diff options
Diffstat (limited to 'src/soc/intel/broadwell/pch/bootblock.c')
-rw-r--r-- | src/soc/intel/broadwell/pch/bootblock.c | 115 |
1 files changed, 115 insertions, 0 deletions
diff --git a/src/soc/intel/broadwell/pch/bootblock.c b/src/soc/intel/broadwell/pch/bootblock.c new file mode 100644 index 0000000000..7f6d0d52d9 --- /dev/null +++ b/src/soc/intel/broadwell/pch/bootblock.c @@ -0,0 +1,115 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <arch/bootblock.h> +#include <device/pci_ops.h> +#include <soc/iomap.h> +#include <soc/lpc.h> +#include <soc/pci_devs.h> +#include <soc/rcba.h> +#include <soc/spi.h> +#include <soc/pm.h> +#include <soc/romstage.h> +#include <southbridge/intel/common/early_spi.h> + +static void map_rcba(void) +{ + pci_write_config32(PCH_DEV_LPC, RCBA, RCBA_BASE_ADDRESS | 1); +} + +static void enable_port80_on_lpc(void) +{ + /* Enable port 80 POST on LPC. The chipset does this by default, + * but it doesn't appear to hurt anything. */ + u32 gcs = RCBA32(GCS); + gcs = gcs & ~0x4; + RCBA32(GCS) = gcs; +} + +static void set_spi_speed(void) +{ + u32 fdod; + u8 ssfc; + + /* Observe SPI Descriptor Component Section 0 */ + SPIBAR32(SPIBAR_FDOC) = 0x1000; + + /* Extract the Write/Erase SPI Frequency from descriptor */ + fdod = SPIBAR32(SPIBAR_FDOD); + fdod >>= 24; + fdod &= 7; + + /* Set Software Sequence frequency to match */ + ssfc = SPIBAR8(SPIBAR_SSFC + 2); + ssfc &= ~7; + ssfc |= fdod; + SPIBAR8(SPIBAR_SSFC + 2) = ssfc; +} + +static void pch_enable_bars(void) +{ + /* Set up southbridge BARs */ + pci_write_config32(PCH_DEV_LPC, RCBA, RCBA_BASE_ADDRESS | 1); + + pci_write_config32(PCH_DEV_LPC, PMBASE, ACPI_BASE_ADDRESS | 1); + + pci_write_config8(PCH_DEV_LPC, ACPI_CNTL, ACPI_EN); + + pci_write_config32(PCH_DEV_LPC, GPIO_BASE, GPIO_BASE_ADDRESS | 1); + + /* Enable GPIO functionality. */ + pci_write_config8(PCH_DEV_LPC, GPIO_CNTL, GPIO_EN); +} + +static void pch_early_lpc(void) +{ + pch_enable_bars(); + + /* Set COM1/COM2 decode range */ + pci_write_config16(PCH_DEV_LPC, LPC_IO_DEC, 0x0010); + + /* Enable SuperIO + MC + COM1 + PS/2 Keyboard/Mouse */ + u16 lpc_config = CNF1_LPC_EN | CNF2_LPC_EN | GAMEL_LPC_EN | + COMA_LPC_EN | KBC_LPC_EN | MC_LPC_EN; + pci_write_config16(PCH_DEV_LPC, LPC_EN, lpc_config); + + /* Enable IOAPIC */ + RCBA16(OIC) = 0x0100; + + /* Read back for posted write */ + (void)RCBA16(OIC); + + /* Set HPET address and enable it */ + RCBA32_AND_OR(HPTC, ~3, 1 << 7); + + /* + * Reading the register back guarantees that the write is + * done before we use the configured base address below. + */ + (void)RCBA32(HPTC); + + /* Enable HPET to start counter */ + setbits32((void *)HPET_BASE_ADDRESS + 0x10, 1 << 0); + + /* Disable reset */ + RCBA32_OR(GCS, 1 << 5); + + /* TCO timer halt */ + u16 reg16 = inb(ACPI_BASE_ADDRESS + TCO1_CNT); + reg16 |= TCO_TMR_HLT; + outb(reg16, ACPI_BASE_ADDRESS + TCO1_CNT); + + /* Enable upper 128 bytes of CMOS */ + RCBA32_OR(RC, 1 << 2); + + /* Disable unused device (always) */ + RCBA32_OR(FD, PCH_DISABLE_ALWAYS); +} + +void bootblock_early_southbridge_init(void) +{ + map_rcba(); + enable_spi_prefetching_and_caching(); + enable_port80_on_lpc(); + set_spi_speed(); + pch_early_lpc(); +} |