diff options
Diffstat (limited to 'src/soc/intel/fsp_baytrail/baytrail/iosf.h')
| -rw-r--r-- | src/soc/intel/fsp_baytrail/baytrail/iosf.h | 195 |
1 files changed, 195 insertions, 0 deletions
diff --git a/src/soc/intel/fsp_baytrail/baytrail/iosf.h b/src/soc/intel/fsp_baytrail/baytrail/iosf.h new file mode 100644 index 0000000000..8fd1e24384 --- /dev/null +++ b/src/soc/intel/fsp_baytrail/baytrail/iosf.h @@ -0,0 +1,195 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied wacbmem_entryanty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BAYTRAIL_IOSF_H_ +#define _BAYTRAIL_IOSF_H_ + +#include <stdint.h> +#include <baytrail/pci_devs.h> + +/* + * The Bay Trail SoC has a message network called IOSF Sideband. The access + * routines are through 3 registers in PCI config space of 00:00.0: + * MCR - control register + * MDR - data register + * MCRX - control register extension + * The extension register is only used for addresses that don't fit into the + * 8 bit register address. + */ + +#ifndef PCI_DEV +#define PCI_DEV(SEGBUS, DEV, FN) ( \ + (((SEGBUS) & 0xFFF) << 20) | \ + (((DEV) & 0x1F) << 15) | \ + (((FN) & 0x07) << 12)) +#endif +#define IOSF_PCI_DEV PCI_DEV(0,SOC_DEV,SOC_FUNC) + +#define MCR_REG 0xd0 +#define IOSF_OPCODE(x) ((x) << 24) +#define IOSF_PORT(x) ((0xff & (x)) << 16) +#define IOSF_REG(x) ((0xff & (x)) << 8) +#define IOSF_REG_UPPER(x) (((~0xff) & (x))) +#define IOSF_BYTE_EN_0 0x10 +#define IOSF_BYTE_EN_1 0x20 +#define IOSF_BYTE_EN_2 0x40 +#define IOSF_BYTE_EN_3 0x80 +#define IOSF_BYTE_EN \ + (IOSF_BYTE_EN_0 | IOSF_BYTE_EN_1 | IOSF_BYTE_EN_2 | IOSF_BYTE_EN_3) +#define MDR_REG 0xd4 +#define MCRX_REG 0xd8 + +uint32_t iosf_bunit_read(int reg); +void iosf_bunit_write(int reg, uint32_t val); +uint32_t iosf_dunit_read(int reg); +void iosf_dunit_write(int reg, uint32_t val); +/* Some registers are per channel while the gloals live in dunit 0 */ +uint32_t iosf_dunit_ch0_read(int reg); +uint32_t iosf_dunit_ch1_read(int reg); +uint32_t iosf_punit_read(int reg); +uint32_t iosf_lpss_read(int reg); +void iosf_lpss_write(int reg, uint32_t val); + +/* IOSF ports. */ +#define IOSF_PORT_AUNIT 0x00 /* IO Arbiter unit */ +#define IOSF_PORT_SYSMEMC 0x01 /* System Memory Controller */ +#define IOSF_PORT_BUNIT 0x03 /* System Memroy Arbiter/Bunit */ +#define IOSF_PORT_DUNIT_CH1 0x07 /* DUNIT Channel 1 */ +#define IOSF_PORT_USBPHY 0x43 /* USB PHY */ +#define IOSF_PORT_USHPHY 0x61 /* USB XHCI PHY */ +#define IOSF_PORT_LPSS 0xa0 /* LPSS - Low Power Subsystem */ + +/* Read and write opcodes differ per port. */ +#define IOSF_OP_READ_SYSMEMC 0x10 +#define IOSF_OP_WRITE_SYSMEMC (IOSF_OP_READ_SYSMEMC | 1) +#define IOSF_OP_READ_BUNIT 0x10 +#define IOSF_OP_WRITE_BUNIT (IOSF_OP_READ_BUNIT | 1) +#define IOSF_OP_READ_LPSS 0x06 +#define IOSF_OP_WRITE_LPSS (IOSF_OP_READ_LPSS | 1) + +/* + * BUNIT Registers. + */ + +#define BNOCACHE 0x23 +/* BMBOUND has a 128MiB granularity. Highest address is 0xf8000000. */ +#define BUNIT_BMBOUND 0x25 +/* BMBOUND_HI describes the available ram above 4GiB. It has a + * 256MiB granularity. Physical address bits 35:28 are compared with 31:24 + * bits in the BMBOUND_HI register. Also note that since BMBOUND has 128MiB + * granularity care needs to be taken with the e820 map to account for a hole + * in the ram. */ +#define BUNIT_BMBOUND_HI 0x26 +#define BUNIT_MMCONF_REG 0x27 +/* The SMMRR registers define the SMM region in MiB granularity. */ +#define BUNIT_SMRRL 0x2e +#define BUNIT_SMRRH 0x2f +# define BUNIT_SMRR_ENABLE (1 << 31) + +/* + * DUNIT Registers. + */ + +#define DRP 0x00 +# define DRP_DIMM0_RANK0_EN (0x01 << 0) +# define DRP_DIMM0_RANK1_EN (0x01 << 1) +# define DRP_DIMM1_RANK0_EN (0x01 << 2) +# define DRP_DIMM1_RANK1_EN (0x01 << 3) +# define DRP_RANK_MASK (DRP_DIMM0_RANK0_EN | DRP_DIMM0_RANK1_EN | \ + DRP_DIMM1_RANK0_EN | DRP_DIMM1_RANK1_EN) +#define DTR0 0x01 +# define DTR0_SPEED_MASK 0x03 +# define DTR0_SPEED_800 0x00 +# define DTR0_SPEED_1066 0x01 +# define DTR0_SPEED_1333 0x02 +# define DTR0_SPEED_1600 0x03 + + +/* + * LPSS Registers + */ +#define LPSS_SIO_DMA1_CTL 0x280 +#define LPSS_I2C1_CTL 0x288 +#define LPSS_I2C2_CTL 0x290 +#define LPSS_I2C3_CTL 0x298 +#define LPSS_I2C4_CTL 0x2a0 +#define LPSS_I2C5_CTL 0x2a8 +#define LPSS_I2C6_CTL 0x2b0 +#define LPSS_I2C7_CTL 0x2b8 +#define LPSS_SIO_DMA2_CTL 0x240 +#define LPSS_PWM1_CTL 0x248 +#define LPSS_PWM2_CTL 0x250 +#define LPSS_HSUART1_CTL 0x258 +#define LPSS_HSUART2_CTL 0x260 +#define LPSS_SPI_CTL 0x268 +# define LPSS_CTL_ACPI_INT_EN (1 << 21) +# define LPSS_CTL_PCI_CFG_DIS (1 << 20) +# define LPSS_CTL_SNOOP (1 << 18) +# define LPSS_CTL_NOSNOOP (1 << 19) +# define LPSS_CTL_PM_CAP_PRSNT (1 << 1) + +/* + * SCC Registers + */ +#define SCC_SD_CTL 0x504 +#define SCC_SDIO_CTL 0x508 +#define SCC_MMC_CTL 0x50c +# define SCC_CTL_PCI_CFG_DIS (1 << 0) +# define SCC_CTL_ACPI_INT_EN (1 << 1) + +/* + * CCU Registers + */ + +#define PLT_CLK_CTRL_0 0x3c +#define PLT_CLK_CTRL_1 0x40 +#define PLT_CLK_CTRL_2 0x44 +#define PLT_CLK_CTRL_3 0x48 +#define PLT_CLK_CTRL_4 0x4c +#define PLT_CLK_CTRL_5 0x50 +# define PLT_CLK_CTRL_19P2MHZ_FREQ (0 << 1) +# define PLT_CLK_CTRL_25MHZ_FREQ (1 << 1) +# define PLT_CLK_CTRL_SELECT_FREQ (1 << 0) + +/* + * USBPHY Registers + */ +#define USBPHY_COMPBG 0x7f04 +#define USBPHY_PER_PORT_LANE0 0x4100 +#define USBPHY_PER_PORT_RCOMP_HS_PULLUP0 0x4122 +#define USBPHY_PER_PORT_LANE1 0x4200 +#define USBPHY_PER_PORT_RCOMP_HS_PULLUP1 0x4222 +#define USBPHY_PER_PORT_LANE2 0x4300 +#define USBPHY_PER_PORT_RCOMP_HS_PULLUP2 0x4322 +#define USBPHY_PER_PORT_LANE3 0x4400 +#define USBPHY_PER_PORT_RCOMP_HS_PULLUP3 0x4422 + +/* + * USHPHY Registers + */ +#define USHPHY_CDN_PLL_CONTROL 0x03c0 +#define USHPHY_CDN_VCO_START_CAL_POINT 0x0054 +#define USHPHY_CCDRLF 0x8040 +#define USHPHY_PEAKING_AMP_CONFIG_DIAG 0x80a8 +#define USHPHY_OFFSET_COR_CONFIG_DIAG 0x80b0 +#define USHPHY_VGA_GAIN_CONFIG_DIAG 0x8080 +#define USHPHY_REE_DAC_CONTROL 0x80b8 +#define USHPHY_CDN_U1_POWER_STATE_DEF 0x0000 + +#endif /* _BAYTRAIL_IOSF_H_ */ |