diff options
Diffstat (limited to 'src/soc/imgtec/pistachio/uart.c')
-rw-r--r-- | src/soc/imgtec/pistachio/uart.c | 158 |
1 files changed, 0 insertions, 158 deletions
diff --git a/src/soc/imgtec/pistachio/uart.c b/src/soc/imgtec/pistachio/uart.c deleted file mode 100644 index d5042d546d..0000000000 --- a/src/soc/imgtec/pistachio/uart.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Eric Biederman - * Copyright (C) 2006-2010 coresystems GmbH - * Copyright (C) 2014 Imagination Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/mmio.h> -#include <boot/coreboot_tables.h> -#include <console/uart.h> -#include <device/device.h> -#include <delay.h> -#include <drivers/uart/uart8250reg.h> - -/* Should support 8250, 16450, 16550, 16550A type UARTs */ - -/* Expected character delay at 1200bps is 9ms for a working UART - * and no flow-control. Assume UART as stuck if shift register - * or FIFO takes more than 50ms per character to appear empty. - */ -#define SINGLE_CHAR_TIMEOUT (50 * 1000) -#define FIFO_TIMEOUT (16 * SINGLE_CHAR_TIMEOUT) -#define UART_SHIFT 2 - -#define GEN_ACCESSOR(name, idx) \ -static inline uint8_t read_##name(unsigned int base_port) \ -{ \ - return read8((void *)(base_port + (idx << UART_SHIFT))); \ -} \ - \ -static inline void write_##name(unsigned int base_port, uint8_t val) \ -{ \ - write8((void *)(base_port + (idx << UART_SHIFT)), val); \ -} - -GEN_ACCESSOR(rbr, UART8250_RBR) -GEN_ACCESSOR(tbr, UART8250_TBR) -GEN_ACCESSOR(ier, UART8250_IER) -GEN_ACCESSOR(fcr, UART8250_FCR) -GEN_ACCESSOR(lcr, UART8250_LCR) -GEN_ACCESSOR(mcr, UART8250_MCR) -GEN_ACCESSOR(lsr, UART8250_LSR) -GEN_ACCESSOR(dll, UART8250_DLL) -GEN_ACCESSOR(dlm, UART8250_DLM) - -static int uart8250_mem_can_tx_byte(unsigned int base_port) -{ - return read_lsr(base_port) & UART8250_LSR_THRE; -} - -static void uart8250_mem_tx_byte(unsigned int base_port, unsigned char data) -{ - unsigned long int i = SINGLE_CHAR_TIMEOUT; - while (i-- && !uart8250_mem_can_tx_byte(base_port)) - udelay(1); - write_tbr(base_port, data); -} - -static void uart8250_mem_tx_flush(unsigned int base_port) -{ - unsigned long int i = FIFO_TIMEOUT; - while (i-- && !(read_lsr(base_port) & UART8250_LSR_TEMT)) - udelay(1); -} - -static int uart8250_mem_can_rx_byte(unsigned int base_port) -{ - return read_lsr(base_port) & UART8250_LSR_DR; -} - -static unsigned char uart8250_mem_rx_byte(unsigned int base_port) -{ - unsigned long int i = SINGLE_CHAR_TIMEOUT; - while (i-- && !uart8250_mem_can_rx_byte(base_port)) - udelay(1); - if (i) - return read_rbr(base_port); - else - return 0x0; -} - -static void uart8250_mem_init(unsigned int base_port, unsigned int divisor) -{ - /* Disable interrupts */ - write_ier(base_port, 0x0); - /* Enable FIFOs */ - write_fcr(base_port, UART8250_FCR_FIFO_EN); - - /* Assert DTR and RTS so the other end is happy */ - write_mcr(base_port, UART8250_MCR_DTR | UART8250_MCR_RTS); - - /* DLAB on */ - write_lcr(base_port, UART8250_LCR_DLAB | CONFIG_TTYS0_LCS); - - write_dll(base_port, divisor & 0xFF); - write_dlm(base_port, (divisor >> 8) & 0xFF); - - /* Set to 3 for 8N1 */ - write_lcr(base_port, CONFIG_TTYS0_LCS); -} - -unsigned int uart_platform_refclk(void) -{ - /* 1.8433179 MHz */ - return 1843318; -} - -void uart_init(int idx) -{ - u32 base = CONFIG_CONSOLE_SERIAL_UART_ADDRESS; - if (!base) - return; - - unsigned int div; - div = uart_baudrate_divisor(get_uart_baudrate(), - uart_platform_refclk(), 16); - uart8250_mem_init(base, div); -} - -void uart_tx_byte(int idx, unsigned char data) -{ - uart8250_mem_tx_byte(CONFIG_CONSOLE_SERIAL_UART_ADDRESS, data); -} - -unsigned char uart_rx_byte(int idx) -{ - return uart8250_mem_rx_byte(CONFIG_CONSOLE_SERIAL_UART_ADDRESS); -} - -void uart_tx_flush(int idx) -{ - uart8250_mem_tx_flush(CONFIG_CONSOLE_SERIAL_UART_ADDRESS); -} - -void uart_fill_lb(void *data) -{ - struct lb_serial serial; - serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED; - serial.baseaddr = CONFIG_CONSOLE_SERIAL_UART_ADDRESS; - serial.baud = get_uart_baudrate(); - serial.regwidth = 1 << UART_SHIFT; - serial.input_hertz = uart_platform_refclk(); - serial.uart_pci_addr = CONFIG_UART_PCI_ADDR; - lb_add_serial(&serial, data); - - lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data); -} |