit corresponding to USB port in wake enable bitmap. Bit 0 corresponds
- * to Port 1, Bit n corresponds to Port (n+1). This bitmap is later used to
- * decide what ports need to set PORTSCN/PORTSCXUSB3 register bits.
- */
-#define USB_PORT_WAKE_ENABLE(x) (1 << ((x) - 1))
-
#endif
diff --git a/src/soc/intel/cannonlake/acpi/xhci.asl b/src/soc/intel/cannonlake/acpi/xhci.asl
index 0f8f51fe20..beaa843911 100644
--- a/src/soc/intel/cannonlake/acpi/xhci.asl
+++ b/src/soc/intel/cannonlake/acpi/xhci.asl
@@ -3,51 +3,8 @@
#include <intelblocks/xhci.h>
#include <soc/gpe.h>
-/*
- * USB Port Wake Enable (UPWE) on usb attach/detach
- * Arg0 - Port Number
- * Arg1 - Port 1 Status and control offset
- * Arg2 - xHCI Memory-mapped address
- */
-Method (UPWE, 3, Serialized)
-{
- Local0 = Arg1 + ((Arg0 - 1) * 0x10)
-
- /* Map ((XMEM << 16) + Local0 in PSCR */
- OperationRegion (PSCR, SystemMemory, (Arg2 << 16) + Local0, 0x10)
- Field (PSCR, DWordAcc, NoLock, Preserve)
- {
- PSCT, 32,
- }
- Local0 = PSCT
- Local0 = Local0 & PORTSCN_BITS_OFF_MASK
- Local0 = Local0 | PORTSCN_WAKE_ON_BOTH_CONNECT_DISCONNECT_ENABLE
- PSCT = Local0
-}
-
-/*
- * USB Wake Enable Setup (UWES)
- * Arg0 - Port enable bitmap
- * Arg1 - Port 1 Status and control offset
- * Arg2 - xHCI Memory-mapped address
- */
-Method (UWES, 3, Serialized)
-{
- Local0 = Arg0
-
- While (1) {
- FindSetRightBit (Local0, Local1)
- If (Local1 == 0) {
- Break
- }
- UPWE (Local1, Arg1, Arg2)
- /*
- * Clear the lowest set bit in Local0 since it was
- * processed.
- */
- Local0 = Local0 & (Local0 - 1)
- }
-}
+/* Include UWES method for enabling USB wake */
+#include <soc/intel/common/acpi/xhci_wake.asl>
/* XHCI Controller 0:14.0 */
diff --git a/src/soc/intel/cannonlake/chip.h b/src/soc/intel/cannonlake/chip.h
index 30930502c1..994f2aebef 100644
--- a/src/soc/intel/cannonlake/chip.h
+++ b/src/soc/intel/cannonlake/chip.h
@@ -10,6 +10,7 @@
#include <intelblocks/gspi.h>
#include <intelblocks/lpc_lib.h>
#include <intelblocks/power_limit.h>
+#include <intelblocks/xhci.h>
#include <stdbool.h>
#include <stdint.h>
#include <soc/pch.h>
diff --git a/src/soc/intel/cannonlake/include/soc/usb.h b/src/soc/intel/cannonlake/include/soc/usb.h
index 20b3149dd7..3f020ef7c1 100644
--- a/src/soc/intel/cannonlake/include/soc/usb.h
+++ b/src/soc/intel/cannonlake/include/soc/usb.h
@@ -186,11 +186,4 @@ struct usb3_port_config {
.gen2_rx_filter_sel = 0x44, \
}
-/*
- * Set bit corresponding to USB port in wake enable bitmap. Bit 0 corresponds
- * to Port 1, Bit n corresponds to Port (n+1). This bitmap is later used to
- * decide what ports need to set PORTSCN/PORTSCXUSB3 register bits.
- */
-#define USB_PORT_WAKE_ENABLE(x) (1 << ((x) - 1))
-
#endif
diff --git a/src/soc/intel/common/acpi/xhci_wake.asl b/src/soc/intel/common/acpi/xhci_wake.asl
new file mode 100644
index 0000000000..e029a6f05c
--- /dev/null
+++ b/src/soc/intel/common/acpi/xhci_wake.asl
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <intelblocks/xhci.h>
+
+/*
+ * USB Port Wake Enable (UPWE) on usb attach/detach
+ * Arg0 - Port Number
+ * Arg1 - Port 1 Status and control offset
+ * Arg2 - xHCI Memory-mapped address
+ */
+Method (UPWE, 3, Serialized)
+{
+ Local0 = Arg1 + ((Arg0 - 1) * 0x10)
+
+ /* Map ((XMEM << 16) + Local0 in PSCR */
+ OperationRegion (PSCR, SystemMemory, (Arg2 << 16) + Local0, 0x10)
+ Field (PSCR, DWordAcc, NoLock, Preserve)
+ {
+ PSCT, 32,
+ }
+ Local0 = PSCT
+ Local0 &= PORTSCN_BITS_OFF_MASK
+ Local0 |= PORTSCN_WAKE_ON_BOTH_CONNECT_DISCONNECT_ENABLE
+ PSCT = Local0
+}
+
+/*
+ * USB Wake Enable Setup (UWES)
+ * Arg0 - Port enable bitmap
+ * Arg1 - Port 1 Status and control offset
+ * Arg2 - xHCI Memory-mapped address
+ */
+Method (UWES, 3, Serialized)
+{
+ Local0 = Arg0
+
+ While (1) {
+ FindSetRightBit (Local0, Local1)
+ If (Local1 == 0) {
+ Break
+ }
+ UPWE (Local1, Arg1, Arg2)
+ /*
+ * Clear the lowest set bit in Local0 since it was
+ * processed.
+ */
+ Local0 &= (Local0 - 1)
+ }
+}
diff --git a/src/soc/intel/common/block/include/intelblocks/xhci.h b/src/soc/intel/common/block/include/intelblocks/xhci.h
index 15b16d2073..1a72e0fee8 100644
--- a/src/soc/intel/common/block/include/intelblocks/xhci.h
+++ b/src/soc/intel/common/block/include/intelblocks/xhci.h
@@ -16,6 +16,13 @@
#define PORTSCN_BITS_OFF_MASK ~0x80FE0012
#define PORTSCXUSB3_OFFSET 0x540
+/*
+ * Set bit corresponding to USB port in wake enable bitmap. Bit 0 corresponds
+ * to Port 1, Bit n corresponds to Port (n+1). This bitmap is later used to
+ * decide what ports need to set PORTSCN/PORTSCXUSB3 register bits.
+ */
+#define USB_PORT_WAKE_ENABLE(x) (1 << ((x) - 1))
+
#if !defined(__ACPI__)
#include <device/device.h>
#include <device/xhci.h>
diff --git a/src/soc/intel/skylake/acpi/xhci.asl b/src/soc/intel/skylake/acpi/xhci.asl
index 0540919e37..bfe6c6df77 100644
--- a/src/soc/intel/skylake/acpi/xhci.asl
+++ b/src/soc/intel/skylake/acpi/xhci.asl
@@ -2,51 +2,8 @@
#include <intelblocks/xhci.h>
-/*
- * USB Port Wake Enable (UPWE) on usb attach/detach
- * Arg0 - Port Number
- * Arg1 - Port 1 Status and control offset
- * Arg2 - xHCI Memory-mapped address
- */
-Method (UPWE, 3, Serialized)
-{
- Local0 = Arg1 + ((Arg0 - 1) * 0x10)
-
- /* Map ((XMEM << 16) + Local0 in PSCR */
- OperationRegion (PSCR, SystemMemory, (Arg2 << 16) + Local0, 0x10)
- Field (PSCR, DWordAcc, NoLock, Preserve)
- {
- PSCT, 32,
- }
- Local0 = PSCT
- Local0 = Local0 & PORTSCN_BITS_OFF_MASK
- Local0 = Local0 | PORTSCN_WAKE_ON_BOTH_CONNECT_DISCONNECT_ENABLE
- PSCT = Local0
-}
-
-/*
- * USB Wake Enable Setup (UWES)
- * Arg0 - Port enable bitmap
- * Arg1 - Port 1 Status and control offset
- * Arg2 - xHCI Memory-mapped address
- */
-Method (UWES, 3, Serialized)
-{
- Local0 = Arg0
-
- While (1) {
- FindSetRightBit (Local0, Local1)
- If (Local1 == 0) {
- Break
- }
- UPWE (Local1, Arg1, Arg2)
- /*
- * Clear the lowest set bit in Local0 since it was
- * processed.
- */
- Local0 = Local0 & (Local0 - 1)
- }
-}
+/* Include UWES method for enabling USB wake */
+#include <soc/intel/common/acpi/xhci_wake.asl>
/* XHCI Controller 0:14.0 */
diff --git a/src/soc/intel/skylake/chip.h b/src/soc/intel/skylake/chip.h
index 5119037f6a..3070c462ba 100644
--- a/src/soc/intel/skylake/chip.h
+++ b/src/soc/intel/skylake/chip.h
@@ -12,6 +12,7 @@
#include <intelblocks/gspi.h>
#include <intelblocks/lpc_lib.h>
#include <intelblocks/power_limit.h>
+#include <intelblocks/xhci.h>
#include <stdbool.h>
#include <stdint.h>
#include <soc/gpe.h>
diff --git a/src/soc/intel/skylake/include/soc/usb.h b/src/soc/intel/skylake/include/soc/usb.h
index 79126037c5..612ad5fa2e 100644
--- a/src/soc/intel/skylake/include/soc/usb.h
+++ b/src/soc/intel/skylake/include/soc/usb.h
@@ -180,11 +180,4 @@ struct usb3_port_config {
.tx_downscale_amp = 0x00, \
}
-/*
- * Set bit corresponding to USB port in wake enable bitmap. Bit 0 corresponds
- * to Port 1, Bit n corresponds to Port (n+1). This bitmap is later used to
- * decide what ports need to set PORTSCN/PORTSCXUSB3 register bits.
- */
-#define USB_PORT_WAKE_ENABLE(x) (1 << ((x) - 1))
-
#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 17:07:07 +0000