1 files changed, 107 insertions, 0 deletions
diff --git a/src/soc/intel/braswell/Makefile.inc b/src/soc/intel/braswell/Makefile.inc
new file mode 100644
index 0000000000..0806bbb532
--- /dev/null
+++ b/src/soc/intel/braswell/Makefile.inc
@@ -0,0 +1,107 @@
+ifeq ($(CONFIG_SOC_INTEL_BRASWELL),y)
+
+subdirs-y += bootblock
+subdirs-y += microcode
+subdirs-y += romstage
+subdirs-y += ../../../cpu/x86/lapic
+subdirs-y += ../../../cpu/x86/mtrr
+subdirs-y += ../../../cpu/x86/smm
+subdirs-y += ../../../cpu/x86/tsc
+subdirs-y += ../../../cpu/intel/microcode
+subdirs-y += ../../../cpu/intel/turbo
+
+ramstage-y += memmap.c
+romstage-y += memmap.c
+ramstage-y += tsc_freq.c
+romstage-y += tsc_freq.c
+smm-y += tsc_freq.c
+ramstage-y += spi.c
+smm-y += spi.c
+ramstage-y += chip.c
+ramstage-y += gfx.c
+ramstage-y += iosf.c
+romstage-y += iosf.c
+smm-y += iosf.c
+ramstage-y += northcluster.c
+ramstage-y += ramstage.c
+ramstage-y += gpio.c
+romstage-y += reset.c
+ramstage-y += reset.c
+ramstage-y += cpu.c
+ramstage-y += pmutil.c
+smm-y += pmutil.c
+smm-y += smihandler.c
+ramstage-y += smm.c
+ramstage-y += ehci.c
+ramstage-y += xhci.c
+ramstage-y += southcluster.c
+ramstage-$(CONFIG_HAVE_REFCODE_BLOB) += refcode.c
+ramstage-y += sata.c
+ramstage-y += acpi.c
+ramstage-y += lpe.c
+ramstage-y += scc.c
+ramstage-y += emmc.c
+ramstage-y += lpss.c
+ramstage-y += pcie.c
+ramstage-y += sd.c
+ramstage-y += dptf.c
+ramstage-y += perf_power.c
+ramstage-y += stage_cache.c
+romstage-y += stage_cache.c
+ramstage-$(CONFIG_ELOG) += elog.c
+ramstage-y += hda.c
+
+# Remove as ramstage gets fleshed out
+ramstage-y += placeholders.c
+
+CPPFLAGS_common += -Isrc/soc/intel/baytrail/include
+
+# Run an intermediate step when producing coreboot.rom
+# that adds additional components to the final firmware
+# image outside of CBFS
+INTERMEDIATE:=baytrail_add_me
+
+ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y)
+IFD_BIN_PATH := $(objgenerated)/ifdfake.bin
+IFD_SECTIONS := $(addprefix -b ,$(CONFIG_IFD_BIOS_SECTION:"%"=%)) \
+		$(addprefix -m ,$(CONFIG_IFD_ME_SECTION:"%"=%)) \
+		$(addprefix -p ,$(CONFIG_IFD_PLATFORM_SECTION:"%"=%))
+else
+IFD_BIN_PATH := $(CONFIG_IFD_BIN_PATH)
+endif
+
+baytrail_add_me: $(obj)/coreboot.pre $(IFDTOOL) $(IFDFAKE)
+ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y)
+	printf "\n** WARNING **\n"
+	printf "Coreboot will be built with a fake Intel Firmware Descriptor (IFD).\n"
+	printf "Never write a complete coreboot.rom with a fake IFD to your board's\n"
+	printf "flash ROM! Make sure that you only write valid flash regions.\n\n"
+	printf "    IFDFAKE    Building a fake Intel Firmware Descriptor\n"
+	$(IFDFAKE) $(IFD_SECTIONS) $(IFD_BIN_PATH)
+endif
+	printf "    DD         Adding Intel Firmware Descriptor\n"
+	dd if=$(IFD_BIN_PATH) \
+		of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1
+ifeq ($(CONFIG_HAVE_ME_BIN),y)
+	printf "    IFDTOOL    me.bin -> coreboot.pre\n"
+	$(objutil)/ifdtool/ifdtool \
+		-i ME:$(CONFIG_ME_BIN_PATH) \
+		$(obj)/coreboot.pre
+	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
+endif
+
+# If an MRC file is an ELF file determine the entry address and first loadable
+# section offset in the file. Subtract the offset from the entry address to
+# determine the final location.
+mrcelfoffset = $(shell $(READELF_x86_32) -S -W $(CONFIG_MRC_FILE) | sed -e 's/\[ /[0/' | awk '$$3 ~ /PROGBITS/ { print "0x"$$5; exit }' )
+mrcelfentry = $(shell $(READELF_x86_32) -h -W $(CONFIG_MRC_FILE) | grep 'Entry point address' | awk '{print $$NF }')
+
+# Add memory reference code blob.
+cbfs-files-$(CONFIG_HAVE_MRC) += mrc.bin
+mrc.bin-file := $(call strip_quotes,$(CONFIG_MRC_FILE))
+mrc.bin-position := $(if $(findstring elf,$(CONFIG_MRC_FILE)),$(shell printf "0x%x" $$(( $(mrcelfentry) - $(mrcelfoffset) )) ),$(CONFIG_MRC_BIN_ADDRESS))
+mrc.bin-type := mrc
+
+PHONY += baytrail_add_me
+
+endif