diff options
Diffstat (limited to 'src/soc/intel/sch/raminit.h')
| -rw-r--r-- | src/soc/intel/sch/raminit.h | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/src/soc/intel/sch/raminit.h b/src/soc/intel/sch/raminit.h new file mode 100644 index 0000000000..4a81ec1580 --- /dev/null +++ b/src/soc/intel/sch/raminit.h @@ -0,0 +1,178 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009-2010 iWave Systems + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef RAMINIT_H +#define RAMINIT_H + +/** + * Bit Equates + **/ +#define BIT(x) (1<<x) + +#define EBP_TRP_MASK (BIT(1) | BIT(0)) +#define TRP_LOW 3h +#define TRP_HIGH 5h +#define EBP_TRP_OFFSET 0 /* Start of TRP field in EBP*/ +#define EBP_TRCD_MASK (BIT(3) | BIT(2)) +#define TRCD_LOW 3h +#define TRCD_HIGH 5h +#define EBP_TRCD_OFFSET 2 /* Start of TRCD field in EBP*/ +#define EBP_TCL_MASK (BIT(5) | BIT(4)) +#define TCL_LOW 3 /* Minimum supported CL*/ +#define TCL_HIGH 5 /* Maximum supported CL*/ +#define EBP_TCL_OFFSET 4 /* EBP bit( )for CL mask*/ +#define EBP_DDR2_CL_5_0 BIT(5) /* CL 5.0 = 10b*/ +#define EBP_DDR2_CL_4_0 BIT(4) /* CL 4.0 = 01b*/ +#define EBP_DDR2_CL_3_0 00h /* CL 3.0 = 00b*/ +#define EBP_FREQ_MASK (BIT(10)| BIT(9)) +#define EBP_FREQ_OFFSET 9 /* EBP bit( )for frequency mask*/ +#define EBP_FREQ_400 0 /* 400MHz EBP[10:9] = 00b*/ +#define EBP_FREQ_533 BIT(9) /* 533MHz EBP[10:9] = 01b*/ +#define EBP_REFRESH_MASK (BIT(12)| BIT(11)) +#define EBP_REFRESH_OFFSET 11 /* Bit offset of refresh field*/ +#define EBP_REF_DIS 00h /* Mask for refresh disabled*/ +#define EBP_REF_128CLK BIT(11) /* Mask for 128 clks referesh rate*/ +#define EBP_REF_3_9 BIT(12) /* Mask for 3.9us refresh rate*/ +#define EBP_REF_7_8 (BIT(12)| BIT(11))/* Mask for 7.8us refresh rate*/ +#define EBP_WIDTH_MASK BIT(15) +#define EBP_WIDTH_OFFSET 15 /* Bit offset of EBP width field*/ +#define EBP_SOCKET_X16 BIT(15) /* Bit mask of x8/x16 bit*/ +#define EBP_DENSITY_MASK (BIT(17)| BIT(16)) +#define EBP_DENSITY_OFFSET 16 +#define EBP_DENSITY_512 BIT(16) /* 512Mbit density*/ +#define EBP_DENSITY_1024 BIT(17) /* 1024Mbit density*/ +#define EBP_DENSITY_2048 (BIT(17)| BIT(16))/* 2048Mbit density*/ +#define EBP_RANKS_MASK BIT(18) +#define EBP_RANKS_OFFSET 18 +#define EBP_RANKS BIT(18) /* Bit offset of # of ranks bit*/ +#define EBP_PACKAGE_TYPE BIT(19) /* Package type (stacked or not)*/ +#define EBP_2X_MASK BIT(20) +#define EBP_2X_OFFSET 20 /* Bit offset of ebp 2x refresh field*/ +#define EBP_2X_AUTO_REFRESH BIT(20) /* Bit mask of 2x refresh field*/ +#define EBP_DRAM_PARM_MASK BIT(21) +#define EBP_DRAM_PARM_OFFSET 21 +#define EBP_DRAM_PARM_SPD 0 /* Use SPD to get DRAM parameters*/ +#define EBP_DRAM_PARM_CMC BIT(21) /* DRAM parameters in CMC binary*/ +#define EBP_BOOT_PATH BIT(31) + + + + +#define HB_REG_MCR 0xD0 /* Message Control Register */ +#define HB_REG_MCR_OP_OFFSET 24 /* Offset of the opcode field in MCR */ +#define HB_REG_MCR_PORT_OFFSET 16 /* Offset of the port field in MCR */ +#define HB_REG_MCR_REG_OFFSET 8 /* Offset of the register field in MCR */ +#define HB_REG_MDR 0xD4 /* Message Data Register */ + +/* SCH Message OpCodes and Attributes*/ +#define SCH_OPCODE_WAKEFULLON 0x2 /* SCH message bus "Wake Full On" opcode*/ +#define SCH_OPCODE_DRAMINIT 0xA0 /* SCH message bus "DRAM Init" opcode */ +#define SCH_DRAMINIT_CMD_MRS 0x4000 /* MRS command */ +#define SCH_DRAMINIT_CMD_EMRS1 0x8 /* EMRS 1 command */ +#define SCH_DRAMINIT_CMD_EMRS2 0x10 /* EMRS 2 command */ +#define SCH_DRAMINIT_CMD_EMRS3 0x18 /* EMRS 3 command */ +#define SCH_DRAMINIT_CMD_CBR 0x1 /* CBR command */ +#define SCH_DRAMINIT_CMD_AREF 0x10001 /* Refresh command, MA10=0->All */ +#define SCH_DRAMINIT_CMD_PALL 0x10002 /* Precharge command, MA10=1->All */ +#define SCH_DRAMINIT_CMD_BACT 0x3 /* Bank activate command */ +#define SCH_DRAMINIT_CMD_NOP 0x7 /* NOP command */ +#define SCH_DRAMINIT_RANK_OFFSET 21 /* Offset of the rank selection bit */ +#define SCH_DRAMINIT_RANK_MASK BIT(21) +#define SCH_DRAMINIT_ADDR_OFFSET 6 /* Offset of the address field in MDR */ +#define SCH_DRAMINIT_INTLV BIT(3) /* Interleave burst type */ +#define SCH_DRAMINIT_BL4 2 /* Burst Length = 4 */ +#define SCH_DRAMINIT_CL_OFFSET 4 /* CAS Latency bit offset */ +#define SCH_DRAMINIT_OCD_DEFAULT 0xE000 /* OCD Default command */ +#define SCH_DRAMINIT_DQS_DIS BIT(16) /* DQS Disable command */ +#define SCH_OPCODE_READ 0xD0 /* SCH message bus "read" opcode */ +#define SCH_OPCODE_WRITE 0xE0 /* SCH message bus "write" opcode */ + +/* SCH Message Ports and Registers*/ + +#define SCH_MSG_DUNIT_PORT 0x1 /* DRAM unit port */ +#define SCH_MSG_DUNIT_REG_DRP 0x0 /* DRAM Rank Population and Interface */ +#define DRP_FIELDS 0xFF /* Pertinent fields in DRP */ +#define DRP_RANK0_OFFSET 3 /* Rank 0 enable offset */ +#define DRP_RANK1_OFFSET 7 /* Rank 1 enable offset */ +#define DRP_DENSITY0_OFFSET 1 /* Density offset - Rank 0 */ +#define DRP_DENSITY1_OFFSET 5 /* Density offset - Rank 1 */ +#define DRP_WIDTH0_OFFSET 0 /* Width offset - Rank 0 */ +#define DRP_WIDTH1_OFFSET 4 /* Width offset - Rank 1 */ +#define DRP_CKE_DIS (BIT(14)| BIT(13)) /* CKE disable bits for both ranks */ +#define DRP_CKE_DIS0 BIT(13) /* CKE disable bit - Rank 0 */ +#define DRP_CKE_DIS1 BIT(14) /* CKE disable bit - Rank 1 */ +#define DRP_SCK_DIS (BIT(11)| BIT(10)) /* SCK/SCKB disable bits */ +#define DRP_SCK_DIS1 BIT(11) /* SCK[1]/SCKB[1] disable */ +#define DRP_SCK_DIS0 BIT(10) /* SCK[0]/SCKB[0] disable */ +#define SCH_MSG_DUNIT_REG_DTR 0x01 /* DRAM Timing Register */ +#define DTR_FIELDS 0x3F /* Pertinent fields in DTR */ +#define DTR_TCL_OFFSET 4 /* CAS latency offset */ +#define DTR_TRCD_OFFSET 2 /* RAS CAS Delay Offset */ +#define DTR_TRP_OFFSET 0 /* RAS Precharge Delay Offset */ +#define SCH_MSG_DUNIT_REG_DCO 0x2 /* DRAM Control Register */ +#define DCO_FIELDS 0xF /* Pertinent fields in DCO */ +#define DCO_REFRESH_OFFSET 2 /* Refresh Rate Field Offset */ +#define DCO_FREQ_OFFSET 0 /* DRAM Frequency Field Offset */ +#define DCO_IC BIT(7) /* Initialization complete bit */ +#define SCH_MSG_PUNIT_PORT 04h /* Punit Port */ +#define SCH_MSG_PUNIT_REG_PCR 71h /* Punit Control Register */ +#define SCH_MSG_TEST_PORT 05h /* Test port */ +#define SCH_MSG_TEST_REG_MSR 03h /* Mode and Status Register */ + + +/* Jedec initialization mapping into the MDR address field for DRAM init messages*/ + + +#define SCH_JEDEC_DLLRESET BIT(8) /* DLL Reset bit( ) */ +#define SCH_JEDEC_INTLV BIT(3) /* Interleave/NOT(Sequential) bit( ) */ +#define SCH_JEDEC_CL_OFFSET 4 /* Offset of the CAS latency field */ +#define SCH_JEDEC_OCD_DEFAULT (BIT(7)| BIT(8)| BIT(9)) /* OCD default value */ +#define SCH_JEDEC_DQS_DIS BIT(10) /* DQS disable bit */ +#define SCH_JEDEC_BL4 BIT(1) /* Burst length 4 value */ +/*static values used during JEDEC iniatialization. These values are not +dependent on memory or chipset configuration.*/ +#define JEDEC_STATIC_PARAM ((SCH_JEDEC_INTLV << SCH_DRAMINIT_ADDR_OFFSET) + (SCH_JEDEC_BL4 << SCH_DRAMINIT_ADDR_OFFSET)) + +#define DIMM_SOCKETS 2 + +#define DIMM_SPD_BASE 0x50 +#define DIMM_TCO_BASE 0x30 + +/* Burst length is always 8 */ +#define BURSTLENGTH 8 +#define RAM_PARAM_SOURCE_SOFTSTRAP 1 +#define RAM_PARAM_SOURCE_SPD 0 +struct sys_info { + + u16 memory_frequency; /* 400 or 533*/ + u16 fsb_frequency; /* 400 or 533*/ + + u8 trp; /*3,4,5 DRAM clocks */ + u8 trcd; /*3,4,5 DRAM clocks */ + u8 cl; /*CAS Latency 3,4,5*/ + + u8 refresh; /*Refresh rate disabled,128 DRAM clocks,3.9us,7.8us */ + + u8 data_width; /*x8/x16 data width */ + u8 device_density; /*SDRAM Device Density 512/1024/2048Mbit */ + u8 ranks; /*Single/Double */ + u8 ram_param_source; /*DRAM Parameter Source SPD/SoftStraps(R) Block (down memory) */ + u8 boot_path; + +} __attribute__ ((packed)); + +void sdram_initialize(int boot_mode); + +#endif /* RAMINIT_H */ |