diff options
Diffstat (limited to 'src/soc/amd/picasso')
| -rw-r--r-- | src/soc/amd/picasso/Kconfig | 1 | ||||
| -rw-r--r-- | src/soc/amd/picasso/Makefile.inc | 3 | ||||
| -rw-r--r-- | src/soc/amd/picasso/sm.c | 103 | ||||
| -rw-r--r-- | src/soc/amd/picasso/smbus.c | 196 |
4 files changed, 1 insertions, 302 deletions
diff --git a/src/soc/amd/picasso/Kconfig b/src/soc/amd/picasso/Kconfig index 7561414c55..acceb00cad 100644 --- a/src/soc/amd/picasso/Kconfig +++ b/src/soc/amd/picasso/Kconfig @@ -47,6 +47,7 @@ config CPU_SPECIFIC_OPTIONS select SOC_AMD_COMMON_BLOCK_PCI select SOC_AMD_COMMON_BLOCK_HDA select SOC_AMD_COMMON_BLOCK_SATA + select SOC_AMD_COMMON_BLOCK_SMBUS select BOOT_DEVICE_SUPPORTS_WRITES if BOOT_DEVICE_SPI_FLASH select BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY if BOOT_DEVICE_SPI_FLASH select PARALLEL_MP diff --git a/src/soc/amd/picasso/Makefile.inc b/src/soc/amd/picasso/Makefile.inc index f1e10c183f..680f0fa956 100644 --- a/src/soc/amd/picasso/Makefile.inc +++ b/src/soc/amd/picasso/Makefile.inc @@ -41,7 +41,6 @@ romstage-y += i2c.c romstage-y += romstage.c romstage-y += gpio.c romstage-y += pmutil.c -romstage-y += smbus.c romstage-y += memmap.c romstage-$(CONFIG_PICASSO_UART) += uart.c romstage-y += tsc_freq.c @@ -71,8 +70,6 @@ ramstage-y += northbridge.c ramstage-y += pmutil.c ramstage-y += acp.c ramstage-y += sata.c -ramstage-y += sm.c -ramstage-y += smbus.c ramstage-y += memmap.c ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi_util.c diff --git a/src/soc/amd/picasso/sm.c b/src/soc/amd/picasso/sm.c deleted file mode 100644 index f0ba559f3b..0000000000 --- a/src/soc/amd/picasso/sm.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <device/smbus.h> -#include <device/smbus_host.h> -#include <cpu/x86/lapic.h> -#include <arch/ioapic.h> -#include <soc/southbridge.h> - -/* -* The southbridge enables all USB controllers by default in SMBUS Control. -* The southbridge enables SATA by default in SMBUS Control. -*/ - -static void sm_init(struct device *dev) -{ - setup_ioapic(VIO_APIC_VADDR, CONFIG_MAX_CPUS); -} - -static u32 get_sm_mmio(struct device *dev) -{ - struct resource *res; - struct bus *pbus; - - pbus = get_pbus_smbus(dev); - res = find_resource(pbus->dev, 0x90); - if (res->base == SMB_BASE_ADDR) - return ACPIMMIO_SMBUS_BASE; - - return ACPIMMIO_ASF_BASE; -} - -static int lsmbus_recv_byte(struct device *dev) -{ - u8 device; - - device = dev->path.i2c.device; - return do_smbus_recv_byte(get_sm_mmio(dev), device); -} - -static int lsmbus_send_byte(struct device *dev, u8 val) -{ - u8 device; - - device = dev->path.i2c.device; - return do_smbus_send_byte(get_sm_mmio(dev), device, val); -} - -static int lsmbus_read_byte(struct device *dev, u8 address) -{ - u8 device; - - device = dev->path.i2c.device; - return do_smbus_read_byte(get_sm_mmio(dev), device, address); -} - -static int lsmbus_write_byte(struct device *dev, u8 address, u8 val) -{ - u8 device; - - device = dev->path.i2c.device; - return do_smbus_write_byte(get_sm_mmio(dev), device, address, val); -} -static struct smbus_bus_operations lops_smbus_bus = { - .recv_byte = lsmbus_recv_byte, - .send_byte = lsmbus_send_byte, - .read_byte = lsmbus_read_byte, - .write_byte = lsmbus_write_byte, -}; - -static struct pci_operations lops_pci = { - .set_subsystem = pci_dev_set_subsystem, -}; -static struct device_operations smbus_ops = { - .read_resources = DEVICE_NOOP, - .set_resources = DEVICE_NOOP, - .enable_resources = pci_dev_enable_resources, - .init = sm_init, - .scan_bus = scan_smbus, - .ops_pci = &lops_pci, - .ops_smbus_bus = &lops_smbus_bus, -}; -static const struct pci_driver smbus_driver __pci_driver = { - .ops = &smbus_ops, - .vendor = PCI_VENDOR_ID_AMD, - .device = PCI_DEVICE_ID_AMD_CZ_SMBUS, -}; diff --git a/src/soc/amd/picasso/smbus.c b/src/soc/amd/picasso/smbus.c deleted file mode 100644 index 5474c5cd45..0000000000 --- a/src/soc/amd/picasso/smbus.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <console/console.h> -#include <device/smbus_host.h> -#include <amdblocks/acpimmio.h> -#include <soc/southbridge.h> - -/* - * Between 1-10 seconds, We should never timeout normally - * Longer than this is just painful when a timeout condition occurs. - */ -#define SMBUS_TIMEOUT (100 * 1000 * 10) - -static u8 controller_read8(uintptr_t base, u8 reg) -{ - switch (base) { - case ACPIMMIO_SMBUS_BASE: - return smbus_read8(reg); - case ACPIMMIO_ASF_BASE: - return asf_read8(reg); - default: - printk(BIOS_ERR, "Error attempting to read SMBus at address 0x%lx\n", - base); - } - return 0xff; -} - -static void controller_write8(uintptr_t base, u8 reg, u8 val) -{ - switch (base) { - case ACPIMMIO_SMBUS_BASE: - smbus_write8(reg, val); - break; - case ACPIMMIO_ASF_BASE: - asf_write8(reg, val); - break; - default: - printk(BIOS_ERR, "Error attempting to write SMBus at address 0x%lx\n", - base); - } -} - -static int smbus_wait_until_ready(uintptr_t mmio) -{ - u32 loops; - loops = SMBUS_TIMEOUT; - do { - u8 val; - val = controller_read8(mmio, SMBHSTSTAT); - val &= SMBHST_STAT_VAL_BITS; - if (val == 0) { /* ready now */ - return 0; - } - controller_write8(mmio, SMBHSTSTAT, val); - } while (--loops); - return -2; /* time out */ -} - -static int smbus_wait_until_done(uintptr_t mmio) -{ - u32 loops; - loops = SMBUS_TIMEOUT; - do { - u8 val; - - val = controller_read8(mmio, SMBHSTSTAT); - val &= SMBHST_STAT_VAL_BITS; /* mask off reserved bits */ - if (val & SMBHST_STAT_ERROR_BITS) - return -5; /* error */ - if (val == SMBHST_STAT_NOERROR) { - controller_write8(mmio, SMBHSTSTAT, val); /* clr sts */ - return 0; - } - } while (--loops); - return -3; /* timeout */ -} - -int do_smbus_recv_byte(uintptr_t mmio, u8 device) -{ - u8 byte; - - if (smbus_wait_until_ready(mmio) < 0) - return -2; /* not ready */ - - /* set the device I'm talking to */ - controller_write8(mmio, SMBHSTADDR, ((device & 0x7f) << 1) | 1); - - byte = controller_read8(mmio, SMBHSTCTRL); - byte &= ~SMBHST_CTRL_MODE_BITS; /* Clear [4:2] */ - byte |= SMBHST_CTRL_STRT | SMBHST_CTRL_BTE_RW; /* set mode, start */ - controller_write8(mmio, SMBHSTCTRL, byte); - - /* poll for transaction completion */ - if (smbus_wait_until_done(mmio) < 0) - return -3; /* timeout or error */ - - /* read results of transaction */ - byte = controller_read8(mmio, SMBHSTDAT0); - - return byte; -} - -int do_smbus_send_byte(uintptr_t mmio, u8 device, u8 val) -{ - u8 byte; - - if (smbus_wait_until_ready(mmio) < 0) - return -2; /* not ready */ - - /* set the command... */ - controller_write8(mmio, SMBHSTDAT0, val); - - /* set the device I'm talking to */ - controller_write8(mmio, SMBHSTADDR, ((device & 0x7f) << 1) | 0); - - byte = controller_read8(mmio, SMBHSTCTRL); - byte &= ~SMBHST_CTRL_MODE_BITS; /* Clear [4:2] */ - byte |= SMBHST_CTRL_STRT | SMBHST_CTRL_BTE_RW; /* set mode, start */ - controller_write8(mmio, SMBHSTCTRL, byte); - - /* poll for transaction completion */ - if (smbus_wait_until_done(mmio) < 0) - return -3; /* timeout or error */ - - return 0; -} - -int do_smbus_read_byte(uintptr_t mmio, u8 device, u8 address) -{ - u8 byte; - - if (smbus_wait_until_ready(mmio) < 0) - return -2; /* not ready */ - - /* set the command/address... */ - controller_write8(mmio, SMBHSTCMD, address & 0xff); - - /* set the device I'm talking to */ - controller_write8(mmio, SMBHSTADDR, ((device & 0x7f) << 1) | 1); - - byte = controller_read8(mmio, SMBHSTCTRL); - byte &= ~SMBHST_CTRL_MODE_BITS; /* Clear [4:2] */ - byte |= SMBHST_CTRL_STRT | SMBHST_CTRL_BDT_RW; /* set mode, start */ - controller_write8(mmio, SMBHSTCTRL, byte); - - /* poll for transaction completion */ - if (smbus_wait_until_done(mmio) < 0) - return -3; /* timeout or error */ - - /* read results of transaction */ - byte = controller_read8(mmio, SMBHSTDAT0); - - return byte; -} - -int do_smbus_write_byte(uintptr_t mmio, u8 device, u8 address, u8 val) -{ - u8 byte; - - if (smbus_wait_until_ready(mmio) < 0) - return -2; /* not ready */ - - /* set the command/address... */ - controller_write8(mmio, SMBHSTCMD, address & 0xff); - - /* set the device I'm talking to */ - controller_write8(mmio, SMBHSTADDR, ((device & 0x7f) << 1) | 0); - - /* output value */ - controller_write8(mmio, SMBHSTDAT0, val); - - byte = controller_read8(mmio, SMBHSTCTRL); - byte &= ~SMBHST_CTRL_MODE_BITS; /* Clear [4:2] */ - byte |= SMBHST_CTRL_STRT | SMBHST_CTRL_BDT_RW; /* set mode, start */ - controller_write8(mmio, SMBHSTCTRL, byte); - - /* poll for transaction completion */ - if (smbus_wait_until_done(mmio) < 0) - return -3; /* timeout or error */ - - return 0; -} |