diff options
Diffstat (limited to 'src/soc/intel/tigerlake/Kconfig')
-rw-r--r-- | src/soc/intel/tigerlake/Kconfig | 213 |
1 files changed, 213 insertions, 0 deletions
diff --git a/src/soc/intel/tigerlake/Kconfig b/src/soc/intel/tigerlake/Kconfig new file mode 100644 index 0000000000..014606b882 --- /dev/null +++ b/src/soc/intel/tigerlake/Kconfig @@ -0,0 +1,213 @@ +config SOC_INTEL_TIGERLAKE + bool + help + Intel Tigerlake support + +if SOC_INTEL_TIGERLAKE + +config CPU_SPECIFIC_OPTIONS + def_bool y + select ACPI_INTEL_HARDWARE_SLEEP_VALUES + select ARCH_BOOTBLOCK_X86_32 + select ARCH_RAMSTAGE_X86_32 + select ARCH_ROMSTAGE_X86_32 + select ARCH_VERSTAGE_X86_32 + select BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY if BOOT_DEVICE_SPI_FLASH + select BOOT_DEVICE_SUPPORTS_WRITES + select C_ENVIRONMENT_BOOTBLOCK + select CACHE_MRC_SETTINGS + select COMMON_FADT + select CPU_INTEL_FIRMWARE_INTERFACE_TABLE + select FSP_M_XIP + select GENERIC_GPIO_LIB + select HAVE_FSP_GOP + select INTEL_DESCRIPTOR_MODE_CAPABLE + select HAVE_SMI_HANDLER + select IDT_IN_EVERY_STAGE + select INTEL_GMA_ACPI + select INTEL_GMA_ADD_VBT if RUN_FSP_GOP + select IOAPIC + select MRC_SETTINGS_PROTECT + select PARALLEL_MP + select PARALLEL_MP_AP_WORK + select MICROCODE_BLOB_UNDISCLOSED + select PLATFORM_USES_FSP2_1 + select REG_SCRIPT + select SMP + select SOC_AHCI_PORT_IMPLEMENTED_INVERT + select PMC_GLOBAL_RESET_ENABLE_LOCK + select SOC_INTEL_COMMON + select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE + select SOC_INTEL_COMMON_BLOCK + select SOC_INTEL_COMMON_BLOCK_ACPI + select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG + select SOC_INTEL_COMMON_BLOCK_CPU + select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT + select SOC_INTEL_COMMON_BLOCK_EBDA + select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2 + select SOC_INTEL_COMMON_BLOCK_HDA + select SOC_INTEL_COMMON_BLOCK_SA + select SOC_INTEL_COMMON_BLOCK_SMM + select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP + select SOC_INTEL_COMMON_PCH_BASE + select SOC_INTEL_COMMON_RESET + select SSE2 + select SUPPORT_CPU_UCODE_IN_CBFS + select TSC_MONOTONIC_TIMER + select UDELAY_TSC + select UDK_2017_BINDING + select DISPLAY_FSP_VERSION_INFO + select HECI_DISABLE_USING_SMM + +config DCACHE_RAM_BASE + default 0xfef00000 + +config DCACHE_RAM_SIZE + default 0x40000 + help + The size of the cache-as-ram region required during bootblock + and/or romstage. + +config DCACHE_BSP_STACK_SIZE + hex + default 0x20400 + help + The amount of anticipated stack usage in CAR by bootblock and + other stages. In the case of FSP_USES_CB_STACK default value will be + sum of FSP-M stack requirement (128KiB) and CB romstage stack requirement (~1KiB). + +config FSP_TEMP_RAM_SIZE + hex + default 0x10000 + help + The amount of anticipated heap usage in CAR by FSP. + Refer to Platform FSP integration guide document to know + the exact FSP requirement for Heap setup. + +config IFD_CHIPSET + string + default "tgl" + +config IED_REGION_SIZE + hex + default 0x400000 + +config HEAP_SIZE + hex + default 0x8000 + +config MAX_ROOT_PORTS + int + default 16 + +config SMM_TSEG_SIZE + hex + default 0x800000 + +config SMM_RESERVED_SIZE + hex + default 0x200000 + +config PCR_BASE_ADDRESS + hex + default 0xfd000000 + help + This option allows you to select MMIO Base Address of sideband bus. + +config MMCONF_BASE_ADDRESS + hex + default 0xc0000000 + +config CPU_BCLK_MHZ + int + default 100 + +config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ + int + default 120 + +config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ + int + default 133 + +config SOC_INTEL_COMMON_BLOCK_GSPI_MAX + int + default 3 + +config SOC_INTEL_I2C_DEV_MAX + int + default 6 + +config SOC_INTEL_UART_DEV_MAX + int + default 3 + +config CONSOLE_UART_BASE_ADDRESS + hex + default 0xfe032000 + depends on INTEL_LPSS_UART_FOR_CONSOLE + +# Clock divider parameters for 115200 baud rate +config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL + hex + default 0x30 + +config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL + hex + default 0xc35 + +config CHROMEOS + select CHROMEOS_RAMOOPS_DYNAMIC + +config VBOOT + select VBOOT_SEPARATE_VERSTAGE + select VBOOT_MUST_REQUEST_DISPLAY + select VBOOT_SAVE_RECOVERY_REASON_ON_REBOOT + select VBOOT_STARTS_IN_BOOTBLOCK + select VBOOT_VBNV_CMOS + select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH + +config C_ENV_BOOTBLOCK_SIZE + hex + default 0xC000 + +config CBFS_SIZE + hex + default 0x200000 + +choice + prompt "Cache-as-ram implementation" + default USE_TIGERLAKE_CAR_NEM_ENHANCED + help + This option allows you to select how cache-as-ram (CAR) is set up. + +config USE_TIGERLAKE_CAR_NEM_ENHANCED + bool "Enhanced Non-evict mode" + select SOC_INTEL_COMMON_BLOCK_CAR + select INTEL_CAR_NEM_ENHANCED + help + A current limitation of NEM (Non-Evict mode) is that code and data + sizes are derived from the requirement to not write out any modified + cache line. With NEM, if there is no physical memory behind the + cached area, the modified data will be lost and NEM results will be + inconsistent. ENHANCED NEM guarantees that modified data is always + kept in cache while clean data is replaced. + +config USE_TIGERLAKE_FSP_CAR + bool "Use FSP CAR" + select FSP_CAR + help + Use FSP APIs to initialize and tear down the Cache-As-Ram. + +endchoice + +config FSP_HEADER_PATH + string "Location of FSP headers" + default "src/vendorcode/intel/fsp/fsp2_0/tigerlake/" + +config FSP_FD_PATH + string + depends on FSP_USE_REPO + default "3rdparty/fsp/TigerLakeFspBinPkg/Fsp.fd" + +endif |