diff options
Diffstat (limited to 'src/soc/amd')
| -rw-r--r-- | src/soc/amd/common/block/uart/Kconfig | 57 | ||||
| -rw-r--r-- | src/soc/amd/picasso/Kconfig | 48 |
2 files changed, 58 insertions, 47 deletions
diff --git a/src/soc/amd/common/block/uart/Kconfig b/src/soc/amd/common/block/uart/Kconfig new file mode 100644 index 0000000000..599594ba5e --- /dev/null +++ b/src/soc/amd/common/block/uart/Kconfig @@ -0,0 +1,57 @@ +config SOC_AMD_COMMON_BLOCK_UART + bool + default n + help + Select this option to add the common functions for setting up the + UART configuration to the build. + +if SOC_AMD_COMMON_BLOCK_UART + +config AMD_SOC_CONSOLE_UART + bool "Use integrated AMD SoC UART controller for console" + default n + select DRIVERS_UART_8250MEM + select DRIVERS_UART_8250MEM_32 + select NO_UART_ON_SUPERIO + select UART_OVERRIDE_REFCLK + help + There are four memory-mapped UARTs controllers at: + 0: 0xfedc9000 + 1: 0xfedca000 + 2: 0xfedc3000 + 3: 0xfedcf000 + +choice + prompt "UART Frequency" + depends on AMD_SOC_CONSOLE_UART + default AMD_SOC_UART_48MZ + +config AMD_SOC_UART_48MZ + bool "48 MHz clock" + help + Select this option for the most compatibility. + +config AMD_SOC_UART_1_8MZ + bool "1.8432 MHz clock" + help + Select this option if an old payload or Linux ttyS0 arguments require + a 1.8432 MHz clock source for the UART. + +endchoice + +config AMD_SOC_UART_LEGACY + bool "Decode legacy I/O range" + help + Assign I/O 3F8, 2F8, etc. to an integrated AMD SoC UART. A UART + accessed with I/O does not allow all the features of MMIO. The MMIO + decode is still present when this option is used. + +config CONSOLE_UART_BASE_ADDRESS + depends on CONSOLE_SERIAL && AMD_SOC_CONSOLE_UART + hex + default 0xfedc9000 if UART_FOR_CONSOLE = 0 + default 0xfedca000 if UART_FOR_CONSOLE = 1 + default 0xfedc3000 if UART_FOR_CONSOLE = 2 + default 0xfedcf000 if UART_FOR_CONSOLE = 3 + +endif # SOC_AMD_COMMON_BLOCK_UART diff --git a/src/soc/amd/picasso/Kconfig b/src/soc/amd/picasso/Kconfig index c4c7baeaeb..e9930e9998 100644 --- a/src/soc/amd/picasso/Kconfig +++ b/src/soc/amd/picasso/Kconfig @@ -42,6 +42,7 @@ config CPU_SPECIFIC_OPTIONS select SOC_AMD_COMMON_BLOCK_SMI select SOC_AMD_COMMON_BLOCK_SMU select SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H + select SOC_AMD_COMMON_BLOCK_UART select SOC_AMD_COMMON_BLOCK_PSP_GEN2 select PROVIDES_ROM_SHARING select BOOT_DEVICE_SUPPORTS_WRITES if BOOT_DEVICE_SPI_FLASH @@ -273,53 +274,6 @@ config PICASSO_ACPI_IO_BASE help Base address for the ACPI registers. -config AMD_SOC_CONSOLE_UART - bool "Use Picasso UART controller for console" - default n - select DRIVERS_UART_8250MEM - select DRIVERS_UART_8250MEM_32 - select NO_UART_ON_SUPERIO - select UART_OVERRIDE_REFCLK - help - There are four memory-mapped UARTs controllers in Picasso at: - 0: 0xfedc9000 - 1: 0xfedca000 - 2: 0xfedc3000 - 3: 0xfedcf000 - -choice - prompt "UART Frequency" - depends on AMD_SOC_CONSOLE_UART - default AMD_SOC_UART_48MZ - -config AMD_SOC_UART_48MZ - bool "48 MHz clock" - help - Select this option for the most compatibility. - -config AMD_SOC_UART_1_8MZ - bool "1.8432 MHz clock" - help - Select this option if an old payload or Linux ttyS0 arguments - require it. - -endchoice - -config AMD_SOC_UART_LEGACY - bool "Decode legacy I/O range" - help - Assign I/O 3F8, 2F8, etc. to a Picasso UART. A UART accessed with I/O - does not allow all the features of MMIO. The MMIO decode is still - present when this option is used. - -config CONSOLE_UART_BASE_ADDRESS - depends on CONSOLE_SERIAL && AMD_SOC_CONSOLE_UART - hex - default 0xfedc9000 if UART_FOR_CONSOLE = 0 - default 0xfedca000 if UART_FOR_CONSOLE = 1 - default 0xfedc3000 if UART_FOR_CONSOLE = 2 - default 0xfedcf000 if UART_FOR_CONSOLE = 3 - config SMM_TSEG_SIZE hex default 0x800000 if SMM_TSEG && HAVE_SMI_HANDLER |