diff options
Diffstat (limited to 'src/soc/amd/stoneyridge/Kconfig')
| -rw-r--r-- | src/soc/amd/stoneyridge/Kconfig | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/src/soc/amd/stoneyridge/Kconfig b/src/soc/amd/stoneyridge/Kconfig new file mode 100644 index 0000000000..4cd3116ecd --- /dev/null +++ b/src/soc/amd/stoneyridge/Kconfig @@ -0,0 +1,167 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2017 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +config SOC_AMD_STONEYRIDGE + bool + select IOAPIC + select HAVE_USBDEBUG_OPTIONS + select HAVE_HARD_RESET + select SOC_AMD_COMMON + +if SOC_AMD_STONEYRIDGE + +config BOOTBLOCK_SOUTHBRIDGE_INIT + string + default "soc/amd/stoneyridge/bootblock/bootblock.c" + +config SOUTHBRIDGE_AMD_STONEYRIDGE_SKIP_ISA_DMA_INIT + bool + default n + +config EHCI_BAR + hex + default 0xfef00000 + +config STONEYRIDGE_XHCI_ENABLE + bool "Enable Stoney Ridge XHCI Controller" + default y + help + The XHCI controller must be enabled and the XHCI firmware + must be added in order to have USB 3.0 support configured + by coreboot. The OS will be responsible for enabling the XHCI + controller if the the XHCI firmware is available but the + XHCI controller is not enabled by coreboot. + +config STONEYRIDGE_XHCI_FWM + bool "Add xhci firmware" + default y + help + Add Stoney Ridge XHCI Firmware to support the onboard USB 3.0 + +config STONEYRIDGE_IMC_FWM + bool "Add IMC firmware" + default n + help + Add Stoney Ridge IMC Firmware to support the onboard fan control + +config STONEYRIDGE_GEC_FWM + bool + default n + help + Add Stoney Ridge GEC Firmware to support the onboard gigabit Ethernet MAC. + Must be connected to a Broadcom B50610 or B50610M PHY on the motherboard. + +config STONEYRIDGE_XHCI_FWM_FILE + string "XHCI firmware path and filename" + default "3rdparty/blobs/southbridge/amd/kern/xhci.bin" + depends on STONEYRIDGE_XHCI_FWM + +config STONEYRIDGE_IMC_FWM_FILE + string "IMC firmware path and filename" + default "3rdparty/blobs/southbridge/amd/kern/imc.bin" + depends on STONEYRIDGE_IMC_FWM + +config STONEYRIDGE_GEC_FWM_FILE + string "GEC firmware path and filename" + depends on STONEYRIDGE_GEC_FWM + +config AMD_PUBKEY_FILE + string "AMD public Key" + default "3rdparty/blobs/southbridge/amd/kern/PSP/AmdPubKeyST.bin" + +config STONEYRIDGE_SATA_MODE + int "SATA Mode" + default 0 + range 0 6 + help + Select the mode in which SATA should be driven. + The default is NATIVE. + 0: NATIVE mode does not require a ROM. + 2: AHCI may work with or without AHCI ROM. It depends on the payload support. + For example, seabios does not require the AHCI ROM. + 3: LEGACY IDE + 4: IDE to AHCI + 5: AHCI7804: ROM Required, and AMD driver required in the OS. + 6: IDE to AHCI7804: ROM Required, and AMD driver required in the OS. + +comment "NATIVE" + depends on STONEYRIDGE_SATA_MODE = 0 + +comment "AHCI" + depends on STONEYRIDGE_SATA_MODE = 2 + +comment "LEGACY IDE" + depends on STONEYRIDGE_SATA_MODE = 3 + +comment "IDE to AHCI" + depends on STONEYRIDGE_SATA_MODE = 4 + +comment "AHCI7804" + depends on STONEYRIDGE_SATA_MODE = 5 + +comment "IDE to AHCI7804" + depends on STONEYRIDGE_SATA_MODE = 6 + +if STONEYRIDGE_SATA_MODE = 2 || STONEYRIDGE_SATA_MODE = 5 + +config AHCI_ROM_ID + string "AHCI device PCI IDs" + default "1022,7801" if STONEYRIDGE_SATA_MODE = 2 + default "1022,7804" if STONEYRIDGE_SATA_MODE = 5 + +endif # STONEYRIDGE_SATA_MODE = 2 || STONEYRIDGE_SATA_MODE = 5 + +config STONEYRIDGE_LEGACY_FREE + bool "System is legacy free" + help + Select y if there is no keyboard controller in the system. + This sets variables in AGESA and ACPI. + +config AMDFW_OUTSIDE_CBFS + def_bool n + help + The AMDFW (PSP) is typically locatable in cbfs. Select this + option to manually attach the generated amdfw.rom at an + offset of 0x20000 from the bottom of the coreboot ROM image. + +config SERIRQ_CONTINUOUS_MODE + bool + default n + help + Set this option to y for serial IRQ in continuous mode. + Otherwise it is in quiet mode. + +config STONEYRIDGE_ACPI_IO_BASE + hex + default 0x400 + help + Base address for the ACPI registers. + This value must match the hardcoded value of AGESA. + +config STONEYRIDGE_UART + bool "UART controller on Stoney Ridge" + default n + select DRIVERS_UART_8250MEM + select DRIVERS_UART_8250MEM_32 + select NO_UART_ON_SUPERIO + select UART_OVERRIDE_REFCLK + help + There are two UART controllers in Stoney Ridge. + The UART registers are memory-mapped. UART + controller 0 registers range from FEDC_6000h + to FEDC_6FFFh. UART controller 1 registers + range from FEDC_8000h to FEDC_8FFFh. + +endif # SOC_AMD_STONEYRIDGE |