diff options
Diffstat (limited to 'src/soc/amd')
| -rw-r--r-- | src/soc/amd/common/block/include/amdblocks/espi.h | 7 | ||||
| -rw-r--r-- | src/soc/amd/common/block/lpc/espi_util.c | 21 |
2 files changed, 28 insertions, 0 deletions
diff --git a/src/soc/amd/common/block/include/amdblocks/espi.h b/src/soc/amd/common/block/include/amdblocks/espi.h index c593e02d49..7ca5b05e32 100644 --- a/src/soc/amd/common/block/include/amdblocks/espi.h +++ b/src/soc/amd/common/block/include/amdblocks/espi.h @@ -107,6 +107,13 @@ int espi_open_mmio_window(uint32_t base, size_t size); void espi_configure_decodes(void); /* + * Clear all configured eSPI memory and I/O decode ranges. This is useful for changing + * the decodes, or if something else has previously setup decode windows that conflict + * with the windows that coreboot needs. + */ +void espi_clear_decodes(void); + +/* * In cases where eSPI BAR is statically provided by SoC, use that BAR instead of reading * SPIBASE. This is required for cases where verstage runs on PSP. */ diff --git a/src/soc/amd/common/block/lpc/espi_util.c b/src/soc/amd/common/block/lpc/espi_util.c index 0878fb7663..152cdd9001 100644 --- a/src/soc/amd/common/block/lpc/espi_util.c +++ b/src/soc/amd/common/block/lpc/espi_util.c @@ -98,6 +98,27 @@ static int espi_get_unused_io_window(void) return -1; } +void espi_clear_decodes(void) +{ + unsigned int idx; + + /* First turn off all enable bits, then zero base, range, and size registers */ + /* + * There is currently a bug where the SMU will lock up at times if the port80h enable + * bit is cleared. See b/183974365 + */ + espi_write16(ESPI_DECODE, (espi_read16(ESPI_DECODE) & ESPI_DECODE_IO_0x80_EN)); + + for (idx = 0; idx < ESPI_GENERIC_IO_WIN_COUNT; idx++) { + espi_write16(ESPI_IO_RANGE_BASE(idx), 0); + espi_write8(ESPI_IO_RANGE_SIZE(idx), 0); + } + for (idx = 0; idx < ESPI_GENERIC_MMIO_WIN_COUNT; idx++) { + espi_write32(ESPI_MMIO_RANGE_BASE(idx), 0); + espi_write16(ESPI_MMIO_RANGE_SIZE(idx), 0); + } +} + /* * Returns decode enable bits for standard IO port addresses. If port address is not supported * by standard decode or if the size of window is not 1, then it returns -1. |