diff options
Diffstat (limited to 'src/soc/intel/broadwell/pch/lpc.c')
| -rw-r--r-- | src/soc/intel/broadwell/pch/lpc.c | 677 |
1 files changed, 677 insertions, 0 deletions
diff --git a/src/soc/intel/broadwell/pch/lpc.c b/src/soc/intel/broadwell/pch/lpc.c new file mode 100644 index 0000000000..2111913a0e --- /dev/null +++ b/src/soc/intel/broadwell/pch/lpc.c @@ -0,0 +1,677 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <option.h> +#include <pc80/isa-dma.h> +#include <pc80/i8259.h> +#include <device/pci_ops.h> +#include <arch/ioapic.h> +#include <acpi/acpi.h> +#include <acpi/acpi_gnvs.h> +#include <cpu/x86/smm.h> +#include <cbmem.h> +#include <string.h> +#include <soc/gpio.h> +#include <soc/iobp.h> +#include <soc/iomap.h> +#include <soc/lpc.h> +#include <soc/nvs.h> +#include <soc/pch.h> +#include <soc/pci_devs.h> +#include <soc/pm.h> +#include <soc/ramstage.h> +#include <soc/rcba.h> +#include <soc/intel/broadwell/pch/chip.h> +#include <acpi/acpigen.h> +#include <southbridge/intel/common/rtc.h> + +static void pch_enable_ioapic(struct device *dev) +{ + u32 reg32; + + /* Assign unique bus/dev/fn for I/O APIC */ + pci_write_config16(dev, LPC_IBDF, + PCH_IOAPIC_PCI_BUS << 8 | PCH_IOAPIC_PCI_SLOT << 3); + + set_ioapic_id(VIO_APIC_VADDR, 0x02); + + /* affirm full set of redirection table entries ("write once") */ + reg32 = io_apic_read(VIO_APIC_VADDR, 0x01); + + /* PCH-LP has 39 redirection entries */ + reg32 &= ~0x00ff0000; + reg32 |= 0x00270000; + + io_apic_write(VIO_APIC_VADDR, 0x01, reg32); + + /* + * Select Boot Configuration register (0x03) and + * use Processor System Bus (0x01) to deliver interrupts. + */ + io_apic_write(VIO_APIC_VADDR, 0x03, 0x01); +} + +static void enable_hpet(struct device *dev) +{ + size_t i; + + /* Assign unique bus/dev/fn for each HPET */ + for (i = 0; i < 8; ++i) + pci_write_config16(dev, LPC_HnBDF(i), + PCH_HPET_PCI_BUS << 8 | PCH_HPET_PCI_SLOT << 3 | i); +} + +/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control + * 0x00 - 0000 = Reserved + * 0x01 - 0001 = Reserved + * 0x02 - 0010 = Reserved + * 0x03 - 0011 = IRQ3 + * 0x04 - 0100 = IRQ4 + * 0x05 - 0101 = IRQ5 + * 0x06 - 0110 = IRQ6 + * 0x07 - 0111 = IRQ7 + * 0x08 - 1000 = Reserved + * 0x09 - 1001 = IRQ9 + * 0x0A - 1010 = IRQ10 + * 0x0B - 1011 = IRQ11 + * 0x0C - 1100 = IRQ12 + * 0x0D - 1101 = Reserved + * 0x0E - 1110 = IRQ14 + * 0x0F - 1111 = IRQ15 + * PIRQ[n]_ROUT[7] - PIRQ Routing Control + * 0x80 - The PIRQ is not routed. + */ + +static void pch_pirq_init(struct device *dev) +{ + struct device *irq_dev; + + const uint8_t pirq = 0x80; + + pci_write_config8(dev, PIRQA_ROUT, pirq); + pci_write_config8(dev, PIRQB_ROUT, pirq); + pci_write_config8(dev, PIRQC_ROUT, pirq); + pci_write_config8(dev, PIRQD_ROUT, pirq); + + pci_write_config8(dev, PIRQE_ROUT, pirq); + pci_write_config8(dev, PIRQF_ROUT, pirq); + pci_write_config8(dev, PIRQG_ROUT, pirq); + pci_write_config8(dev, PIRQH_ROUT, pirq); + + for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { + u8 int_pin = 0, int_line = 0; + + if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) + continue; + + int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); + + switch (int_pin) { + case 1: /* INTA# */ + case 2: /* INTB# */ + case 3: /* INTC# */ + case 4: /* INTD# */ + int_line = pirq; + break; + } + + if (!int_line) + continue; + + pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); + } +} + +static void pch_power_options(struct device *dev) +{ + u16 reg16; + const char *state; + /* Get the chip configuration */ + const struct soc_intel_broadwell_pch_config *config = config_of(dev); + int pwr_on = CONFIG_MAINBOARD_POWER_FAILURE_STATE; + + /* Which state do we want to goto after g3 (power restored)? + * 0 == S0 Full On + * 1 == S5 Soft Off + * + * If the option is not existent (Laptops), use Kconfig setting. + */ + get_option(&pwr_on, "power_on_after_fail"); + + reg16 = pci_read_config16(dev, GEN_PMCON_3); + reg16 &= 0xfffe; + switch (pwr_on) { + case MAINBOARD_POWER_OFF: + reg16 |= 1; + state = "off"; + break; + case MAINBOARD_POWER_ON: + reg16 &= ~1; + state = "on"; + break; + case MAINBOARD_POWER_KEEP: + reg16 &= ~1; + state = "state keep"; + break; + default: + state = "undefined"; + } + pci_write_config16(dev, GEN_PMCON_3, reg16); + printk(BIOS_INFO, "Set power %s after power failure.\n", state); + + /* GPE setup based on device tree configuration */ + enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2, + config->gpe0_en_3, config->gpe0_en_4); + + /* SMI setup based on device tree configuration */ + enable_alt_smi(config->alt_gp_smi_en); +} + +static void pch_misc_init(struct device *dev) +{ + u8 reg8; + u16 reg16; + u32 reg32; + + reg16 = pci_read_config16(dev, GEN_PMCON_3); + + reg16 &= ~(3 << 4); /* SLP_S4# Assertion Stretch 4s */ + reg16 |= (1 << 3); /* SLP_S4# Assertion Stretch Enable */ + + reg16 &= ~(1 << 10); + reg16 |= (1 << 11); /* SLP_S3# Min Assertion Width 50ms */ + + reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */ + + pci_write_config16(dev, GEN_PMCON_3, reg16); + + /* Prepare sleep mode */ + reg32 = inl(ACPI_BASE_ADDRESS + PM1_CNT); + reg32 &= ~SLP_TYP; + reg32 |= SCI_EN; + outl(reg32, ACPI_BASE_ADDRESS + PM1_CNT); + + /* Set up NMI on errors */ + reg8 = inb(0x61); + reg8 &= ~0xf0; /* Higher nibble must be 0 */ + reg8 |= (1 << 2); /* PCI SERR# disable for now */ + outb(reg8, 0x61); + + /* Disable NMI sources */ + reg8 = inb(0x70); + reg8 |= (1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ + outb(reg8, 0x70); + + /* Indicate DRAM init done for MRC */ + pci_or_config8(dev, GEN_PMCON_2, 1 << 7); + + /* Enable BIOS updates outside of SMM */ + pci_and_config8(dev, BIOS_CNTL, ~(1 << 5)); + + /* Clear status bits to prevent unexpected wake */ + RCBA32_OR(0x3310, 0x2f); + + RCBA32_AND_OR(0x3f02, ~0xf, 0); + + /* Enable PCIe Releaxed Order */ + RCBA32_OR(0x2314, (1 << 31) | (1 << 7)), + RCBA32_OR(0x1114, (1 << 15) | (1 << 14)), + + /* Setup SERIRQ, enable continuous mode */ + reg8 = pci_read_config8(dev, SERIRQ_CNTL); + reg8 |= 1 << 7; + + if (CONFIG(SERIRQ_CONTINUOUS_MODE)) + reg8 |= 1 << 6; + + pci_write_config8(dev, SERIRQ_CNTL, reg8); +} + +/* Magic register settings for power management */ +static void pch_pm_init_magic(struct device *dev) +{ + pci_write_config8(dev, 0xa9, 0x46); + + RCBA32_AND_OR(0x232c, ~1, 0); + + RCBA32_OR(0x1100, 0x0000c13f); + + RCBA32_AND_OR(0x2320, ~0x60, 0x10); + + RCBA32(0x3314) = 0x00012fff; + + RCBA32_AND_OR(0x3318, ~0x000f0330, 0x0dcf0400); + + RCBA32(0x3324) = 0x04000000; + RCBA32(0x3368) = 0x00041400; + RCBA32(0x3388) = 0x3f8ddbff; + RCBA32(0x33ac) = 0x00007001; + RCBA32(0x33b0) = 0x00181900; + RCBA32(0x33c0) = 0x00060A00; + RCBA32(0x33d0) = 0x06200840; + RCBA32(0x3a28) = 0x01010101; + RCBA32(0x3a2c) = 0x040c0404; + RCBA32(0x3a9c) = 0x9000000a; + RCBA32(0x2b1c) = 0x03808033; + RCBA32(0x2b34) = 0x80000009; + RCBA32(0x3348) = 0x022ddfff; + RCBA32(0x334c) = 0x00000001; + RCBA32(0x3358) = 0x0001c000; + RCBA32(0x3380) = 0x3f8ddbff; + RCBA32(0x3384) = 0x0001c7e1; + RCBA32(0x338c) = 0x0001c7e1; + RCBA32(0x3398) = 0x0001c000; + RCBA32(0x33a8) = 0x00181900; + RCBA32(0x33dc) = 0x00080000; + RCBA32(0x33e0) = 0x00000001; + RCBA32(0x3a20) = 0x0000040c; + RCBA32(0x3a24) = 0x01010101; + RCBA32(0x3a30) = 0x01010101; + + pci_update_config32(dev, 0xac, ~0x00200000, 0); + + RCBA32_OR(0x0410, 0x00000003); + RCBA32_OR(0x2618, 0x08000000); + RCBA32_OR(0x2300, 0x00000002); + RCBA32_OR(0x2600, 0x00000008); + + RCBA32(0x33b4) = 0x00007001; + RCBA32(0x3350) = 0x022ddfff; + RCBA32(0x3354) = 0x00000001; + + /* Power Optimizer */ + RCBA32_OR(0x33d4, 0x08000000); + RCBA32_OR(0x33c8, 0x00000080); + + RCBA32(0x2b10) = 0x0000883c; + RCBA32(0x2b14) = 0x1e0a4616; + RCBA32(0x2b24) = 0x40000005; + RCBA32(0x2b20) = 0x0005db01; + RCBA32(0x3a80) = 0x05145005; + RCBA32(0x3a84) = 0x00001005; + + RCBA32_OR(0x33d4, 0x2fff2fb1); + RCBA32_OR(0x33c8, 0x00008000); +} + +static void pch_enable_mphy(void) +{ + u32 gpio71_native = gpio_is_native(71); + u32 data_and = 0xffffffff; + u32 data_or = (1 << 14) | (1 << 13) | (1 << 12); + + if (gpio71_native) { + data_or |= (1 << 0); + if (pch_is_wpt()) { + data_and &= ~((1 << 7) | (1 << 6) | (1 << 3)); + data_or |= (1 << 5) | (1 << 4); + + if (pch_is_wpt_ulx()) { + /* Check if SATA and USB3 MPHY are enabled */ + u32 strap19 = pch_read_soft_strap(19); + strap19 &= ((1 << 31) | (1 << 30)); + strap19 >>= 30; + if (strap19 == 3) { + data_or |= (1 << 3); + printk(BIOS_DEBUG, "Enable ULX MPHY PG " + "control in single domain\n"); + } else if (strap19 == 0) { + printk(BIOS_DEBUG, "Enable ULX MPHY PG " + "control in split domains\n"); + } else { + printk(BIOS_DEBUG, "Invalid PCH Soft " + "Strap 19 configuration\n"); + } + } else { + data_or |= (1 << 3); + } + } + } + + pch_iobp_update(0xCF000000, data_and, data_or); +} + +static void pch_init_deep_sx(struct device *dev) +{ + const struct soc_intel_broadwell_pch_config *config = config_of(dev); + + if (config->deep_sx_enable_ac) { + RCBA32_OR(DEEP_S3_POL, DEEP_S3_EN_AC); + RCBA32_OR(DEEP_S5_POL, DEEP_S5_EN_AC); + } + + if (config->deep_sx_enable_dc) { + RCBA32_OR(DEEP_S3_POL, DEEP_S3_EN_DC); + RCBA32_OR(DEEP_S5_POL, DEEP_S5_EN_DC); + } + + if (config->deep_sx_enable_ac || config->deep_sx_enable_dc) + RCBA32_OR(DEEP_SX_CONFIG, + DEEP_SX_WAKE_PIN_EN | DEEP_SX_GP27_PIN_EN); +} + +/* Power Management init */ +static void pch_pm_init(struct device *dev) +{ + printk(BIOS_DEBUG, "PCH PM init\n"); + + pch_init_deep_sx(dev); + + pch_enable_mphy(); + + pch_pm_init_magic(dev); + + if (pch_is_wpt()) { + RCBA32_OR(0x33e0, (1 << 4) | (1 << 1)); + RCBA32_OR(0x2b1c, (1 << 22) | (1 << 14) | (1 << 13)); + RCBA32(0x33e4) = 0x16bf0002; + RCBA32_OR(0x33e4, 0x1); + } + + pch_iobp_update(0xCA000000, ~0UL, 0x00000009); + + /* Set RCBA 0x2b1c[29]=1 if DSP disabled */ + if (RCBA32(FD) & PCH_DISABLE_ADSPD) + RCBA32_OR(0x2b1c, (1 << 29)); + +} + +static void pch_cg_init(struct device *dev) +{ + u32 reg32; + u16 reg16; + struct device *igd_dev = pcidev_path_on_root(SA_DEVFN_IGD); + + /* DMI */ + RCBA32_OR(0x2234, 0xf); + + reg16 = pci_read_config16(dev, GEN_PMCON_1); + reg16 &= ~(1 << 10); /* Disable BIOS_PCI_EXP_EN for native PME */ + if (pch_is_wpt()) + reg16 &= ~(1 << 11); + else + reg16 |= (1 << 11); + reg16 |= (1 << 5) | (1 << 6) | (1 << 7) | (1 << 12); + reg16 |= (1 << 2); // PCI CLKRUN# Enable + pci_write_config16(dev, GEN_PMCON_1, reg16); + + /* + * RCBA + 0x2614[27:25,14:13,10,8] = 101,11,1,1 + * RCBA + 0x2614[23:16] = 0x20 + * RCBA + 0x2614[30:28] = 0x0 + * RCBA + 0x2614[26] = 1 (IF 0:2.0@0x08 >= 0x0b) + */ + RCBA32_AND_OR(0x2614, ~0x64ff0000, 0x0a206500); + + /* Check for 0:2.0@0x08 >= 0x0b */ + if (pch_is_wpt() || pci_read_config8(igd_dev, 0x8) >= 0x0b) + RCBA32_OR(0x2614, (1 << 26)); + + RCBA32_OR(0x900, 0x0000031f); + + reg32 = RCBA32(CG); + if (RCBA32(0x3454) & (1 << 4)) + reg32 &= ~(1 << 29); // LPC Dynamic + else + reg32 |= (1 << 29); // LPC Dynamic + reg32 |= (1 << 31); // LP LPC + reg32 |= (1 << 30); // LP BLA + if (RCBA32(0x3454) & (1 << 4)) + reg32 &= ~(1 << 29); + else + reg32 |= (1 << 29); + reg32 |= (1 << 28); // GPIO Dynamic + reg32 |= (1 << 27); // HPET Dynamic + reg32 |= (1 << 26); // Generic Platform Event Clock + if (RCBA32(BUC) & PCH_DISABLE_GBE) + reg32 |= (1 << 23); // GbE Static + if (RCBA32(FD) & PCH_DISABLE_HD_AUDIO) + reg32 |= (1 << 21); // HDA Static + reg32 |= (1 << 22); // HDA Dynamic + RCBA32(CG) = reg32; + + /* PCH-LP LPC */ + if (pch_is_wpt()) + RCBA32_AND_OR(0x3434, ~0x1f, 0x17); + else + RCBA32_OR(0x3434, 0x7); + + /* SPI */ + RCBA32_OR(0x38c0, 0x3c07); + + pch_iobp_update(0xCE00C000, ~1UL, 0x00000000); +} + +static void pch_set_acpi_mode(void) +{ + if (!acpi_is_wakeup_s3()) { + apm_control(APM_CNT_ACPI_DISABLE); + } +} + +static void lpc_init(struct device *dev) +{ + /* Legacy initialization */ + isa_dma_init(); + sb_rtc_init(); + pch_misc_init(dev); + + /* Interrupt configuration */ + pch_enable_ioapic(dev); + pch_pirq_init(dev); + setup_i8259(); + i8259_configure_irq_trigger(9, 1); + enable_hpet(dev); + + /* Initialize power management */ + pch_power_options(dev); + pch_pm_init(dev); + pch_cg_init(dev); + + pch_set_acpi_mode(); +} + +static void pch_lpc_add_mmio_resources(struct device *dev) +{ + u32 reg; + struct resource *res; + const u32 default_decode_base = IO_APIC_ADDR; + + /* + * Just report all resources from IO-APIC base to 4GiB. Don't mark + * them reserved as that may upset the OS if this range is marked + * as reserved in the e820. + */ + res = new_resource(dev, OIC); + res->base = default_decode_base; + res->size = 0 - default_decode_base; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + /* RCBA */ + if (default_decode_base > RCBA_BASE_ADDRESS) { + res = new_resource(dev, RCBA); + res->base = RCBA_BASE_ADDRESS; + res->size = 16 * 1024; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | + IORESOURCE_FIXED | IORESOURCE_RESERVE; + } + + /* Check LPC Memory Decode register. */ + reg = pci_read_config32(dev, LGMR); + if (reg & 1) { + reg &= ~0xffff; + if (reg < default_decode_base) { + res = new_resource(dev, LGMR); + res->base = reg; + res->size = 16 * 1024; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | + IORESOURCE_FIXED | IORESOURCE_RESERVE; + } + } +} + +/* Default IO range claimed by the LPC device. The upper bound is exclusive. */ +#define LPC_DEFAULT_IO_RANGE_LOWER 0 +#define LPC_DEFAULT_IO_RANGE_UPPER 0x1000 + +static inline int pch_io_range_in_default(int base, int size) +{ + /* Does it start above the range? */ + if (base >= LPC_DEFAULT_IO_RANGE_UPPER) + return 0; + + /* Is it entirely contained? */ + if (base >= LPC_DEFAULT_IO_RANGE_LOWER && + (base + size) < LPC_DEFAULT_IO_RANGE_UPPER) + return 1; + + /* This will return not in range for partial overlaps. */ + return 0; +} + +/* + * Note: this function assumes there is no overlap with the default LPC device's + * claimed range: LPC_DEFAULT_IO_RANGE_LOWER -> LPC_DEFAULT_IO_RANGE_UPPER. + */ +static void pch_lpc_add_io_resource(struct device *dev, u16 base, u16 size, + int index) +{ + struct resource *res; + + if (pch_io_range_in_default(base, size)) + return; + + res = new_resource(dev, index); + res->base = base; + res->size = size; + res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; +} + +static void pch_lpc_add_gen_io_resources(struct device *dev, int reg_value, + int index) +{ + /* + * Check if the register is enabled. If so and the base exceeds the + * device's default claim range add the resource. + */ + if (reg_value & 1) { + u16 base = reg_value & 0xfffc; + u16 size = (0x3 | ((reg_value >> 16) & 0xfc)) + 1; + pch_lpc_add_io_resource(dev, base, size, index); + } +} + +static void pch_lpc_add_io_resources(struct device *dev) +{ + struct resource *res; + const struct soc_intel_broadwell_pch_config *config = config_of(dev); + + /* Add the default claimed IO range for the LPC device. */ + res = new_resource(dev, 0); + res->base = LPC_DEFAULT_IO_RANGE_LOWER; + res->size = LPC_DEFAULT_IO_RANGE_UPPER - LPC_DEFAULT_IO_RANGE_LOWER; + res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + /* GPIOBASE */ + pch_lpc_add_io_resource(dev, GPIO_BASE_ADDRESS, + GPIO_BASE_SIZE, GPIO_BASE); + + /* PMBASE */ + pch_lpc_add_io_resource(dev, ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, PMBASE); + + /* LPC Generic IO Decode range. */ + pch_lpc_add_gen_io_resources(dev, config->gen1_dec, LPC_GEN1_DEC); + pch_lpc_add_gen_io_resources(dev, config->gen2_dec, LPC_GEN2_DEC); + pch_lpc_add_gen_io_resources(dev, config->gen3_dec, LPC_GEN3_DEC); + pch_lpc_add_gen_io_resources(dev, config->gen4_dec, LPC_GEN4_DEC); +} + +static void pch_lpc_read_resources(struct device *dev) +{ + struct global_nvs *gnvs; + + /* Get the normal PCI resources of this device. */ + pci_dev_read_resources(dev); + + /* Add non-standard MMIO resources. */ + pch_lpc_add_mmio_resources(dev); + + /* Add IO resources. */ + pch_lpc_add_io_resources(dev); + + /* Allocate ACPI NVS in CBMEM */ + gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof(struct global_nvs)); + if (!acpi_is_wakeup_s3() && gnvs) + memset(gnvs, 0, sizeof(struct global_nvs)); +} + +static void southcluster_inject_dsdt(const struct device *device) +{ + struct global_nvs *gnvs; + + gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); + if (!gnvs) { + gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof(*gnvs)); + if (gnvs) + memset(gnvs, 0, sizeof(*gnvs)); + } + + if (gnvs) { + acpi_create_gnvs(gnvs); + /* And tell SMI about it */ + apm_control(APM_CNT_GNVS_UPDATE); + + /* Add it to DSDT. */ + acpigen_write_scope("\\"); + acpigen_write_name_dword("NVSA", (u32) gnvs); + acpigen_pop_len(); + } +} + +static unsigned long broadwell_write_acpi_tables(const struct device *device, + unsigned long current, + struct acpi_rsdp *rsdp) +{ + if (CONFIG(INTEL_PCH_UART_CONSOLE)) + current = acpi_write_dbg2_pci_uart(rsdp, current, + (CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 1) ? + PCH_DEV_UART1 : PCH_DEV_UART0, + ACPI_ACCESS_SIZE_BYTE_ACCESS); + return acpi_write_hpet(device, current, rsdp); +} + +static struct device_operations device_ops = { + .read_resources = &pch_lpc_read_resources, + .set_resources = &pci_dev_set_resources, + .enable_resources = &pci_dev_enable_resources, + .acpi_inject_dsdt = southcluster_inject_dsdt, + .write_acpi_tables = broadwell_write_acpi_tables, + .init = &lpc_init, + .scan_bus = &scan_static_bus, + .ops_pci = &pci_dev_ops_pci, +}; + +static const unsigned short pci_device_ids[] = { + PCH_LPT_LP_SAMPLE, + PCH_LPT_LP_PREMIUM, + PCH_LPT_LP_MAINSTREAM, + PCH_LPT_LP_VALUE, + PCH_WPT_HSW_U_SAMPLE, + PCH_WPT_BDW_U_SAMPLE, + PCH_WPT_BDW_U_PREMIUM, + PCH_WPT_BDW_U_BASE, + PCH_WPT_BDW_Y_SAMPLE, + PCH_WPT_BDW_Y_PREMIUM, + PCH_WPT_BDW_Y_BASE, + PCH_WPT_BDW_H, + 0 +}; + +static const struct pci_driver pch_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; |