diff options
Diffstat (limited to 'src/soc/amd')
| -rw-r--r-- | src/soc/amd/common/block/include/amdblocks/fch_spi.h | 87 | ||||
| -rw-r--r-- | src/soc/amd/common/block/include/amdblocks/lpc.h | 8 | ||||
| -rw-r--r-- | src/soc/amd/common/block/spi/Kconfig | 11 | ||||
| -rw-r--r-- | src/soc/amd/common/block/spi/Makefile.inc | 30 | ||||
| -rw-r--r-- | src/soc/amd/common/block/spi/fch_spi_ctrl.c | 427 | ||||
| -rw-r--r-- | src/soc/amd/common/block/spi/fch_spi_flash.c | 246 | ||||
| -rw-r--r-- | src/soc/amd/common/block/spi/fch_spi_special.c | 89 | ||||
| -rw-r--r-- | src/soc/amd/common/block/spi/fch_spi_table.c | 83 |
8 files changed, 981 insertions, 0 deletions
diff --git a/src/soc/amd/common/block/include/amdblocks/fch_spi.h b/src/soc/amd/common/block/include/amdblocks/fch_spi.h new file mode 100644 index 0000000000..24cfbfc74a --- /dev/null +++ b/src/soc/amd/common/block/include/amdblocks/fch_spi.h @@ -0,0 +1,87 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Silverback Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _FCH_SPI_H_ +#define _FCH_SPI_H_ + +#include <stdint.h> +#include <stddef.h> + +#define GRANULARITY_TEST_4k 0x0000f000 /* bits 15-12 */ +#define WORD_TO_DWORD_UPPER(x) ((x << 16) & 0xffff0000) +#define SPI_PAGE_WRITE 0x02 +#define SPI_WRITE_ENABLE 0x06 +#define IDCODE_CONT_LEN 0 +#define IDCODE_PART_LEN 5 +#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN) + +/* SPI MMIO registers */ +#define SPI_CNTRL0 0x00 +#define SPI_ACCESS_MAC_ROM_EN BIT(22) +#define SPI_RESTRICTED_CMD1 0x04 +#define SPI_RESTRICTED_CMD2 0x08 +#define SPI_CNTRL1 0x0c +#define SPI_CMD_CODE 0x45 +#define SPI_CMD_TRIGGER 0x47 + +/* Special SST write commands */ +#define CMD_SST_BP 0x02 /* Byte Program */ +#define CMD_SST_AAI_WP 0xad /* Auto Address Increment Word Program */ + +#define SST_256 0x004b /* Only SST that programs 256 bytes at once */ + +enum non_standard_spi { + NON_STANDARD_SPI_NONE = 0, + NON_STANDARD_SPI_SST, +}; + +struct spi_flash_table { + const u8 shift; + const u8 idcode; + int (*probe)(const struct spi_slave *spi, u8 *idcode, + struct spi_flash *flash); +}; + +struct spi_data { + const char *name; + u32 size; + u32 sector_size; + u32 page_size; + u8 status_cmd; + u8 erase_cmd; + u8 write_cmd; + u8 write_enable_cmd; + u8 read_cmd; + u8 read_cmd_len; + enum non_standard_spi non_standard; +}; + +void fch_spi_init(void); +void fch_spi_flash_ops_init(struct spi_flash *flash); +int fch_spi_flash_cmd(const void *dout, size_t bytes_out, void *din, size_t bytes_in); +int fch_spi_flash_cmd_write(const u8 *cmd, size_t cmd_len, const void *data, size_t data_len); +int fch_spi_wait_cmd_ready(unsigned long timeout); +int non_standard_sst_byte_write(u32 offset, const void *buf); +int non_standard_sst_write_aai(u32 offset, size_t len, const void *buf, size_t start); +const struct spi_flash_table *get_spi_flash_table(int *table_size); +const struct spi_data *get_ctrl_spi_data(void); + +static inline int fch_spi_enable_write(void) +{ + u8 cmd_enable = SPI_WRITE_ENABLE; + return fch_spi_flash_cmd(&cmd_enable, 1, NULL, 0); +} + +#endif /* _FCH_SPI_H_ */ diff --git a/src/soc/amd/common/block/include/amdblocks/lpc.h b/src/soc/amd/common/block/include/amdblocks/lpc.h index f956ba3aa9..11880eb3e6 100644 --- a/src/soc/amd/common/block/include/amdblocks/lpc.h +++ b/src/soc/amd/common/block/include/amdblocks/lpc.h @@ -90,6 +90,14 @@ #define DECODE_IO_PORT_ENABLE0_H BIT(0) #define LPC_MEM_PORT1 0x4c +#define ROM_PROTECT_RANGE0 0x50 +#define ROM_BASE_MASK 0xfffff000 /* bits 31-12 */ +#define ROM_RANGE_WP BIT(10) +#define ROM_RANGE_RP BIT(9) +#define RANGE_UNIT BIT(8) +#define RANGE_ADDR_MASK 0x000000ff /* Range defined by bits 7-0 */ +#define ROM_PROTECT_RANGE_REG(n) (ROM_PROTECT_RANGE0 + (4 * n)) +#define MAX_ROM_PROTECT_RANGES 4 #define LPC_MEM_PORT0 0x60 /* Register 0x64 is 32-bit, composed by two 16-bit sub-registers. diff --git a/src/soc/amd/common/block/spi/Kconfig b/src/soc/amd/common/block/spi/Kconfig new file mode 100644 index 0000000000..785e6da6b3 --- /dev/null +++ b/src/soc/amd/common/block/spi/Kconfig @@ -0,0 +1,11 @@ +config SOC_AMD_COMMON_BLOCK_SPI + bool + default n + help + Select this option to add FCH SPI controller functions to the build. + This overwrites the structure spi_flash_ops to use FCH SPI code + instead of individual SPI specific code. + +config SOC_AMD_COMMON_BLOCK_SPI_DEBUG + bool + default n diff --git a/src/soc/amd/common/block/spi/Makefile.inc b/src/soc/amd/common/block/spi/Makefile.inc new file mode 100644 index 0000000000..b94eda405a --- /dev/null +++ b/src/soc/amd/common/block/spi/Makefile.inc @@ -0,0 +1,30 @@ +ifeq ($(CONFIG_SOC_AMD_COMMON_BLOCK_SPI),y) + +bootblock-y += fch_spi_ctrl.c +bootblock-y += fch_spi_flash.c +bootblock-y += fch_spi_special.c +bootblock-y += fch_spi_table.c +romstage-y += fch_spi_ctrl.c +romstage-y += fch_spi_flash.c +romstage-y += fch_spi_special.c +romstage-y += fch_spi_table.c +verstage-y += fch_spi_ctrl.c +verstage-y += fch_spi_flash.c +verstage-y += fch_spi_special.c +verstage-y += fch_spi_table.c +postcar-y += fch_spi_ctrl.c +postcar-y += fch_spi_flash.c +postcar-y += fch_spi_special.c +postcar-y += fch_spi_table.c +ramstage-y += fch_spi_ctrl.c +ramstage-y += fch_spi_flash.c +ramstage-y += fch_spi_special.c +ramstage-y += fch_spi_table.c +ifeq ($(CONFIG_SPI_FLASH_SMM),y) +smm-y += fch_spi_ctrl.c +smm-y += fch_spi_flash.c +smm-y += fch_spi_special.c +smm-y += fch_spi_table.c +endif + +endif diff --git a/src/soc/amd/common/block/spi/fch_spi_ctrl.c b/src/soc/amd/common/block/spi/fch_spi_ctrl.c new file mode 100644 index 0000000000..4299e4f5c3 --- /dev/null +++ b/src/soc/amd/common/block/spi/fch_spi_ctrl.c @@ -0,0 +1,427 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Silverback Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <spi_flash.h> +#include <soc/southbridge.h> +#include <soc/pci_devs.h> +#include <amdblocks/fch_spi.h> +#include <amdblocks/lpc.h> +#include <drivers/spi/spi_flash_internal.h> +#include <device/pci_ops.h> +#include <timer.h> +#include <lib.h> + +static struct spi_data ctrl_spi_data; +static uint32_t spibar; + +static inline uint8_t spi_read8(uint8_t reg) +{ + return read8((void *)(spibar + reg)); +} + +static inline uint32_t spi_read32(uint8_t reg) +{ + return read32((void *)(spibar + reg)); +} + +static inline void spi_write8(uint8_t reg, uint8_t val) +{ + write8((void *)(spibar + reg), val); +} + +static inline void spi_write32(uint8_t reg, uint32_t val) +{ + write32((void *)(spibar + reg), val); +} + +static void dump_state(const char *str, u8 phase) +{ + u8 dump_size; + u32 addr; + + if (!CONFIG(SOC_AMD_COMMON_BLOCK_SPI_DEBUG)) + return; + + printk(BIOS_DEBUG, "SPI: %s\n", str); + printk(BIOS_DEBUG, "Cntrl0: %x\n", spi_read32(SPI_CNTRL0)); + printk(BIOS_DEBUG, "Status: %x\n", spi_read32(SPI_STATUS)); + + addr = spibar + SPI_FIFO; + if (phase == 0) { + dump_size = spi_read8(SPI_TX_BYTE_COUNT); + printk(BIOS_DEBUG, "TxByteCount: %x\n", dump_size); + printk(BIOS_DEBUG, "CmdCode: %x\n", spi_read8(SPI_CMD_CODE)); + } else { + dump_size = spi_read8(SPI_RX_BYTE_COUNT); + printk(BIOS_DEBUG, "RxByteCount: %x\n", dump_size); + addr += spi_read8(SPI_TX_BYTE_COUNT); + } + + if (dump_size > 0) + hexdump((void *)addr, dump_size); +} + +static int wait_for_ready(void) +{ + const uint32_t timeout_ms = 500; + struct stopwatch sw; + + stopwatch_init_msecs_expire(&sw, timeout_ms); + + do { + if (!(spi_read32(SPI_STATUS) & SPI_BUSY)) + return 0; + } while (!stopwatch_expired(&sw)); + + return -1; +} + +static int execute_command(void) +{ + dump_state("Before execute", 0); + + spi_write8(SPI_CMD_TRIGGER, SPI_CMD_TRIGGER_EXECUTE); + + if (wait_for_ready()) + printk(BIOS_ERR, + "FCH_SC Error: Timeout executing command\n"); + + dump_state("Transaction finished", 1); + + return 0; +} + +void spi_init(void) +{ + spibar = lpc_get_spibase(); + printk(BIOS_DEBUG, "%s: Spibar at 0x%08x\n", __func__, spibar); +} + +const struct spi_data *get_ctrl_spi_data(void) +{ + return &ctrl_spi_data; +} + +static int spi_ctrlr_xfer(const void *dout, size_t bytesout, void *din, size_t bytesin) +{ + size_t count; + uint8_t cmd; + uint8_t *bufin = din; + const uint8_t *bufout = dout; + + if (CONFIG(SOC_AMD_COMMON_BLOCK_SPI_DEBUG)) + printk(BIOS_DEBUG, "%s(%zx, %zx)\n", __func__, bytesout, + bytesin); + + /* First byte is cmd which cannot be sent through FIFO */ + cmd = bufout[0]; + bufout++; + bytesout--; + + /* + * Check if this is a write command attempting to transfer more bytes + * than the controller can handle. Iterations for writes are not + * supported here because each SPI write command needs to be preceded + * and followed by other SPI commands. + */ + if (bytesout + bytesin > SPI_FIFO_DEPTH) { + printk(BIOS_WARNING, "FCH_SC: Too much to transfer, code error!\n"); + return -1; + } + + if (wait_for_ready()) + return -1; + + spi_write8(SPI_CMD_CODE, cmd); + spi_write8(SPI_TX_BYTE_COUNT, bytesout); + spi_write8(SPI_RX_BYTE_COUNT, bytesin); + + for (count = 0; count < bytesout; count++) + spi_write8(SPI_FIFO + count, bufout[count]); + + if (execute_command()) + return -1; + + for (count = 0; count < bytesin; count++) + bufin[count] = spi_read8(SPI_FIFO + count + bytesout); + + return 0; +} + +static int amd_xfer_vectors(struct spi_op vectors[], size_t count) +{ + int ret; + void *din; + size_t bytes_in; + + if (count < 1 || count > 2) + return -1; + + /* SPI flash commands always have a command first... */ + if (!vectors[0].dout || !vectors[0].bytesout) + return -1; + /* And not read any data during the command. */ + if (vectors[0].din || vectors[0].bytesin) + return -1; + + if (count == 2) { + /* If response bytes requested ensure the buffer is valid. */ + if (vectors[1].bytesin && !vectors[1].din) + return -1; + /* No sends can accompany a receive. */ + if (vectors[1].dout || vectors[1].bytesout) + return -1; + din = vectors[1].din; + bytes_in = vectors[1].bytesin; + } else { + din = NULL; + bytes_in = 0; + } + + ret = spi_ctrlr_xfer(vectors[0].dout, vectors[0].bytesout, din, bytes_in); + + if (ret) { + vectors[0].status = SPI_OP_FAILURE; + if (count == 2) + vectors[1].status = SPI_OP_FAILURE; + } else { + vectors[0].status = SPI_OP_SUCCESS; + if (count == 2) + vectors[1].status = SPI_OP_SUCCESS; + } + + return ret; +} + +int fch_spi_flash_cmd(const void *dout, size_t bytes_out, void *din, size_t bytes_in) +{ + /* + * SPI flash requires command-response kind of behavior. Thus, two + * separate SPI vectors are required -- first to transmit dout and other + * to receive in din. + */ + struct spi_op vectors[] = { + [0] = { .dout = dout, .bytesout = bytes_out, + .din = NULL, .bytesin = 0, }, + [1] = { .dout = NULL, .bytesout = 0, + .din = din, .bytesin = bytes_in }, + }; + size_t count = ARRAY_SIZE(vectors); + if (!bytes_in) + count = 1; + + return amd_xfer_vectors(vectors, count); +} + +static void set_ctrl_spi_data(struct spi_flash *flash) +{ + u8 cmd = SPI_PAGE_WRITE; + + ctrl_spi_data.name = flash->name; + ctrl_spi_data.size = flash->size; + ctrl_spi_data.sector_size = flash->sector_size; + ctrl_spi_data.status_cmd = flash->status_cmd; + ctrl_spi_data.erase_cmd = flash->erase_cmd; + ctrl_spi_data.write_enable_cmd = SPI_WRITE_ENABLE; + + if (flash->vendor == VENDOR_ID_SST) { + ctrl_spi_data.non_standard = NON_STANDARD_SPI_SST; + if ((flash->model & 0x00ff) == SST_256) + ctrl_spi_data.page_size = 256; + else { + ctrl_spi_data.page_size = 2; + cmd = CMD_SST_AAI_WP; + } + } else { + ctrl_spi_data.page_size = flash->page_size; + ctrl_spi_data.non_standard = NON_STANDARD_SPI_NONE; + } + ctrl_spi_data.write_cmd = cmd; + + if (CONFIG(SPI_FLASH_NO_FAST_READ)) { + ctrl_spi_data.read_cmd_len = 4; + ctrl_spi_data.read_cmd = CMD_READ_ARRAY_SLOW; + } else { + ctrl_spi_data.read_cmd_len = 5; + ctrl_spi_data.read_cmd = CMD_READ_ARRAY_FAST; + } +} + +static int fch_spi_flash_probe(const struct spi_slave *spi, struct spi_flash *flash) +{ + int ret, i, shift, table_size; + u8 idcode[IDCODE_LEN], *idp, cmd = CMD_READ_ID; + const struct spi_flash_table *flash_ptr = get_spi_flash_table(&table_size); + + /* Read the ID codes */ + ret = fch_spi_flash_cmd(&cmd, 1, idcode, sizeof(idcode)); + if (ret) + return -1; + + if (CONFIG(SOC_AMD_COMMON_BLOCK_SPI_DEBUG)) { + printk(BIOS_SPEW, "SF: Got idcode: "); + for (i = 0; i < sizeof(idcode); i++) + printk(BIOS_SPEW, "%02x ", idcode[i]); + printk(BIOS_SPEW, "\n"); + } + + /* count the number of continuation bytes */ + for (shift = 0, idp = idcode; shift < IDCODE_CONT_LEN && *idp == 0x7f; + ++shift, ++idp) + continue; + + printk(BIOS_INFO, "Manufacturer: %02x\n", *idp); + + /* search the table for matches in shift and id */ + for (i = 0; i < table_size; ++i) { + if (flash_ptr->shift == shift && flash_ptr->idcode == *idp) { + /* we have a match, call probe */ + if (flash_ptr->probe(spi, idp, flash) == 0) { + flash->vendor = idp[0]; + flash->model = (idp[1] << 8) | idp[2]; + set_ctrl_spi_data(flash); + fch_spi_flash_ops_init(flash); + return 0; + } + } + flash_ptr++; + } + + /* No match, return error. */ + return -1; +} + +static int protect_a_range(u32 value) +{ + u32 reg32; + u8 n; + + /* find a free protection register */ + for (n = 0; n < MAX_ROM_PROTECT_RANGES; n++) { + reg32 = pci_read_config32(SOC_LPC_DEV, ROM_PROTECT_RANGE_REG(n)); + if (!reg32) + break; + } + if (n == MAX_ROM_PROTECT_RANGES) + return -1; /* no free range */ + + pci_write_config32(SOC_LPC_DEV, ROM_PROTECT_RANGE_REG(n), value); + return 0; +} + +/* + * Protect range of SPI flash defined by region using the SPI flash controller. + * + * Note: Up to 4 ranges can be protected, though if a particular region requires more than one + * range, total number of regions decreases accordingly. Each range can be programmed to 4KiB or + * 64KiB granularity. + * + * Warning: If more than 1 region needs protection, and they need mixed protections (read/write) + * than start with the region that requires the most protection. After the restricted commands + * have been written, they can't be changed (write once). So if first region is write protection + * and second region is read protection, it's best to define first region as read and write + * protection. + */ +static int fch_spi_flash_protect(const struct spi_flash *flash, const struct region *region, + const enum ctrlr_prot_type type) +{ + int ret; + u32 reg32, rom_base, range_base; + size_t addr, len, gran_value, total_ranges, range; + bool granularity_64k = true; /* assume 64k granularity */ + + addr = region->offset; + len = region->size; + + reg32 = pci_read_config32(SOC_LPC_DEV, ROM_ADDRESS_RANGE2_START); + rom_base = WORD_TO_DWORD_UPPER(reg32); + if (addr < rom_base) + return -1; + range_base = addr % rom_base; + + /* Define granularity to be used */ + if (GRANULARITY_TEST_4k & range_base) + granularity_64k = false; /* use 4K granularity */ + if (GRANULARITY_TEST_4k & len) + granularity_64k = false; /* use 4K granularity */ + + /* Define the first range and total number of ranges required */ + if (granularity_64k) { + gran_value = 0x00010000; /* 64 KiB */ + range_base = range_base >> 16; + } else { + gran_value = 0x00001000; /* 4 KiB */ + range_base = range_base >> 12; + } + total_ranges = len / gran_value; + range_base &= RANGE_ADDR_MASK; + + /* Create reg32 to be written into a range register and program required ranges */ + reg32 = rom_base & ROM_BASE_MASK; + reg32 |= range_base; + if (granularity_64k) + reg32 |= RANGE_UNIT; + if (type & WRITE_PROTECT) + reg32 |= ROM_RANGE_WP; + if (type & READ_PROTECT) + reg32 |= ROM_RANGE_RP; + + for (range = 0; range < total_ranges; range++) { + ret = protect_a_range(reg32); + if (ret) + return ret; + /* + * Next range (lower 8 bits). Range points to the start address of a region. + * The range value must be multiplied by the granularity (which is also the + * size of the region) to get the actual offset from the SPI start address. + */ + reg32++; + } + + /* define commands to be blocked if in range */ + reg32 = 0; + if (type & WRITE_PROTECT) { + reg32 |= (ctrl_spi_data.write_enable_cmd << 24); + reg32 |= (ctrl_spi_data.write_cmd << 16); + reg32 |= (ctrl_spi_data.erase_cmd << 8); + } + if (type & READ_PROTECT) + reg32 |= ctrl_spi_data.read_cmd; + + /* Final steps to protect region */ + pci_write_config32(SOC_LPC_DEV, SPI_RESTRICTED_CMD1, reg32); + reg32 = spi_read32(SPI_CNTRL0); + reg32 &= ~SPI_ACCESS_MAC_ROM_EN; + spi_write32(SPI_CNTRL0, reg32); + + return 0; +} + +const struct spi_ctrlr fch_spi_flash_ctrlr = { + .max_xfer_size = SPI_FIFO_DEPTH, + .flash_probe = fch_spi_flash_probe, + .flash_protect = fch_spi_flash_protect, +}; + +const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = { + { + .ctrlr = &fch_spi_flash_ctrlr, + .bus_start = 0, + .bus_end = 0, + }, +}; + +const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map); diff --git a/src/soc/amd/common/block/spi/fch_spi_flash.c b/src/soc/amd/common/block/spi/fch_spi_flash.c new file mode 100644 index 0000000000..40dd0e2996 --- /dev/null +++ b/src/soc/amd/common/block/spi/fch_spi_flash.c @@ -0,0 +1,246 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Silverback Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <spi_flash.h> +#include <soc/southbridge.h> +#include <amdblocks/fch_spi.h> +#include <drivers/spi/spi_flash_internal.h> +#include <timer.h> +#include <string.h> + +static void spi_flash_addr(u32 addr, u8 *cmd) +{ + /* cmd[0] is actual command */ + cmd[1] = addr >> 16; + cmd[2] = addr >> 8; + cmd[3] = addr >> 0; +} + +static int crop_chunk(unsigned int cmd_len, unsigned int buf_len) +{ + return min((SPI_FIFO_DEPTH - (cmd_len - 1)), buf_len); +} + +int fch_spi_flash_cmd_write(const u8 *cmd, size_t cmd_len, const void *data, size_t data_len) +{ + int ret; + u8 buff[SPI_FIFO_DEPTH + 1]; + + if ((cmd_len + data_len) > SPI_FIFO_DEPTH) + return -1; + memcpy(buff, cmd, cmd_len); + memcpy(buff + cmd_len, data, data_len); + + ret = fch_spi_flash_cmd(buff, cmd_len + data_len, NULL, 0); + if (ret) { + printk(BIOS_WARNING, "FCH_SF: Failed to send write command (%zu bytes): %d\n", + data_len, ret); + } + + return ret; +} + +static int fch_spi_flash_status(const struct spi_flash *flash, uint8_t *reg) +{ + int ret; + u8 status, cmd = CMD_READ_STATUS; + + ret = fch_spi_flash_cmd(&cmd, 1, &status, 1); + if (!ret) + *reg = status; + return ret; +} + +int fch_spi_wait_cmd_ready(unsigned long timeout) +{ + struct mono_time current, end; + int ret; + u8 status; + + timer_monotonic_get(¤t); + end = current; + mono_time_add_msecs(&end, timeout); + + do { + ret = fch_spi_flash_status(NULL, &status); + if (ret) + return -1; + if ((status & STATUS_WIP) == 0) + return 0; + timer_monotonic_get(¤t); + } while (!mono_time_after(¤t, &end)); + + printk(BIOS_DEBUG, "FCH_SF: timeout at %ld msec\n", timeout); + return -1; +} + +static int fch_spi_flash_erase(const struct spi_flash *flash, uint32_t offset, size_t len) +{ + u32 start, end, erase_size; + const struct spi_data *spi_data_ptr = get_ctrl_spi_data(); + int ret = -1; + u8 cmd[4]; + + erase_size = spi_data_ptr->sector_size; + if (offset % erase_size || len % erase_size) { + printk(BIOS_WARNING, "%s: Erase offset/length not multiple of erase size\n", + spi_data_ptr->name); + return -1; + } + if (len == 0) { + printk(BIOS_WARNING, "%s: Erase length cannot be 0\n", spi_data_ptr->name); + return -1; + } + + cmd[0] = spi_data_ptr->erase_cmd; + start = offset; + end = start + len; + + while (offset < end) { + spi_flash_addr(offset, cmd); + offset += erase_size; + +#if CONFIG(SOC_AMD_COMMON_BLOCK_SPI_DEBUG) + printk(BIOS_DEBUG, "FCH_SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1], + cmd[2], cmd[3], offset); +#endif + ret = fch_spi_enable_write(); + if (ret) + goto out; + + ret = fch_spi_flash_cmd_write(cmd, sizeof(cmd), NULL, 0); + if (ret) + goto out; + + ret = fch_spi_wait_cmd_ready(SPI_FLASH_PAGE_ERASE_TIMEOUT_MS); + if (ret) + goto out; + } + + printk(BIOS_DEBUG, "%s: Successfully erased %zu bytes @ %#x\n", spi_data_ptr->name, len, + start); + +out: + return ret; +} + +static int fch_spi_flash_read(const struct spi_flash *flash, uint32_t offset, size_t len, + void *buf) +{ + const struct spi_data *spi_data_ptr = get_ctrl_spi_data(); + uint8_t *data = buf; + int ret; + size_t xfer_len; + u8 cmd[5]; + + cmd[0] = spi_data_ptr->read_cmd; + cmd[4] = 0; + while (len) { + xfer_len = crop_chunk(spi_data_ptr->read_cmd_len, len); + spi_flash_addr(offset, cmd); + ret = fch_spi_flash_cmd(cmd, spi_data_ptr->read_cmd_len, data, xfer_len); + if (ret) { + printk(BIOS_WARNING, + "FCH_SF: Failed to send read command %#.2x(%#x, %#zx): %d\n", + cmd[0], offset, xfer_len, ret); + return ret; + } + offset += xfer_len; + data += xfer_len; + len -= xfer_len; + } + return 0; +} + +static int fch_spi_flash_write(const struct spi_flash *flash, uint32_t offset, size_t len, + const void *buf) +{ + unsigned long byte_addr; + unsigned long page_size; + const struct spi_data *spi_data_ptr = get_ctrl_spi_data(); + size_t chunk_len; + size_t actual, start = 0; + int ret = 0; + u8 cmd[4]; + + page_size = spi_data_ptr->page_size; + if (spi_data_ptr->non_standard == NON_STANDARD_SPI_SST) { + if (offset % 2) { + ret = non_standard_sst_byte_write(offset, buf); + len--; + start++; + offset++; + if (ret) + return ret; + } + if (page_size == 2) + return non_standard_sst_write_aai(offset, len, buf, start); + } + + for (actual = start; actual < len; actual += chunk_len) { + byte_addr = offset % page_size; + chunk_len = min(len - actual, page_size - byte_addr); + chunk_len = crop_chunk(sizeof(cmd), chunk_len); + + cmd[0] = spi_data_ptr->write_cmd; + cmd[1] = (offset >> 16) & 0xff; + cmd[2] = (offset >> 8) & 0xff; + cmd[3] = offset & 0xff; +#if CONFIG(SOC_AMD_COMMON_BLOCK_SPI_DEBUG) + printk(BIOS_DEBUG, "PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu" + "\n", buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); +#endif + + ret = fch_spi_enable_write(); + if (ret < 0) { + printk(BIOS_WARNING, "%s: Enabling Write failed\n", spi_data_ptr->name); + goto out; + } + + ret = fch_spi_flash_cmd_write(cmd, sizeof(cmd), buf + actual, chunk_len); + if (ret < 0) { + printk(BIOS_WARNING, "%s: Page Program failed\n", spi_data_ptr->name); + goto out; + } + + ret = fch_spi_wait_cmd_ready(SPI_FLASH_PROG_TIMEOUT_MS); + if (ret) + goto out; + + offset += chunk_len; + } + +#if CONFIG(SOC_AMD_COMMON_BLOCK_SPI_DEBUG) + printk(BIOS_DEBUG, "%s: Successfully programmed %zu bytes @ 0x%lx\n", + spi_data_ptr->name, len, (unsigned long)(offset - len)); +#endif + ret = 0; + +out: + return ret; +} + +static const struct spi_flash_ops fch_spi_flash_ops = { + .read = fch_spi_flash_read, + .write = fch_spi_flash_write, + .erase = fch_spi_flash_erase, + .status = fch_spi_flash_status, +}; + +void fch_spi_flash_ops_init(struct spi_flash *flash) +{ + flash->ops = &fch_spi_flash_ops; +} diff --git a/src/soc/amd/common/block/spi/fch_spi_special.c b/src/soc/amd/common/block/spi/fch_spi_special.c new file mode 100644 index 0000000000..456a3896f5 --- /dev/null +++ b/src/soc/amd/common/block/spi/fch_spi_special.c @@ -0,0 +1,89 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Silverback Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <spi-generic.h> +#include <amdblocks/fch_spi.h> +#include <string.h> + +int non_standard_sst_byte_write(u32 offset, const void *buf) +{ + int ret; + u8 cmd[4] = { + CMD_SST_BP, + offset >> 16, + offset >> 8, + offset, + }; + + ret = fch_spi_enable_write(); + if (ret) + return ret; + + ret = fch_spi_flash_cmd_write(cmd, sizeof(cmd), buf, 1); + if (ret) + return ret; + + return fch_spi_wait_cmd_ready(SPI_FLASH_PROG_TIMEOUT_MS); +} + +int non_standard_sst_write_aai(u32 offset, size_t len, const void *buf, size_t start) +{ + size_t actual, cmd_len; + int ret = 0; + u8 cmd[4]; + + ret = fch_spi_enable_write(); + if (ret) + goto done; + + cmd_len = 4; + cmd[0] = CMD_SST_AAI_WP; + cmd[1] = offset >> 16; + cmd[2] = offset >> 8; + cmd[3] = offset; + + for (actual = start; actual < len - 1; actual += 2) { +#if CONFIG(SOC_AMD_COMMON_BLOCK_SPI_DEBUG) + printk(BIOS_DEBUG, "PP: 0x%p => cmd = { 0x%02x 0x%06lx }" + " chunk_len = 2\n", + buf + actual, cmd[0], (offset + actual)); +#endif + + ret = fch_spi_enable_write(); + if (ret < 0) { + printk(BIOS_WARNING, "SF: Enabling Write failed\n"); + break; + } + + ret = fch_spi_flash_cmd_write(cmd, cmd_len, buf + actual, 2); + if (ret < 0) { + printk(BIOS_WARNING, "SF: SST word Program failed\n"); + break; + } + + ret = fch_spi_wait_cmd_ready(SPI_FLASH_PROG_TIMEOUT_MS); + if (ret) + break; + + offset += 2; + cmd_len = 1; + } + /* If there is a single trailing byte, write it out */ + if (!ret && actual != len) + ret = non_standard_sst_byte_write(offset, buf + actual); +done: + return ret; +} diff --git a/src/soc/amd/common/block/spi/fch_spi_table.c b/src/soc/amd/common/block/spi/fch_spi_table.c new file mode 100644 index 0000000000..8c0108a6e5 --- /dev/null +++ b/src/soc/amd/common/block/spi/fch_spi_table.c @@ -0,0 +1,83 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Silverback Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <spi_flash.h> +#include <amdblocks/fch_spi.h> +#include <drivers/spi/spi_flash_internal.h> + +/* + * The following table holds all device probe functions + * + * shift: number of continuation bytes before the ID + * idcode: the expected IDCODE or 0xff for non JEDEC devices + * probe: the function to call + * + * Non JEDEC devices should be ordered in the table such that + * the probe functions with best detection algorithms come first. + * + * Several matching entries are permitted, they will be tried + * in sequence until a probe function returns non NULL. + * + * IDCODE_CONT_LEN may be redefined if a device needs to declare a + * larger "shift" value. IDCODE_PART_LEN generally shouldn't be + * changed. This is the max number of bytes probe functions may + * examine when looking up part-specific identification info. + * + * Probe functions will be given the idcode buffer starting at their + * manu id byte (the "idcode" in the table below). In other words, + * all of the continuation bytes will be skipped (the "shift" below). + */ + +const struct spi_flash_table flashes[] = { + /* Keep it sorted by define name */ +#if CONFIG(SPI_FLASH_ADESTO) + { 0, VENDOR_ID_ADESTO, spi_flash_probe_adesto, }, +#endif +#if CONFIG(SPI_FLASH_AMIC) + { 0, VENDOR_ID_AMIC, spi_flash_probe_amic, }, +#endif +#if CONFIG(SPI_FLASH_ATMEL) + { 0, VENDOR_ID_ATMEL, spi_flash_probe_atmel, }, +#endif +#if CONFIG(SPI_FLASH_EON) + { 0, VENDOR_ID_EON, spi_flash_probe_eon, }, +#endif +#if CONFIG(SPI_FLASH_GIGADEVICE) + { 0, VENDOR_ID_GIGADEVICE, spi_flash_probe_gigadevice, }, +#endif +#if CONFIG(SPI_FLASH_MACRONIX) + { 0, VENDOR_ID_MACRONIX, spi_flash_probe_macronix, }, +#endif +#if CONFIG(SPI_FLASH_SPANSION) + { 0, VENDOR_ID_SPANSION, spi_flash_probe_spansion, }, +#endif +#if CONFIG(SPI_FLASH_SST) + { 0, VENDOR_ID_SST, spi_flash_probe_sst, }, +#endif +#if CONFIG(SPI_FLASH_STMICRO) + { 0, VENDOR_ID_STMICRO, spi_flash_probe_stmicro, }, + { 0, VENDOR_ID_STMICRO_FF, spi_flash_probe_stmicro, }, +#endif +#if CONFIG(SPI_FLASH_WINBOND) + { 0, VENDOR_ID_WINBOND, spi_flash_probe_winbond, }, +#endif + /* Keep it sorted by best detection */ +}; + +const struct spi_flash_table *get_spi_flash_table(int *table_size) +{ + *table_size = (int)ARRAY_SIZE(flashes); + return &flashes[0]; +} |