diff options
Diffstat (limited to 'src/soc/intel/icelake/espi.c')
| -rw-r--r-- | src/soc/intel/icelake/espi.c | 254 |
1 files changed, 254 insertions, 0 deletions
diff --git a/src/soc/intel/icelake/espi.c b/src/soc/intel/icelake/espi.c new file mode 100644 index 0000000000..9ca0c7c295 --- /dev/null +++ b/src/soc/intel/icelake/espi.c @@ -0,0 +1,254 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <device/pci.h> +#include <pc80/isa-dma.h> +#include <pc80/i8259.h> +#include <arch/io.h> +#include <device/pci_ops.h> +#include <arch/ioapic.h> +#include <intelblocks/itss.h> +#include <intelblocks/lpc_lib.h> +#include <intelblocks/pcr.h> +#include <reg_script.h> +#include <soc/espi.h> +#include <soc/iomap.h> +#include <soc/irq.h> +#include <soc/pci_devs.h> +#include <soc/pcr_ids.h> + +#include "chip.h" + +/* +* As per the BWG, Chapter 5.9.1. "PCH BIOS component will reserve +* certain memory range as reserved range for BIOS usage. +* For this SOC, the range will be from 0FC800000h till FE7FFFFFh" +*/ +static const struct lpc_mmio_range icl_lpc_fixed_mmio_ranges[] = { + { PCH_PRESERVED_BASE_ADDRESS, PCH_PRESERVED_BASE_SIZE }, + { 0, 0 } +}; + +const struct lpc_mmio_range *soc_get_fixed_mmio_ranges() +{ + return icl_lpc_fixed_mmio_ranges; +} + +void soc_get_gen_io_dec_range(const struct device *dev, uint32_t *gen_io_dec) +{ + const config_t *config = dev->chip_info; + + gen_io_dec[0] = config->gen1_dec; + gen_io_dec[1] = config->gen2_dec; + gen_io_dec[2] = config->gen3_dec; + gen_io_dec[3] = config->gen4_dec; +} + +void soc_setup_dmi_pcr_io_dec(uint32_t *gen_io_dec) +{ + /* Mirror these same settings in DMI PCR */ + pcr_write32(PID_DMI, PCR_DMI_LPCLGIR1, gen_io_dec[0]); + pcr_write32(PID_DMI, PCR_DMI_LPCLGIR2, gen_io_dec[1]); + pcr_write32(PID_DMI, PCR_DMI_LPCLGIR3, gen_io_dec[2]); + pcr_write32(PID_DMI, PCR_DMI_LPCLGIR4, gen_io_dec[3]); +} + +uint8_t get_pch_series(void) +{ + uint16_t lpc_did_hi_byte; + + /* + * Fetch upper 8 bits on ESPI device ID to determine PCH type + * Adding 1 to the offset to fetch upper 8 bits + */ + lpc_did_hi_byte = pci_read_config8(PCH_DEV_ESPI, PCI_DEVICE_ID + 1); + + if (lpc_did_hi_byte == 0x9D) + return PCH_LP; + else if (lpc_did_hi_byte == 0xA3) + return PCH_H; + else + return PCH_UNKNOWN_SERIES; +} + +#if ENV_RAMSTAGE +static void soc_mirror_dmi_pcr_io_dec(void) +{ + struct device *dev = pcidev_on_root(PCH_DEV_SLOT_ESPI, 0); + uint32_t io_dec_arr[] = { + pci_read_config32(dev, ESPI_GEN1_DEC), + pci_read_config32(dev, ESPI_GEN2_DEC), + pci_read_config32(dev, ESPI_GEN3_DEC), + pci_read_config32(dev, ESPI_GEN4_DEC), + }; + /* Mirror these same settings in DMI PCR */ + soc_setup_dmi_pcr_io_dec(&io_dec_arr[0]); +} + +static void pch_enable_ioapic(const struct device *dev) +{ + u32 reg32; + /* PCH-LP has 120 redirection entries */ + const int redir_entries = 120; + + set_ioapic_id((void *)IO_APIC_ADDR, 0x02); + + /* affirm full set of redirection table entries ("write once") */ + reg32 = io_apic_read((void *)IO_APIC_ADDR, 0x01); + + reg32 &= ~0x00ff0000; + reg32 |= (redir_entries - 1) << 16; + + io_apic_write((void *)IO_APIC_ADDR, 0x01, reg32); + + /* + * Select Boot Configuration register (0x03) and + * use Processor System Bus (0x01) to deliver interrupts. + */ + io_apic_write((void *)IO_APIC_ADDR, 0x03, 0x01); +} +/* + * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control + * 0x00 - 0000 = Reserved + * 0x01 - 0001 = Reserved + * 0x02 - 0010 = Reserved + * 0x03 - 0011 = IRQ3 + * 0x04 - 0100 = IRQ4 + * 0x05 - 0101 = IRQ5 + * 0x06 - 0110 = IRQ6 + * 0x07 - 0111 = IRQ7 + * 0x08 - 1000 = Reserved + * 0x09 - 1001 = IRQ9 + * 0x0A - 1010 = IRQ10 + * 0x0B - 1011 = IRQ11 + * 0x0C - 1100 = IRQ12 + * 0x0D - 1101 = Reserved + * 0x0E - 1110 = IRQ14 + * 0x0F - 1111 = IRQ15 + * PIRQ[n]_ROUT[7] - PIRQ Routing Control + * 0x80 - The PIRQ is not routed. + */ + +void soc_pch_pirq_init(const struct device *dev) +{ + struct device *irq_dev; + uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG]; + + pch_interrupt_routing[0] = PCH_IRQ11; + pch_interrupt_routing[1] = PCH_IRQ10; + pch_interrupt_routing[2] = PCH_IRQ11; + pch_interrupt_routing[3] = PCH_IRQ11; + pch_interrupt_routing[4] = PCH_IRQ11; + pch_interrupt_routing[5] = PCH_IRQ11; + pch_interrupt_routing[6] = PCH_IRQ11; + pch_interrupt_routing[7] = PCH_IRQ11; + + itss_irq_init(pch_interrupt_routing); + + for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { + u8 int_pin = 0, int_line = 0; + + if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) + continue; + + int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); + + switch (int_pin) { + case 1: /* INTA# */ + int_line = PCH_IRQ11; + break; + case 2: /* INTB# */ + int_line = PCH_IRQ10; + break; + case 3: /* INTC# */ + int_line = PCH_IRQ11; + break; + case 4: /* INTD# */ + int_line = PCH_IRQ11; + break; + } + + if (!int_line) + continue; + + pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); + } +} + +static void pch_misc_init(void) +{ + uint8_t reg8; + + /* Setup NMI on errors, disable SERR */ + reg8 = (inb(0x61)) & 0xf0; + outb(0x61, (reg8 | (1 << 2))); + + /* Disable NMI sources */ + outb(0x70, (1 << 7)); +}; + +static void clock_gate_8254(const struct device *dev) +{ + const config_t *config = dev->chip_info; + + if (!config->clock_gate_8254) + return; + + itss_clock_gate_8254(); +} + +void lpc_soc_init(struct device *dev) +{ + /* Legacy initialization */ + isa_dma_init(); + pch_misc_init(); + + /* Enable CLKRUN_EN for power gating ESPI */ + lpc_enable_pci_clk_cntl(); + + /* Set ESPI Serial IRQ mode */ + if (CONFIG(SERIRQ_CONTINUOUS_MODE)) + lpc_set_serirq_mode(SERIRQ_CONTINUOUS); + else + lpc_set_serirq_mode(SERIRQ_QUIET); + + /* Interrupt configuration */ + pch_enable_ioapic(dev); + soc_pch_pirq_init(dev); + setup_i8259(); + i8259_configure_irq_trigger(9, 1); + clock_gate_8254(dev); + soc_mirror_dmi_pcr_io_dec(); +} + +/* Fill up ESPI IO resource structure inside SoC directory */ +void pch_lpc_soc_fill_io_resources(struct device *dev) +{ + /* + * PMC pci device gets hidden from PCI bus due to Silicon + * policy hence bind ACPI BASE aka ABASE (offset 0x20) with + * ESPI IO resources to ensure that ABASE falls under PCI reserved + * IO memory range. + * + * Note: Don't add any more resource with same offset 0x20 + * under this device space. + */ + pch_lpc_add_new_resource(dev, PCI_BASE_ADDRESS_4, + ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, IORESOURCE_IO | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED); +} + +#endif |