1 files changed, 200 insertions, 0 deletions
diff --git a/src/soc/intel/pantherlake/pmc.c b/src/soc/intel/pantherlake/pmc.c
new file mode 100644
index 0000000000..91aeecd22b
--- /dev/null
+++ b/src/soc/intel/pantherlake/pmc.c
@@ -0,0 +1,200 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <acpi/acpigen.h>
+#include <bootstate.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/mmio.h>
+#include <drivers/intel/pmc_mux/chip.h>
+#include <intelblocks/acpi.h>
+#include <intelblocks/pmc.h>
+#include <intelblocks/pmc_ipc.h>
+#include <intelblocks/pmclib.h>
+#include <intelblocks/rtc.h>
+#include <soc/cpu.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/soc_chip.h>
+#include <stdint.h>
+
+#define PMC_HID		"INTC1026"
+
+static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable)
+{
+	uint32_t reg;
+	uint8_t *pmcbase = pmc_mmio_regs();
+	if (pmcbase == NULL) {
+		printk(BIOS_ERR, "PMC MMIO regs could not be retrieved.\n");
+		return;
+	}
+
+	printk(BIOS_DEBUG, "%sabling Deep S%c\n",
+		enable ? "En" : "Dis", sx + '0');
+	reg = read32(pmcbase + offset);
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	write32(pmcbase + offset, reg);
+}
+
+static void config_deep_s5(int on_ac, int on_dc)
+{
+	/* Treat S4 the same as S5. */
+	config_deep_sX(S4_PWRGATE_POL, S4AC_GATE_SUS, 4, on_ac);
+	config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS, 4, on_dc);
+	config_deep_sX(S5_PWRGATE_POL, S5AC_GATE_SUS, 5, on_ac);
+	config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS, 5, on_dc);
+}
+
+static void config_deep_s3(int on_ac, int on_dc)
+{
+	config_deep_sX(S3_PWRGATE_POL, S3AC_GATE_SUS, 3, on_ac);
+	config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS, 3, on_dc);
+}
+
+static void config_deep_sx(uint32_t deepsx_config)
+{
+	uint32_t reg;
+	uint8_t *pmcbase = pmc_mmio_regs();
+
+	reg = read32(pmcbase + DSX_CFG);
+	reg &= ~DSX_CFG_MASK;
+	reg |= deepsx_config;
+	write32(pmcbase + DSX_CFG, reg);
+}
+
+static void soc_pmc_enable(struct device *dev)
+{
+	const config_t *config = config_of_soc();
+
+	rtc_init();
+
+	pmc_set_power_failure_state(true);
+	pmc_gpe_init();
+
+	config_deep_s3(config->deep_s3_enable_ac, config->deep_s3_enable_dc);
+	config_deep_s5(config->deep_s5_enable_ac, config->deep_s5_enable_dc);
+	config_deep_sx(config->deep_sx_config);
+}
+
+static void soc_pmc_read_resources(struct device *dev)
+{
+	struct resource *res;
+
+	/* Add the fixed MMIO resource */
+	mmio_range(dev, PWRMBASE, PCH_PWRM_BASE_ADDRESS, PCH_PWRM_BASE_SIZE);
+
+	/* Add the fixed I/O resource */
+	res = new_resource(dev, 1);
+	res->base = (resource_t)ACPI_BASE_ADDRESS;
+	res->size = (resource_t)ACPI_BASE_SIZE;
+	res->limit = res->base + res->size - 1;
+	res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+}
+
+static void soc_pmc_fill_ssdt(const struct device *dev)
+{
+	const char *scope = acpi_device_scope(dev);
+	const char *name = acpi_device_name(dev);
+	if (!scope || !name)
+		return;
+
+	acpigen_write_scope(scope);
+	acpigen_write_device(name);
+
+	acpigen_write_name_string("_HID", PMC_HID);
+	acpigen_write_name_string("_DDN", "Intel(R) Panther Lake IPC Controller");
+	/* Hide the device so that Windows does not complain on missing driver */
+	acpigen_write_STA(ACPI_STATUS_DEVICE_HIDDEN_ON);
+
+	/*
+	 * Part of the PCH's reserved 32 MB MMIO range (0xFC800000 - 0xFE7FFFFF).
+	 * The PMC gets 0xFE000000 - 0xFE00FFFF.
+	 */
+	acpigen_write_name("_CRS");
+	acpigen_write_resourcetemplate_header();
+	acpigen_write_mem32fixed(1, PCH_PWRM_BASE_ADDRESS, PCH_PWRM_BASE_SIZE);
+	acpigen_write_resourcetemplate_footer();
+
+	/* Define IPC Write Method */
+	if (CONFIG(PMC_IPC_ACPI_INTERFACE))
+		pmc_ipc_acpi_fill_ssdt();
+
+	acpigen_pop_len(); /* PMC Device */
+	acpigen_pop_len(); /* Scope */
+
+	if (CONFIG(SOC_INTEL_COMMON_BLOCK_ACPI_PEP)) {
+		const struct soc_pmc_lpm ptl_pmc_lpm = {
+			.num_substates = 8,
+			.num_req_regs = 6,
+			.lpm_ipc_offset = 0x1000,
+			.req_reg_stride = 0x30,
+			.lpm_enable_mask = get_supported_lpm_mask(),
+		};
+
+		generate_acpi_power_engine_with_lpm(&ptl_pmc_lpm);
+	}
+
+	printk(BIOS_INFO, "%s: %s at %s\n", acpi_device_path(dev), dev->chip_ops->name,
+	       dev_path(dev));
+}
+
+static void soc_pmc_init(struct device *dev)
+{
+	/*
+	 * pmc_set_acpi_mode() should be delayed until BS_DEV_INIT in order
+	 * to ensure the ordering does not break the assumptions that other
+	 * drivers make about ACPI mode (e.g. Chrome EC). Since it disables
+	 * ACPI mode, other drivers may take different actions based on this
+	 * (e.g. Chrome EC will flush any pending hostevent bits). Because
+	 * PTL has its PMC device available for device_operations, it can be
+	 * done from the "ops->init" callback.
+	 */
+	pmc_set_acpi_mode();
+
+	/*
+	 * Disable ACPI PM timer based on Kconfig
+	 *
+	 * Disabling ACPI PM timer is necessary for XTAL OSC shutdown.
+	 * Disabling ACPI PM timer also switches off TCO
+	 */
+	if (!CONFIG(USE_PM_ACPI_TIMER))
+		setbits8(pmc_mmio_regs() + PCH_PWRM_ACPI_TMR_CTL, ACPI_TIM_DIS);
+}
+
+static void pm1_enable_pwrbtn_smi(void *unused)
+{
+	/* Enable power button SMI after BS_DEV_INIT_CHIPS (FSP-S) is done. */
+	pmc_update_pm1_enable(PWRBTN_EN);
+}
+
+BOOT_STATE_INIT_ENTRY(BS_DEV_INIT_CHIPS, BS_ON_EXIT, pm1_enable_pwrbtn_smi, NULL);
+
+/*
+ * `pmc_final` function is native implementation of equivalent events performed by
+ * each FSP NotifyPhase() API invocations.
+ *
+ *
+ * Clear PMCON status bits (Global Reset/Power Failure/Host Reset Status bits)
+ *
+ * Perform the PMCON status bit clear operation from `.final`
+ * to cover any such chances where later boot stage requested a global
+ * reset and PMCON status bit remains set.
+ */
+static void pmc_final(struct device *dev)
+{
+	pmc_clear_pmcon_sts();
+}
+
+struct device_operations pmc_ops = {
+	.read_resources	  = soc_pmc_read_resources,
+	.set_resources	  = noop_set_resources,
+	.init		  = soc_pmc_init,
+	.enable		  = soc_pmc_enable,
+#if CONFIG(HAVE_ACPI_TABLES)
+	.acpi_fill_ssdt	  = soc_pmc_fill_ssdt,
+#endif
+	.scan_bus	  = scan_static_bus,
+	.final		  = pmc_final,
+};