diff options
Diffstat (limited to 'src/soc/intel/jasperlake/chip.h')
| -rw-r--r-- | src/soc/intel/jasperlake/chip.h | 299 |
1 files changed, 299 insertions, 0 deletions
diff --git a/src/soc/intel/jasperlake/chip.h b/src/soc/intel/jasperlake/chip.h new file mode 100644 index 0000000000..f82f13d45b --- /dev/null +++ b/src/soc/intel/jasperlake/chip.h @@ -0,0 +1,299 @@ +/* + * This file is part of the coreboot project. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _SOC_CHIP_H_ +#define _SOC_CHIP_H_ + +#include <drivers/i2c/designware/dw_i2c.h> +#include <intelblocks/cfg.h> +#include <intelblocks/gpio.h> +#include <intelblocks/gspi.h> +#include <soc/gpe.h> +#include <soc/gpio.h> +#include <soc/gpio_defs.h> +#include <soc/pch.h> +#include <soc/pci_devs.h> +#include <soc/pmc.h> +#include <soc/serialio.h> +#include <soc/usb.h> +#include <stdint.h> + +#define MAX_HD_AUDIO_DMIC_LINKS 2 +#define MAX_HD_AUDIO_SNDW_LINKS 4 +#define MAX_HD_AUDIO_SSP_LINKS 6 + +struct soc_intel_tigerlake_config { + + /* Common struct containing soc config data required by common code */ + struct soc_intel_common_config common_soc_config; + + /* Gpio group routed to each dword of the GPE0 block. Values are + * of the form PMC_GPP_[A:U] or GPD. */ + uint8_t pmc_gpe0_dw0; /* GPE0_31_0 STS/EN */ + uint8_t pmc_gpe0_dw1; /* GPE0_63_32 STS/EN */ + uint8_t pmc_gpe0_dw2; /* GPE0_95_64 STS/EN */ + + /* Generic IO decode ranges */ + uint32_t gen1_dec; + uint32_t gen2_dec; + uint32_t gen3_dec; + uint32_t gen4_dec; + + /* Enable S0iX support */ + int s0ix_enable; + /* Enable DPTF support */ + int dptf_enable; + + /* Deep SX enable for both AC and DC */ + int deep_s3_enable_ac; + int deep_s3_enable_dc; + int deep_s5_enable_ac; + int deep_s5_enable_dc; + + /* Deep Sx Configuration + * DSX_EN_WAKE_PIN - Enable WAKE# pin + * DSX_EN_LAN_WAKE_PIN - Enable LAN_WAKE# pin + * DSX_DIS_AC_PRESENT_PD - Disable pull-down on AC_PRESENT pin */ + uint32_t deep_sx_config; + + /* TCC activation offset */ + uint32_t tcc_offset; + + /* System Agent dynamic frequency support. Only effects ULX/ULT CPUs. + * When enabled memory will be training at two different frequencies. + * 0:Disabled, 1:FixedPoint0, 2:FixedPoint1, 3:FixedPoint2, + * 4:FixedPoint3, 5:Enabled */ + enum { + SaGv_Disabled, + SaGv_FixedPoint0, + SaGv_FixedPoint1, + SaGv_FixedPoint2, + SaGv_FixedPoint3, + SaGv_Enabled, + } SaGv; + + /* Rank Margin Tool. 1:Enable, 0:Disable */ + uint8_t RMT; + + /* USB related */ + struct usb2_port_config usb2_ports[16]; + struct usb3_port_config usb3_ports[10]; + /* Wake Enable Bitmap for USB2 ports */ + uint16_t usb2_wake_enable_bitmap; + /* Wake Enable Bitmap for USB3 ports */ + uint16_t usb3_wake_enable_bitmap; + + /* SATA related */ + uint8_t SataEnable; + uint8_t SataMode; + uint8_t SataSalpSupport; + uint8_t SataPortsEnable[8]; + uint8_t SataPortsDevSlp[8]; + + /* Audio related */ + uint8_t PchHdaDspEnable; + uint8_t PchHdaAudioLinkHdaEnable; + uint8_t PchHdaAudioLinkDmicEnable[MAX_HD_AUDIO_DMIC_LINKS]; + uint8_t PchHdaAudioLinkSspEnable[MAX_HD_AUDIO_SSP_LINKS]; + uint8_t PchHdaAudioLinkSndwEnable[MAX_HD_AUDIO_SNDW_LINKS]; + uint8_t PchHdaIDispLinkTmode; + uint8_t PchHdaIDispLinkFrequency; + uint8_t PchHdaIDispCodecDisconnect; + + /* PCIe Root Ports */ + uint8_t PcieRpEnable[CONFIG_MAX_ROOT_PORTS]; + /* PCIe output clocks type to PCIe devices. + * 0-23: PCH rootport, 0x70: LAN, 0x80: unspecified but in use, + * 0xFF: not used */ + uint8_t PcieClkSrcUsage[CONFIG_MAX_PCIE_CLOCKS]; + /* PCIe ClkReq-to-ClkSrc mapping, number of clkreq signal assigned to + * clksrc. */ + uint8_t PcieClkSrcClkReq[CONFIG_MAX_PCIE_CLOCKS]; + + /* PCIe RP L1 substate */ + enum L1_substates_control { + L1_SS_FSP_DEFAULT, + L1_SS_DISABLED, + L1_SS_L1_1, + L1_SS_L1_2, + } PcieRpL1Substates[CONFIG_MAX_ROOT_PORTS]; + + /* SMBus */ + uint8_t SmbusEnable; + + /* eMMC and SD */ + uint8_t ScsEmmcHs400Enabled; + + /* Enable if SD Card Power Enable Signal is Active High */ + uint8_t SdCardPowerEnableActiveHigh; + + /* Integrated Sensor */ + uint8_t PchIshEnable; + + /* Heci related */ + uint8_t Heci3Enabled; + + /* Gfx related */ + uint8_t IgdDvmt50PreAlloc; + uint8_t InternalGfx; + uint8_t SkipExtGfxScan; + + uint32_t GraphicsConfigPtr; + uint8_t Device4Enable; + + /* HeciEnabled decides the state of Heci1 at end of boot + * Setting to 0 (default) disables Heci1 and hides the device from OS */ + uint8_t HeciEnabled; + /* PL2 Override value in Watts */ + uint32_t tdp_pl2_override; + /* Intel Speed Shift Technology */ + uint8_t speed_shift_enable; + + /* Enable/Disable EIST. 1b:Enabled, 0b:Disabled */ + uint8_t eist_enable; + + /* Enable C6 DRAM */ + uint8_t enable_c6dram; + /* + * PRMRR size setting with below options + * Disable: 0x0 + * 32MB: 0x2000000 + * 64MB: 0x4000000 + * 128 MB: 0x8000000 + * 256 MB: 0x10000000 + * 512 MB: 0x20000000 + */ + uint32_t PrmrrSize; + uint8_t PmTimerDisabled; + /* + * SerialIO device mode selection: + * PchSerialIoDisabled, + * PchSerialIoPci, + * PchSerialIoHidden, + * PchSerialIoLegacyUart, + * PchSerialIoSkipInit + */ + uint8_t SerialIoI2cMode[CONFIG_SOC_INTEL_I2C_DEV_MAX]; + uint8_t SerialIoGSpiMode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; + uint8_t SerialIoUartMode[CONFIG_SOC_INTEL_UART_DEV_MAX]; + /* + * GSPIn Default Chip Select Mode: + * 0:Hardware Mode, + * 1:Software Mode + */ + uint8_t SerialIoGSpiCsMode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; + /* + * GSPIn Default Chip Select State: + * 0: Low, + * 1: High + */ + uint8_t SerialIoGSpiCsState[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; + + /* + * TraceHubMode config + * 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode + */ + uint8_t TraceHubMode; + + /* Debug interface selection */ + enum { + DEBUG_INTERFACE_RAM = (1 << 0), + DEBUG_INTERFACE_UART = (1 << 1), + DEBUG_INTERFACE_USB3 = (1 << 3), + DEBUG_INTERFACE_SERIAL_IO = (1 << 4), + DEBUG_INTERFACE_TRACEHUB = (1 << 5), + } debug_interface_flag; + + /* GPIO SD card detect pin */ + unsigned int sdcard_cd_gpio; + + /* Enable Pch iSCLK */ + uint8_t pch_isclk; + + /* CNVi BT Audio Offload: Enable/Disable BT Audio Offload. */ + enum { + FORCE_DISABLE, + FORCE_ENABLE, + } CnviBtAudioOffload; + + /* Tcss */ + uint8_t TcssXhciEn; + uint8_t TcssXdciEn; + + /* + * Override GPIO PM configuration: + * 0: Use FSP default GPIO PM program, + * 1: coreboot to override GPIO PM program + */ + uint8_t gpio_override_pm; + + /* + * GPIO PM configuration: 0 to disable, 1 to enable power gating + * Bit 6-7: Reserved + * Bit 5: MISCCFG_GPSIDEDPCGEN + * Bit 4: MISCCFG_GPRCOMPCDLCGEN + * Bit 3: MISCCFG_GPRTCDLCGEN + * Bit 2: MISCCFG_GSXLCGEN + * Bit 1: MISCCFG_GPDPCGEN + * Bit 0: MISCCFG_GPDLCGEN + */ + uint8_t gpio_pm[TOTAL_GPIO_COMM]; + + /* DP config */ + /* + * Port config + * 0:Disabled, 1:eDP, 2:MIPI DSI + */ + uint8_t DdiPortAConfig; + uint8_t DdiPortBConfig; + + /* Enable(1)/Disable(0) HPD */ + uint8_t DdiPortAHpd; + uint8_t DdiPortBHpd; + uint8_t DdiPortCHpd; + uint8_t DdiPort1Hpd; + uint8_t DdiPort2Hpd; + uint8_t DdiPort3Hpd; + uint8_t DdiPort4Hpd; + + /* Enable(1)/Disable(0) DDC */ + uint8_t DdiPortADdc; + uint8_t DdiPortBDdc; + uint8_t DdiPortCDdc; + uint8_t DdiPort1Ddc; + uint8_t DdiPort2Ddc; + uint8_t DdiPort3Ddc; + uint8_t DdiPort4Ddc; + + /* Hybrid storage mode enable (1) / disable (0) + * This mode makes FSP detect Optane and NVME and set PCIe lane mode + * accordingly */ + uint8_t HybridStorageMode; + + /* + * Override CPU flex ratio value: + * CPU ratio value controls the maximum processor non-turbo ratio. + * Valid Range 0 to 63. + * In general descriptor provides option to set default cpu flex ratio. + * Default cpu flex ratio 0 ensures booting with non-turbo max frequency. + * That's the reason FSP skips cpu_ratio override if cpu_ratio is 0. + * Only override CPU flex ratio to not boot with non-turbo max. + */ + uint8_t cpu_ratio_override; + +}; + +typedef struct soc_intel_tigerlake_config config_t; + +#endif |