1 files changed, 254 insertions, 0 deletions
diff --git a/src/soc/intel/broadwell/sata.c b/src/soc/intel/broadwell/sata.c
new file mode 100644
index 0000000000..e8d1fbe684
--- /dev/null
+++ b/src/soc/intel/broadwell/sata.c
@@ -0,0 +1,254 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2014 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <delay.h>
+#include <broadwell/iobp.h>
+#include <broadwell/ramstage.h>
+#include <broadwell/rcba.h>
+#include <broadwell/sata.h>
+#include <chip.h>
+
+static inline u32 sir_read(struct device *dev, int idx)
+{
+	pci_write_config32(dev, SATA_SIRI, idx);
+	return pci_read_config32(dev, SATA_SIRD);
+}
+
+static inline void sir_write(struct device *dev, int idx, u32 value)
+{
+	pci_write_config32(dev, SATA_SIRI, idx);
+	pci_write_config32(dev, SATA_SIRD, value);
+}
+
+static void sata_init(struct device *dev)
+{
+	config_t *config = dev->chip_info;
+	u32 reg32, abar;
+	u16 reg16;
+
+	printk(BIOS_DEBUG, "SATA: Initializing controller in AHCI mode.\n");
+
+	/* Enable BARs */
+	pci_write_config16(dev, PCI_COMMAND, 0x0007);
+
+	/* Set Interrupt Line */
+	/* Interrupt Pin is set by D31IP.PIP */
+	pci_write_config8(dev, PCI_INTERRUPT_LINE, 0x0a);
+
+	/* Set timings */
+	pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+			   IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
+			   IDE_PPE0 | IDE_IE0 | IDE_TIME0);
+	pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+			   IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
+
+	/* Sync DMA */
+	pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
+	pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
+
+	/* Set IDE I/O Configuration */
+	reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
+	pci_write_config32(dev, IDE_CONFIG, reg32);
+
+	/* for AHCI, Port Enable is managed in memory mapped space */
+	reg16 = pci_read_config16(dev, 0x92);
+	reg16 &= ~0x3f;
+	reg16 |= 0x8000 | config->sata_port_map;
+	pci_write_config16(dev, 0x92, reg16);
+	udelay(2);
+
+	/* Setup register 98h */
+	reg32 = pci_read_config16(dev, 0x98);
+	reg32 |= 1 << 19;    /* BWG step 6 */
+	reg32 |= 1 << 22;    /* BWG step 5 */
+	reg32 &= ~(0x3f << 7);
+	reg32 |= 0x04 << 7;  /* BWG step 7 */
+	reg32 |= 1 << 20;    /* BWG step 8 */
+	reg32 &= ~(0x03 << 5);
+	reg32 |= 1 << 5;     /* BWG step 9 */
+	reg32 |= 1 << 18;    /* BWG step 10 */
+	reg32 |= 1 << 29;    /* BWG step 11 */
+	reg32 &= ~((1 << 31) | (1 << 30));
+	reg32 |= 1 << 23;
+	reg32 |= 1 << 24; /* Disable listen mode (hotplug) */
+	pci_write_config32(dev, 0x98, reg32);
+
+	/* Setup register 9Ch */
+	reg16 = 0;           /* Disable alternate ID */
+	reg16 = 1 << 5;      /* BWG step 12 */
+	pci_write_config16(dev, 0x9c, reg16);
+
+	/* SATA Initialization register */
+	reg32 = 0x183;
+	reg32 |= (config->sata_port_map ^ 0x3f) << 24;
+	reg32 |= (config->sata_devslp_mux & 1) << 15;
+	pci_write_config32(dev, 0x94, reg32);
+
+	/* Initialize AHCI memory-mapped space */
+	abar = pci_read_config32(dev, PCI_BASE_ADDRESS_5);
+	printk(BIOS_DEBUG, "ABAR: %08X\n", abar);
+
+	/* CAP (HBA Capabilities) : enable power management */
+	reg32 = read32(abar + 0x00);
+	reg32 |= 0x0c006000;  // set PSC+SSC+SALP+SSS
+	reg32 &= ~0x00020060; // clear SXS+EMS+PMS
+	reg32 |= (1 << 18);   // SAM: SATA AHCI MODE ONLY
+	write32(abar + 0x00, reg32);
+
+	/* PI (Ports implemented) */
+	write32(abar + 0x0c, config->sata_port_map);
+	(void) read32(abar + 0x0c); /* Read back 1 */
+	(void) read32(abar + 0x0c); /* Read back 2 */
+
+	/* CAP2 (HBA Capabilities Extended)*/
+	reg32 = read32(abar + 0x24);
+
+	/*
+	 * Static Power Gating for unused ports
+	 */
+	reg32 = RCBA32(0x3a84);
+	/* Port 3 and 2 disabled */
+	if ((config->sata_port_map & ((1 << 3)|(1 << 2))) == 0)
+		reg32 |= (1 << 24) | (1 << 26);
+	/* Port 1 and 0 disabled */
+	if ((config->sata_port_map & ((1 << 1)|(1 << 0))) == 0)
+		reg32 |= (1 << 20) | (1 << 18);
+	RCBA32(0x3a84) = reg32;
+
+	/* Enable DEVSLP */
+	if (config->sata_devslp_disable)
+		reg32 &= ~(1 << 3);
+	else
+		reg32 |= (1 << 5)|(1 << 4)|(1 << 3)|(1 << 2);
+	write32(abar + 0x24, reg32);
+
+	/* Set Gen3 Transmitter settings if needed */
+	if (config->sata_port0_gen3_tx)
+		pch_iobp_update(SATA_IOBP_SP0G3IR, 0,
+				config->sata_port0_gen3_tx);
+
+	if (config->sata_port1_gen3_tx)
+		pch_iobp_update(SATA_IOBP_SP1G3IR, 0,
+				config->sata_port1_gen3_tx);
+
+	/* Set Gen3 DTLE DATA / EDGE registers if needed */
+	if (config->sata_port0_gen3_dtle) {
+		pch_iobp_update(SATA_IOBP_SP0DTLE_DATA,
+				~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT),
+				(config->sata_port0_gen3_dtle & SATA_DTLE_MASK)
+				<< SATA_DTLE_DATA_SHIFT);
+
+		pch_iobp_update(SATA_IOBP_SP0DTLE_EDGE,
+				~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT),
+				(config->sata_port0_gen3_dtle & SATA_DTLE_MASK)
+				<< SATA_DTLE_EDGE_SHIFT);
+	}
+
+	if (config->sata_port1_gen3_dtle) {
+		pch_iobp_update(SATA_IOBP_SP1DTLE_DATA,
+				~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT),
+				(config->sata_port1_gen3_dtle & SATA_DTLE_MASK)
+				<< SATA_DTLE_DATA_SHIFT);
+
+		pch_iobp_update(SATA_IOBP_SP1DTLE_EDGE,
+				~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT),
+				(config->sata_port1_gen3_dtle & SATA_DTLE_MASK)
+				<< SATA_DTLE_EDGE_SHIFT);
+	}
+
+	/*
+	 * Additional Programming Requirements for Power Optimizer
+	 */
+
+	/* Step 1 */
+	sir_write(dev, 0x64, 0x883c9003);
+
+	/* Step 2: SIR 68h[15:0] = 880Ah */
+	reg32 = sir_read(dev, 0x68);
+	reg32 &= 0xffff0000;
+	reg32 |= 0x880a;
+	sir_write(dev, 0x68, reg32);
+
+	/* Step 3: SIR 60h[3] = 1 */
+	reg32 = sir_read(dev, 0x60);
+	reg32 |= (1 << 3);
+	sir_write(dev, 0x60, reg32);
+
+	/* Step 4: SIR 60h[0] = 1 */
+	reg32 = sir_read(dev, 0x60);
+	reg32 |= (1 << 0);
+	sir_write(dev, 0x60, reg32);
+
+	/* Step 5: SIR 60h[1] = 1 */
+	reg32 = sir_read(dev, 0x60);
+	reg32 |= (1 << 1);
+	sir_write(dev, 0x60, reg32);
+
+	/* Clock Gating */
+	sir_write(dev, 0x70, 0x3f00bf1f);
+	sir_write(dev, 0x54, 0xcf000f0f);
+	sir_write(dev, 0x58, 0x00190000);
+
+	reg32 = pci_read_config32(dev, 0x300);
+	reg32 |= (1 << 17) | (1 << 16);
+	reg32 |= (1 << 31) | (1 << 30) | (1 << 29);
+	pci_write_config32(dev, 0x300, reg32);
+}
+
+/*
+ * Set SATA controller mode early so the resource allocator can
+ * properly assign IO/Memory resources for the controller.
+ */
+static void sata_enable(device_t dev)
+{
+	/* Get the chip configuration */
+	config_t *config = dev->chip_info;
+	u16 map = 0x0060;
+
+	map |= (config->sata_port_map ^ 0x3f) << 8;
+
+	pci_write_config16(dev, 0x90, map);
+}
+
+static struct device_operations sata_ops = {
+	.read_resources		= &pci_dev_read_resources,
+	.set_resources		= &pci_dev_set_resources,
+	.enable_resources	= &pci_dev_enable_resources,
+	.init			= &sata_init,
+	.enable			= &sata_enable,
+	.ops_pci		= &broadwell_pci_ops,
+};
+
+static const unsigned short pci_device_ids[] = {
+	0x9c03, 0x9c05, 0x9c07, 0x9c0f,                 /* LynxPoint-LP */
+	0x9c83,	0x9c85, 0x282a, 0x9c87, 0x282a, 0x9c8f, /* WildcatPoint */
+	0
+};
+
+static const struct pci_driver pch_sata __pci_driver = {
+	.ops	 = &sata_ops,
+	.vendor	 = PCI_VENDOR_ID_INTEL,
+	.devices = pci_device_ids,
+};